Definition, Objectives, and Evaluation of Natural Attenuation

Natural attenuation offers large benefits to owners and managers of contaminated sites, but often raises strong objections from those who live and work near a site and are asked to assume most of the long-term risks. Part of the controversy comes about because published definitions of natural attenuation do not identify a realistic end-point objective, and they also are ambiguous about the naturally occurring processes that can achieve the objective. According to guidance from the U.S. National Research Council (NRC 2000), destruction and strong immobilization are the naturally occurring processes that achieve a realistic objective: containing the contaminant relatively nears its source, thereby minimizing exposure risks. The strategy for obtaining solid evidence that the objective is being achieved requires measurements that establish a cause-and-effect relationship between contaminant loss and a destruction or strong-immobilization reaction. The cause-and-effect relationship is best documented with reaction footprints, which typically are concentration changes in reactants or products of the destruction or immobilization reaction. MTBE presents a contemporary example in which footprint evidence for biodegradation is especially crucial, since aerobic biodegradation of MTBE requires special conditions not present at all sites: a high availability of dissolved oxygen and bacteria expressing particular oxygenase enzymes.     

Modeling natural attenuation of benzene with analytical and numerical models

Natural attenuation of benzene is a much-accepted technology for remediating low risk sites. To date, numerous protocols have been developed for assessing natural attenuation and measuring indicator parameters. Many models have additionally been developed to describe the advection, dispersion, sorption and biodegradation processes involved. It is evident that while there is extensive guidance in natural attenuation protocols for field sampling methodologies, less emphasis is placed on analyzing natural attenuation data for supporting appropriate model development. This paper presents methodologies for data analysis and interpretation that may be undertaken to achieve data reduction for modeling purposes. A case study is presented to illustrate the use of an analytical and a numerical natural attenuation model at the same site for predicting the time required to achieve the remedial goal at the site.This paper was originally intended for the Special Issue on Natural Attenuation Volume I published in Biodegradation 15(6), 2004.     

Modern geochemical and molecular tools for monitoring in-situ biodegradation of MTBE and TBA

Methyl tert-butyl ether (MTBE) is a major gasoline oxygenate worldwide and a widespread groundwater contaminant. Natural attenuation of MTBE is of practical interest as a cost effective and non-invasive approach to remediation of contaminated sites. The effectiveness of MTBE attenuation can be difficult to demonstrate without verification of the occurrence of in-situ biodegradation. The aim of this paper is to discuss the recent progress in assessing in-situ biodegradation. In particular, compound-specific isotope analysis (CSIA), molecular techniques based on nucleic acids analysis and in-situ application of stable isotope labels will be discussed. Additionally, attenuation of tert-butyl alcohol (TBA) is of particular interest, as this compound tends to occur alongside MTBE introduced from the gasoline or produced by (mainly anaerobic) biodegradation of MTBE.     

Rate of Natural Attenuation of Tert-Butyl Alcohol at a Chemical Plant

Tert-butyl alcohol (TBA) may be present in groundwater as an original component of leaked gasoline, or as a degradation product of methyl tert-butyl ether (MTBE). Evidence for natural attenuation of TBA in groundwater is presented from a chemical plant in Pasadena, Texas. Shallow groundwater in several areas of the plant has been affected by historic leaks and spills of TBA. A decade of regular groundwater monitoring of one groundwater plume, consisting primarily of TBA, shows generally declining concentrations and a plume area that is shrinking. Natural attenuation mechanisms are limiting the advective transport of TBA. The principal mechanism of attenuation in this case is probably biodegradation as the other physical components of natural attenuation (dilution, dispersion, diffusion, adsorption, chemical reactions, and volatilization) cannot explain the behavior of the plume over time. Biodegradation was also indicated by the enrichment of stable carbon isotope composition (¹³C/¹²C) of TBA along the flow path. Preliminary dissolved gas and electron acceptor analyses indicate the groundwater is at least under sulfate reducing condition in the core of the plume and the process responsible for biodegradation of TBA may include fermentation under aerobic (plume fringes) and possible anaerobic conditions. This case history demonstrates that natural attenuation of TBA is important, and can be used as a groundwater management tool at this site.     

