Rectified photocurrent of molecular photodiode consisting of cytochrome c/GFP hetero thin films.

Photoinduced electron transfer in the molecular electronic device consisting of protein-adsorbed hetero Langmuir–Blodgett (LB) film was investigated. Three kinds of functional molecules, cytochrome c, viologen, and green fluorescent protein (GFP) were used as an electron acceptor, a mediator, and a sensitizer, respectively. The hetero-LB film was fabricated by subsequently depositing cytochrome c and viologen onto the pretreated ITO or quartz glass. GFP adsorbed hetero-LB films were prepared by soaking the hetero-LB films into the buffer solution containing GFP. The MIM (metal/insulator/metal) structured molecular device was constructed by depositing aluminum onto the surface of the GFP-adsorbed hetero LB films. Due to the excitation by irradiation with a 460 nm monochromic light source, the photoinduced unidirectional flow of electrons in the MIM device could be achieved and was detected as photocurrents. The photoswitching function was achieved and the rectifying characteristic was observed in the molecular device. Based on the measurement of transient photocurrent of molecular device, the unidirectional flow of electrons was verified.     

Rectified photocurrent of molecular photodiode consisting of cytochrome c/GFP hetero thin films

Photoinduced electron transfer in the molecular electronic device consisting of protein-adsorbed hetero Langmuir–Blodgett (LB) film was investigated. Three kinds of functional molecules, cytochrome c, viologen, and green fluorescent protein (GFP) were used as an electron acceptor, a mediator, and a sensitizer, respectively. The hetero-LB film was fabricated by subsequently depositing cytochrome c and viologen onto the pretreated ITO or quartz glass. GFP adsorbed hetero-LB films were prepared by soaking the hetero-LB films into the buffer solution containing GFP. The MIM (metal/insulator/metal) structured molecular device was constructed by depositing aluminum onto the surface of the GFP-adsorbed hetero LB films. Due to the excitation by irradiation with a 460 nm monochromic light source, the photoinduced unidirectional flow of electrons in the MIM device could be achieved and was detected as photocurrents. The photoswitching function was achieved and the rectifying characteristic was observed in the molecular device. Based on the measurement of transient photocurrent of molecular device, the unidirectional flow of electrons was verified.     

Photoelectrochemical biofuel cell using porphyrin-sensitized nanocrystalline titanium dioxide mesoporous film as photoanode

Electrical energy generated directly from sunlight and biomass solution with a Photoelectrochemical Biofuel Cell (PEBFC) was investigated. The PEBFC consisted of a meso-tetrakis(4-carboxyphenyl)porphyrin (TCPP)-sensitized nanocrystalline titanium dioxide (TiO(2)) mesoporous film (NTDMF) as the photoanode and platinum black as the cathode. The interaction between TCPP sensitizer and NTDMF was evaluated by X-ray photoelectron spectra and FT-IR absorption spectra, indicating that the TCPP sensitizer was adsorbed on the NTDMF by bridging or bidentate coordinate bonds. The spectroscopic properties of pure TCPP ethanol solution and TCPP-sensitized NTDMF were obtained by UV-vis absorption spectra, demonstrating that the characteristic absorption peaks of TCPP on NTDMF displayed slight red shift compared with pure TCPP ethanol solution. The performances of the PEBFC were obtained by photocurrent-photovoltage characteristic curves. The open-circuit photovoltage (V(oc)), the short-circuit photocurrent (I(sc)) and the maximum power density (P(max)) was 0.74 V, 69.96 μA and 33.94 μWcm(-2) at 0.45 V, respectively. The fill factor (FF) was 0.19 and the incident photo-to-current efficiency (IPCE) was 36.0% at 436 nm. The results demonstrated that the TCPP was an appropriate photosensitizer for PEBFC.     

