Altered temperature induction sensitivity of the lambda pR/cI857 system for controlled gene E expression in Escherichia coli

Cell lysis of Gram-negative bacteria can be efficiently achieved by expression of the cloned lysis gene E of bacteriophage PhiX174. Gene E expression is tightly controlled by the rightward lambda pR promoter and the temperature-sensitive repressor cI857 on lysis plasmid pAW12. The resulting empty bacterial cell envelopes, called bacterial ghosts, are currently under investigation as candidate vaccines. Expression of gene E is stringently repressed at temperatures up to 30 degrees C, whereas gene E expression, and thus cell lysis, is induced at temperatures higher than 30 degrees C due to thermal inactivation of the cI857 repressor. As a consequence, the production of ghosts requires that bacteria have to be grown at 28 degrees C before the lysis process is induced. In order to reflect the growth temperature of pathogenic bacteria in vivo, it seemed favorable to extend the heat stability of the lambda pR promoter/cI857 repressor system, allowing pathogens to grow at 37 degrees C before induction of lysis. In this study we describe a mutation in the lambda pR promoter, which allows stringent repression of gene E expression at temperatures up to 36 degrees C, but still permits induction of cell lysis at 42 degrees C.     

A set of UV-inducible autolytic vectors for high throughput screening

A high throughput screening scheme is often a prerequisite for directed evolution of enzymes or metagenomic analysis of DNA samples. For assaying intracellular enzymes of interest (e.g. when Escherichia coli is used), it requires cell lysis in many cases, chemical or enzymatic, which can be tedious and cost-consuming. In this study, a set of UV-inducible autolytic vectors was constructed to offer a simpler means of cell lysis that is free of additional liquid handling. The SRRz lysis gene cassette from bacteriophage Lambda was cloned downstream of a UV-inducible promoter, the recA promoter or the umuDC promoter, and further inserted into the backbone of pUC18, and transformed into E. coli BL21 cells. The SRRz expression and cell lysis was induced by UV irradiation. For both the recA and umuDC promoters, at 30 degrees C the lysis efficiency was found to be consistent and above 60% as measured using beta-galactosidase as the reporter. However, at 37 degrees C the lysis profiles were found to be erratic. UV lysis in 96-well plates also produced consistent lysis results that were comparable to those obtained by lysozyme treatment, demonstrating the utility of these autolytic vectors in high throughput screening. This set of artificial SRRz autolysis units should be transferable to other vectors. Surprisingly, it was found that the E. coli BL21(DE3) was also partially disrupted under UV irradiation, with a lysis efficiency of 44.5% at 30 degrees C, and 22.5% at 37 degrees C.     

A 'phase-shift' fusion system for the regulation of foreign gene expression by lambda repressor in gram-negative bacteria

A 'phase-shift' translation fusion vector was constructed in which mutually compatible restriction sites BamHI, BclI and BglII are positioned in such a manner that the cut point is in a different reading frame, immediately following the ATG start codon and ribosome-binding site of the lambda cro gene. The lambda cro gene is expressed from promoter pR and controlled by a thermosensitive (cI857) lambda repressor. The usefulness of the expression vector was demonstrated using a galK gene lacking the ATG start codon and fusing this to the pR promoter and ATG start codon of the lambda cro gene, resulting in cI857-regulated expression of galactokinase. The vector is of general use for foreign gene expression in Escherichia coli when the target gene has a compatible cohesive end (5'-GATC-3') at the N terminus (provided, for example, by a BamHI linker). The lambda cI857-pR-cro-galK cassette was cloned into pJRD215, a wide-host-range plasmid and transferred by conjugation to a variety of Gram-negative bacteria. In all cases, thermosensitive regulation of galactokinase could be demonstrated, though the levels of induction varied considerably. These results show that the powerful lambda pR promoter and the efficient lambda repressor can be used to regulate expression of foreign genes in Gram-negative organisms other than E. coli.     

A plasmid vector with temperature-controlled gene expression

A 169 b.p. fragment including the bla gene promoter p3 has been removed from pBR327 plasmid, and the deleted plasmid used for cloning the TaqI/BglII-fragment of the lambda c1857ind- DNA containing promoter pR and gene cI to obtain plasmid pCE119. Cells containing pCE119 produced a high level of beta-lactamase at 42 degrees C, the yield at 42 degrees C being 100 times higher than at 32 degrees C. For cloning and functional assays a pCEZ12 plasmid was constructed, in which promoter pR and repressor cI of lambda phage control the expression of the semi-synthetic beta-galactosidase gene. Yield of beta-galactosidase produced by pCEZ12 at 42 degrees C was ca. 300 times higher than at 32 degrees C.     

Cloning of xylanase gene of Streptomyces flavogriseus in Escherichia coli and bacteriophage lambda-induced lysis for the release of cloned enzyme.

