Lipase-catalyzed enantioselective hydrolysis of methyl 2-fluoro-2-arylpropionates in water-saturated isooctane

Lipases from Candida rugosa, Candida antartica B and Carica papaya are employed as the biocatalyst for the hydrolytic resolution of methyl 2-fluoro-2-arylpropionates in water-saturated isooctane, in which excellent to good enantioselectivity without the formation of byproducts is obtained for the papaya lipase when using (R,S)-2-fluoronaproxen methyl ester (1) and methyl (R,S)-2-fluoro-2-(4-methoxyphenyl)propionate (2), but not methyl (R,S)-2-fluoro-2-(naphth-1-yl)propionate (3) as the substrates. The thermodynamic analysis indicates that the enantiomer discrimination for the papaya lipase is driven by the difference in activation enthalpy for compound 1, 2 or (R,S)-naproxen methyl ester (4). The kinetic analysis also demonstrates that in comparison with (S)-4, the insertion of the 2-fluorine moiety in (R)-1 has increased k₂, but not K_m, and consequently the lipase activity.     

Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester by Carica papaya lipase in water-saturated organic solvents

For the first time, the Carica papaya lipase (CPL) stored in crude papain is explored as a potential enantioselective biocatalyst for obtaining chiral acids from their racemic thioesters. Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester in water-saturated organic solvents is employed as a model system for studying the effects of temperature and solvents on lipase activity and enantioselectivity. An optimal temperature of 60 degrees C, based on the initial rate of (S)-thioester and a high enantiomeric ratio (i.e., E-value defined as the ratio of initial rates for both substrates) of >100 at 45 degrees C in isooctane, is obtained. Kinetic analysis, considering product inhibition and enzyme deactivation, is also performed, showing agreement between the experimental and best-fit conversions for (S)-thioester. A comparison of the kinetic and thermodynamic behaviors of CPL and Candida rugosa lipase (CRL) in isooctane and cyclohexane indicates that both lipases are very similar in terms of thermodynamic parameters DeltaDeltaH and DeltaDeltaS, initial rate of (S)-substrate, and E-value when (R,S)-naproxen 2,2,2-trifluoroethyl thioester or ester is employed as substrate.     

Synthesis of designer lipids using papaya (Carica papaya) latex lipase

Ethyl esters (EE) of C₂ to C₁₄ saturated acids were interesterified with tripalmitin using papaya (Carica papaya) lipase to produce structured triacylglycerols (TG) with palmitoyl moieties in the secondary (sn-2), and short-chain or medium-chain acyl moieties in the primary (sn-1,3) positions. It was found that the incorporation of the acyl moieties rose with time and chain length of the ethyl ester. Little reaction occurred with ethyl acetate. The positional analysis of the structured TG formed revealed an increase in preference of the lipase for the primary positions as compared to the secondary position with increasing chain length of the acyl donor from C₂ to C₁₄.     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Partially purified Carica papaya lipase: a versatile biocatalyst for the hydrolytic resolution of (R,S)-2-arylpropionic thioesters in water-saturated organic solvents

With the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioesters in water-saturated isooctane as a model system, improvements of the specific lipase activity and thermal stability were found when a crude Carica papaya lipase (CPL) was partially purified and employed as the biocatalyst. The partially purified Carica papaya lipase (PCPL) was furthermore explored as an effective enantioselective biocatalyst for the hydrolytic resolution of (R,S)-profen thioesters in water-saturated organic solvents. The kinetic analysis in water-saturated isooctane indicated that both acyl donor and acyl acceptor have profound influences on the lipase activity, E-value, and enantioselectivity. Inversion of the enantioselectivity from (S)- to (R)-thioester was found for (R,S)-fenoprofen and (R,S)-ketoprofen thioesters that contained a bulky substituent at the meta-position of 2-phenyl moiety of the acyl part. Kinetic constants for the acylation step were furthermore estimated for elucidating the kinetic data and postulating an active site model. The thermodynamic analysis indicated that the enantiomer discrimination was driven by the difference of activation enthalpy (DeltaDeltaH) and that of activation entropy (DeltaDeltaS), yet the latter was dominated for most of the reacting systems. The postulated active site model was supported from the variation of DeltaDeltaH and DeltaDeltaS with the acyl moiety, in which a good linear enthalpy-entropy compensation relationship was also illustrated. A comparison of the performances between Candida rugosa lipase (CRL) and PCPL indicated that PCPL was superior to CRL in terms of the better thermal stability, similar or better lipase activity for the fast-reacting substrate, time-course-stability, and lower enzyme cost.     