Effect of axially coordinated pi-acid ligands on photovoltaic properties of Zn-tetraphenylporphyrin

Following our earlier observations that the well known doping effect of oxygen and water on electrical properties of porphyrin and phthalocyanine films may be attributed to a pi-acid axial interaction throughout the film in the case of PdTPP, we have compared Zn-TPP films supported on transparent n-doped SnO₂ electrodes which had been treated with several pi-acids in contact with an electrolyte to give photoelectrochemical cells. Photovoltages obtained in contact with a series of solution couples were used to obtain approximate photo flat band potentials. The doped films were examined by magnetic circular dichroism (MCD) spectroscopy so that the electronic effect of the dopant could be diagnosed. It was found that pi-acid dopants cause shifts to low energy in the band which indicates “hole stabilization” in the order pyridine < CO < triphenylarsine. The potentials of zero photopotential ‘E_FB’, correlate approximately with spectral shifts. It is concluded that manipulation of axial ligand dopants is a promising method for design of metal porphyrin and perhaps phthalocyanine films with desired photovoltaic properties.     

Bioelectronic device consisting of cytochrome c/poly-L-aspartic acid adsorbed hetero-Langmuir-Blodgett films

A bioelectronic device consisting of protein-adsorbed hetero-Langmuir-Blodgett (LB) films was investigated. Four kinds of functional molecules, cytochrome c, viologen, flavin, and ferrocene, were used as a secondary electron acceptor (A2), a first electron acceptor (A1), a sensitizer (S), and an electron donor (D), respectively. To fabricate the cytochrome c adsorbed hetero-LB film, poly-L-aspartic acid was used as the bridging molecule. The hetero-LB film was fabricated by subsequently depositing ferrocene, flavin, and viologen onto the pretreated ITO glass. Cytochrome c-adsorbed hetero-LB films were prepared by the adsorption of cytochrome c onto the poly-L-aspartic acid treated-LB films by intermolecular electrostatic attraction. Finally, the MIM (metal/insulator/metal) structured molecular device was constructed by depositing aluminum onto the surface of the cytochrome c-adsorbed hetero-LB films. Hetero-LB films were analyzed by Atomic Force Microscopy (AFM), and cytochrome c adsorption onto the films confirmed. The photoswitching function was achieved and the photoinduced unidirectional flow was in accordance with the rectifying characteristics of the molecular device. The direction of energy flow was in accordance with the energy level profile across molecular films. Based on the measurement of the transient photocurrent of the molecular device efficient directional flow of photocurrent through the redox potential difference was observed. The photodiode characteristics of the proposed bio-electronic device were verified and the proposed molecular array mimicking the photosynthetic reaction center could be usefully applied as a model system for the development of the bio-molecular photodiode.     

Photovoltaic conversion using Zn chlorophyll derivative assembled in hydrophobic domain onto nanocrystalline TiO2 electrode

Photovoltaic conversion using zinc chlorin-e6 (ZnChl-e6), which is zinc chlorophyll-a derivative, and fatty acid (myristic acid or cholic acid) co-adsorbed nanocrystalline TiO2 layer onto ITO glass (OTE) electrode is developed. The maximum peaks of photocurrent action spectrum of the ZnChl-e6 adsorbed TiO2 layer onto OTE (ZnChl-e6/TiO2) are 400, 660 and 800 nm, respectively. Especially the IPCE value at 800 nm (7.5%) is larger than that of 660 nm (6.9%). This result indicates that ZnChl-e6 molecules is aggregated or formed dimer on a nanocrystalline TiO2 layer onto OTE and the absorption band is shifted to near IR region. The photocurrent action spectrum of ZnChl-e6 and cholic acid adsorbed TiO2 layer onto OTE (ZnChl-e6-Cho/TiO2 is similar to that of the UV-vis absorption spectrum in methanol solution, and IPCE values at 400 and 660 nm (8.1%) increase and the IPCE value at 800 nm (4.1%) decreases, indicating that the aggregation of ZnChl-e6 molecules on the TiO2 is suppressed by cholic acid. By using ZnChl-e6-Cho/TiO2, the short-circuit photocurrent density and open-circuit photovoltage also increase compared with that of ZnChl-e6 adsorbed nanocrystalline TiO2 electrode.     