A Field Application of Hydrogen-Releasing Compound (HRCTM) for the Enhanced Bioremediation of Methyl Tertiary Butyl Ether (MTBE)

Due to a greater understanding of the behavior of the fuel oxygenate Methyl Tertiary Butyl Ether (MTBE) in groundwater, the United States Environmental Protection Agency (EPA) and the American Petroleum Institute (API) recently have acknowledged the need for the development and application of additional remedial strategies to address the more extensive, longer lived, and faster moving dissolved MTBE plumes often associated with oxygenated fuel releases (API, 2000 and USEPA, 2000a). The need for alternative methods for managing dissolved MTBE plumes is particularly evident in the case of the Upper Glacial aquifer of Long Island, New York. Hydrogeologic conditions in the this water table aquifer (i. e., high hydraulic conductivity, high average pore velocities, low organic carbon, and high rates of recharge) have been found to contribute to the formation of extensive, long, narrow, and three-dimensional dissolved MTBE plumes that plunge into the aquifer in response to recharge (Weaver et. al. 1999). The characteristics of MTBE plumes in the Upper Glacial aquifer in combination with abundant sensitive receptors (mainly drinking water supply wells), often renders monitored natural attenuation (MNA) plume management strategies inappropriate, resulting in the need for plume control, frequently via pumping and treating (NYSDEC, 2000). In such cases, remedial costs can rise well beyond those associated with similar fuel releases that did not contain MTBE (USEPA, 1998a). Consequently, the application of remedial technologies for MTBE other than MNA, or pumping and treating, are of great interest to those responsible for the management of dissolved MTBE plumes on Long Island or in similar hydrogeologic settings. An alternative strategy for the remediation of dissolved MTBE plumes was recently field tested at an oxygenated fuel spill site on Long Island. The strategy was enhanced biodegradation via the application of Hydrogen Release Compound (HRC^TM). HRC^TM is a form of polylactate ester that slowly releases biodegradation stimulating constituents into the aquifer and has been shown in other studies to foster methanogenic conditions that advance the reductive dechlorina-tion of perchloroethene (PCE) and trichloroethene (TCE) (Koenigsberg, 1998). Numerous reports have been written that discuss the biodegradation of MTBE under aerobic conditions, as well as microcosm studies in which MTBE biodegradation was observed under anaerobic conditions. However, there are limited reports that document the natural anaerobic biodegradation of dissolved MTBE (McLoughlin, 2000). Despite the lack of documented natural anaerobic biodegradation of MTBE, it has been observed that MTBE transport often occurs under anoxic conditions at oxygenated fuel releases as the result of the biodegradation of other fuel constituents, such as benzene, toluene, ethylbenzene and xylene (BTEX), which deplete the available dissolved oxygen as well as other electron acceptors (nitrate, ferric iron, manganese, etc.) (USEPA, 2000c and API, 1996). Therefore, an anaerobic biodegradation strategy is attractive due to its synergy with the existing geochemical conditions. Consequently, the study was conceived and designed to test the ability of HRC(tm) to foster the anaerobic bio-degradation of MTBE under methano-genic conditions (McLoughlin, 2000). The application of HRC(tm) did result in the formation of a large area of enhanced reducing conditions in the vicinity and down gradient of the application zone. However, under these site conditions, the HRC(tm) application did not induce measurable methanogenic conditions with the associated elevated dissolved hydrogen concentrations required for significant MTBE anaerobic biodegradation. The high hydraulic conductivity and high average pore velocity at the site were likely responsible. Despite this, the study can be viewed as a success since much was learned that can be used in future studies of anaerobic biodegradation of MTBE and the application of HRC(tm).     