Kinetic and modelling studies on the lipase catalysed enantioselective esterification of (±)-perillyl alcohol

Several lipases were kinetically studied with the aim to exploit their enantioselectivity in the esterification of (S)-(−) and (R)-(+)-perillyl alcohol with decanoic acid. Most of the lipases studied exhibited stereopreference towards the R-enantiomer with apparent E-values from 3.8 to 0.6, calculated as the initial esterification rates ratio for the individual enantiomers. In an attempt to interpret the structural basis of enantioselectivity, modelling studies were performed with two of these lipases, Candida cylindracea lipase (CcL) and Pseudomonas cepacia lipase (PcL) based on their previously determined X-ray crystal structures. The results derived from modelling studies confirm their stereopreferences towards the R-enantiomer, since increased conformational energy of the S-ester was found compared to the R-ester.     

Lipase-catalyzed optical resolution of trifluoro(aryl)ethanols

Optical resolutions of racemic 2,2,2-trifluoro-1-(aryl)ethanols — (1-naphthyl), (2-naphthyl), (4-methylnaphthyl), (phenyl), (1-pyrenyl) — were achieved by lipase-catalyzed enantioselective acetylations with vinyl acetate as an acetyl donor in octane, and (S)-acetates and (R)-alcohols were obtained. Among the lipases tested, lipase from Pseudomonas aeruginosa (lipase LIP, Toyobo) showed good enantioselectivity for above ethanols. However, no acetylation occurred with sterically hindered alcohols — (9-phenanthryl), (9-anthryl), (2-methylnaphthyl), (2, 4, 6-trimethylphenyl) — by various lipases. The resolutions of the three alcohols were carried out by the enantioselective alcoholysis or hydrolysis of their chloroacetates by lipase LIP.     

Biocatalyst engineering exerts a dramatic effect on selectivity of hydrolysis catalyzed by immobilized lipases in aqueous medium

It has been found that enantioselectivity of lipases is strongly modified when their immobilization is performed by involving different areas of the enzyme surface, by promoting a different degree of multipoint covalent immobilization or by creating different environments surrounding different enzyme areas. Moreover, selectivity of some immobilized enzyme molecules was much more modulated by the experimental conditions than other derivatives. Thus, some immobilized derivatives of Candida rugosa (CRL) and C. antarctica-B (CABL) lipases are hardly enantioselective in the hydrolysis of chiral esters of (R,S)-mandelic acid under standard conditions (pH 7.0 and 25°C) (E<2). However, other derivatives of the same enzymes exhibited a very good enantioselectivity under nonstandard conditions. For example, CRL adsorbed on PEI-coated supports showed a very high enantio-preference towards S-isomer (E=200) at pH 5. On the other hand, CABL adsorbed on octyl-agarose showed an interesting enantio-preference towards the R-isomer (E=25) at pH 5 and 4°C. These biotransformations are catalyzed by isolated lipase molecules acting on fully soluble substrates and in the absence of interfacial activation against external hydrophobic interfaces. Under these conditions, lipase catalysis may be associated to important conformational changes that can be strongly modulated via biocatalyst and biotransformation engineering. In this way, selective biotransformations catalyzed by immobilized lipases in macro-aqueous systems can be easily modulated by designing different immobilized derivatives and reaction conditions.     

Microfluidic separation of (S)-ibuprofen using enzymatic reaction

This study was investigated for the enantioselective separation of (S)-ibuprofen using the ionic liquid in the microfluidic device. A stable and thin ionic liquid flow (ILF) was made by controlling the flow rate of the ILF in the microfluidic channel. In addition, coupling lipase as a biocatalyst with the ILF based on the microfluidic device showed the facilitative and selective transport of (S)-ibuprofen across the ILF, indicating successful optical resolution of a racemic mixture. Subsequently, the enantioselectivity was evaluated in the transport ratio (η) of (R)- and (S)-ibuprofen, the optical resolution ratio () and enantiomeric excess of (S)-ibuprofen (ee_S).     

