Optically active iridium complexes with cyclopentadienyl-phosphine ligands: synthesis and oxidative addition of methyl iodide

The dimer [Ir(μ-Cl)(C₈H₁₄)₂]₂ reacts with the ligands (S)-(C₅H₄CH₂CH(Ph)PPh₂)Li and (R)-(C₅H₄CH(Cy)CH₂PPh₂)Li to give (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(C₈H₁₄)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(C₈H₁₄)], which upon treatment with CH₃I at room temperature afford the cationic iridium(III) compounds (S,S_Ir)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(C₈H₁₄)][I] as a single diastereomer, and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(C₈H₁₄)][I] as a 9:1 mixture of two diastereomers. If the oxidative addition reaction is performed at reflux in methylene chloride, the starting complexes convert to the neutral compounds (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(I)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(I)] as 1.6:1 and 3.3:1 mixtures of diastereoisomers, respectively. Carbonyl iridium complexes are synthesized by reacting [IrCl(CO)(PPh₃)₂] with the ligands to afford (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CO)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CO)]. They give upon treatment with CH₃I the cationic species (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(CO)][I] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(CO)][I] as 1.6:1 and 3:1 mixture of diastereomers, respectively. No migratory-insertion of the methyl group into the carbonyl-metal bond has been observed even after prolonged heating.     

Synthesis of trialkyl[60]fullerene C60(CH2SiMe3)3H and its potassium and rhodium(I) complexes

The reaction of [60]fullerene with Me₃SiCH₂MgCl in 1,2-Cl₂C₆H₄/THF (1/1) under dry air afforded a bis-alkyl adduct, C₆₀(CH₂SiMe₃)₂ (1), in 54% yield. Treatment of 1 with Me₃SiCH₂MgCl in THF under argon then afforded a trialkyl[60]fullerene, C₆₀(CH₂SiMe₃)₃H (2), in 37% yield. Further treatment of 2 with KO^tBu gave a potassium salt, [K(thf)_n][C₆₀(CH₂SiMe₃)₃] (3), which was then converted to a C_s-symmetric Rh(I) complex, Rh[η⁵-C₆₀(CH₂SiMe₃)₃](1,5-cyclooctadiene) (4), in 91% yield.     

Synthesis of fac-[Os(CO)3(L)Me2] (L = THF or MeCN) and some reactions with PPh3 and trityl salts

The reaction of cis-[Os(CO)₄Me₂] with Me₃NO in the THF or MeCN yields the complexes fac-[Os(CO)₃(L)Me₂] (where L = THF or MeCN). Whereas the THF complex is unstable and only characterised spectroscopically, fac-[Os(CO)₃(MeCN)Me₂] has been isolated as a white solid and fully characterized by both analytical and spectroscopic methods. These complexes fac-[Os(CO)₃(L)Me₂] are shown to be useful intermediates. Thus, reaction with PPh₃ gives fac-[Os(CO)₃(PPh₃)Me₂] in good yield.Reactions of fac-[Os(CO)₃(L)Me₂] (L = CO or MeCN) with CPh₃PF₆ or B(C₆F₅)₃ have been investigated. Whereas cis-[Os(CO)₄Me₂] showed no reaction with either CPh₃PF₆ or B(C₆F₅)₃, the reaction of fac-[Os(CO)₃(MeCN)Me₂] with CPh₃PF₆ in CH₂Cl₂ occurred over 16 h at room temperature to give an unstable cationic product and CPh₃Me. The reaction was monitored by both IR and NMR spectroscopies. When this reaction of fac-[Os(CO)₃(MeCN)Me₂] was carried out in the presence of a trapping ligand such as MeCN, the stable cationic product [Os(CO)₃(MeCN)₂Me]⁺ could be isolated and identified spectroscopically.     

