Selective synthesis of triangular cluster oxido-sulfidocomplexes of Mo and W: High yield preparations of [Mo3O2S2(H2O)9], [W3O2S2(H2O)9], [W2MoO2S2(H2O)9] and their derivatization

Reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ or metallic Mo under hydrothermal conditions (140 °C, 4 M HCl) gives oxido-sulfido cluster aqua complex [Mo₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (1). Similarly, [W₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (2) is obtained from [W₂O₂(μ-S)₂(H₂O)₆]²⁺ and W(CO)₆. While reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with W(CO)₆ mainly proceeds as simple reduction to give 1, [W₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ produces new mixed-metal cluster [W₂Mo(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (3) as main product. From solutions of 1 in HCl supramolecular adduct with cucurbit[6]uril (CB[6]) {[Mo₃O₂S₂(H₂O)₆Cl₃]₂CB[6]}Cl₂⋅18H₂O (4) was isolated and structurally characterized. The aqua complexes were converted into acetylacetonates [M₃O₂S₂(acac)₃(py)₃]PF₆ (M₃ = Mo₃, W₃, W₂Mo; 5a-c), which were characterized by X-ray single crystal analysis, electrospray ionization mass spectrometry and ¹H NMR spectroscopy. Crystal structure of (H₅O₂)(Me₄N)₄[W₃(μ₃-S)(μ₂-S)(μ₂-O)₂(NCS)₉] (6), obtained from 2, is also reported.     

Structure of [Ni(dippe)(μ-S)]2 and its reaction products. The nucleophilicity of the Ni2S2 fragment

The dimer [(dippe)Ni(μ-S)]₂ reacts with organic electrophiles to give the alkylated species [(dippe)₂Ni₂(μ-S)(μ-SR)]⁺. Stronger alkylating agents lead to double alkylation and cleavage of the dimer. Protonation similarly occurs with strong acids. The structures of several of these species have been determined.     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Synthesis and structures of the cuboidal iron-sulfur-nitrosyl-phosphine clusters [Fe4S3(NO)4(PR3)3] (R = Et, Pr, C6H11)

A series of cuboidal iron-sulfur clusters [Fe₄S₃(NO)₄(PR₃)₃]^0,1+ (R = Et, Prⁱ, Cy) were synthesized by two routes: reductive desulfurization of [Fe₄S₄(NO)₄] by tertiary phosphines, and substitution of triphenylphosphine in [Fe₄4S₃(NO)₄(PPh₃)₃] by a more basic phosphine. The structures of 3[Fe₄S₃(NO)₄(PEt₃)₃] · 0.5Et₂O, [Fe₄S₃(NO)₄(PEt₃)₃] [Fe₄S₃(NO)₇] and partially substituted [Fe₄S₃(NO)₄(PPh₃)_2⁻ (PPrⁱ₃)] have been determined by X-ray diffraction in order to define the cuboidal Fe₄S₃ core, previously known only in Roussin's black anion and its reduced form, [Fe₄S₃(NO)₇7]^1−,2−, and as a part of the iron-molybdenum cofactor of nitrogenase.     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

Structural studies on [Mo3S4] and [Mo3S4Cu] complexes with tripodal ligands providing various NxOy (x + Y = 3) donor sets

The interaction of 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (taci) and its N-methylated derivative 1,3,5-trideoxy-1,3,5-tris(dimethylamino)-cis-inositol (tdci) with the incomplete [Mo₃S₄]⁴⁺ cube and the heterometallic [Mo₃S₄Cu]⁴⁺ cube have been investigated by X-ray analysis. The crystal structures of [Mo₃S₄(taci+ rmC₃H₆O-H₂O)₃-4H]·2OH₂O (1a, rhombohedral, space group R32, A = 15.964(3), C = 40.59(1) Å, Z = 6), [Mo₃S₄(tdci)₃]Br₄·9.5EtOH·5H₂O (2a, triclinic, space group