The xylanase gene of Streptomyces flavogriseus was cloned in pUC8 plasmid and expressed in Escherichia coli lysogenic for lambda cI857. lambda-Induced lysis of E. coli at 42 degrees C allowed efficient release of cloned enzyme activity in extracellular environment. The xylanase gene was located in the 0.8-kb HindIII fragment and coded for 18,000 Mr xylanase.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

Low-copy-number plasmid-cloning vectors amplifiable by derepression of an inserted foreign promoter

By insertion of a DNA fragment, containing the phage lambda pR promoter and the pM-promoted cI857 allele of the lambda repressor gene, in plasmid R1 upstream of the replication control genes, cloning vectors have been constructed which are present in one copy per chromosome at temperatures below 37 degrees C, and which display uncontrolled replication at 42 degrees C. Derivatives have been made which carry the R1 par region, stabilizing the plasmid at low temperature when grown in the absence of selection pressure. Cells harbouring these plasmids stop growing after 1-2 h incubation at 42 degrees C, and at this time 50% of the total DNA in the cells is plasmid DNA corresponding to more than 1000 plasmid molecules per cell. Concomitant with plasmid amplification at the high temperature, synthesis of plasmid-coded gene products is amplified, and these vectors can therefore be utilized for obtaining greatly enhanced yields of gene products that may be detrimental to the host cell when present in large amounts.     

Cloning and expression in Escherichia coli of three fragments of diphtheria toxin truncated within fragment B.

We have constructed three different truncated versions of diphtheria toxin (a 535-amino-acid polypeptide) which correspond to the N-terminal 290, 377, and 485 amino acids of the toxin. These lengths include one, three, and all four of the putative membrane-spanning sequences of the toxin which are thought to play a role in the translocation of fragment A into cells. Each of these three genes has been modified at its 3' end to code for a C-terminal cysteine (to allow for disulfide linkage of a targeting ligand) or a gene fusion with alpha-melanocyte-stimulating hormone. We have also substituted the native diphtheria tox promoter (ptox) with the lambda pR promoter in an effort to overexpress these proteins. The truncated genes are expressed in Escherichia coli from both the tox promoter in a constitutive fashion and from the pR promoter by using the heat-inducible cI857 repressor. The clones produce proteins which react with anti-diphtheria toxin serum, which migrate at the anticipated Mr on Western blots, and which have ADP-ribosyltransferase activity. Constitutive synthesis from ptox leads to severe proteolytic degradation even in a protease-deficient strain. High-level expression from the pR promoter in the same lon htpR strain allows the full-length polypeptides to accumulate but also stops the growth of the cells. It appears that removal of as few as 50 amino acids from the C-terminus of diphtheria toxin alters its conformation, making it a target for proteases and causing overexpression lethality in the host cells.     

Identification in vivo of promoter activity in the left site of the att region of bacteriophage lambda DNA

The promoter-probing vector (pSK plasmid) was explored for cloning of the fragments from lambda cI857 and lambda b2 DNAs containing different regions of the att site. We have constructed all-tet fusions where the fusions are: 1) HindIII/BamHI-491 base pairs (b. p.) fragment of lambda cI857 DNA containing POP' site (plasmid pSK-PP'); 2) AluI-242 b. p. fragment of lambda cI857 DNA containing the left arm of the POP' site (plasmid pSK-P); 3) AluI-242 b. p. fragment of lambda cI857 DNA with opposite orientation (plasmid pSK-P); 4) EcoRI/BamHI-750 b. p. fragment of lambda b2 DNA containing the right arm of the POP' site (plasmid pSK-P'). These fusions permit us to analyse the effect of various pieces of the attachment site on the expression tet gene as the result of reparation of this gene promoter. We find that expression of tet (tetracycline resistant phenotype) takes place in the pSK-PP' and pSK-P but not in the pSK-P' and pSK-P. These facts permit us to conclude that the left arm of the att site contains a rightward promoter functioning in vivo. We postulate that this promoter activity might correspond to the promoter patt, which was described in previous experiments in vitro.     

Construction of a thermo-sensitive pRI857 vector for efficient DNA capturing in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Objectives

To establish a positive cloning system with a zero background for high-throughput DNA cloning purpose.

Results

The cloning vector, pRI857, and the genomic-library construction vector, pRI857-BAC, were constructed based on the mechanism of expression of the thermo-sensitive cI857 repressor gene that can stringently repress the P_R promoter and kanamycin resistance gene (P_R-kan ^R ) at 30 °C, but have no effect on P_R-kan ^R gene at 37 °C or at higher temperatures. When the pRI857 vectors were transformed into E. coli with or without a target foreign DNA fragment inserted at the BfrBI site of the cI857 gene, only colonies with the foreign DNA fragment survive. We extended this method to construct a pRI857-BAC vector for genomic library cloning which displays an efficiency of ~10⁷ cfu per µg of genomic DNA, with no empty vectors detected.

