Isoelectric precipitation of soy protein. II. Kinetics of protein aggregate growth and breakage

Protein aggregate growth and breakage in agitated suspensions are modeled. The model includes growth of particles by a turbulent collision mechanism and breakage by a hydrodynamic shear mechanism. In the model, breakage results in the splitting of the particles into several small fragments. The model parameters are a growth rate constant and a breakage rate constant. Aggregate size distributions were measured with a Coulter counter and the data interpreted using a population balance that governs the steady-state particle size distribution in a continuous stirred tank reactor. Effects of changes in the operating variables pH, concentration, mean residence time, ionic strength, and mixing power input on the model kinetic parameters are investigated.     

Analytical model of hygroscopic particle behavior in human airways

A model is developed to calculate the deposition of hygroscopic aerosols in the human tracheobronchial (TB) tree. The TB airflow pattern assumed is consistent with experimental observations and accounts for anatomical features such as the larynx and cartilaginous rings in large airways. Some original deposition efficiency formulae are presented for laminar and turbulent airstreams. Stepwise growth is simulated by changes in particle size and density at each TB generation. The dose distribution of NaCl aerosols is studied as a function of inhaled particle size and flow rate. Two NaCl growth rate curves are used which differ in the mode of aerosol-air mixing in the trachea. The initial rate of aerosol mixing in the human due to the laryngeal jet is shown to be an important factor affecting the deposition of hygroscopic aerosols. Total TB deposition of NaCl exceeds that for nonhygroscopic particles of the same inhaled aerodynamic size. Hygroscopic growth can also influence the regional TB distribution of dose when submicron NaCl particles grow rapidly enough to deposit by impaction and sedimentation.     

Influenza virus in human exhaled breath: an observational study

Background

Recent studies suggest that humans exhale fine particles during tidal breathing but little is known of their composition, particularly during infection.

Methodology/Principal Findings

We conducted a study of influenza infected patients to characterize influenza virus and particle concentrations in their exhaled breath. Patients presenting with influenza-like-illness, confirmed influenza A or B virus by rapid test, and onset within 3 days were recruited at three clinics in Hong Kong, China. We collected exhaled breath from each subject onto Teflon filters and measured exhaled particle concentrations using an optical particle counter. Filters were analyzed for influenza A and B viruses by quantitative polymerase chain reaction (qPCR). Twelve out of thirteen rapid test positive patients provided exhaled breath filter samples (7 subjects infected with influenza B virus and 5 subjects infected with influenza A virus). We detected influenza virus RNA in the exhaled breath of 4 (33%) subjects–three (60%) of the five patients infected with influenza A virus and one (14%) of the seven infected with influenza B virus. Exhaled influenza virus RNA generation rates ranged from <3.2 to 20 influenza virus RNA particles per minute. Over 87% of particles exhaled were under 1 µm in diameter.

Conclusions

These findings regarding influenza virus RNA suggest that influenza virus may be contained in fine particles generated during tidal breathing, and add to the body of literature suggesting that fine particle aerosols may play a role in influenza transmission.     

Affinity of red blood cell membrane for particle surfaces measured by the extent of particle encapsulation.

An experimental technique and a simple analysis are presented that can be used to quantitate the affinity of red blood cell membrane for surfaces of small beads or microsomal particles up to 3 micrometers Diam. The technique is demonstrated with an example of dextran-mediated adhesion of small spherical red cell fragments to normal red blood cells. Cells and particles are positioned for contact by manipulation with glass micropipets. The mechanical equilibrium of the adhesive contact is represented by the variational expression that the decrease in interfacial free energy due to a virtual increase in contact area is balanced by the increase in elastic energy of the membrane due to virtual deformation. The surface affinity is the reduction in free energy per unit area of the interface associated with the formation of adhesive contact. From numerical computations of equilibrium configurations, the surface affinity is derived as a function of the fractional extent of particle encapsulation. The range of surface affinities for which the results are applicable is increased over previous techniques to several times the value of the elastic shear modulus. It is shown that bending rigidity of the membrane has little effect on the analytical results for particles 1--3 micrometers Diam and that results are essentially the same for both cup- and disk-shaped red cells. A simple analytical model is shown to give a good approximation for surface affinity (normalized by the elastic shear modulus) as a function of the fractional extent of particle encapsulation. The model predicts that a particle would be almost completely vacuolized for surface affinities greater than or equal to 10 times the elastic shear modulus. Based on an elastic shear modulus of 6.6 x 10(-3) dyn/cm, the range for the red cell-particle surface affinity as measured by this technique is from approximately 7 x 10(-4) to 7 x 10(-2) erg/cm2. Also, an approximate relation is derived for the level of surface affinity necessary to produce particle vacuolization by a phospholipid bilayer surface which possesses bending rigidity and a fixed tension.     