Reactivity of phenyldi(2-thienyl)phosphine towards group 7 metal carbonyls: Carbon-phosphorus bond activation

Addition of phenyldi(2-thienyl)phosphine (PPhTh₂) to [Re₂(CO)_10−n(NCMe)_n] (n = 1, 2) affords the substitution products [Re₂(CO)_10−n(PhPTh₂)_n] (1, 2) together with small amounts of fac-[ClRe(CO)₃(PPhTh₂)₂] (3) (n = 2). Reaction of [Re₂(CO)₁₀] with PPhTh₂ in refluxing xylene affords a mixture which includes 2, [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-H)] (4), [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-η¹,κ¹(S)-C₄H₃S)] (5) and mer-[HRe(CO)₃(PPhTh₂)₂] (6). Phosphido-bridged 4 and 5 are formed by the carbon-phosphorus bond cleavage of the coordinated PPhTh₂ ligand, the cleaved thienyl group being retained in the latter. Reaction of [Mn₂(CO)₁₀] with PPhTh₂ in refluxing toluene affords [Mn₂(CO)₉(PPhTh₂)] (7) and the carbon-phosphorus bond cleavage products [Mn₂(CO)₆(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (8) and [Mn₂(CO)₅(PPhTh₂)(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (9). Both 8 and 9 contain a bridging thienyl ligand which is bonded to one manganese atom in a η⁵-fashion.     

Molecular sensing behavior of the first Mn(I)-compound of di-2-pyridylketone-p-nitrophenylhydrazone (dpknph), fac-[Mn(CO)3(dpknph)Br]

The reaction between [Mn(CO)₅Br] and di-2-pyridylketone-p-nitrophenylhydrazone (dpknph) in diethyl ether under ultrasonic conditions gave fac-[Mn(CO)₃(dpknph)Br] in good yield. Optical and thermodynamic measurements on fac-[Mn(CO)₃(dpknph)Br] in non-aqueous polar solvents revealed reversible interconversion between two intense charge transfer absorption bands due to π-π* (dpk), followed by dpk → nitro intraligand charge transfer transition (ILCT), mixed with metal ligand charge transfer transition (MLCT) due to . In non-polar solvents, a single absorption band appeared. Extinction coefficients of 46 200 ± 2000 and 28 400 ± 2000 M⁻¹ cm⁻¹ were calculated in DMSO for the low- and high-energy electronic states of fac-[Mn(CO)₃(dpknph)Br] using excess NaBF₄. Changes in enthalpy (ΔH^ø) of +14.0 and −12.1 kJ mol⁻¹, entropy (ΔS^ø) of +28.65 and −64.30 J mol⁻¹ K⁻¹, and free energy (ΔG^ø) of +5.48 and +7.08 kJ mol⁻¹ at 298 K were calculated for the interconversion between the high and low energy electronic states of fac-[Mn(CO)₃(dpknph)Br]. These results allow for the use of these systems (fac-[Mn(CO)₃(dpknph)Br] and surrounding solvent or solute molecules) as optical sensors for a variety of physical and chemical stimuli that include metal ions. Group 12 metal ions in concentrations as low as 1.00 × 10⁻⁹ M can be detected and determined using fac-[Mn(CO)₃(dpknph)Br] in dmso in the presence and absence of NaBH₄.     

Synthesis and properties of new trinuclear Mo(II) complexes containing imidazole and benzimidazole ferrocene units

The reaction of FcCOCl (Fc = (C₅H₅)Fe(C₅H₄)) with benzimidazole or imidazole in 1:1 ratio gives the ferrocenyl derivatives FcCO(benzim) (L1) or FcCO(im) (L2), respectively. Two molecules of L1 or L2 can replace two nitrile ligands in [Mo(η³-C₃H₅)(CO)₂(CH₃CN)₂Br] or [Mo(η³- C₅H₅O)(CO)₂(CH₃CN)₂Br] leading to the new trinuclear complexes [Mo(η³-C₃H₅)(CO)₂(L)₂Br] (C1 for L = L1; C3 for L = L2) and [Mo(η³-C₅H₅O)(CO)₂(L)₂Br] (C2 for L = L1; C4 for L = L2) with L1 and L2 acting as N-monodentade ligands. L1, L2 and C2 were characterized by X-ray diffraction studies. [Mo(η³-C₅H₅O)(CO)₂(L1)₂Br] was shown to be a trinuclear species, with the two L1 molecules occupying one equatorial and one axial position in the coordination sphere of Mo(II). Cyclic voltammetric studies were performed for the two ligands L1 and L2, as well as for their molybdenum complexes, and kinetic and thermodynamic data for the corresponding redox processes obtained. In agreement with the nature of the frontier orbitals obtained from DFT calculations, L1 and L2 exhibit one oxidation process at the Fe(II) center, while C1, C3, and C4 display another oxidation wave at lower potentials, associated with the oxidation of Mo(II).     