Conclusions

Cloning by indirect activation of resistance marker gene represents a novel DNA-capturing system, which can be widely applied for high-throughput DNA cloning.

     

Fine regulation of cI857-controlled gene expression in continuous culture of recombinant Escherichia coli by temperature.

The expression at different temperatures of the lacZ gene, which is controlled by the lambda pL and pR tandem promoters and the cI857 temperature-sensitive repressor, was studied in Escherichia coli continuous cultures. At temperatures between 30 and 42 degrees C, beta-galactosidase activity behaved according to an exponential equation. By inducing a culture at a temperature within this range, predefined, nearly constant submaximal levels of gene expression and recombinant product yield can be obtained.     

Xylanase from the extremely thermophilic bacterium "Caldocellum saccharolyticum": overexpression of the gene in Escherichia coli and characterization of the gene product

A xylanase encoded by the xynA gene of the extreme thermophile "Caldocellum saccharolyticum" was overexpressed in Escherichia coli by cloning the gene downstream from the temperature-inducible lambda pR and pL promoters of the expression vector pJLA602. Induction of up to 55 times was obtained by growing the cells at 42 degrees C, and the xylanase made up to 20% of the whole-cell protein content. The enzyme was located in the cytoplasmic fraction in E. coli. The temperature and pH optima were determined to be 70 degrees C and pH 5.5 to 6, respectively. The xylanase was stable for at least 72 h if incubated at 60 degrees C, with half-lives of 8 to 9 h at 70 degrees C and 2 to 3 min at 80 degrees C. The enzyme had high activity on xylan and ortho-nitrophenyl beta-D-xylopyranoside and some activity on carboxymethyl cellulose and para-nitrophenyl beta-D-cellobioside. The gene was probably expressed from its own promoter in E. coli. Translation of the xylanase overproduced in E. coli seemed to initiate at a GTG codon and not at an ATG codon as previously determined.     

New cloning vectors for integration in the lambda attachment site attB of the Escherichia coli chromosome.

A set of plasmid cloning vectors has been constructed, allowing the integration of any DNA fragment into the bacteriophage lambda attachment site attB of the Escherichia coli chromosome. The system is based upon two components: (i) a number of cloning vectors containing the lambda attachment site attP and (ii) a helper plasmid, bearing the lambda int gene, transcribed from the lambda PR promoter under the control of the temperature-sensitive repressor cI857. The DNA fragment of interest is cloned into the multicloning site of one of the attP-harboring plasmids. Subsequently, the origin of the plasmid, located on a cloning cassette, is cut out and the DNA becomes newly ligated, resulting in a circular DNA molecule without replication ability. The strain of choice, containing the int gene carrying helper plasmid, is transformed with this DNA molecule and incubated at 42 degrees C to induce int gene expression. Additionally, the temperature shift leads to the loss of the helper plasmid after a few cell generations, because the replication ability of its replicon is blocked at 42 degrees C. These vectors have been successfully used for integration of several promoter-lacZ fusions into the chromosome. The ratio between integration due to homologous recombination and Int protein-mediated integration has been determined.     

Construction of heat-inducible expression vector of Corynebacterium glutamicum and C. ammoniagenes: fusion of lambda operator with promoters isolated from C. ammoniagenes

The heat-inducible expression vectors for Corynebacterium glutamicum and C. ammoniagenes were constructed by using the lambdaOL1 and the cryptic promoters, CJ1 and CJ4 that express genes constitutively in C. ammoniagenes.. Although the promoters were isolated from C. ammoniagenes, CJ1 and CJ4 were also active in C. glutamicum. To construct vectors, the OL1 from the lambdaPL promoter was isolated and fused to the CJ1 and CJ4 promoters by recombinant PCR. The resulting artificial promoters, CJ1O and CJ4O, which have one lambdaOL1, and CJ1OX2, which has two successive lambdaOL1, were fused to the green fluorescent protein (GFP) gene followed by subcloning into pCES208. The expression of GFP in the corynebacteria harboring the vectors was regulated successfully by the temperature sensitive cI857 repressor. Among them, C. ammoniagenes harboring plasmid pCJ1OX2G containing GFP fused to CJ1OX2 showed more GFP than the other ones and the expression was tightly regulated by the repressor. To construct the generally applicable expression vector using the plasmid pCJ1OX2G, the His-tag, enterokinase (EK) moiety, and the MCS were inserted in front of the GFP gene. Using the vector, the expression of pyrR from C. glutamicum was tried by temperature shift-up. The results indicated that the constructed vectors (pCeHEMG) can be successfully used in the expression and regulation of foreign genes in corynebacteria.