Using computational fluid dynamics software to estimate circulation time distributions in bioreactors

Nonideal mixing in many fermentation processes can lead to concentration gradients in nutrients, oxygen, and pH, among others. These gradients are likely to influence cellular behavior, growth, or yield of the fermentation process. Frequency of exposure to these gradients can be defined by the circulation time distribution (CTD). There are few examples of CTDs in the literature, and experimental determination of CTD is at best a challenging task. The goal in this study was to determine whether computational fluid dynamics (CFD) software (FLUENT 4 and MixSim) could be used to characterize the CTD in a single-impeller mixing tank. To accomplish this, CFD software was used to simulate flow fields in three different mixing tanks by meshing the tanks with a grid of elements and solving the Navier-Stokes equations using the kappa-epsilon turbulence model. Tracer particles were released from a reference zone within the simulated flow fields, particle trajectories were simulated for 30 s, and the time taken for these tracer particles to return to the reference zone was calculated. CTDs determined by experimental measurement, which showed distinct features (log-normal, bimodal, and unimodal), were compared with CTDs determined using CFD simulation. Reproducing the signal processing procedures used in each of the experiments, CFD simulations captured the characteristic features of the experimentally measured CTDs. The CFD data suggests new signal processing procedures that predict unimodal CTDs for all three tanks.     

Measuring airway exchange of endogenous acetone using a single-exhalation breathing maneuver.

Exhaled acetone is measured to estimate exposure or monitor diabetes and congestive heart failure. Interpreting this measurement depends critically on where acetone exchanges in the lung. Health professionals assume exhaled acetone originates from alveolar gas exchange, but experimental data and theoretical predictions suggest that acetone comes predominantly from airway gas exchange. We measured endogenous acetone in the exhaled breath to evaluate acetone exchange in the lung. The acetone concentration in the exhalate of healthy human subjects was measured dynamically with a quadrupole mass spectrometer and was plotted against exhaled volume. Each subject performed a series of breathing maneuvers in which the steady exhaled flow rate was the only variable. Acetone phase III had a positive slope (0.054+/-0.016 liter-1) that was statistically independent of flow rate. Exhaled acetone concentration was normalized by acetone concentration in the alveolar air, as estimated by isothermal rebreathing. Acetone concentration in the rebreathed breath ranged from 0.8 to 2.0 parts per million. Normalized end-exhaled acetone concentration was dependent on flow and was 0.79+/-0.04 and 0.85+/-0.04 for the slow and fast exhalation rates, respectively. A mathematical model of airway and alveolar gas exchange was used to evaluate acetone transport in the lung. By doubling the connective tissue (epithelium+mucosal tissue) thickness, this model predicted accurately (R2=0.94+/-0.05) the experimentally measured expirograms and demonstrated that most acetone exchange occurred in the airways of the lung. Therefore, assays using exhaled acetone measurements need to be reevaluated because they may underestimate blood levels.     

A two-component theory of aerosol deposition in lung airways

The deposition of aerosol particles in the human lung airways is due to two distinct mechanisms. One is by direct deposition resulting from diffusion, sedimentation and impaction as the aerosol moves in and out of the lung. The other is an indirect mechanism by which particles are transported mechanically from the tidal air to the residential air and eventually captured by the airways due to intrinsic particle motion. This last mechanism is not well understood at present. Using a trumpet airway model constructed from Weibel's data, a two-component theory is developed. In this theory, the particle concentrations in the airways and the alveoli at a given airway depth are considered to be quantitatively different. This difference in concentrations will cause a net mixing between the tidal and residential aerosol as the aerosol is breathed in and out. A distribution parameter is then introduced to account for the distribution of ventilation. The effect of intrinsic particle motion on the aerosol mixing is also included. From this theory, total and regional deposition in the lung at the steady mouth breathing without pause is calculated for several different respiratory cycles. The results agree reasonably well with the experimental data.     

