A structural investigation of the heterobimetallic carbocation complex [Cp(CO)2Fe{μ-CH2CH(CH2)3}W(CO)3Cp]BPh4

The reaction of [Cp^∗(CO)₂Fe{μ-CH₂CH(CH₂)₃}W(CO)₃Cp]PF₆ with NaBPh₄ in dry acetone gave [Cp^∗(CO)₂Fe{μ-CH₂CH(CH₂)₃}W(CO)₃Cp]BPh₄. The bond Fe-C_β is shorter than that reported for the shorter chain carbocationic complexes. The data suggest that metallacyclopropane character is on the iron side of the molecule both in the solid state and in solution.     

Dynamic properties of the fluxional Rh2H(μ-PPh2)2(PPh3)3 complex

The rhodium dimer [Rh₂H(PPh₂)₂(PPh₃)₃]⁻ was prepared from RhCl(PPh₃)₃ and K₄Sn₉ in the presence of 2,2,2-cryptand in ethylenediamine/toluene solvent mixtures. The [K(2,2,2-crypt)]⁺ salt was isolated and characterized via NMR and X-ray diffraction studies. The solid state structure reveals a binuclear, diphenylphosphido-bridged, 32 electron Rh(I)-Rh(I) complex with edge-shared tetrahedral and square planar Rh centers with overall C_s point symmetry. 1-D and 2-D ¹H, ³¹P, and ³¹P{¹H} NMR experiments were used to characterize the complex.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Mono- and binuclear copper(II) complexes containing di(2-pyridyl)sulfide (DPS) as chelating ligand: Spectroscopic characterization and crystal structures of [Cu(DPS)(H2O)Cl2] · H2O and [{Cu(DPS)Cl}2μ-(Cl)2]

The complexes [Cu(DPS)(H₂O)Cl₂] · H₂O (1a) and [{Cu(DPS)Cl}₂μ-(Cl)₂] (1b) where DPS = Di(2-pyridyl)sulfide have been synthesized and characterized using elemental analysis, thermal analysis (TG/DSC), vibrational and electronic spectroscopies as well as electron paramagnetic resonance (EPR). Additionally, the crystal and molecular structures of both compounds have been determined by X-ray diffraction techniques.     

Unexpected magnetic topology in the heterobimetallic [ReBr4(μ-ox)Cu(bpy)2] compound

A novel oxalato-bridged rhenium(IV)-copper(II) compound, namely [Re^IVBr₄(μ-ox)Cu^II(bpy)₂] (1), has been obtained by reacting (PPh₄)₂[ReBr₄(ox)] with Cu(CF₃SO₃)₂ and 2,2′-bpy in CH₃CN, and its crystal structure determined by single-crystal X-ray diffraction. Intermolecular Br?Br interactions and nonbonding Cu?Br type contacts between the heterobimetallic dinuclear units lead to a two-dimensional supramolecular structure. Compound 1 behaves magnetically as a [Re^IVCu^II]₂ tetranuclear species with weak antiferromagnetic interactions through the oxalato bridge and intermolecular Br?Br contacts.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Chalcogenolato-bridged cyclometallated binuclear palladium complexes: Synthesis, spectroscopy, structures of [Pd2(μ-Cl)(μ-SMes)(C10H6NMe2-C,N)2] and [Pd2(μ-SePh)2(C10H6NMe2-C,N)2]

Reactions of orthometallated binuclear palladium complexes with NaER, obtained by NaBH₄ reduction of R₂E₂ in methanol, gave complexes, [Pd₂(μ-ER)₂(C^∩Y)₂] (HC^∩Y = N,N-dimethylbenzylamine (C₆H₅CH₂NMe₂), N,N-dimethylnaphthylamine (C₁₀H₇NMe₂), tri-o-tolylphosphine {P(tol-o)₃}; ER=SePh, SeMes, TePh, TeMes (Mes = 2,4,6-Me₃C₆H₂). Similar reactions of [Pd₂(μ-Cl)₂(C₁₀H₆NMe₂-C,N)₂] with Pb(SMes)₂ or MesSH in the presence of NaHCO₃ gave chloro/thiolato-bridged complex [Pd₂(μ-Cl)(μ-SMes)(C₁₀H₆NMe₂-C,N)₂]. The newly synthesized complexes were characterized by elemental analysis, UV-Vis, IR, NMR (¹H, ¹³C, ³¹P, ⁷⁷Se, ¹²⁵Te) spectroscopy. These complexes crystallized out preferentially in sym-cis configuration. A low energy charge transfer transition has been identified from chalcogenolate centers to an emptyπ^∗ orbital of cyclometallated ligand in absorption spectroscopy in these complexes. The structures of [Pd₂(μ-Cl)(μ-SMes)(C₁₀H₆NMe₂-C,N)₂] (1) and [Pd₂(μ-SePh)₂(C₁₀H₆NMe₂-C,N) ₂] (3) have been established by single crystal X-ray diffraction analyses. In the former, the two palladium atoms are held together by chloro and thiolato bridges whereas in the latter, the two phenylselenolato ligands bridge two palladium atoms. The pyrolysis of [Pd(μ-TeMes)(C₁₀H₆NMe₂-C,N)]₂ (10) in a furnace gave Pd₇Te₃ whereas thermolysis in TOPO afforded primarily PdTe₂.     