Optical and electronic coupling of the redox copper Azurin on ITO-coated quartz substrate

We have investigated the hybrid system constituted by the redox copper protein Azurin integrated with the semiconductor indium tin oxide (ITO) coated on quartz substrate. The system appears to be a good candidate for bio-sensing and bio-optoelectronics applications, especially due to the coupling between the optical and electron transfer features of Azurin with the conductive properties and optical transparency of ITO. The optical, morphological and electrical properties of the system have been investigated by combining optical absorption and transmission, steady-state fluorescence, resonance Raman spectroscopy and scanning probe microscopies. We found that Azurin molecules are firmly anchored on ITO and retain their structural and optical features underlying the physiological electron transfer activity. Scanning tunnelling spectroscopy evidenced a good electric coupling between the protein molecules and the substrate and a concomitant modulation of the ITO semiconductor properties upon deposition of Azurin. Some interplay between the conduction and valence bands of ITO and the electronic levels of Azurin is therefore suggested. These results are of a significant relevance in the perspective of developing bio-nanodevices able to process both optical and electrical signals, in conjugation also with the biorecognition capability of the protein molecules.     

Tuning the optical and photoelectrochemical properties of surface-modified TiO2.

Surface-modification of TiO(2) is found to be a powerful tool for manipulating the fundamental optical and photoelectrochemical properties of TiO(2). High surface area nanocrystalline TiO(2) was modified by urea pyrolysis products at different temperatures between 300 degrees C and 500 degrees C. Modification occurs through incorporation of nitrogen species containing carbon into the surface structure of titania. The N1s XPS binding energies are 399-400 eV and decrease with increasing modification temperature whereby the Ti2p(3/2) peak is also shifted to lower binding energies by about 0.5 eV. With increasing modification temperature the optical bandgap of surface-modified TiO(2) continuously decreases down to approximately 2.1 eV and the quasi-Fermi level of electrons at pH 7 is gradually shifted from -0.6 V to -0.3 V vs. NHE. The surface-modified materials show enhanced sub-bandgap absorption (Urbach tail) and exhibit photocurrents in the visible down to 750 nm. The maximum incident photon-to-current efficiency (IPCE) was observed for the materials modified at 350 degrees C and 400 degrees C (IPCE approximately 14% at 400 nm, and IPCE approximately 1% at 550 nm, respectively). The efficiency of photocurrent generation is limited by surface recombination, which leads to a significant decrease in IPCE values and significantly changes the shape of the IPCE spectra in dependence on the optical bandgap.     

Plateau distributions of DNA fragment lengths produced by extended light exposure of extranuclear photosensitizers in human cells.

We have exploited properties of photosensitizers to study an aspect of the packing of chromatin in the cell nucleus. The fluorescent photosensitizers mesotetra(3-hydroxyphenyl) porphyrin and Photofrin II were both localized in the nuclear membrane and other membrane structures, but could not be found inside the nuclei. Light exposure of cells at 1 degrees C in the presence of the sensitizers induced DNA double-strand breaks. The length distributions of DNA fragments were determined by pulsed field gel electrophoresis. Because DNA damage is produced mainly via singlet oxygen diffusing less than 0.1 microns from the sensitizer, DNA double-strand breaks were supposedly produced within this distance of the nuclear membrane. Consistent with this, with prolonged illumination and with increasing concentrations of sensitizer the distribution of DNA fragment lengths reached a plateau level. In contrast, with the hydrophilic, intranuclear sensitizer meso-tetra(4-sulphonatophenyl)porphyrin, no such plateau level was found. The plateau distributions of DNA fragment lengths of different cell types had the same general shape with average fragment lengths ranging from 174 to 194 kilobasepairs. Particular genes, c-myc, fos and p53, were found on broad distributions of photocleaved fragment lengths. The results indicate that on each side of the genes the locus of the chromatin fibre situated close to the nuclear membrane, varied randomly.     