Tungsten complexes of aromatic and aliphatic thioaldehydes

Reaction of PPN[W(CO)₃(R₂PC₂H₄PR₂)(SH)] (PPN=Ph₃PNPPh₃; R=Me, 1; R=Ph, 2) with aromatic aldehydes in the presence of trifluoroacetic acid gave tungsten complexes of thiobenzaldehydes mer-[W(CO)₃(R₂PC₂H₄PR₂)(η²-SCHR^′)] (R=Me, 3a-3f; R=Ph, 4a-4e) in high yields. Analogous complexes of aliphatic thioaldehydes mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-SCHR^′)] (3g-3l) could only be obtained from the highly electron-rich thiolate complex 1. The structure of 3i (R^′=i-Bu) was determined by X-ray crystallography. In solution the complexes 3 and 4 are in equilibrium with small quantities of their isomers fac-[W(CO)₃(R₂PC₂H₄PR₂)(η²-SCHR^′)]. Reaction of complexes 3 with dimethylsulfate followed by salt metathesis with NH₄PF₆ gave the alkylation products mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-MeSCHR^′)]PF₆ (5a-5l) as mixtures of E and Z isomers. The methylated thioformaldehyde complex mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-MeSCH₂)]PF₆ (5m) was prepared similarly. Nucleophilic addition of hydride (from LiAlH₄) to 5 initially gave thioether complexes mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(MeSCH₂R^′)] (mer-6) which rapidly isomerized to fac-[W(CO)₃(Me₂PC₂H₄PMe₂)(MeSCH₂R^′)] (fac-6).     

Oxidation of [Ir(η-C5Me5)(C3S5)] [C3S5 = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] and X-ray crystal structure of [IrBr(η-C5Me5)(μ-C2S4)IrBr(η-C5Me5)]

[Ir(η⁵-C₅Me₅)(C₃S₅)] [C₃S₅²⁻ = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] was prepared by a reaction of [NMe₄]₂[C₃S₅] with [Ir(η⁵- C₅Me₅)Cl₂]₂ in ethanol. It was reacted with bromine to afford a paramagnetic species [IrBr(η⁵-C₅Me₅)(C₃S₅)] with the Ir-Br bond and in the one-electron-oxidized state, and a diamagnetic dinuclear species [IrBr(η⁵-C₅Me₅)(μ-C₂S₄)IrBr(η⁵-C₅Me₅)]. ESR spectra for the one-electron-oxidized species in solution are discussed. The X-ray crystal structural analysis for the latter complex revealed the geometry consisting of dinuclear IrBr(η⁵-C₅Me₅) moieties bridged by the C₂S₄²⁻ ligand.     

Low temperature allene coupling and isomerization at triosmium clusters

Facile coupling and isomerization of allene (CH₂CCH₂) has been found on its interaction at low temperatures with [H₂Os₃(CO)₁₀] to give the di-allyl species [Os₃(μ₃-η¹:η²:η³-C₆H₈)(CO)₁₀] (1) and [Os₃(μ₃-η¹:η²:η³-C₆H₈)(CO)₉] (2) in which two allene molecules are bonded in an end-to-centre array. Cluster 2 converts either in solution or in the solid state into two different species: the colourless derivative [Os₃H(μ₃-η¹:η¹:η¹:η²-C₆H₇)(CO)₉] (3) and the metallocyclopentadiene [Os₃(μ-η¹:η¹:η²:η²-C₆H₈)(CO)₉] (4), which could be regarded as the result of 1,3-hydrogen shifts of the coupled allene at triosmium clusters.     

Reactions of the fac-[Re(CO)3] and [ReO] moieties with substituted benzothiazoles

The reaction of 2-(2-aminophenyl)benzothiazole (Habt) with [Re(CO)₅Br] led to the isolation of the rhenium(I) complex fac-[Re(Habt)(CO)₃Br] (1). With trans-[ReOCl₃(PPh₃)₂], the ligand Habt decomposed to form the oxofree rhenium(V) complex [Re(itp)₂Cl(PPh₃)] (2) (itp = 2-amidophenylthiolate). From the reaction of trans-[ReOBr₃(PPh₃)₂] with 2-(2-hydroxyphenyl)benzothiazole (Hhpd) the complex [Re^VOBr₂(hpd)(PPh₃)] (3) was obtained. Complexes 1-3 are stable and lipophilic. ¹H NMR and infrared assignments, as well as the X-ray crystal structures, of the complexes are reported.     