Immobilized cells biocatalyst for the production of S-acetylthio-2-methyl propionic acid

S-acetylthio-2-methylpropionic acid (S-AMPA) is an important chiral intermediary for numerous hypertension drugs such as captopril. S-AMPA can be produced by hydrolyzing the corresponding racemic methyl MAMP (S,R-methyl-β-acetylthioisobutyrate) by lipases or esterases that have the appropriate stereo specificity. Psudomonas fluorescens IFO 12055 possessing a highly specific lipase was used to process this reaction in the form of immobilized cells. Reaction kinetic and immobilization methods were also studied. Strong product inhibition was observed, that is, at 3% S-AMPA (namely 183 mM), activity was reduced by 50%. Spontaneous hydrolysis of the ester and thioester bonds was also observed, and was independent of the cells. Thus, reaction selectivity and yield must be optimized through adjusting the substrate concentration and total biocatalyst activity. Conventional calcium alginate (3% w/w) encapsulation was modified by adding 3% w/w polyethyleneimine (PEI) and cross-linked by a biologically derived agent, genipin (5.6 mM). This method was found to be satisfactory to produce stable and functioning biocatalyst and can maintain high reactivity for repeated 25 batches with e.e. values above 90%.     

Candida antarctica lipase B catalysed amidation of pyroglutamic acid derivatives. A reaction survey

Pyroglutamic acid esters, both (S)- and (R)-enantiomers, have been studied as substrates of the Candida antarctica lipase B catalyzed amidation in anhydrous organic solvents. They behaved as very good substrates when primary amines or ammonia were used as nucleophiles, affording the corresponding secondary and primary amides, respectively, but did not react with secondary amines. The reaction was enantioselective for the (R)-enantiomer of chiral amines although little kinetic difference was observed between (S)- and (R)-pyroglutamates as acyl donors. As an example of an infrequent reaction, free (S)-pyroglutamic acid may also act as a substrate of the reaction, but is much less reactive than its esters.     

Lipase-catalyzed production of optically active (S)-flurbiprofen in aqueous phase reaction system containing chiral succinyl β-cyclodextrin

The lipase-catalyzed production of optically active (S)-flurbiprofen was carried out in a dispersion reaction-system induced by chiral succinyl β-cyclodextrin (suβ-CD). The optimal reaction conditions were 500 mM (R,S)-flurbiprofen ethyl ester ((R,S)-FEE), 600 units of Candida rugosa lipase per 1 mmol of (R,S)-FEE, and 1000 mM suβ-CD at 37 °C for 72 h. An extremely high enantiomeric excess of 0.98 and conversion yield of 0.48 were achieved in the dispersed aqueous phase reaction system containing chiral suβ-CD added as a dispenser and chiral selector. The inclusion complex formability of the immiscible substrate (S)- and (R)-form of FEE with suβ-CD was compared using a phase-solubility diagram, DSC, and ¹H NMR. (S)-Isomer formed a more stable and selective inclusion complex with chiral suβ-CD. It was hydrolyzed much more selectively by lipase from C. rugosa, due to the selective structural modification through inclusion complexation with chiral suβ-CD.     

Modulation of Mucor miehei lipase properties via directed immobilization on different hetero-functional epoxy resins: Hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid

Purified lipase from Mucor miehei (MML) has been covalently immobilized on different epoxy resins (standard hydrophobic epoxy resins, epoxy-ethylenediamine, epoxy-iminodiacetic acid, epoxy-copper chelates) and adsorbed via interfacial activation on octadecyl-Sepabeads support (fully coated with very hydrophobic octadecyl groups). These immobilized enzyme preparations were used under slightly different conditions (temperature ranging from 4 to 25 °C and pH values from 5 to 7) in the hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid.

Different catalytic properties (activity, specificity, enantioselectivity) were found depending on the particular support used. For example, the epoxy-iminodiacetic acid-Sepabeads gave the most active preparation at pH 7 while, at pH 5, the ethylenediamine-Sepabeads was superior.