Scalable Water‐Based Production of Highly Conductive 2D Nanosheets with Ultrahigh Volumetric Capacitance and Rate Capability

Highly conductive and ultrathin 2D nanosheets are of importance for the development of portable electronics and electric vehicles. However, scalable production and rational design for highly electronic and ionic conductive 2D nanosheets still remain a challenge. Herein, an industrially adoptable fluid dynamic exfoliation process is reported to produce large quantities of ionic liquid (IL)‐functionalized metallic phase MoS₂ (m‐MoS₂) and defect‐free graphene (Gr) sheets. Hybrid 2D–2D layered films are also fabricated by incorporating Gr sheets into compact m‐MoS₂ films. The incorporated IL functionalities and Gr sheets prevent aggregation and restacking of the m‐MoS₂ sheets, thereby creating efficient and rapid ion and electron pathways in the hybrid films. The hybrid film with a high packing density of 2.02 g cm^?3 has an outstanding volumetric capacitance of 1430.5 F cm^?3 at 1 A g^?1 and an extremely high rate capability of 80% retention at 1000 A g^?1. The flexible supercapacitor assembled using a polymer‐gel electrolyte exhibits excellent resilience to harsh electrochemical and mechanical conditions while maintaining an impressive rate performance and long cycle life. Successful achievement of an ultrahigh volumetric energy density (1.14 W h cm^?3) using an organic electrolyte with a wide cell voltage of ≈3.5 V is demonstrated.     

Photoelectrochemical measurements of a heterosupramolecular system under visible light irradiation.

A photochemical system utilising a modular approach characterised through interpretation of photoelectrochemical measurements is discussed. A photoanode was prepared by the chemisorption of a photosensitiser, cis-bis-(2,2'-bipyridine)-(4,4'-bis-(methyl)phosphonato-2,2'-bipyridine)ruthenium(II) dichloride (RuL2L'2+), to a mixed nanoporous nanocrystalline RuO2:TiO2 thin film, calcined on a fluorine doped SnO2 conducting glass substrate. Similarly, an electron relay molecule, 1-ethyl-1'-(2-phosphonoethyl)-4,4'-bipyridinium dichloride (EVP), was covalently bound to a platinum electroplated nanoporous nanocrystalline TiO2 thin film, and the electrodes connected in a photoelectrocatalytic cell (PCC). Irradiation with lamda > 420 nm gave a measurable photocurrent. Interpretation of the photocurrents obtained from this assembly provides a means for understanding photochemical reactions under low light intensities. Optimised conditions of the electrolyte solution were determined to be pH = 5 and illumination yielded eta = 0.0036% with an apparent quantum yield (AQY)= 1.6%.     

Molecular modeling of 4-methylphthalonitrile for dye sensitized solar cells using quantum chemical calculations

The geometries, electronic structures, polarizabilities, and hyperpolarizabilities of organic dye sensitizer 4-Methylphthalonitrile was studied based on Hartree-Fock (HF) and density functional theory (DFT) using the hybrid functional B3LYP. Ultraviolet-visible (UV-Vis) spectrum was investigated by time dependent-density functional theory (TD-DFT). Features of the electronic absorption spectrum in the visible and near-UV regions were assigned based on TD-DFT calculations. The absorption bands are assigned to π → π* transitions. Calculated results suggest that three lowest energy excited states of 4-Methylphthalonitrile are due to photo induced electron transfer processes. The interfacial electron transfer between semiconductor TiO₂ electrode and dye sensitizer 4-Methylphthalonitrile is due to an electron injection process from excited dye to the semiconductor’s conduction band. The role of cyanine and methyl group in 4-Methylphthalonitrile in geometries, electronic structures, and spectral properties were analyzed.     

2,3′-Diamino-4,4′-stilbenedicarboxylic acid sensitizer for dye-sensitized solar cells: quantum chemical investigations

The metal-free organic dye sensitizer 2,3′-diamino-4,4′-stilbenedicarboxylic acid has been investigated for the first time for dye-sensitized solar cell applications. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations (performed using the hybrid functional B3LYP) were carried out to analyze the geometry, electronic structure, polarizability, and hyperpolarizability of 2,3′-diamino-4,4′-stilbenedicarboxylic acid used as a dye sensitizer. A TiO₂ cluster was used as a model semiconductor when attempting to determine the conversion efficiency of the selected dye sensitizer. Our TD-DFT calculations demonstrated that the twenty lowest-energy excited states of 2,3′-diamino-4,4′-stilbenedicarboxylic acid are due to photoinduced electron-transfer processes. Moreover, interfacial electron transfer between a TiO₂ semiconductor electrode and the dye sensitizer occurs through electron injection from the excited dye to the semiconductor’s conduction band. Results reveal that metal-free 2,3′-diamino-4,4′-stilbenedicarboxylic acid is a simple and efficient sensitizer for dye-sensitized solar cell applications.     