C-ansa-zirconocene complexes with O/S donor ligands: Novel homoleptic six coordinate 4-mercaptophenolate complex of Zr(IV)

New C-ansa-zirconocene complexes containing methoxythiophenolate and mercaptophenolate ligands have been synthesized and characterized. The reaction of (HSC₆H₄-n-OMe) (n = 2, 3 or 4) with [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}Me₂] (1) led to the formation of monosubstituted complexes [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}Me(κ,S-SC₆H₄-n-OMe)] (n = 2 (2); n = 3 (3)) and the disubstituted complex [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}(κ,S-SC₆H₄-4-OMe)₂] (4). The complexes [Zr{(R)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}(κ,O-OC₆H₄-4-SH)₂] (R = t-Bu (6); R = CH₂CHCH₂ (7)) and [Zr(η⁵-C₅H₄)₂(OC₆H₄-n-SH)₂] (n = 3 (9); n = 4 (10)) have been synthesized using the corresponding dimethyl zirconocene and mercaptophenol. However, the reaction of [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (11) with 4-mercaptophenol in the presence of NEt₃ led to the formation of the first example of a homoleptic six-coordinate mercaptophenolate complex of zirconium, namely [HNEt₃]₂[Zr(κ,O-OC₆H₄-4-SH)₆] (12). Complex 12 can be obtained in higher yield by the reaction of ZrCl₄ with six equivalents of 4-mercaptophenol and NEt_3. The reaction of 12 with [Zr(η⁵-C₅H₄)₂Cl₂] gave the unexpected disubstituted complex [Zr(η⁵-C₅H₄)₂(OC₆H₄-4-SH)₂] (10). The molecular structures of 4 and 12 have been determined by single-crystal X-ray diffraction studies.     

An NMR study of some reactions of an arachno-molybdapentaborane: Formation of an unstable nido-molybdapentaborane

Photolysis of the molybdaborane [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-arachno-2-MoB₄H₇] (1) in benzene-d₆ gives ca. 60% conversion to the compound [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-nido-2-MoB₄H₅] (2). Compound 2 could not be isolated as a solid and is thermally unstable at 20 °C in solution with a half-life of 3-4 h. Repeated photolysis and thermolysis of 1 in the presence of BH₃ · thf gives a low yield of the known metallacarbaborane [(η⁵-C₅H₅)(η²:η³-C₃H₃)-closo-1-MoC₂B₉H₉] (3) suggesting that 3 is formed from 1 via 2. Reaction of 1 with PEt₃ gives initially [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-arachno-2-MoHB₄H₄PEt₃] (4). Longer reaction times (>10 min, 20 °C) give in addition [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-arachno-1-MoHB₃H₃PEt₃] (5). Both 4 and 5 are unstable in solution or the solid state decomposing to the molybdacarbaborane [(η⁵-C₅H₅)(η³:η²- C₃H₃)-nido-1-MoC₂B₃H₅] (6), [Mo(η-C₅H₅)₂H₂] and BH₃ · PEt₃. Compound 1 is deprotonated cleanly by KH in thf at the Mo-H-B bridging proton to give (7).     

Comparative reactivity study of cyclopentadienyl and fulvalene molybdenum complexes