Review of MTBE Biodegradation and Bioremediation

Conclusive evidence of methyl tert-butyl ether (MTBE) biotransformation and complete mineralization under aerobic conditions in environmental samples and enrichment cultures is reviewed, in addition to increasing evidence of MTBE biotransformation under anaerobic conditions. The metabolic pathway of MTBE appears to have two key intermediates, tert-butyl alcohol (TBA) and 2-hydroxy isobutyric acid (HIBA). The first enzyme in MTBE biodegradation has been identified as either a cytochrome P450 or a nonhemic monooxygenase in different isolates. Mixed and pure cultures of microorganisms have utilized MTBE as a sole carbon and energy source. Cometabolism of MTBE with n-alkanes at rates of 3.9 to 52 nmol/min/mg protein has been documented. The presence of co-contaminants such as BTEX has either not affected or seemed to limit MTBE biodegradation. Some studies of MTBE natural attenuation have attributed mass loss to biodegradation, while others have attributed mass loss to dilution and dispersion. Recent advances in the assessment of MTBE biodegradation have indicated the potential for natural anaerobic transformation of MTBE. In situ bioremediation of MTBE has been enhanced by adding air or oxygen, or by adding microorganisms and air or oxygen. Bioreactors have attained significant removal of MTBE from MTBE-contaminated influent. Despite historical concerns about the biodegradability of MTBE, several biological methods can now be used for MTBE remediation.     

Review of MTBE Biodegradation and Bioremediation

Conclusive evidence of methyl tert-butyl ether (MTBE) biotransformation and complete mineralization under aerobic conditions in environmental samples and enrichment cultures is reviewed, in addition to increasing evidence of MTBE biotransformation under anaerobic conditions. The metabolic pathway of MTBE appears to have two key intermediates, tert-butyl alcohol (TBA) and 2-hydroxy isobutyric acid (HIBA). The first enzyme in MTBE biodegradation has been identified as either a cytochrome P450 or a nonhemic monooxygenase in different isolates. Mixed and pure cultures of microorganisms have utilized MTBE as a sole carbon and energy source. Cometabolism of MTBE with n-alkanes at rates of 3.9 to 52 nmol/min/mg protein has been documented. The presence of co-contaminants such as BTEX has either not affected or seemed to limit MTBE biodegradation. Some studies of MTBE natural attenuation have attributed mass loss to biodegradation, while others have attributed mass loss to dilution and dispersion. Recent advances in the assessment of MTBE biodegradation have indicated the potential for natural anaerobic transformation of MTBE. In situ bioremediation of MTBE has been enhanced by adding air or oxygen, or by adding microorganisms and air or oxygen. Bioreactors have attained significant removal of MTBE from MTBE-contaminated influent. Despite historical concerns about the biodegradability of MTBE, several biological methods can now be used for MTBE remediation.     

Temperature effect on tert-butyl alcohol (TBA) biodegradation kinetics in hyporheic zone soils

Background  

Remediation of tert-butyl alcohol (TBA) in subsurface waters should be taken into consideration at reformulated gasoline contaminated sites since it is a biodegradation intermediate of methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), and tert-butyl formate (TBF). The effect of temperature on TBA biodegradation has not been not been published in the literature.     

Challenges in Monitoring the Natural Attenuation of Spatially Variable Plumes

Monitored natural attenuation may be applied as a risk-based remediation strategy if it can be established that contaminants are or will be reduced to some acceptable level at or before a compliance point. Contaminant attenuation is often attributed to intrinsic biodegradation, which in some circumstances may occur only at the plume fringes where electron acceptors from the surrounding uncontaminated zones mix by dispersion and diffusion with the plume. However, due to the common spatial and temporal variability exhibited by many plumes, the centreline monitoring approaches advocated in many natural attenuation protocols may be unable to detect natural attenuation occurring primarily by fringe processes. Snapshot data from a multilevel sampling well transect across an MTBE plume at Vandenberg Air Force Base, CA, USA, illustrate the difficulty of centreline monitoring and the challenge of providing sufficient detail to detect attenuation processes that may be occurring primarily at plume fringes. In a study of a phenols plume in Wolverhampton, UK, high-resolution multilevel wells demonstrated that the key biodegradation processes were restricted spatially to the upper fringe of the plume and were rate-limited by transverse dispersion and diffusion of electron acceptors into the plume. Thus the overall extent of biodegradation was considerably less than suggested by a plume-scale analysis of total electron acceptor and contaminant budgets. These examples indicate that more robust and cost-effective MNA assessments can be obtained using monitoring strategies that focus on the location of key biodegradation processes.     

