Complete amino acid sequence of flavocytochrome b2 from baker's yeast

Each subunit of baker's yeast flavocytochrome b2 can be selectively cleaved by proteases into two fragments, amino-terminal fragment alpha and carboxy-terminal fragment beta. The primary structure of the former has been reported before [Ghrir, B., Becam, A. M. & Lederer, F. (1984) Eur. J. Biochem. 139, 59-74]. The amino acid sequence of the 197-residue fragment beta has now been established. The fragment was cleaved with cyanogen bromide; the three peptides thus obtained were submitted to digestions with Staphylococcus aureus V8 protease, chymotrypsin and trypsin, sometimes after succinylation. The complete fragment was also submitted to tryptic cleavage after citraconylation. Peptides were separated by thin-layer finger-printing or high-pressure liquid chromatography. They were mostly sequenced in a liquid-phase sequenator. The 511-residue amino acid sequence of the mature protein is thus completely established. Secondary structure predictions indicate an alternation of helical and extended structure, with a higher percentage of the former. Comparisons with other flavoproteins do not detect any significant sequence similarity.     

Interaction of myosin subfragment 1 with Cibacron Blue F3GA

Cibacron Blue F3GA and its immobilized derivatives have been shown before to bind and inhibit nucleotide-dependent enzymes and, among them, myosin subfragment 1. Experiments have been carried out to examine the mechanism of the subfragment 1--dye interaction. Binding of subfragment 1 to immobilized dye (Affi-Gel Blue) does not involve the ATP binding site on myosin. Subfragment 1 hydrolyzes MgATP and CaATP while bound to the Affi-Gel Blue column. Inactivated subfragment 1, which contains [3H]ADP noncovalently trapped at the active site, binds and elutes from the Affi-Gel Blue column in the same manner as unmodified, active protein. Free Cibacron Blue inhibits the ATPase activity of subfragment 1. The inhibition is pH, salt, and time dependent. Complete inhibition correlates with the noncovalent binding of four to five dye molecules per mole of subfragment 1. Three to four of these dye molecules can be preferentially removed from subfragment 1 in the presence of 1 M KCl without relieving the inhibition. This inhibition, which can be traced to one dye molecule per subfragment 1, is reversible and is facilitated in the presence of MgADP and MgATP, suggesting that the dye does not bind at the active site of subfragment 1. Our observations are explained in terms of hydrophobic and electrostatic protein--dye interactions.     

Affinity partitioning of phosphofructokinase from baker's yeast using polymer-bound Cibacron blue F3G-A

1. Phosphofructokinase from baker's yeast is partitioned between the phases of an aqueous two-phase system, containing dextran (Mr = 500000) and poly(ethyleneglycol) (Mr = 6000), in favour of the dextran-rich phase. By covalent binding of the dye Cibacron blue F3G-A to poly(ethyleneglycol) the enzyme can be extracted to the phase rich in this polymer, i.e. affinity partitioning. 2. The affinity partitioning effect, measured as the logarithmic increase of the partition coefficient by introducing polymer-bound Cibacron blue, depends on several factors. The influence of dye-polymer concentration, polymer concentration, polymer molecular weight, kind of salt and salt concentration, pH and temperature has been studied. 3. The effect of ATP, ADP, AMP, ITP, fructose 1,6-bis-phosphate and fructose 6-phosphate show large differences in the binding strength of these substances to the Cibacron blue binding sites. AMP cannot compete with Cibacron blue while ATP is strongly competing. 4. The use of affinity partitioning for enzyme isolation and determination of ligand binding is discussed, as well as possible mechanisms concerning this type of liquid/liquid extraction.     

Interaction between transcobalamin II and immobilized Cibacron Blue F3GA

Human serum transcobalamin II (TC II), a vitamin B₁₂ (Cbl) transport protein, complexes with Cibacron Blue F3GA, a reactive blue dye which can bind to proteins that require nucleotides as cofactors. Apo-TC II and holo-TC II both bind, but intrinsic factor (IF) and R-type binders of Cbl do not. Other mammalian species TC II also complex with the dye. Greater than 87% of the applied TC II-CN-[⁵⁷Co]Cbl remains bound to the dye even at pH 4.0. At pH values below this, the CN-[⁵⁷Co]Cbl dissociates off TC II which remains bound to the dye. High salt concentrations will break the TC II-dye complex. Ionic forces were considered not to be involved since complexing also occurred at pH 9.0, 2.5 pH units above the isoelectric point of TC II. Failure to dissociate the TC II-dye complex with 50% glycerol makes hydrophobic interactions unlikely. In addition to the potential uses of TC II-Cibacron Blue F3GA complexes in a total scheme for protein purification, the possibility that TC II is a nucleotide-requiring protein should be explored.     