在光动力疗法中应用的量子点

概述了现存的主要量子点的构成及其特点,阐述了量子点的性质主要由量子点的成分、结构、包覆和尺寸所决定。并重点讨论量子点在光动力疗法中,量子点直接代替传统光敏剂、量子点的荧光共振能量转移、量子点作为宽禁带半导体材料TiO2的敏化剂等三种不同应用中,对量子点的要求,通过讨论指出由于其特性,量子点将在光动力疗法中得到更广泛的应用,也对在光动力疗法中应用的量子点的毒性及其他可能产生的问题提出了展望。     

Parameters affecting the chemical work output of a hybrid photoelectrochemical biofuel cell.

A hybrid photoelectrochemical biofuel cell employing the photoanode architecture of a dye-sensitized solar cell has been assembled. A porphyrin dye sensitizes a TiO(2) semiconductor over the visible range to beyond 650 nm. Photoinduced charge separation at the dye-TiO(2) interface results in electron migration to a cathode, and the holes generated on surface bound dyes oxidize soluble electron mediators. The increased [Ox] : [Red] ratio of the mediator drives the solution-based enzymatic oxidation of appropriate substrates. In this report we investigate how the accumulation of anodic and cathodic products limits cell performance. The NAD(+)/NADH and benzoquinone/hydroquinone redox couples were studied as sacrificial electron donors in the absence of appropriate enzymes or substrates. Comparatively poor cell performance was observed using the benzoquinone/hydroquinone couple. This effect is explained in terms of rapid charge recombination by electron donation from the electrode to benzoquinone in solution, as compared to much less recombination with NAD(+). With the NAD(+)/NADH couple the cell performance is relatively independent of the redox poise of the anode solution, but limited by accumulation of reduction products in the cathodic compartment. Using the NAD(+)/NADH couple, the photochemical reforming of ethanol to hydrogen was demonstrated under conditions where the process would be endergonic in the dark.     

Bio-photovoltaic conversion device using chlorine-e6 derived from chlorophyll from Spirulina adsorbed on a nanocrystalline TiO2 film electrode

A bio-photovoltaic conversion device based on dye-sensitised solar cell (DSSC) using the visible light sensitisation of chlorine-e6 (Chl-e6) derived from chlorophyll from Spirulina adsorbed on a nanocrystalline TiO2 film was developed. Form fluorescence spectrum of Chl-e6 adsorbed on a nanocrystalline TiO2 film, the emission of Chl-e6 was effectively quenched by TiO2 nanocrystalline indicating that the effective electron injection from the excited singlet state of Chl-e6 into the conduction band of TiO2 particles occurred. The short-circuit photocurrent density (Isc). the open-circuit photovoltage (Voc). and the fill factor (FF) of solar cell using Chl-e6 adsorbed on a nanocrystalline TiO2 film electrode were estimated to be 0.305 +/- 0.012 mA cm(-2), 426 +/- 10 mV, and 45.0%, respectively. IPCE values were reached a maximum around the wavelength of absorption maximum (7.40% at 400 nm; 1.44% at 514 nm and 2.91% at 670 nm), indicating that the DSSC using visible light sensitisation of nanocrystalline TiO2 film by Chl-e6 was developed.     