Thiolato-bridged “Linear” trinuclear platinum complexes [Pt3(μ-SR)4(dppm)2]

Thiolato-bridged tri- and dinuclear platinum complexes of the types [Pt₃(μ-SR)₄(dppm)₂]²⁺ (1) and [Pt₂(μ-ER)₂(dppm)₂]²⁺ (2) (E=S or Se; R=alkyl or aryl; dppm=bis(diphenylphosphino)methane) have been prepared using the mononuclear precursors [Pt(ER)₂(dppm)]. The complexes have been characterized by NMR (¹H, ¹³C, ³¹P, ¹⁹⁵Pt), FT-IR and FAB mass spectral data. The structure of [Pt₃(μ-SC₆H₄CH₃-4)₄(dppm)₂][CF₃SO₃]₂ · 6CH₂Cl₂ (1d), has been established through X-ray crystallography, revealing a zig-zag arrangement of the three coordination spheres around the platinum atoms.     

Syntheses and crystal structures of the first iridium complexes with m- and p-terphenyl (tp). {[Ir2(p-tp)(cod)2](BF4)2 · 2CH2Cl2}3 and [Ir(m-tp)(η-C5Me5)](BF4)2

Novel two iridium terphenyl complexes were prepared and their structures were characterized crystallographically. The reaction of [Ir(cod)₂]BF₄ with p-terphenyl (p-tp) in CH₂Cl₂ was carried out to afford dinuclear Ir(I) complex {[Ir₂(p-tp)(cod)₂](BF₄)₂ · 2CH₂Cl₂}₃ (cod=1,5-cyclooctadiene) (1 · 2CH₂Cl₂), whereas the reaction of the intermediate [Ir(η⁵-C₅Me₅)(Me₂CO)₃]³⁺ in Me₂CO with m-terphenyl (m-tp) was done to provide mononuclear Ir(III) complex [Ir(m-tp)(η⁵-C₅Me₅)](BF₄)₂ (2). In complex 1 · 2CH₂Cl₂, two Ir atoms are η⁶-coordinated to both sides of terminal benzene rings from the upper and lower sides in the p-tp ligand, while one Ir atom is η⁶-coordinated to one side of the terminal benzene ring in the m-tp ligand in complex 2. Each crystal structure describes the first coordination mode found in metal complexes with the m- and p-tp ligands.     

On the solvatochromic properties of the oxalate-bridged complexes [(BuCO2)3M2]2(μ-O2C2O2) where M = Mo or W

The room temperature electronic absorption spectra of the oxalate bridged MM quadruply bonded complexes [(^tBuCO₂)₃M₂]₂(μ-O₂C₂O₂), where M = Mo or W have been recorded in H₂O, THF:H₂O mixtures, THF, CH₂Cl₂, toluene, DMSO, aniline, toluene saturated with N,N-dimethylaniline and ethanol. The strong absorptions in the visible region of the electronic absorption spectra assignable to the metal-to-ligand (bridge) charge transfer are shown to be highly solvent dependent. Those samples prepared in H₂O, CH₂Cl₂ and toluene are shown to comprise of a suspension of microcrystalline particles ranging in size from 100 nm to 5 μm. Individual particles were found by scanning electron microscopy to have an aspect ratio of ∼10:1, all being needle shaped. The spectra in THF, EtOH, aniline, DMSO and toluene-N,N-dimethylaniline all show similar vibronic progressions and are attributed to discrete solvated molecular species. The spectra recorded in aniline are notably red-shifted which is proposed to arise from a combination of hydrogen bonding and Lewis base stabilization of the photoexcited state.     