天花粉蛋白与CibacronBlueF_3GA结合特性的研究

 天花粉蛋白与ＣｉｂａｃｒｏｎＢｌｕｅＦ_３ＧＡ结合特性的研究何贤辉,柯一保,孙汛,聂慧玲（中国科学院上海细胞生物学研究所,上海２０００３１）天花粉蛋白（Ｔｒｉｃｈｏｓａｎｔｈｉｎ,简称ＴＣ８）是从葫芦科植物栝楼（Ｔｂｅｈｏｓａｎｔｈｅｓｋｉｒｉｌｏｗ?..     

Hazards in the use of Cibacron Blue F3GA in studies of proteins.

Cibacron Blue F3GA from several commercial sources is shown to be heterogeneous. This crude dye inactivates both phosphoglycerate kinase and isoleucyl-tRNA synthetase. Purification of Cibacron Blue F3GA to homogeneity results in a dramatic decrease in inactivation of these enzymes. The inactivation is shown to be due to covalent modification of phosphoglycerate kinase and probably isoleucyl-tRNA synthetase by a minor component present in crude Cibacron Blue F3GA.     

Adsorption of papain with Cibacron Blue F3GA carrying chitosan-coated nylon affinity membranes

Covalent coupling of chitosan (CS) to activated nylon membrane was performed after the reaction of the microporous nylon membrane with formaldehyde. Non-specific adsorption on the CS-coated nylon membrane decreased greatly, compared with plain nylon membrane. The dye Cibacron Blue F3GA (CB F3GA) as a ligand was then covalently immobilized on the CS-coated membranes. Physical properties of the composite membrane and its applications in affinity membrane chromatography were examined. The contents of CS and CB F3GA-attached membranes were 89.6 mg/g nylon membrane and 146.1 micromol/g nylon membrane, respectively. These CB F3GA-attached composite membranes were used in the papain adsorption studies. Higher papain adsorption capacity, up to 235.3mg/g affinity membrane, was obtained. The adsorption isotherm fitted the Freundlich model well. Significant amount of the adsorbed papain (about 94.3%) was eluted by 1.0M NaSCN at pH 9.0. Experiments on regeneration and dynamic adsorption were also performed. It appears that CB F3GA-CS nylon membranes can be applied for papain separation without causing any denaturation.     

Affinity adsorption of lysozyme on a macroligand prepared with Cibacron Blue 3GA attached to yeast cells

The objective of this study was the development of affinity adsorbent particles with the appropriate characteristics to be applied in protein purification using the affinity ultrafiltration method. To prepare affinity macroligands Cibacron Blue 3GA, as a ligand molecule, was immobilized by covalent bonding onto yeast cell walls, the support material or matrix. The maximum attachment of the ligand to the matrix was 212 μmol/g (ligand dry weight/yeast dry weight). Lysozyme was selected as the protein model for the adsorption studies. Its adsorption onto the matrix without ligand and matrix with attached ligand were investigated batch-wise. The adsorption equilibrium isotherms appeared to follow a typical Langmuir isotherm. The maximum adsorption capacity (q(m)) of the Cell-Cibacron macroligand for lysozyme was 110 mg/ml of wet macroligand. The adsorbent was also employed for the separation of lysozyme from hen egg white. High purity lysozyme was obtained.     

Cadmium removal from human plasma by Cibacron Blue F3GA and thionein incorporated into polymeric microspheres

Poly(2-hydroxyethylmethacrylate–ethyleneglycoldimethacrylate) [poly(HEMA–EGDMA)] microspheres carrying Cibacron Blue F3GA and/or thionein were prepared and used for the removal of cadmium ions Cd(II) from human plasma. The poly(HEMA–EGDMA) microspheres, in the size range of 150–200 μm in diameter, were produced by a modified suspension copolymerization of HEMA and EGDMA. The reactive triazinyl dye-ligand Cibacron Blue F3GA was then covalently incorporated into the microspheres. The maximum dye incorporation was 16.5 μmol/g. Then, thionein was bound onto the Cibacron Blue F3GA-incorporated microspheres under different conditions. The maximum amount of thionein bound was 14.3 mg/g. The maximum amounts of Cd(II) ions removed from human plasma by poly(HEMA–EGDMA)–Cibacron Blue F3GA and poly(HEMA–EGDMA)–Cibacron Blue F3GA–thionein were of 17.5 mg/g and 38.0 mg/g, respectively. Cd(II) ions could be repeatedly adsorbed and desorbed with both types of microspheres without significant loss in their adsorption capacity.     