Bioremediation of MTBE: a review from a practical perspective

The addition of methyl tert-butyl ether (MTBE) to gasoline has resulted in public uncertainty regarding the continued reliance on biological processes for gasoline remediation. Despite this concern, researchers have shown that MTBE can be effectively degraded in the laboratory under aerobic conditions using pure and mixed cultures with half-lives ranging from 0.04 to 29 days. Ex-situ aerobic fixed-film and aerobic suspended growth bioreactor studies have demonstrated decreases in MTBE concentrations of 83% and 96% with hydraulic residence times of 0.3 hrs and 3 days, respectively. In microcosm and field studies, aerobic biodegradation half-lives range from 2 to 693 days. These half-lives have been shown to decrease with increasing dissolved oxygen concentrations and, in some cases, with the addition of exogenous MTBE-degraders. MTBE concentrations have also been observed to decrease under anaerobic conditions; however, these rates are not as well defined. Several detailed field case studies describing the use of ex-situ reactors, natural attenuation, and bioaugmentation are presented in this paper and demonstrate the potential for successful remediation of MTBE-contaminated aquifers. In conclusion, a substantial amount of literature is available which demonstratesthat the in-situ biodegradation of MTBE is contingent on achieving aerobic conditions in the contaminated aquifer.     

Natural Attenuation Rate Clarifications: The True Picture is in the Details

The term “Natural Attenuation” (NA) has been defined as naturally occurring processes in soil and groundwater environments that act without human intervention to reduce the mass, toxicity, mobility, volume, or concentration of contaminants in those media. Monitored natural attenuation (MNA) protocols generally involve the collection of biogeochemical data from groundwater monitoring wells at sites. The data are correlated in time and space with the various chemicals of concern (COC's) to establish predominant biodegradation mechanisms. Modelers using the first-order decay expression typically use the rate coefficient as a calibration parameter and adjust it until the transport model results match field data. With this approach, uncertainties with a number of parameters (e.g., dispersion, sorption, biodegradation, etc.) are lumped together in a single calibration parameter. The problems associated with the lumped parameter approach are illustrated using two commonly used models, BIOSCREEN and Buscheck/Alcantar Analytical Solution, in a variety of practical examples. The natural attenuation decay rate estimated using the lumped parameter approach is distinguished from a biodegradation rate established by isolating processes and examining biodegradation lines of evidence. The half-life determined from empirical data using the lumped parameter approach is often mistakenly interchanged with a biodegradation half-life when it is an all-encompassing half-life based on the interaction of numerous processes. Isolation of the processes, as they are represented in the governing transport equation, and a rationale approach at parameter estimation to avoid the potential pitfalls of the all-inclusive “attenuation rate,” are provided. In closing, it is imperative to implement the following steps to dissern lumped process degradation rates from biodegradation half-lives: (a) be sure the rate/half-life processes are clarified as to what they encompass, (b) establish exactly how the rate/half-life was determined, (c) make certain other processes, such as dispersion, were estimated correctly, and (d) if the half-life is presented as a first-order biodegradation rate, examine the available lines of evidence to substantiate it.     

Selecting Remediation Goals by Assessing the Natural Attenuation Capacity of Groundwater Systems

Remediation goals for the source areas of a chlorinated ethene-contaminated groundwater plume were identified by assessing the natural attenuation capacity of the aquifer system. The redox chemistry of the site indicates that sulfate-reducing (H₂ ∼ 2 nanomoles [nM]) per liter conditions near the contaminant source grade to Fe(III)-reducing conditions (H₂ ∼ 0.5 nM) downgradient of the source. Sulfate-reducing conditions facilitate the initial reduction of perchloroethene (PCE) to trichloroethene (TCE), cis-dichloroethene (cis-DCE), and vinyl chloride (VC). Subsequently, the Fe(III)-reducing conditions drive the oxidation of cis-DCE and VC to carbon dioxide and chloride. This sequence gives the aquifer a substantial capacity for biodegrading chlorinated ethenes. Natural attenuation capacity (the slope of the steady-state contaminant concentration profile along a groundwater flowpath) is a function of biodegradation rates, aquifer dispersive characteristics, and groundwater flow velocity. The natural attenuation capacity at the Kings Bay, Georgia site was assessed by estimating groundwater flowrates (∼0.23±0.12 m/d) and aquifer dispersivity (∼1 m) from hydrologic and scale considerations. Apparent biodegradation rate constants (PCE and TCE ∼0.01 d^-1; cis-DCE and VC ∼0.025 d^-1) were estimated from observed contaminant concentration changes along aquifer flowpaths. A boundary-value problem approach was used to estimate levels to which contaminant concentrations in the source areas must be lowered (by engineered removal), or groundwater flow velocities lowered (by pumping) for the natural attenuation capacity to achieve maximum concentration limits (MCLs) prior to reaching a predetermined regulatory point of compliance.     