Further studies on the coordination chemistry of [Pt2(μ-S)2(PPh3)4] towards indium(III) substrates

The reactivity of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards a variety of indium(III) substrates has been explored. Reaction with excess In(NO₃)₃ and halide (KBr or NaI) gave the four-coordinate adducts [Pt₂(μ-S)₂(PPh₃)₄InX₂]⁺[InX₄]⁻ (X = Br, I). An X-ray structure determination on the iodo complex revealed a slightly distorted tetrahedral coordination geometry at indium. In contrast, reaction of [Pt₂(μ-S)₂(PPh₃)₄] with indium(III) chloride was more complex; the ion [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺ was initially observed in solution (using ESI mass spectrometry), and isolated as its BPh₄⁻ salt. Analysis of [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺[BPh₄]⁻ by ESI MS showed the parent cation when analysed in MeCN solution. However in solutions containing methanol, partial solvolysis occurred to give the di-indium species [{Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)}₂]²⁺ (proposed to contain an In₂(μ-OMe)₂ unit with five-coordinate indium) and its fragment ion [Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)]⁺. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with InCl₃·3H₂O, 8-hydroxyquinoline (HQ) and trimethylamine in methanol gave the adduct [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, isolated as its PF₆⁻ salt. The same cationic complex is formed when [Pt₂(μ-S)₂(PPh₃)₄] is reacted with InQ₃ in methanol, but in this case the product is contaminated with the mononuclear complex [(Ph₃P)₂PtQ]⁺ formed by disintegration of the trinuclear complex [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺ with byproduct Q⁻. [(Ph₃P)₂PtQ]⁺BPh₄⁻ was independently prepared from cis-[PtCl₂(PPh₃)₂] and HQ/Me₃N, and is the first example of a platinum 8-hydroxyquinolinate complex containing phosphine ligands.     

The azidopentacyanoferrate(III) ion as a tecton in constructing heterometallic complexes: Synthesis, crystal structure and magnetic properties of [Mn(valphen)(H2O)2]2[(H2O)(valphen)Mn(μ-CN)Fe(CN)4(N3)]·8H2O

By employing the common precursor Na₃[Fe(CN)₅(NH₃)]·3H₂O in a new synthetic approach, the azidopentacyanoferrate(III) ion has been isolated and structurally characterized as (Ph₄As)₂[Na(H₂O)₄][Fe(CN)₅(N₃)] 1. In order to confirm its building block ability, compound 1 has been reacted with the mononuclear complex [Mn(valphen)(H₂O)₂]ClO₄ (H₂valphen represents the Schiff base resulting from the condensation of o-vanillin with 1,2-phenylenediamine in a 2:1 M ratio) to afford the new Mn^III-Fe^III heterometallic system [Mn(valphen)(H₂O)₂]₂[(H₂O)(valphen)Mn(μ-CN)Fe(CN)₄(N₃)]·8H₂O 2. The crystal structure of compound 2 reveals a supramolecular assembly generated by [(H₂O)(valphen)Mn(μ-CN)Fe(CN)₄(N₃)]²⁻ dianions and discrete [Mn(valphen)(H₂O)₂]⁺ counterions. The dynamic magnetic measurements of compound 2 point to a slow relaxation of the magnetization.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Chalcogenide-capped triruthenium clusters: X-ray structures of [Ru3(CO)6(μ3-CO){P(C4H3S)3}(μ-dppm)(μ3-O)] and [(μ-H)2Ru3(CO)6{P(C4H3S)3}(μ-dppm)(μ3-S)]

Treatment of [Ru₃(CO)₉{P(C₄H₃S)₃}(μ-dppm)] (1) [dppm = bis(diphenylphosphino)methane] with molecular oxygen in benzene at 60 °C affords oxo-capped [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-O)] (2), while with elemental sulfur and selenium related chalcogenide-capped clusters [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-E)] (3, E = S; 5, E = Se) and bis(chalcogenide) clusters [Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-E)₂] (4, E = S; 6, E = Se) result. Reaction of 1 with H₂S in refluxing THF affords the previously reported [(μ-H)₂Ru₃(CO)₇(μ-dppm)(μ₃-S)] (7) together with the new sulfido-capped dihydride [(μ-H)₂Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-S)] (8). All new compounds have been characterized by spectroscopic data, and 2 and 8 by single-crystal X-ray diffraction analyses. Oxo-capped 2 consists of a triangular ruthenium framework capped on opposite sides by oxo and carbonyl groups, while 8 consists of a ruthenium triangle by a capping sulfido ligand and two inequivalent bridging hydride ligands.     

