Factors determining the frequency of plasmid cointegrate formation mediated by insertion sequence IS3 from Escherichia coli.

Summary Transposition events mediated by plasmid-borne copies of the insertion sequence IS3 of Escherichia coli are difficult to detect because of a low frequency of cointegrate formation. We found that cointegration activity could be strongly enhanced by using plasmid constructions in which a second IS3 element, disabled by a large deletion, was placed adjacent to an intact IS3 copy. Attempts to construct plasmids containing two adjacent intact IS3 copies were unsuccessful, probably because of instability. Transpositional hyperactivity of tandemly duplicated IS sequences was previously described for spontaneous duplications of IS21 and IS30 and may well be a more general phenomenon. The frequency of cointegration events was also strongly increased in an E. coli strain deficient in Dam methylation, suggesting that IS3, like some other Dam site-containing IS elements, is regulated by the Dam methylation system. Insertion sites were strongly clustered within the target lambda repressor gene; however no sequence specificity determinants could be identified. All insertions analyzed carried the IS element in the same orientation; target sequence duplications were mostly 3 bp, but in some cases 4 by long. To obtain information about the roles of the open reading frames (ORFs) in IS3, we constructed plasmid-borne mutant elements in which potentially functional reading frames were inactivated by site-directed mutations; the mutants were introduced into partial tandem constructions and tested in cointegration assays. Mutations inactivating the putative initiation codons of ORF I and 11 in the intact element reduced insertion activity to less than 4% of the wild type, whereas the introduction of a termination codon into ORF IV had no effect on cointegration frequency. We conclude that translation of ORFs I and II is essential for cointegration activity and that the mutagenized ATG codons most probably serve as the normal initiation codons in the wild-type element. In contrast, ORF IV could either be non-functional or its gene product could be supplied in trans from chromosomal elements.     

ISDra2 transposition in Deinococcus radiodurans is downregulated by TnpB

Transposable elements belonging to the recently identified IS200/IS605 family radically differ from classical insertion sequences in their transposition mechanism by strictly requiring single‐stranded DNA substrates. This IS family includes elements encoding only the transposase (TnpA), and others, like ISDra2 from Deinococcus radiodurans, which contain a second gene, tnpB, dispensable for transposition and of unknown function to date. Here, we show that TnpB has an inhibitory effect on the excision and insertion steps of ISDra2 transposition. This inhibitory action of TnpB was maintained when ISDra2 transposition was induced by γ‐irradiation of the host cells and required the integrity of its putative zinc finger motif. We also demonstrate the negative role of TnpB when ISDra2 transposition was monitored in a heterologous Escherichia coli host, indicating that TnpB‐mediated inhibition does not involve Deinococcus‐specific factors. TnpB therefore appears to play a regulatory role in ISDra2 transposition.     

IS200: a Salmonella-specific insertion sequence

A new IS element (IS200) has been identified in Salmonella. The sequence was identified as an IS element by the following criteria: its insertion caused the mutation hisD984; six copies of the sequence are present in strain LT2 of S. typhimurium; and transposition of the sequence has been observed on several occasions. IS200 is found in almost all Salmonella species examined but is absent from most other enteric bacteria. The specificity of this element for Salmonella (and the absence of IS1-IS4 from Salmonella) suggest that transfer of insertion sequences between bacterial groups may be less extensive than is commonly believed. Alternatively, the distribution may suggest that these elements play a selectively important role in bacteria.     

Second-element turn-on of gene expression in an IS1 insertion mutant

Summary To learn more about the ways in which genes silenced by insertion mutations can be reactivated, we have undertaken a systematic investigation of Gal⁺ revertants of the polar mutant galOP-306::IS1 in Escherichia coli K12. The selective conditions used excluded reversion to wild type by precise excision of IS1. In this system (which resisded on a multi-copy plasmid) reversion to the Gal⁺ phenotype occurred with a frequency of about 10^-7 per cell and per generation. Analysis of the revertants revealed that — with the single exception of the previously published chromosomal mutant sis1 — alterations in the structure of IS1 lead to reactivation of gal operon expression. These events fall into four classes: (I) insertion of IS2 at position 327 in IS1, insertion of IS2 at position 687 in IS1, (III) insertion of a hitherto undetected mobile element, IS150, at position 387, (IV) a 16-bp deletion encompassing IS1 coordinates 553–568. Of some 200 independent reversion events studied, all but one were of types I–III i.e. they involved the intervention of a second mobile element.     