Full-size image

and [CuBrMo₃S₄(tdci)₃]Br₃·11 H₂O·EtOH (3a, monoclinic, space group P2,/n, A = 14.887(3), B = 22.570(4), C = 21.974(5) Å, β = 98.54(2)°, Z = 4) revealed andN-N-O and an N-O-O coordination mode for taci and tdci, respectively. In 1a, taci is coordinated as an anion with deprotonated oxygen and nitrogen donors. In addition, the non-coordinating amino group reacted with one equivalent; of acetone, forming a Schiff base condensation product. For 2a, short Mo---O bonds and high pK_a values (compared to the aqua ion [Mo₃S₄(H₂O)₉]⁴⁺) indicate the formation of a zwitterionic form of the tdci ligand with coordinated alkoxo groups and peripheral dimethylammonium groups. No significant differences were found for the structural properties of the Mo-tdci fragment in 2a and 3a. The coordination modes of taci and tdci, as observed in the solid state, are in agreement with the previously reported solution structures, established by NMR spectroscopy. They are attributed to the specific steric requirements of the two ligands and to a pronounced preference of the [Mo₃(μS)₃(μ₃S)]⁴⁺ core to coordinate a nitrogen donor trans to μ₃S.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Syntheses and properties of organocyanamide, cyanoguanidine and dinitrogen complexes of rhenium. Crystal structure of mer-[ReCl2(NCNEt2) (PMePh2)3]

Treatment of a THF solution of trans-[ReCl(N₂)L₄] (L = PMePh₂) with a cyanamide, NCNR₂ (R = Me, Et or H) or with cyanoguanidine, NCNC(NH₂)₂ , yields mer-[ReCl(N₂)(NCNR₂)L₃] (1) or mer-[Re(N₂)[Re(N₂){NCNC(NH₂)₂}₂L₃]Cl (2), respectively, which, to our knowledge, are the first mixed dinitrogen-cyanamide-type complexes to be reported. The former products (1, R=Me or Et) can also be obtained from reaction of the benzoyldiazenido complex [ReCl₂(NNCOPh)L₃] with NCNR₂ in refluxing methanol; the Re(II) complex mer-[ReCl₂(NCNEt₂)L₃] (3) is also formed (conceivably via an unusual homolysis of the C---N bond of the benzoyldiazenido ligand) and its crystal structure is reported. It shows an unusual pyramidal conformation at the amine N atom of the diethylcyanamide ligand which also exhibits a significant structural trans influence on the phosphine, behaving as a stronger net electron donor than the latter ligand.     

Synthesis, and crystal and molecular structures of the triflato and trifluoroacetato complexes of zinc, Zn(O3SCF3)2(DME)2 and [Zn(O2CCF3)2(DME)]n

Anhydrous Zn(O₃SCF₃)₂ and Zn(O₂CCX₃)₂, X=F, Cl, Br were obtained in substantially quantitative yields from ZnO (or ZnEt₂ in the case of the bromide derivative) and a mixture of the corresponding acid and anhydride in heptane as medium. The reactions are rapid and moderately exothermic. Recrystallization of the triflate and trifluoroacetate complexes from dimethoxyethane (DME) produced single crystals of Zn(O₃SCF₃)₂(DME)₂ (1) and [Zn(O₂CCF₃)₂(DME)]_n (2) suitable for X-ray diffraction studies. In both compounds zinc is hexacoordinated with a pseudo-octahedral geometry. Compound 1 is constituted by mononuclear molecules with terminal monodentate O₃SCF₃ ligands in trans position. A polynuclear chain structure was found for 2 with zinc atoms joined alternatively by triple and single carboxylato bridges, and with bidentate terminal DME.     

Kinetic studies on the reactions of HCl with trans-[MoL(CNPh)(Ph2PCH2CH2PPh2)2] (L=N2, H2 or CO)

The kinetics of the reactions between anhydrous HCl and trans-[MoL(CNPh)(Ph₂PCH₂CH₂PPh₂)₂] (L=CO, N₂ or H₂) have been studied in thf at 25.0 °C. When L=CO, the product is [MoH(CO)(CNPh)(Ph₂PCH₂CH₂PPh₂)₂]⁺, and when L=H₂ or N₂ the product is trans-[MoCl(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]. Using stopped-flow spectrophotometry reveals that the protonation chemistry of trans-[MoL(CNPh)(Ph₂PCH₂CH₂PPh₂)₂] is complicated. It is proposed that in all cases protonation occurs initially at the nitrogen atom of the isonitrile ligand to form trans-[MoL(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]⁺. Only when L=N₂ is this single protonation sufficient to labilise L to dissociation, and subsequent binding of Cl⁻ gives trans-[MoCl(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]. At high concentrations of HCl a second protonation occurs which inhibits the substitution. It is proposed that this second proton binds to the dinitrogen ligand. When L=CO or H₂, a second protonation is also observed but in these cases the second protonation is proposed to occur at the carbon atom of the aminocarbyne ligand, generating trans-[MoL(CHNHPh)(Ph₂PCH₂CH₂PPh₂)₂]²⁺. Addition of the second proton labilises the trans-H₂ to dissociation, and subsequent rapid binding of Cl⁻ and dissociation of a proton yields the product trans-[MoCl(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]. Dissociation of L=CO does not occur from trans-[Mo(CO)(CHNHPh)(Ph₂PCH₂CH₂PPh₂)₂]²⁺, but rather migration of the proton from carbon to molybdenum, and dissociation of the other proton produces [MoH(CO)(CNPh)(Ph₂PCH₂CH₂PPh₂)₂]⁺.     