More interestingly, the enantiomeric ratio (E) also depends strongly on the immobilized preparation and the conditions employed. Thus, the octadecyl-MML preparation was the only immobilized enzyme derivative which exhibited enantioselectivity towards R isomer (with E values ranging from 5 at 4 °C and pH 7 to 1.2 at pH 5 and 25 °C).

The other immobilized preparations, in contrast, were S selective. Immobilization on iminodiacetic acid-Sepabeads afforded the catalyst with the highest enantioselectivity (E=59 under optimum conditions).     

Resolution of 1,3-dioxolane derivatives using the lipase from an Acinetobacter junii SY-01

Acinetobacter junii SY-01 producing a lipase enantioselectively hydrolyzing 1,3-dioxolane derivatives was isolated from water sludge sample and the effect of solvent, acyl donor, vinyl acetate concentration, substrate concentration, operating temperature and immobilization on activity and enantioselectivity was studied for the resolution of 1,3-dioxolane derivatives through transesterification reaction using a lipase from the isolated strain. Best selectivity was obtained at lower substrate concentration (3–5 mM), higher vinyl acetate concentration (500–1000 mM) and lower temperature (30–40 °C) in the reaction mixture. Lipase immobilized onto Accurel MP-1000 (micro-porous polypropylene) gave the best results and the reactivity was about 29-fold higher than the free enzyme without the decrease of enantioselectivity. Resolution of 1,3-dioxolane derivatives was carried out in flask scale containing 100 ml solvents using the lipase immobilized onto Accurel MP-1000. In this reaction, the yield and enantiomeric excess of the remaining (2R, 4S)-alcohol were 31.2% and 98.2%, respectively. This result suggests that it can be used as an alternative method, compared to the present synthetic method, for the production of optically pure (2R, 4S)-itraconazole.     

Biotransformation of 3-substituted methyl (R,S)-4-cyanobutanoates with nitrile- and amide-converting biocatalysts

Whole cells of Rhodococcus equi A4 chemoselectively hydrolyzed methyl (R,S)-3-benzoyloxy-4-cyanobutanoate and methyl (R,S)-3-benzyloxy-4-cyanobutanoate into monomethyl (R,S)-3-benzoyloxyglutarate and monomethyl (R,S)-3-benzyloxyglutarate, respectively. The intermediates of the biotransformations were the corresponding amides which were also obtained using the purified nitrile hydratase from the same microorganism.     

Absolute configurations of pittosporatobiraside A and B from Pittosporum tobira

The absolute configuration at C-12 of pittosporatobiraside A and B isolated from the leaves of Pittosporum tobira was determined to be S on the basis of the exciton chirality of their dibenzoate derivative. The structures of the two glycosides were thus established to be (1S,9S,10S,11S,12S,14R,16R)-12-[(Z)-2-methyl-1-oxo-2-butenyl]-6,14-dimethyl-2-methylene-9-(1-methylethyl)-15,17-dioxatricyclo[8.7.0.0^11,16]heptadec-5-en-13-one and (1S,9S,10S,11S,12S,14R,16R)-12-(3-methyl-1-oxo-2-butenyl)-6,14-dimethyl-2-methylene-9-(1-methylethyl)-15,17-dioxatricyclo [8.7.0.0^11,16]heptadec-5-en-13-one, respectively.     