Insertion Sequence-Driven Evolution of <Emphasis Type="Italic">Escherichia coli</Emphasis> in Chemostats

Insertion sequence (IS) elements are present in almost all bacterial genomes and are mobile enough to provide genomic tools to differentiate closely related isolates. They can be used to estimate genetic diversity and identify fitness-enhancing mutations during evolution experiments. Here, we determined the genomic distribution of eight IS elements in 120 genomes sampled from Escherichia coli populations that evolved in glucose- and phosphate-limited chemostats by comparison to the ancestral pattern. No significant differential transposition of the various IS types was detected across the environments. The phylogenies revealed substantial diversity amongst clones sampled from each chemostat, consistent with the phenotypic diversity within populations. Two IS-related changes were common to independent chemostats, suggesting parallel evolution. One of them corresponded to insertions of IS1 elements within rpoS encoding the master regulator of stress conditions. The other parallel event was an IS5-dependent deletion including mutY involved in DNA repair, thereby providing the molecular mechanism of generation of mutator clones in these evolving populations. These deletions occurred in different co-existing genotypes within single populations and were of various sizes. Moreover, differential locations of IS elements combined with their transpositional activity provided evolved clones with different phenotypic landscapes. Therefore, IS elements strongly influenced the evolutionary processes in continuous E. coli cultures by providing a way to modify both the global regulatory network and the mutation rates of evolving cells.     

Isolation and Characterization of IS1416fromPseudomonas glumae,a New Member of the IS3Family

Isolation and characterization of four different insertion sequence (IS) elements fromPseudomonas glumaeMAFF 302744 through transposition into the entrapment vector pSHI1063 are described. One of the elements, IS1416,was further characterized. IS1416is 1322 bp long and carries 29-bp terminal inverted repeats flanked by a 3-bp direct duplication. IS1416contains three open reading frames (ORFs), which are designated ORFA1, ORFA2, and ORFB, on one strand. Both DNA sequence of IS1416and the deduced amino acid sequences of its ORFs strongly suggest that IS1416is a member of the IS3family, and is closely related to IS401fromPseudomonas cepaciaand IS51fromPseudomonas syringae.To our knowledge, IS1416is the first IS element isolated fromP. glumae.The gene organization and possible regulation of transposition functions of IS1416are also discussed.     

Insertion sequence-caused large-scale rearrangements in the genome of Escherichia coli

A majority of large-scale bacterial genome rearrangements involve mobile genetic elements such as insertion sequence (IS) elements. Here we report novel insertions and excisions of IS elements and recombination between homologous IS elements identified in a large collection of Escherichia coli mutation accumulation lines by analysis of whole genome shotgun sequencing data. Based on 857 identified events (758 IS insertions, 98 recombinations and 1 excision), we estimate that the rate of IS insertion is 3.5 × 10⁻⁴ insertions per genome per generation and the rate of IS homologous recombination is 4.5 × 10⁻⁵ recombinations per genome per generation. These events are mostly contributed by the IS elements IS1, IS2, IS5 and IS186. Spatial analysis of new insertions suggest that transposition is biased to proximal insertions, and the length spectrum of IS-caused deletions is largely explained by local hopping. For any of the ISs studied there is no region of the circular genome that is favored or disfavored for new insertions but there are notable hotspots for deletions. Some elements have preferences for non-coding sequence or for the beginning and end of coding regions, largely explained by target site motifs. Interestingly, transposition and deletion rates remain constant across the wild-type and 12 mutant E. coli lines, each deficient in a distinct DNA repair pathway. Finally, we characterized the target sites of four IS families, confirming previous results and characterizing a highly specific pattern at IS186 target-sites, 5′-GGGG(N6/N7)CCCC-3′. We also detected 48 long deletions not involving IS elements.     