Synthesis and characterization of two novel cobalt (II) phosphine complexes: crystal structures of [CoCl3(Cy2PCH2PCy2H)] and [Co(NO3)2(Cy2PCH2PCy2O)]. Cy = cyclohexyl, C6H11

The complexes [(Cy₂PCH₂PCy₂H)CoCl₃] (1) and [(Cy₂PCH₂PCy₂O)Co(NO₃)₂] (2), Cy = cyclohexyl (C₆H₁₁), have been prepared and characterized by EPR, UV-Vis, microanalysis and X-ray crystallography. The reaction CoCl₂ · 6H₂O and dcpm, dcpm = bis(dicyclohexylphosphino)methane, was found to form the monomeric, four coordinate, thermochromic and paramagnetic complex [(Cy₂PCH₂PCy₂H)CoCl₃] (1). Of particular interest is the formation of a zwitterion, or inner salt, in which the dangling phosphine adds a hydrogen atom, giving the phosphorus a +1 formal charge. The molecule adopts a pseudo-tetrahedral geometry around the central cobalt atom to which the cyclohexyl groups bind in an equatorial fashion to the phosphine. The reaction of Co(NO₃)₂ · 6H₂O and dcpm in a toluene/methanol/methylene chloride mixture yields the pseudo-octahedral complex [(Cy₂PCH₂PCy₂O)Co(NO₃)₂] (2). The cobalt is in the +2 oxidation state with one of the phosphorus atoms again having a +1 formal charge. The complex adopts a pseudo-octahedral geometry around the central cobalt atom with the cyclohexyl groups binding in an equatorial fashion to the phosphine similar to [(Cy₂PCH₂PCy₂H)CoCl₃].     

A new mixed-valence hexanuclear cobalt complex, [Co4Co2(dea)2(Hdea)4)(piv)4](ClO4)2·H2O: Synthesis, crystal structure and magnetic properties

A new Co^II/Co^III hexanuclear complex, [Co₄^IICo₂^III(dea)₂(Hdea)₄)(piv)₄](ClO₄)₂·H₂O 1, has been obtained by reacting cobalt(II) perchlorate, diethanolamine, and pivalic acid (H₂dea = diethanolamine and piv = pivalato anion). The cobalt ions are held together by four μ₃ and four μ₂ alkoxo bridges as well as by four syn-syn carboxylato groups. The hexanuclear motif contains four Co(II) and two Co(III) ions. The {Co^II₄Co^III₂(μ₂-O)₄(μ₃-O)₄} core can be described as a four face-sharing monovacant and bivacant distorted heterocubane units. The cobalt(III) ions are hexacoordinated. Two of the cobalt(II) are hexacoordinated, while the two others are pentacoordinated with a bipyramidal stereochemistry. The magnetic properties of 1 have been investigated in the temperature range 1.9-300 K. Compound 1 exhibits an overall antiferromagnetic behaviour with a ground singlet spin state.     

Catalytic and electrochemical properties of new manganese(III) compounds of 2-(2′-hydroxyphenyl)-oxazoline (Hphox or HClphox). Molecular structures of [Mn(Clphox)2(MeOH)2](ClO4) and [Mn(phox)2(MeOH)2][Mn(phox)2(ClO4)2](H2O)2