The reactions of cis-1,1′-[η⁵:η⁵-(C₅H₃CO₂Me)₂]Mo₂(CO)₆ (1), in the presence of 1 equiv. of Me₃NO, and [(η⁵-C₅H₄CO₂Me)Mo(CO)₃]₂ (2) with dppe produce CO labilization and formation of the dinuclear zwitterions trans-1,1′-[η⁵:η⁵-(C₅H₃CO₂Me)₂]Mo₂(CO)₅(dppe) (3) and disproportionation species [(η⁵-C₅H₄CO₂Me)Mo(CO)₂(dppe)]⁺ [(η⁵-C₅H₄CO₂Me)Mo(CO)₃]⁻ (4), respectively. Using the same method, the reactions of trans-1,1′-[η⁵:η⁵-(C₅H₃CO₂Me)₂]Mo₂(CO)₆I₂ and (η⁵-C₅H₄CO₂Me)Mo(CO)₃I with PPh₃ in the presence of 1 and 2 equiv. of Me₃NO yield trans-1,1′-[η⁵:η⁵-(C₅H₃CO₂Me)₂]Mo₂(CO)₄(PPh₃)₂I₂ (5) and (η⁵-C₅H₄CO₂Me)Mo(CO)₂(PPh₃)I (6). The reactions of the several anionic carbonyl species {trans-1,1′-[η⁵:η⁵-(C₅H₃CO₂Me)₂]Mo₂(CO)₆}²⁻, [(η⁵:η⁵-C₁₀H₈)W₂(CO)₆]²⁻ and [(η⁵-C₅H₄CO₂Me)Mo(CO)₃]⁻ with S₂Ph₂ give rise to the thiolate–fulvalene complexes cis-1,1′-[η⁵:η⁵-(C₅H₃CO₂Me)₂]Mo₂(CO)₄(μ-SPh)₂ (7) and (η⁵:η⁵-C₁₀H₈)W₂(CO)₆(SPh)₂ (8) and the thiolate-bridged dimer [(η⁵-C₅H₄CO₂Me)Mo(CO)(μ-SPh)]₂ (9). Treatment of 6 with 1 equiv. of HCCCCH and with (η⁵-C₅H₅)Mo(CO)(dppe)(CCCCH), in the presence of CuI at room temperature, afford the cyclopentadiene complexes (η⁵-C₅H₄CO₂Me)Mo(CO)₂(PPh₃)(CCCCH) (10) and (η⁵-C₅H₄CO₂Me)(PPh₃)(CO)₂Mo(CCCC)Mo(CO)(dppe)(η⁵-C₅H₅) (11), respectively. The reaction of (η⁵-C₅H₅)Mo(CO)(dppe)(CCCCH) with Co₂(CO)₈ yields [Co₂{μ-HC₂CC[Mo(CO)(dppe)(η⁵-C₅H₅)]}(CO)₆] (12). All the new compounds have been characterized by analytical and spectroscopic methods.     

Novel thermolytic products and their structures derived from thermolysis of isomerized products of spiro[4.4]nona-1,3-diene(dicarbonyl)[ethoxy(aryl)carbene]iron phosphine adducts [(η-C9H12)Fe{C(OC2H5)Ar}(CO)2PPh3]

Heating a benzene solution of the isomerized product of spiro[4.4]nona-1,3-diene(dicarbonyl)[ethoxy(aryl)carbene]iron phosphine adduct [(η³-C₉H₁₂)Fe{C(OC₂H₅)(C₆H₄CH₃-o)}(CO)₂PPh₃] (1) in a sealed quartz tube at 85-90 °C for 72 h gave the ring-opened η⁴ olefin-coordinated dicarbonyliron phosphine complex [Fe{η⁴-C₅H₇CHCHCH₂CHC(OC₂H₅)C₆H₄CH₃-o}(CO)₂PPh₃] (3) and cyclobutane derivative [C₂₄H₂₂O₇] (4). The thermal decomposition of analogous isomerized product [(η³-C₉H₁₂)Fe{C(OC₂H₅)(C₆H₄CH₃-p)}-(CO)₂PPh₃] (2) afforded the corresponding η⁴ olefin-coordinated dicarbonyliron phosphine complex [Fe{η⁴-C₅H₇CHCHCH₂CHC(OC₂H₅)C₆H₄CH₃-p}(CO)₂PPh₃] (6) and compound 4. The structures of products 3 and 4 have been established by X-ray diffraction studies.     