Identification and characterization of IS 1138, a transposable element from Mycoplasma pulmonis that belongs to the IS3 family

Insertion sequence (IS) elements are mobile genetic elements found in prokaryotes. We have identified a repetitive element from Mycoplasma pulmonis, a murine pathogen, that is similar to eubacterial IS elements. By subcloning a single strain of M. pulmonis, we isolated a variant clone in which the IS element had undergone an apparent transposition event. The nucleotide sequences of the element, designated IS 1138, and the target site into which it inserted were determined. IS1138 consists of 1288bp with 18bp perfect terminal inverted repeats. Sequence analysis of the target site before and after insertion of IS1138 identified a 3bp duplication of target DNA flanking the element. The predicted amino acids encoded by the major open reading frame of IS 1138 share significant similarity with the transposases of the IS3 family. Southern hybridization analysis indicates that repetitive sequences similar to IS 1138 are present in most, if not all, strains of M. pulmonis, but Is1138–like sequences were not detected in other mycoplasmal species.     

Cloning with Mu d -P22 hybrid prophages: mapping of IS 200 elements on the chromosome of Salmonella typhimurium LT2

Specific DNA fragments from the chromosome of Salmonella typhimurium LT2 were packaged in P22 capsids by induction of “locked-in” Mud-P22 hybrid prophages. High yields of the packaged DNA were obtained upon capsid disruption. DNA hybridization using a fragment of insertion sequence IS200 as probe permitted physical mapping of IS200 elements on the chromosome of S. typhimurium LT2 within ±1 centisome (CS). IS200 copies were found at the following locations: CS 24 (copy VI), CS 53 (copy V), CS 63 (copy I), CS 80 (copy II) and CS 93 (copy III). Copy IV, previously mapped near fliA (CS 42), was not included in our study. Received: 28 May 1997 / Accepted: 11 August 1997     

The effects of traT insertion mutations on detergent sensitivity and serum resistance of Escherichia coli and Salmonella typhimurium

The SS-A mutation of Salmonella typhimurium, which probably causes the production of a mutated TraT-like protein, sensitizes the bacteria to hydrophobic antibiotics. A similar phenotype is caused by insertion mutations in the cloned traT gene of R6-5. While the SS-A mutants are resistant to detergents and have unaltered serum resistance, the insertion mutations sensitize both S. typhimurium and Escherichia coli to detergents and abolish the increase in serum resistance caused by the wild-type traT gene product in E. coli.     

ISLpl1 Is a Functional IS30-Related Insertion Element in Lactobacillus plantarum That Is Also Found in Other Lactic Acid Bacteria

We describe the first functional insertion sequence (IS) element in Lactobacillus plantarum. ISLpl1, an IS30-related element, was found on the pLp3 plasmid in strain FB335. By selection of spontaneous mutants able to grow in the presence of uracil, it was demonstrated that the IS had transposed into the uracil phosphoribosyltransferase-encoding gene upp on the FB335 chromosome. The plasmid-carried IS element was also sequenced, and a second potential IS element was found: ISLpl2, an IS150-related element adjacent to ISLpl1. When Southern hybridization was used, the copy number and genome (plasmid versus chromosome) distribution data revealed different numbers and patterns of ISLpl1-related sequences in different L. plantarum strains as well as in Pediococcus strains. The ISLpl1 pattern changed over many generations of the strain L. plantarum NCIMB 1406. This finding strongly supports our hypothesis that ISLpl1 is a mobile element in L. plantarum. Database analysis revealed five quasi-identical ISLpl1 elements in Lactobacillus, Pediococcus, and Oenococcus strains. Three of these elements may be cryptic IS, since point mutations or 1-nucleotide deletions were found in their transposase-encoding genes. In some cases, ISLpl1 was linked to genes involved in cold shock adaptation, bacteriocin production, sugar utilization, or antibiotic resistance. ISLpl1 is transferred among lactic acid bacteria (LAB) and may play a role in LAB genome plasticity and adaptation to their environment.     