Bilirubin removal from human plasma by Cibacron Blue F3GA using immobilized microporous affinity membranous capillary method

A novel affinity sorbent system for direct bilirubin removal from human plasma was developed. These new adsorbents comprise Cibacron Blue F3GA as the specific ligand, and microporous membranous poly(tetrafluoroethylene) capillary (modified by coating with a hydrophilic layer of poly(vinyl alcohol) after activation) as the carrier matrix. The affinity adsorbents carrying 126.5 micromol Cibacron Blue F3GA/g polymer was then used to remove bilirubin in a flow-injection system. Non-specific adsorption on the poly(vinyl alcohol) coated capillary remains low, and higher affinity adsorption capacity, of up to 76.2 mg/g polymer was obtained after dye immobilization. The bilirubin adsorption capacity of the affinity capillary decreased with increase in the recirculation rate of plasma. The adsorption capacity increased with increase the temperature while decreased with increase the ionic strength. The maximum adsorption was only observed in neutral solution (pH 6-7). The adsorption isotherm fitted the Langmuir model well. These new adsorbents have higher velocity of mass transfer, better adsorption capacity, less fouling, longer service life and good reusability. The results of blood tests suggested the dye affinity capillary has good blood compatibility.     

Bromopyruvate as an affinity label for baker's yeast flavocytochrome b2. Kinetic study of the inactivation reaction.

Bromopyruvate was shown to completely inactivate cytochrome b2 in a reaction that obeyed the kinetic criteria required for affinity labels: it inactivated flavocytochrome b2 according to saturation kinetics, and the inactivation reaction was competitively inhibited by the substrate or competitive inhibitors. Inactivation was irreversible. The behaviour of both forms of flavocytochrome b2 (lintact and proteolytically cleaved) was examined. It was found that the reduced cleaved enzyme was not inactivated by bromopyruvate; this phenomenon can probably be ascribed to a structural change undergone upon reduction. The value of the lactate dissociation constant of intact cytochrome b2 cytochrome b2 was determined in competition experiments with bromopyruvate. By comparison with the divergent published values for the Ks of the cleaved from, it appears that only those that differ from the Km by a factor of two or three are reasonable. This study opens the way for the identification of an active site residue and localization in the peptide chain of the bifunctional enzyme.     

Metal-ion-promoted binding of triazine dyes to proteins. The interaction of Cibacron Blue F3G-A with yeast hexokinase.

Bivalent metal ions, particularly Zn2+ and other members of the first-row transition series, promote irreversible inactivation of yeast hexokinase by Cibacron Blue F3G-A at a site competitive with both ATP and D-glucose. Difference spectroscopy indicates that the protein-dye dissociation constant is decreased from 250 micrometers in the absence of metal ions to less than 100 micrometers in the presence of appropriate concentrations of metal ions, with specificity displayed in the sequence of Zn2+ greater than Cu2+ greater than Ni2+ greater than Mn2+. Quantitative inactivation of yeast hexokinase leads to the incorporation of approx. 1 mol of Cibacron Blue F3G-A/mol of subunit of mol. wt. 51 000 in both the presence and the absence of metal ion. These results suggest the formation of a highly specific ternary complex involving enzyme, dye and metal ion at the active-site region of the enzyme, and correlate well with the known effects of metal ions in promoting the binding of hexokinase to immobilized Cibacron Blue F3G-A.     

Lipase purification by affinity precipitation with a thermo-responsive polymer immobilized Cibacron Blue F3GA ligand

A thermo-responsive polymer (P_NNB) was synthesized with lower critical solution temperature 27.5°C and over 95% recovery. The adsorption of porcine pancreatic lipase on Cibacron Blue F3GA-conjugated P_NNB (P_NNB-CB) closely followed the bi-Langmuir adsorption isotherm. The maximum adsorption capacity was found at pH 5.0, with a ligand density of 18.4 μmol/g polymers. The optimized eluent was a 0.01 M phosphate buffer solution at pH 8.0 containing 20% ethylene glycol. Six adsorptiondesorption recycles indicated excellent reusability of the affinity adsorbent. P_NNB-CB was applied to separate porcine pancreatic lipase from its crude material giving a lipase activity recovery of 81.6% with a 16-fold purification factor. Lipase could be purified to single-band purity, according to gel electrophoresis. The purification strategy is therefore feasible and efficient for purifying proteins of interest.     

Specific binding of Cibacron blue F3G-A to yeast phosphofructokinase.