Legal Aspects of Natural Attenuation in Germany

The legal aspects of Natural Attenuation are multifarious. Therefore, the specific legal situation in Germany shall be described in the following as an example of the classification of NA in an European country. Additionally, a short reference to the international dimension of NA is included at the end. The article is meant to introduce the reader to the ongoing legal discussion in Germany. A comprehensive legal examination will be part of the final report of the so-called 'KORA' project (Natural Attenuation: Retention and Degradation Processes Reducing Contaminations in Groundwater and Soil) funded by the German Federal Ministry of Education and Research. The authors participate in this project as coordinator for legal affairs. The final report is expected in 2006.     

Effects of co-substrates and inhibitors on the anaerobic O-demethylation of methyl <Emphasis Type="Italic">tert</Emphasis>-butyl ether (MTBE)

Methyl tert-butyl ether (MTBE) contamination is widespread in aquifers near urban areas around the world. Since this synthetic fuel oxygenate is resistant to most physical methods of treating fuel-contaminated water, biodegradation may be a useful means of remediation. Currently, information on anaerobic MTBE degradation is scarce. Depletion has been observed in soil and sediment microcosms from a variety of locations and under several redox conditions, but the responsible organisms are unknown. We are studying anaerobic consortia, enriched from contaminated sediments for MTBE-utilizing microorganisms for over a decade. MTBE degradation occurred in the presence of other fuel components and was not affected by toluene, benzene, ethanol, methanol, or gasoline. Many aryl O-methyl ethers, such as syringic acid, that are O-demethylated by acetogenic bacteria, were also O-demethylated by the MTBE-utilizing enrichment cultures. The addition of these compounds as co-substrates increased the rate of MTBE degradation, offering a potentially useful method of stimulating the MTBE degradation rate in situ. Propyl iodide caused light-reversible inhibition of MTBE degradation, suggesting that the MTBE degradation process is corrinoid dependent. The anaerobic MTBE degradation process was not directly coupled to methanogenesis or sulfidogenesis and was inhibited by the bactericidal antibiotic, rifampicin. These results suggest that MTBE degradation is mediated by acetogenic bacteria.     

Multi-substrate biodegradation kinetics of MTBE and BTEX mixtures by Pseudomonas aeruginosa

Biodegradation of MTBE under various multi-substrate conditions by Pseudomonas aeruginosa was investigated in this research. The addition of BTEX in various combinations significantly inhibited MTBE biodegradation. This result was mainly due to the non-competitive inhibition between MTBE and BTEX compounds. The rate of MTBE biodegradation decreased with the increasing substrate number for multi-substrate conditions. Additionally, the kinetic models developed in this research successfully simulate the degradation of MTBE under various multi-substrate conditions. However, the accumulation of TBA during MTBE biodegradation revealed that P. aeruginosa was unable to degrade TBA during the period of time tested.     