Unexpectedly rapid IS1 transposition into an Arabidopsis chromatin remodeling gene

Common cloning is often associated with instability of certain classes of DNA. Here we report on IS1 transposition as possible source of such instability. During the cloning of Arabidopsis thaliana gene into commercially available vector maintained in widely used Escherichia coli host the insertion of complete IS1 element into the intron of cloned gene was found. The transposition of the IS1 element was remarkably rapid and is likely to be sequence-specific. The use of E. coli strains that lower the copy number of vector or avoiding the presence of the problematic sequence is a solution to the inadvertent transposition of IS1. The transposition of IS1 is rare but it can occur and might confound functional studies of a plant gene.     

High-Temperature-Induced Transposition of Insertion Elements in Burkholderia multivorans ATCC 17616

An efficient and quantitative method to analyze the transposition of various insertion sequence (IS) elements in Burkholderia multivorans ATCC 17616 was devised. pGEN500, a plasmid carrying a Bacillus subtilis-derived sacB gene, was introduced into ATCC 17616 cells, and 25% of their sucrose-resistant derivatives were found to carry various IS elements on pGEN500. A PCR-based experimental protocol, in which a mixture of several specific primer pairs was used, revealed that pGEN500 captured, in addition to five previously reported IS elements (IS401, IS402, IS406, IS407, and IS408), three novel IS elements, ISBmu1, ISBmu2, and ISBmu3. The global transposition frequency of these IS elements was enhanced more than sevenfold under a high-temperature condition (42°C) but not under oxidative stress or starvation conditions. To our knowledge, this is the first report demonstrating the elevated transposition activities of several IS elements at a high temperature. The efficient experimental protocol developed in this study will be useful in quantitatively and simultaneously investigating various IS elements, as well as in capturing novel functional mobile elements from a wide variety of bacteria.     

Evidence that Tn5565, which includes the enterotoxin gene in Clostridium perfringens, can have a circular form which may be a transposition intermediate

The Clostridium perfringens enterotoxin gene is on a transposon-like element, Tn5565, integrated in the chromosome in human food poisoning strains. The flanking IS elements, IS1470 A and B, are related to IS30. The IS element found in the transposon, IS1469, is related to IS200 and has been found upstream of cpe in all Type A strains. PCR and sequencing studies from cell extracts and plasmid isolations of C. perfringens indicate that Tn5565 can form a circular form with the tandem repeat (IS1470)₂, similar to the transposition intermediates described for a number of IS elements.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

Rates of transposition in Escherichia coli

The evolutionary role of transposable elements (TEs) is still highly controversial. Two key parameters, the transposition rate (u and w, for replicative and non-replicative transposition) and the excision rate (e) are fundamental to understanding their evolution and maintenance in populations. We have estimated u, w and e for six families of TEs (including eight members: IS1, IS2, IS3, IS4, IS5, IS30, IS150 and IS186) in Escherichia coli, using a mutation accumulation (MA) experiment. In this experiment, mutations accumulate essentially at the rate at which they appear, during a period of 80 500 (1610 generations × 50 lines) generations, and spontaneous transposition events can be detected. This differs from other experiments in which insertions accumulated under strong selective pressure or over a limited genomic target. We therefore provide new estimates for the spontaneous rates of transposition and excision in E. coli. We observed 25 transposition and three excision events in 50 MA lines, leading to overall rate estimates of u ∼ 1.15 × 10^–5, w ∼ 4 × 10⁻⁸ and e ∼ 1.08 × 10⁻⁶ (per element, per generation). Furthermore, extensive variation between elements was found, consistent with previous knowledge of the mechanisms and regulation of transposition for the different elements.     