On the mechanism of formation and spectral properties of radical anions generated by the reduction of -[Re(CO)3(5-nitro-1,10-phenanthroline)] and -[Re(CO)3(3,4,7,8-tetramethyl-1,10-phenanthroline)] pendants in poly-4-vinylpyridine polymers

The electrochemical reduction in aprotic media of -[Re^I(CO)₃L]⁺ pendants in poly-4-vinylpyridine polymers is compared to that of [Re^I(CO)₃L]⁺ complexes (L = 5-nitro-1,10-phenanthroline and 3,4,7,8-tetramethyl-1,10-phenanthroline). The UV-Vis absorption spectra of the reduced radical anions of 5-nitro-1,10-phenanthroline (NO₂-phen) and 3,4,7,8-tetramethyl-1,10-phenanthroline (tmphen) were obtained by spectro-electrochemistry of [Re^I(CO)₃(NO₂-phen)(CH₃CN)]⁺ and [Re^I(CO)₃(tmphen)(CH₃CN)]⁺, respectively. Similar spectra were obtained for the radical anions -phen and tmphen⁻ after pulse radiolysis experiments with -[Re^I(CO)₃L]⁺-containing polymers. The analysis of the time-resolved difference spectra was performed using “multivariate curve resolution” (MCR) techniques. Unlike , CH₂OH radicals were unable to reduce tmphen ligands. The reaction of and/or CH₂OH with -[Re^I(CO)₃(NO₂-phen)]⁺-containing polymers generates -[Re^I(CO)₃(-phen)] pendants which after disproportionation give rise to products with λ_max = 380 nm. The kinetic behavior of -[Re^I(CO)₃(-phen)] pendants under different experimental conditions is discussed.     

Synthesis of benzene ruthenium triazolato complexes by [3+2] cycloaddition reactions of activated alkynes and fumaronitrile to benzene ruthenium azido complexes

The dinuclear complex [(η⁶-C₆H₆)Ru(μ-N₃)Cl]₂ (1) is obtained by the reaction of [(η⁶-C₆H₆)RuCl₂]₂ with sodium azide in ethanol. The benzene ruthenium β-diketonato complexes of the general formula [(η⁶-C₆H₆)Ru(L∩L)Cl] {L∩L = O,O′-acac (2); O,O′-bzac (3); O,O′-dbzm (4)} are obtained in methanol by the reaction of [(η⁶-C₆H₆)RuCl₂]₂ with the corresponding β-diketonates. These complexes further react with sodium azide in ethanol to yield complexes of the type [(η⁶-C₆H₆)Ru(L∩L)N₃] [L∩L = O,O′-acac (5); L∩L = O,O′-bzac (6); L∩L = O,O′-dbzm (7)]. The complexes 5-7 are obtained as well by treating 1 with sodium salts of β-diketonates. These neutral benzene ruthenium azido complexes undergo [3+2] dipolar cycloaddition reaction with activated alkynes (MeO₂CCCCO₂Me, EtO₂CCCCO₂Et) or fumaronitrile (NCHCCHCN) to yield the corresponding benzene ruthenium triazolato complexes; [(η⁶-C₆H₆)Ru(O,O′-acac){N₃C₂(CO₂Me)₂}] (8), [(η⁶-C₆H₆)Ru(O,O′-acac){N₃C₂(CO₂Et)₂}] (9), [(η⁶-C₆H₆)Ru(O,O′-acac){N₃C₂HCN}] (10), [(η⁶-C₆H₆)Ru(O,O′-bzac){N₃C₂HCN}] (11) and [(η⁶-C₆H₆)Ru(O,O′-dbzm){N₃C₂HCN}] (12). These complexes are fully characterized on the basis of microanalyses, FT-IR and FT-NMR spectroscopy. The molecular structure of [(η⁶-C₆H₆)Ru(O,O′- acac){N₃C₂(CO₂C₂H₅)₂}] (9) is confirmed by single crystal X-ray diffraction study.     

Synthesis of cyclopentadienyl ruthenium(II) complexes containing tethered functionalities

The reaction of [C₅H₄(CH₂)_nX]Tl (1: n = 2, X = NMe₂, OMe, CN; n = 3, X = NMe₂) with [(η⁶-C₆H₆)RuCl(μ-Cl)]₂, 2, afforded the sandwich compounds [{η⁵-C₅H₄(CH₂)_nX}Ru(η⁶-C₆H₆)]PF₆, 3, and [η⁵-C₅H₄(CH₂)_nX]₂Ru, 4. Photolytic cleavage of 3 in acetonitrile afforded the tethered products [{η⁵:κN-C₅H₄(CH₂)_nX}Ru(CH₃CN)₂]PF₆, 5.     