酵母脂肪酶分子进化及催化合成(S)-1,4-苯并二口恶烷*

Objective: 1,4-Benzodioxane is an important chiral intermediate for antihypertensive (Proroxan and Doxazosin), antidepressant (MCK-242) and other drugs, and it displays a broad spectrum of applications in the pharmaceutical field. Currently, in spite of high-yield advantage of chemical synthesis, there are some problems of environmental pollution and low production safety. Using lipase to catalyze synthesis of 1,4-benzodioxane provides a new pathway of green synthesis of 1,4-benzodioxane. However, natural enzymes face the dilemma of poor enantioselectivity. Therefore, molecular evolution was performed on Candida antarctica lipase B, and a technical route for the catalytic synthesis of 1,4-benzodioxane was established. Methods: Firstly, the key amino acid residues involved in substrate binding and conversion in the active center of Candida antarctica lipase B were analyzed, and saturation mutagenesis libraries on the interaction sites were constructed. Improved mutants with high efficiency and high enantioselectivity were then obtained using HPLC detection. Furthermore, catalytic synthesis conditions of mutant D223N/A225K were systematically optimized. Results: The results indicated that the mutants mainly derived from the pairwise site D223/A225 (such as D223N/A225K and D223G/A225W) were biased towards the synthesis of (S)-isoforms, while most of the mutants derived from the pairwise site E188/I189 (such as E188D/I189M) showed a bias for the synthesis of (R)-isoforms. Compared with WT, the ee_s value of the best mutant D223N/A225K to synthesize (S)-1,4-benzodioxane was increased from 11.9% to 29.3%. After systematic optimization of the reaction conditions, an ee_s value of (93.9±0.16)% and a conversion rate of (47.5±2.33)% were achieved using mutant D223N/A225K to catalyze kinetic resolution of methyl (R,S)-2,3-dihydro-1,4-benzodioxin-2-carboxylate in n-butanol/phosphate buffered saline (20∶80, V/V) biphasic solvent at 37℃ for 50 min. Conclusion: An efficient kinetic resolution of methyl (R,S)-2,3-dihydro-1,4-benzodioxin-2-carboxylate was successfully achieved by molecular evolution and optimization of conditions, which provides a new example for the creation of new enzymes by protein engineering technology, and also provides a theoretical and technical foundation for the efficient synthesis of (S)-1,4-benzodioxane molecules by enzymatic methods.     

Esterified, optical pure (3S, 3′S)-astaxanthin from flowers of Adonis annua

The quantitative carotenoid composition of the red flower petals of Adonis annua is reported. Optically pure (3S, 3′S)-astaxanthin occurs both as a diester (64% of total carotenoid) and as a monoester (11%). The optical purity was determined by hydrolysis of the natural esters in the absence of oxygen and subsequent HPLC analysis of the paren -ketol esterified with (−)-camphanic acid. All non-animal sources hitherto examined synthesize pure 3S,3′S- or 3R,3′R-isomers of astaxanthin, whereas marine animal sources contain mixtures of all three optical isomers, including the meso form.     

Neolignans from Ocotea catharinensis

Bark, wood and leaves of Ocotea catharinensis contain respectively 10 (average yield 0.7%.), 15 (average yield 0.004%.) and one (yield 0.4%.) neolignans of the bicyclo[3.2.1]octanoid and the hydrobenzofuranoid structural types, including the new rel-(7S,8R,1′R,4′S,5′R,6′R)-Δ^8′-4′,6′-dihydroxy-5′-methoxy-3,4-methylenedioxy-3′-oxo-8.1′,7.5′-neolignan, (7S,8S)-Δ^{1′,3′,5′,8′}-5,3′,5′-trimethoxy-3,4-methylenedioxy-8.1′,7.O.6′,4.O.7′-neolignan, (7R,8S,1′R,3′R)-Δ^5′,8′-3,4,3′,5′-tetramethoxy-4′-oxo-8.1′,7.O.6′-neolignan and rel-(7R,8S,1′R,2′S)-Δ^4′,8′-2′-hydroxy-3,4-dimethoxy-3′-oxo-8.1′,7.O.2′-neolignan.     

Catalytic performance of a highly enantioselective (R)-ester hydrolase from a new isolate Acinetobacter sp. CGMCC 0789

A highly enantioselective (R)-ester hydrolase was partially purified from a newly isolated bacterium, Acinetobacter sp. CGMCC 0789, whose resting cells exhibited a highly enantioselective activity toward the acetate of (4R)-hydroxy-3-methyl-2-(2-propynyl)- cyclopent-2-enone (R-HMPC). The optimum pH and temperature of the partially purified enzyme were 8.0 and 60 °C, respectively. The enantioselectivity of the crude enzyme was increased by 1.2-fold from 16 to 20 when the reaction temperature was raised from 30 to 60 °C. The activity of the crude enzyme was enhanced by 4.1-fold and the enantioselectivity (E-value) was markedly enhanced by 4.3-fold from 16 to 68 upon addition of a cationic detergent, benzethonium chloride [(diisobutyl phenoxyethoxyethyl) dimethyl benzylammoniom chloride]. The hydrolysis of 52 mM (R,S)-HMPC acetate to (R)-HMPC was completed within 8 h, with optical purity of 91.4% ee_p and conversion of 49%.