The IS4 family of insertion sequences: evidence for a conserved transposase motif

The eight IS 231 variants characterized so far (IS 231 A-F, V and W) display similar transposases with an overall 40% identity. Comparison with all the proka-ryotic transposable elements sequenced so far revealed that the IS231 transposases share two conserved regions with those of 35 other insertion sequences of wide origins. These insertion sequences, defining the IS4 family, have a common bipartite organization of their ends and are divided into two similarity groups. Interestingly, the transposase domains conserved within this family display similarities with the well known integrase domain shared by transposases of the IS3 and IS15 families, and integrases of retroelements. This domain is also found in IS30- related elements and Tn7 TnsB protein. Amino acid residues conserved throughout all these prokaryotic and eukaryotic mobile genetic elements define a major transposase/integrase motif, likely to play an important role in the transposition process.     

IS4 is still found at its chromosomal site after transposition to galT

Summary IS4-DNA has been hybridized to separated DNA fragments of E. coli K12 strain M28 and to three mutants caused by transposition of IS4 to galT. The parental strain shows one band hybridizing to IS4 representing one copy of IS4 in the chromosome. The mutants have this copy retained and show in addition a second band corresponding to the IS4 copy in galT. The experiments support the hypothesis that transposition of IS4 is accompanied by replication of the element.     

The Sinorhizobium meliloti Insertion Sequence (IS) Element ISRm14 Is Related to a Previously Unrecognized IS Element Located Adjacent to the Escherichia coli Locus of Enterocyte Effacement (LEE) Pathogenicity Island

ISRm14 is 2695 basepairs (bp) in size and bordered by 22 bp imperfect inverted repeats (IRs). A 9-bp target sequence is duplicated upon ISRm14 transposition. The DNA strand that putatively encodes the transposase enzyme carries three open reading frames (ORFs) designated ORFs1 to 3, which specify putative proteins of 15.9 kDa, 13.1 kDa, and 61.1 kDa, respectively. According to its structural characteristics, ISRm14 belongs to the recently proposed IS66 family of IS elements. The ORFs1 to 3 encoded putative proteins displayed significant similarities to ORFs of the previously unrecognized IS element ISEc8, which is inserted adjacent to the locus of enterocyte effacement (LEE) pathogenicity island of Escherichia coli EDL933. Analyses of the distribution of ISRm14 in a natural S. meliloti population showed its widespread occurrence in 66% of the strains tested with a copy number ranging from 1 to 6. Received: 13 May 1999 / Accepted: 14 June 1999     

Oxygen-Insensitive Nitroreductases: Analysis of the Roles of nfsA and nfsB in Development of Resistance to 5-Nitrofuran Derivatives in Escherichia coli

Nitroheterocyclic and nitroaromatic compounds constitute an enormous range of chemicals whose potent biological activity has significant human health and environmental implications. The biological activity of nitro-substituted compounds is derived from reductive metabolism of the nitro moiety, a process catalyzed by a variety of nitroreductase activities. Resistance of bacteria to nitro-substituted compounds is believed to result primarily from mutations in genes encoding oxygen-insensitive nitroreductases. We have characterized the nfsA and nfsB genes of a large number of nitrofuran-resistant mutants of Escherichia coli and have correlated mutation with cell extract nitroreductase activity. Our studies demonstrate that first-step resistance to furazolidone or nitrofurazone results from an nfsA mutation, while the increased resistance associated with second-step mutants is a consequence of an nfsB mutation. Inferences made from mutation about the structure-function relationships of NfsA and NfsB are discussed, especially with regard to the identification of flavin mononucleotide binding sites. We show that expression of plasmid-carried nfsA and nfsB genes in resistant mutants restores sensitivity to nitrofurans. Among the 20 first-step and 53 second-step mutants isolated in this study, 65 and 49%, respectively, contained insertion sequence elements in nfsA and nfsB. IS1 integrated in both genes, while IS30 and IS186 were found only in nfsA and IS2 and IS5 were observed only in nfsB. Insertion hot spots for IS30 and IS186 are indicated in nfsA, and a hot spot for IS5 insertion is evident in nfsB. We discuss potential regional and sequence-specific determinants for insertion sequence element integration in nfsA and nfsB.