Synthesis, characterization and applications in ethylene polymerization of asymmetric ansa-titanocene complexes. Molecular structure of [Ti{Me2Si(η-C5Me4)(η-C5H3iPr)}Cl2]

The ansa-titanocene complexes, [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃R)}Cl₂] (R = Me (5), iPr (6), tBu (7), SiMe₃ (8)), were obtained from the reaction of Li₂{Me₂Si(C₅Me₄)(C₅H₃R)} (R = Me (1), iPr (2), tBu (3), SiMe₃ (4)) with [TiCl₄(THF)₂], respectively. Compounds 5-8 have been tested as catalysts in the polymerization of ethylene and compared with the ansa-titanocene complexes [Ti{Me₂Si(η⁵-C₅H₄)₂}Cl₂] and [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂]. The resulting polyethylene showed molecular weights of about 200 000 g mol⁻¹ and polydispersity values of approximately 3. In addition, the molecular structure of 6 has been determined by single crystal X-ray diffraction studies.     

Synthesis of tantalum and niobium complexes that contain the diamidoamine ligand, [(3,4,5-F3C6H2NCH2CH2)2NMe], and the triamidoamine ligand, [(3,5-Cl2C6H3NCH2CH2)3N]

Several niobium and tantalum compounds were prepared that contain either the diamidoamine ligand, [(3,4,5-F₃C₆H₂NCH₂CH₂)₂NMe]²⁻ ([F₃N₂NMe]²⁻), or the triamidoamine ligand, [(3,5-Cl₂C₆H₃NCH₂CH₂)₃N]³⁻ ([Cl₂N₂NMe]³⁻). The former include [F₃N₂NMe]TaCl₃, [F₃N₂NMe]NbCl₃, [F₃N₂NMe]TaMe₃, [F₃N₂NMe]NbMe₃, [(F₃N₂NMe)TaMe₂][MeB(C₆F₅)₃], [F₃N₂NMe]Ta(CHSiMe₃)(CH₂SiMe₃), [F₃N₂NMe]Ta(CH₂-t-Bu)Cl₂, [F₃N₂NMe]Ta(CH-t-Bu)(CH₃), and [F₃N₂NMe]Ta(η²-C₂H₄)(CH₂CH₃). The latter include [Cl₂N₂NMe]TaCl₂, [Cl₂N₂NMe]TaMe₂, [Cl₂N₂NMe]Ta(η²-C₂H₄), and [Cl₂N₂NMe]Ta(η²-C₂H₂).X-ray diffraction studies were carried out on [F₃N₂NMe]Ta(CHSiMe₃)(CH₂SiMe₃), [F₃N₂NMe]Ta(η²-C₂H₄)(CH₂CH₃), and [Cl₂N₂NMe]TaMe_2..     

Preparation of planar chiral ferrocenes containing a fluorous alcohol function

Ferrocene reacts with hexafluoroacetone trihydrate in refluxing octane to afford >80% yields of [CpFe(η⁵-C₅H₄C(CF₃)₂OH)] (X-ray), carrying out the reactions at 180 °C gives an additional 5% yield of [Fe(η⁵-C₅H₄C(CF₃)₂OH)₂] (X-ray).The mono alcohol is lithiated with Bu^tOK/BuⁿLi/TMEDA affording partial conversion to mixtures of [CpFe(1,2-η⁵-C₅H₃C(CF₃)₂OH)(X)] and [Fe(η⁵-C₅H₄X)(1,2-η⁵-C₅H₃C(CF₃)₂OH)(X)] (X = SMe, CPh₂OH) upon reaction with Me₂S₂ or OCPh₂.For X = CPh₂OH both structures are crystallographically characterised.Enantiopure [CpFe(1,2-η⁵-C₅H₃C(CF₃)₂OH)(SMe)] can be prepared from (R)-[CpFe(η⁵-C₅H₄S(O)C₆H₄Me)] via [CpFe(1,2-η⁵-C₅H₃S(O)C₆H₄Me)(C(CF₃)₂OH)] (X-ray) or [CpFe(1,2-η⁵-C₅H₃S(O)C₆H₄Me)(SMe)].Related procedures allow the preparation of [CpFe(1,2-η⁵-C₅H₃CPh₂OH)(Y)] (Y = SMe, CHO (X-ray), C(CF₃)₂OH) and[CpFe(1,2-η⁵-C₅H₃C(CF₃)₂OH)(CHO)].