The complex formation between the ATP-analogous reactive dye Cibacron blue F3G-A and yeast phosphofructokinase is accompanied by a red shift of the visible absorption spectrum. From the position of lambdamax of the dye-phosphofructokinase complex in the polarity scales obtained from model solvents it may be concluded that the chromophoric system is evidently located in a highly apolaric range of the enzyme protein. The spectrophotometric titration of yeast phosphofructokinase with Cibacron blue F3G-A yielded a sigmoidal binding curve, which can be described by the MONOD-WYMAN-CHANGEUX model.     

Sulfite binding to a flavodehydrogenase, cytochrome b2 from baker's yeast.

Baker's yeast L-lactate dehydrogenase (flavocytochrome b2) is a typical flavodehydrogenase, in that it accepts two electrons from the substrate but has a monoelectronic acceptor. Yet it forms a red semiquinone [Capeillère Blandin et al. Eur. J. Biochem. 54, 549--566 (1975)] and it is shown in this paper that it forms a reversible covalent complex with sulfite (Kd = 1.4 muM). This complex can be observed by difference spectroscopy and provides a convenient tool for visualizing the flavin chromophore, usually hidden behind the intense heme absorbance. A number of anions (D-lactate, oxalate and pyruvate) are inhibitors of the enzymatic reaction and induce spectral perturbations of the flavin spectrum. It is concluded that probably two positive charges exist at the active site: one which stabilizes the red semiquinone and one which attracts organic anions and sulfite. It is also concluded that the correlation between reactivity with sulfite and reactivity with oxygen among flavo-proteins may not be as general as previously proposed [Massey et al. J. Biol. Chem. 244, 3999--4006 (1969)].     

Immobilization of a thermostable α-amylase, Termamyl, onto nitrocellulose membrane by Cibacron Blue F3GA dye binding

Highly porous nitrocellulose membranes were prepared by a solvent casting technique for the first time to immobilize α-amylase. An affinity dye, namely Cibacron Blue F3GA (CB), was incorporated covalently within the structure. The nitrocellulose–CB derivatized membranes were used for the immobilization of a starch degrading enzyme, α-amylase. Optimum conditions of immobilization for highest apparent activity were determined as pH 6.0, temperature 50°C and initial enzyme concentration 0.317 KNU/l. Under these optimum conditions, maximum enzyme immobilization yield was around 21% of the initial amount of the enzyme in the solution. Performance of free and immobilized enzymes at the same amount was compared for repeated runs. Up to the third use, immobilized enzyme showed higher activity than that of free enzyme mainly due to higher enzyme concentration in the membrane structure, then the apparent activity decreased gradually. However, when regenerated by switching pH to cause contraction/expansion of the structure, the membrane showed the highest activity, almost 2.5 times than that of the free enzyme. This unusual feature along with inexpensive cost may well make the nitrocellulose membrane an economical material for industrial application in glucose syrup production.     

Accessibility and multivalency of immobilized Cibacron blue F3GA

The effect of immobilized dye concentration on protein complexation was observed using zonal chromatography. A monomeric protein, octopine dehydrogenase, was retained by a single interaction to a Sepharose CL-6B column containing 11.6 mM immobilized Cibacron blue F3GA. By contrast, a tetrameric protein, lactate dehydrogenase, was retained by the same column by multiple interactions. The degree of multiple interactions was found to systematically increase with increasing immobilized dye concentration. The concentration of immobilized dye accessible to protein was found to be inversely related to the concentration of ionic components in the solvent. Zonal chromatographic measurements of free dye and unconjugated matrix suggest that increasing the concentration of ionic components promotes the adsorption of immobilized dye to the adjacent matrix surface. Such adsorption markedly affects both the capacity of an immobilized dye column and the multiplicity of its interaction with oligomeric proteins.     

Analytical evaluation of the purity of commercial preparations of Cibacron Blue F3GA and related dyes

The composition and purity of three commercial preparations of the widely used affinity chromatography ligand Cibacron Blue F3GA have been evaluated by TLC and by paired-ion reversed-phase HPLC and were found to contain several chromophoric species. Stepwise synthesis of the reported dye structure showed that only one commercial preparation contained any actual Cibacron Blue F3GA, and that it was present only in minor amounts. In all three preparations the major component appears to be the dichlorotriazinyl precursor of Cibacron Blue F3GA. Commercial samples of the related dyes Procion Blue MX-3G and Procion Blue MX-R are also highly heterogeneous. In addition, our experiments suggest that TLC results must be evaluated carefully to ensure that catalytic surface activity of alumina and silica has not created ghost bands.