New manganese(III) complexes of Hphox (2-(2′-hydroxyphenyl)-oxazoline) and HClphox (2-(5′-chloro-2′-hydroxyphenyl)-oxazoline) have been synthesised. The X-ray structures of [Mn(phox)₂(MeOH)₂][Mn(phox)₂(ClO₄)₂](H₂O)₂ and [Mn(Clphox)₂(MeOH)₂](ClO₄) show the manganese(III) ions to be octahedrally coordinated with methanol or perchlorate at the axial coordination sites. The cyclic voltammograms of the complexes, with the exception of [Mn(phox)₂(acac)] (Hacac=2,4-pentanedione), show an irreversible reduction wave of manganese(III) to manganese(II). After addition of an excess of 1-methylimidazole (1-Meim), the reduction process shifts towards lower potentials and becomes (quasi-) reversible, indicating that the presence of 1-Meim affects the catalytic efficiency of the complexes. The complexes catalyse the epoxidation of styrene by dihydrogen peroxide. The cumulative turnover numbers towards styrene oxide obtained after 15 min. vary from 16 for [Mn(Clphox)₂(MeOH)₂](ClO₄) to 26 for [Mn(phox)₂(acac)]. Ligand degradation appears to be the limiting factor for obtaining higher turnover numbers.     

Cyano-bridged cluster-metal coordination compound: synthesis and crystal structure of [Cu(NH3)3][Cu(NH3)4][Cu(NH3)5][W4Te4(CN)12]·5H2O

Dark-brown single crystals of the title compound 1 were obtained in high yield by layering a CuCl₂ solution in 25% aqueous ammonia on a glycerol solution of K₆[W₄Te₄(CN)₁₂]·5H₂O. The complex 1 was characterized by single crystal X-ray diffraction analysis and IR spectroscopy. The X-ray structure of 1 reveals a polymeric chain cyano-bridged cluster-metal coordination compound. The [W₄Te₄(CN)₁₂]⁶⁻ cluster anions are linked one to another by Cu²⁺ cations through coordination by nitrogen atoms of the CN groups.     

Mg-activated double-stranded DNA cleavage by [(bpy)2(OH2)Ru---O---Ru(H2O) (bpy)2]

The reaction of the title complex with DNA has been examined. Addition of [(bpy)₂(OH₂)RuORu(OH₂) (bpy)₂]⁴⁺ to DNA leads to the reduction of the complex to Ru(bpy)₂(OH₂)₂²⁺, as indicated by absorption spectroscopy and cyclic voltammetry. The reaction is accelerated by Mg²⁺. The combined evidence points to a mechanism where the oxo-bridged dimer is hydrolyzed to a monomeric Ru(III) complex that is capable of oxidizing DNA to effect strand scission. Gel electrophoresis demonstrates nicking of supercoiled /gfX174 DNA by [(bpy)₂(OH₂)RuORu(OH₂) (bpy)₂]⁴⁺, and double-stranded cleavage is observed in the presence of Mg²⁺. Linearization of the plasmid prior to treatment with the complex does not lead to further fragmentation, suggesting that supercoiling is required to realize double-stranded cleavage.     

Five-coordinate rhenium(III)-thiolato complexes: the structure of [Re(SCH2PhOCH3)3(PPh3)2]

A novel five-coordinate rhenium(III)-thiolato complex, Re(SCH₂C₆H₄OCH₃-p)₃(PPh₃)₂ has been isolated during the reaction of trans-ReOCl₃(PPh₃)₂ with p-methoxybenzyl mercaptan. In the unexpected structure that was acquired, the central metal has undergone a reduction from Re(V) to Re(III). The five-coordinate Re(III) complex has been characterized by spectroscopic methods, elemental analysis and X-ray crystallography. X-ray crystallographic studies showed the coordination geometry around rhenium to be that of a trigonal bipyramid. The basal plane is defined by three sulfur atoms of the monodentate ligand, while the two apical positions are occupied by two phosphines of the precursor.     

Studies of the oxovanadium(IV)—oxalate system: syntheses and crystal structures of binuclear (Ph4P)2[(VO)2(H2O)2(C2O4)3]·4H2O and of the one-dimensional chain material, (Ph4P)[VOCl(C2O4)]

The hydrothermal reactions of (Ph₄P)[VO₂Cl₂] and H₂C₂O₄ at 150 and 125°C yield (Ph₄P)₂[V₂O₂(H₂O)₂(C₂O₄)₃]·4H₂O (1) and (Ph₄P)[VOCl(C₂O₄)] (2), respectively. The structure of the molecular anion of 1 consists of a binuclear unit of oxovanadium(IV) octahedra bridged by a bisbidentate oxalate group. The VO₆ coordination geometry at each vanadium site is defined by a terminal oxo group, an aquo ligand, and four oxygen donors — two from the bisbidentate bridging oxalate and two from the terminal bidentate oxalate. The structure of 2 consists of discrete Ph₄P⁺ cations occupying regions between [VOCl(C₂O₄)]⁻_∞ spiral chains. The structure of the one-dimensional anionic chain exhibits V(IV) octahedra bridged by bisbidentate oxalate groups. Crystal data: 1·4H₂O, monoclinic P2₁/n, A = 12.694(3), B = 12.531(3), C = 17.17(3) Å, β = 106.32(2)°, V = 2621.3(13) ų, Z = 2, D_calc = 1.501 g cm⁻³, structure solution and refinement converged at a conventional residual of 0.0518; 2, tetragonal P4₃, A = 12.145(2), C = 15.991(3) Å, V = 2358.7(12) ų, Z = 4, R = 0.0452.     