Modification of chitosan-methylcellulose composite films with meso-tetrakis(4-sulfonatophenyl)porphyrin

Polysaccharide films containing chitosan, methylcellulose, and a mixture of these polysaccharides in various ratios were prepared and modified with meso-tetrakis(4-sulfonatophenyl)porphyrin in an aqueous medium at pH 7. The modified films were compared with the initial films using spectroscopic methods and microscopic imaging. Electronic (UV-vis absorption, electronic circular dichroism (ECD)) and vibrational (FTIR and Raman) spectra showed that the porphyrin macrocycles had a strong affinity toward chitosan and did not interact with the methylcellulose. The total porphyrin uptake depended on the chitosan: methylcellulose ratio and pure methylcellulose films did not retain porphyrin macrocycles. ECD measurements detected the presence of optically active porphyrin species bound to the films. SEM and AFM images confirmed that the porphyrin macrocycles caused structural changes on the film surface and within the film layer.     

Nanowire‐Based Three‐Dimensional Transparent Conducting Oxide Electrodes for Extremely Fast Charge Collection

A 3D transparent conducting oxide (3D‐TCO) has been fabricated by growing Sn‐doped indium oxide (ITO) nanowire arrays on glass substrates via a vapor transport method. The 3D TCO charge‐collection properties have been compared to those of conventional two‐dimensional TCO (2D‐TCO) thin films. For use as a photoelectrode in dye‐sensitized solar cells, ITO‐TiO₂ core‐shell nanowire arrays were prepared by depositing a 45 nm‐thick mesoporous TiO₂ shell layer consisting of ～6 nm anatase nanoparticles using TiCl₄ treatments. Dye‐sensitized solar cells fabricated using these ITO‐TiO₂ core‐shell nanowire arrays show extremely fast charge collection owing to the shorter electron paths across the 45 nm‐thick TiO₂ shell compared to the 2D TCO. Interestingly, the charge‐collection time does not increase with the overall electrode thickness, which is counterintuitive to conventional diffusion models. This result implies that, in principle, maximum light harvesting can be achieved without hindering the charge collection. The proposed new 3D TCO should also be attractive for other photovoltaic applications where the active layer thickness is limited by poor charge collection.     

Highly efficient polypyridyl-ruthenium(II) photosensitizers with chelating oxygen donor ligands: β-diketonato-bis(dicarboxybipyridine)ruthenium

A series of mono-cationic polypyridyl-ruthenium complexes with strongly electron donating β-diketonate ligands {(dcbp)₂Ru(L)}Cl, where DCBP=4,4′-dicarboxy-2,2′-bipyridine; L=acetylacetonate (1), 3-methyl-2,4-pentanedionate (2), 1,3-diphenyl-1,3-propanedionate (3), have been synthesized as molecular photosensitizers for a nanocrystalline TiO₂ electrode. In alkaline methanol solution, these complexes exhibit intense visible light absorption with low energy MLCT maxima above 517 nm which accompany a significantly enhanced band tail, improving red light absorptivity beyond 600 nm. The photoelectrochemical properties of these three diketonate complexes on a TiO₂ semiconductor have been compared to cis-dithiocyanate complex, (dcbp)₂Ru(NCS)₂, which is one of the most efficient sensitizers reported to date. The diketonate complexes show quite high performances in photoelectrochemical cells containing I⁻/I₃ ⁻ electrolyte. The overall solar light-to-electrical energy conversion efficiencies are in the range of 6.0–3.9% while the dithiocyanate complex yields 5.7% efficiency in our experiments.     

Zinc tetraruthenated porphyrin binding and photoinduced oxidation of calf-thymus DNA

The photooxidation of calf-thymus DNA has been investigated in the presence of a supramolecular tetraruthenated zincporphyrin (ZnTRP) sensitizer. A strong interaction of ZnTRP with DNA has been observed, exhibiting a gradual transition from a non-specific electrostatic binding mode to a more specific one at high DNA concentrations. Formation of O2(1delta(g)) has been detected from its near-infrared emission, after the excitation of ZnTRP in dioxygen-containing solutions. In the presence of DNA and dioxygen, ZnTRP promotes efficient photocatalytic oxidation of the 2'-deoxyguanosine sites, via their direct reaction with O2(1delta(g)), as in a previous work on the ZnTRP-photoinduced oxidation of the free nucleosides.