Natural Biological Attenuation of Phenoxy Herbicides in Groundwater: Dow AgroSciences Paritutu Site, New Zealand

Groundwater beneath a manufacturing site previously used for herbicide production has been shown to contain low levels of chlorinated phenols and phenoxy herbicides. The importance of biological processes in the natural attenuation of the groundwater contaminants was examined as part of an ongoing investigation. Analysis of the groundwater chemistry indicated that the aquifer is essentially aerobic in the area of interest. Laboratory microcosm experiments demonstrated that the naturally occurring microorganisms rapidly degraded a mixture of the predominant organic contaminants under conditions that simulate those in the aquifer. The time required for 50% degradation ranged from 7 to 27 days for 2,4-dichlorophenoxyacetic acid (2,4-D) and 9 to 49 days for 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). The rapid biodegradation rates were consistent with the results of microbiological analyses, which demonstrated that a substantial proportion of the culturable bacteria were capable of growth on 2,4-D as a sole carbon source. Results of gene probe assays suggested the numbers of bacteria with the potential to degrade 2,4-D were one to two orders of magnitude higher than were detected using plate counts. Computer model simulations illustrated that biodegradation would be expected to significantly contribute to the attenuation of 2,4-D and 2,4,5-T in the aquifer. On the basis of the various lines of evidence and the distances the groundwater must travel, the groundwater contaminants would be expected to naturally biodegrade to below levels of concern before the plume reaches potential environmental receptors.     

Aerobic MTBE biodegradation: an examination of past studies, current challenges and future research directions

With the current practice of amending gasoline with up to 15% by volume MTBE, the contamination of groundwater by MTBE has become widespread. As a result, the bioremediation of MTBE-impacted aquifers has become an active area of research. A review of the current literature on the aerobic biodegradation of MTBE reveals that a number of cultures from diverse environments can either partially degrade or completely mineralize MTBE. MTBE is either utilized as a sole carbon and energy source or is degraded cometabolically by cultures grown on alkanes. Reported degradation rates range from 0.3 to 50 mg MTBE/g cells/h while growth rates (0.01–0.05 g MTBE/g cells/d) and cellular yields (0.1–0.2 g cells/g MTBE) are generally low. Studies on the mechanisms of MTBE degradation indicate that a monooxygenase enzyme cleaves the ether bond yielding tert-butyl alcohol (TBA) and formaldehyde as the dominant detectable intermediates. TBA is further degraded to 2-methyl-2-hydroxy-1-propanol, 2-hydroxyisobutyric acid, 2-propanol, acetone, hydroxyacteone and eventually, carbon dioxide. The majority of these intermediates are also common to mammalian MTBE metabolism. Laboratory studies on the degradation of MTBE in the presence of gasoline aromatics reveal that while degradation rates of other gasoline components are generally not inhibited by MTBE, MTBE degradation could be inhibited in the presence of more easily biodegradable compounds. Controlled field studies are clearly needed to elucidate MTBE degradation potential in co-contaminant plumes. Based on the reviewed studies, it is likely that a bioremediation strategy involving direct metabolism, cometabolism, bioaugmentation, or some combination thereof, could be applied as a feasible and cost-effective treatment method for MTBE contamination.     

Microbial degradation and fate in the environment of methyl tert-butyl ether and related fuel oxygenates

Oxygenates, mainly methyl tert-butyl ether (MTBE), are commonly added to gasoline to enhance octane index and improve combustion efficiency. Other oxygenates used as gasoline additives are ethers such as ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME), and alcohols such as tert-butyl alcohol (TBA). As a result of its wide use, MTBE has been detected, mainly in the USA, in groundwater and surface waters, and is a cause of concern because of its possible health effects and other undesirable consequences. MTBE is a water-soluble and mobile compound that generates long pollution plumes in aquifers impacted by gasoline releases from leaking tanks. Field observations concur in estimating that, because of recalcitrance to biodegradation, natural attenuation is slow (half-life of at least 2 years). However, quite significant advances have been made in recent years concerning the microbiology of the degradation of MTBE and other oxygenated gasoline additives. The recalcitrance of these compounds results from the presence in their structure of an ether bond and of a tertiary carbon structure. For the most part, only aerobic microbial degradation systems have been reported so far. Consortia capable of mineralizing MTBE have been selected. Multiple instances of the cometabolism of MTBE with pure strains or with microflorae, growing on n-alkanes, isoalkanes, cyclohexane or ethers (diethyl ether, ETBE), have been described. MTBE was converted into TBA in all cases and was sometimes further degraded, but it was not used as a carbon source by the pure strains. However, mineralization of MTBE and TBA by several pure bacterial strains using these compounds as sole carbon and energy source has recently been reported. The pathways of metabolism of MTBE involve the initial attack by a monooxygenase. In several cases, the enzyme was characterized as a cytochrome P-450. After oxygenation, the release of a C -unit as formaldehyde or formate leads to the production of TBA, which can be converted to 2-hydroxyisobutyric acid and further metabolized. Developments in microbiology make biological treatment of water contaminated with MTBE and other oxygenates an attractive possibility. Work concerning ex situ treatment in biofilters by consortia and by pure strains, and involving or not cometabolism, is under way. Furthermore, the development of in situ treatment processes is a promisinggoal.     