Octahedral (cyclopentadienyl)rhodium clusters [Rh6Cp6(μ6-C)] and [Rh6Cp6(μ3-CO)2]: Synthesis, structures and electrochemistry

The 86-electron dicationic octahedral rhodium clusters containing Cp (Cp = C₅H₅) ligands and either an interstitial carbon atom, [Rh₆Cp₆(μ₆-C)]²⁺ ([1]²⁺), or two carbonyl groups, [Rh₆Cp₆(μ₃-CO)₂]²⁺ ([2]²⁺), were synthesized in low yields by reactions of Rh₃Cp₃(μ-CO)₃ with RhCp(C₂H₄)₂ or [RuCp^∗(MeCN)₃]⁺ (Cp^∗ = C₅Me₅), respectively. The structures of [1]²⁺ and [2]²⁺ were determined by X-ray diffraction. Their electrochemical behavior proved that they possess a rather extended electron transfer activity. In accordance with DFT calculations, the nearly octahedral structure of [1]²⁺ and [2]²⁺ is retained both upon oxidation (2+/3+) and the first reduction (2+/+); however, the second reduction (+/0) results in the breaking of one (for [1]⁰) or two (for [2]⁰) Rh-Rh bonds. In the case of the related Dahl’s nickel cluster Ni₆Cp₆ the nearly octahedral structure is retained upon all redox steps (3+/2+/+/0/−/2−).     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Synthesis,structure and magnetic properties of the binuclear chromium(III) complex di-μ-hydroxobis [(1,4,7,10-tetraazacyclododecane)chromium(III)] dithionate tetrahydrate, [(cyclen)CrOH]2(S206)2·4H2O

The dark blue dimeric complex di-μ-hydroxo- bis [(1,4,7,10-tetraazacyclododecane)chromium(III)] dithionate tetrahydrate, [Cr(C₈H₂₀N₄)OH]₂(S₂O₆)₂· 4H₂O or [Cr(cyclen)OH]₂(S₂O₆)₂·4H₂O, has been synthesized. The crystal structure of the complex has been determined from threeodimensional counter X-ray data. The complex crystallizes in space group P2₁/n of the monoclinic system with two dimeric formula units in a cell of dimensions a = 8.837(5), b = 14.472(8), c= 13.943(6) Å andβ=95.83(4)^o. The structure has been refined by full-matrix least- squares methods to a final value of the weighted R-factor of 0.059 on the basis of 1774 independent intensities. The geometry of the cyclen macrocycle is unsymmetrical, the observed conformations being λδδλ and its enantiomer. The strained ligand conformation leads to significant deviations from octahedral geometry at the chromium centers, and to a bridged geometry in which the CrOCr angle ø and the Cr···Cr separation of 104.1(1)^o and 3.086(2) Å are the largest observed in dimers of this kind. The magnetic susceptibility of the complex indicates antiferromagnetic coupling, with the ground state singlet lying 21.56(6) cm⁻¹ below the lowest lying triplet state. The structural parameters have been used to calculate the triplet energy by means of the Glerup- Hodgson- Pedersen (GHP) model, and the calculated value of 22.3 cme⁻¹ is very similar to the observed value.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

Synthesis and characterisation of adducts of [Pt2(μ-S)2(PPh3)4] with organo-palladium and platinum-hydride substrates

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of palladium(II) complexes containing organometallic ligands (cyclopalladated N-donor ligands, η³-allyl, phenyl) have been explored, leading to the formation of a series of cationic, trinuclear sulfido-bridged aggregates containing {Pt₂PdS₂} cores. [Pt₂(μ-S)₂(PPh₃)₄] also reacts with the platinum(II) hydride complex trans-[PtHCl(PPh₃)₂] giving the adduct [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]⁺. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄PdPh(PPh₃)]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]PF₆ are reported, and show the expected bis μ₃-sulfido aggregates with three square-planar metal centres.