Main group derivatives of a cyclometallated iron carbonyl anion. Crystal structures of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(SnPh3) and two isomers of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(I)

The iron hydrido complex HFe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄} (1), was rapidly deprotonated by DBU or [BzMe₃N][OH] in THF to afford the new carbonyl iron anion [Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}]⁻ ([2]⁻), containing an ortho-metallated triphenyl phosphite ligand. Complex [2]⁻ reacted with triorganostannyl and plumbyl salts and with halogens to give the octahedral Fe^II compounds Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}(X) (X=SnPh₃, 3; SnMe₃, 4; PbPh₃, 5; PbMe₃, 6; Cl, 7; Br, 8; I, 9). The Group 14 complexes 3-6 were obtained in one isomeric form in which the P^III-donor atoms are mutually cis, the carbonyl ligands are cis and the P(OPh)₃ and MR₃ (M=Sn, Pb; R=Ph, Me) groups are trans as determined by solution-state IR, ³¹P and ¹³C NMR spectroscopic data. This geometry was confirmed for 3 by a single crystal X-ray diffraction study. The halide complexes, however, were obtained as a mixture of isomers. The major isomer (7, X=Cl; 8a, X=Br; 9a, X=I) has cis P atoms, trans CO groups and the halide located trans to the phosphorus atom of the ortho-metallated phosphite ligand. The structure of 9a was confirmed by an X-ray diffraction study. Two other isomers, designated 8b (X=Br) and 9b (X=I), with cis P atoms and cis CO groups were isolated from the reactions of [2]⁻ with Br₂ and I₂, respectively. The structure of the latter was established by X-ray crystallography and is related to 9a by exchange of the P(OPh)₃ ligand and a carbonyl group such that the metal-bound C atom of the five-membered metallacycle is trans to CO. The stereo-geometry of 8b could not be unambiguously assigned from the spectroscopic data; however, two of the seven possible geometric isomers were suggested as plausible structures.     

Synthesis and structure of [{C7F15CO2}2AgAu(PPh3)]2 and its use in electrodeposition of gold-silver alloys

[{C₇F₁₅CO₂}₂AgAu(PPh₃)]₂ is obtained in good yield from the reaction of [C₇F₁₅CO₂Ag] with [ClAuPPh₃] in THF solution. The crystal structure shows a zig-zag Au-Ag-Ag-Au core with fluorocarboxylate ligands bridging the Au-Ag and Ag-Ag bonds and triphenylphosphine groups bound to Au. Electrodeposition from acetonitrile yields Au-Ag alloys. The deposited alloys are Ag rich and the composition varies with deposition potential.     

Syntheses, spectra and crystal structures of ruthenium(II) complexes with polypyridyl: [Ru(bipy)2(phen)](ClO4)2 · H2O and [Ru(bipy)2(Me-phen)](ClO4)2

Two ruthenium(II) complexes with polypyridyl, Ru(bipy)₂(phen)](ClO₄)₂·H₂O (1) and [Ru(bipy)₂(Me-phen)](ClO₄)₂ (2), (phen = 1,10-phenanthroline, bipy = 2,2′-bipyridine, Me-phen = 5-methyl-1,10-phenanthroline), were synthesized and characterized by IR, MS and NMR spectra. Their structures were determined by single crystal X-ray diffraction techniques. The strong steric interaction between the polypyridyl ligands was relieved neither by the elongation of the Ru---N bonds nor increase of the N---Ru---N bite angles. The coordination sphere was distorted to relieve the ligand interaction by forming specific angles (δ) between the polypyridyl ligand planes and coordination planes (N---Ru---N), and forming larger twisted angles between the two pyridine rings for each bipy. The bond distances of Ru---N(bipy) and Ru---N(phen) were virtually identical with experimental error, as expected of π back-bonding interactions which statistically involve each of the ligands present in the coordination sphere.