Aerobic MTBE biodegradation in the presence of BTEX by two consortia under batch and semi-batch conditions

This study explores the effect of microbial consortium composition and reactor configuration on methyl tert-butyl ether (MTBE) biodegradation in the presence of benzene, toluene, ethylbenzene and p-xylenes(BTEX). MTBE biodegradation was monitored in the presence and absence of BTEX in duplicate batch reactors inoculated with distinct enrichment cultures: MTBE only (MO—originally enriched on MTBE) and/or MTBE BTEX (MB—originally enriched on MTBE and BTEX). The MO culture was also applied in a semi-batch reactor which received both MTBE and BTEX periodically in fresh medium after allowing cells to settle. The composition of the microbial consortia was explored using a combination of 16S rRNA gene cloning and quantitative polymerase chain reaction targeting the known MTBE-degrading strain PM1^T. MTBE biodegradation was completely inhibited by BTEX in the batch reactors inoculated with the MB culture, and severely retarded in those inoculated with the MO culture (0.18 ± 0.04 mg/L-day). In the semi-batch reactor, however, the MTBE biodegradation rate in the presence of BTEX was almost three times as high as in the batch reactors (0.48 ± 0.2 mg/L-day), but still slower than MTBE biodegradation in the absence of BTEX in the MO-inoculated batch reactors (1.47 ± 0.47 mg/L-day). A long lag phase in MTBE biodegradation was observed in batch reactors inoculated with the MB culture (20 days), but the ultimate rate was comparable to the MO culture (0.95 ± 0.44 mg/L-day). Analysis of the cultures revealed that strain PM1^T concentrations were lower in cultures that successfully biodegraded MTBE in the presence of BTEX. Also, other MTBE degraders, such as Leptothrix sp. and Hydrogenophaga sp. were found in these cultures. These results demonstrate that MTBE bioremediation in the presence of BTEX is feasible, and that culture composition and reactor configuration are key factors.     

Cometabolism of methyl tert-butyl ether (MTBE) with alkanes

The release of methyl tert-butyl ether (MTBE) to the environment, mainly from damaged gasoline underground storage tanks or distribution systems spills, has provoked extended groundwater pollution. Biological treatments are, in general, a good alternative for bioremediation of polluted sites; however, MTBE elimination from environment has constituted a challenge because of its chemical structure and physicochemical properties. The combination of a stable ether link and the branched moiety hinder biodegradation. Initial studies found MTBE to be highly recalcitrant but, in the last decade, reports of its biodegradation have been published first under aerobic conditions and just recently under anaerobic conditions. Microbial MTBE degradation is characterized by bacteria having low growth rates (0.35 day⁻¹) and biomass yields (average value 0.24 g biomass/g MTBE). Alternatively, cometabolism (defined as the transformation of a non-growth substrate in the obligate presence of a growth substrate), has been considered since it uncouples biodegradation of the contaminant from growth, reducing the long adaptation and propagation period. This period has been reported to be of several months in systems where it is degraded as sole carbon source. Cometabolic degradation rates are between 0.3 and 61 nmol/min/mg protein (in the same range of direct aerobic metabolism). However, a major concern in MTBE cometabolism is that the accumulation of tert-butyl alcohol (TBA) may, under certain cases, result in an incomplete site cleanup. This paper reviews in detail the implicated enzymes and field treatments for the cometabolism of MTBE degradation with alkanes as growth substrates.