Propagation of respiratory aerosols by the vuvuzela

Vuvuzelas, the plastic blowing horns used by sports fans, recently achieved international recognition during the FIFA World Cup soccer tournament in South Africa. We hypothesised that vuvuzelas might facilitate the generation and dissemination of respiratory aerosols. To investigate the quantity and size of aerosols emitted when the instrument is played, eight healthy volunteers were asked to blow a vuvuzela. For each individual the concentration of particles in expelled air was measured using a six channel laser particle counter and the duration of blowing and velocity of air leaving the vuvuzela were recorded. To allow comparison with other activities undertaken at sports events each individual was also asked to shout and the measurements were repeated while using a paper cone to confine the exhaled air. Triplicate measurements were taken for each individual. The mean peak particle counts were 658 × 10(3) per litre for the vuvuzela and 3.7 × 10(3) per litre for shouting, representing a mean log(10) difference of 2.20 (95% CI: 2.03,2.36; p < 0.001). The majority (>97%) of particles captured from either the vuvuzela or shouting were between 0.5 and 5 microns in diameter. Mean peak airflows recorded for the vuvuzela and shouting were 6.1 and 1.8 litres per second respectively. We conclude that plastic blowing horns (vuvuzelas) have the capacity to propel extremely large numbers of aerosols into the atmosphere of a size able to penetrate the lower lung. Some respiratory pathogens are spread via contaminated aerosols emitted by infected persons. Further investigation is required to assess the potential of the vuvuzela to contribute to the transmission of aerosol borne diseases. We recommend, as a precautionary measure, that people with respiratory infections should be advised not to blow their vuvuzela in enclosed spaces and where there is a risk of infecting others.     

Comparative filter binding study of H5 to nucleosome core particles,H1, H5 depleted chromatosomes and DNA fragments

The filter-binding technique with PEI treated glass fiber is used to study the interaction of histone H5 to core particles, chromatosomes and DNA derived from it. By working at very low concentrations of interacting particles we are able to study the effective binding process independent of interfering insoluble complexes. The interactions are characterized by a very high affinity. An intrinsically higher affinity of H5 for cores and chromatosomes versus chromatosome derived DNA is demonstrated. Both chromatosomes and DNA derived from these bind about twice the amount as compared to core particles, which saturate at about one H5 per core particle.Abbreviations GH5 globular domain of histone H5 - PEI polyethyleneimine     

Laboratory measurements of the spectral properties of estuarine suspended particles

Laboratory measurements have been made of the spectral reflectance of size-fractionated suspended sediments from two estuarine systems. The results show that reflectance at wavelengths between 400 and 1000 nm increases with decreasing particle size for given sediment masses. Preliminary interpretation suggests that a new factor, target area, which is derived from the volume and number distribution of particles in a suspension, is proportional to the reflectance of the suspension. Reflectance in the near infra-red is shown to be unaffected by other in-water parameters and is also largely independent of the colour or nature of the particles. The relationship between spectral reflectance in the near infra-red and target area therefore provides a means of estimating suspended sediment concentration from remotely sensed imagery if the particle size distribution is known or can be estimated.     

A batch reactor mass transfer kinetic model for immobilized biomass biosorption

Inactive cells of Rhizopus arrhizus have been immobilized into the form of particles of desirable particle size using a proprietary immobilization technique. The immobilized biomass particles are porous and are members of a new generation of biological origin adsorbents. The uranium adsorptive behavior of the biosorbent particles was modeled using a batch reactor mass transfer kinetic model of the biosorption process. The model successfully predicts the batch reactor adsorbate (uranium) concentration profiles and has provided significant insights on the way biosorbents function.     

A novel method of determination of the internal enzyme distribution within porous solid supports and the deactivation rate constant

This article presents a method for determining the rate constant for deactivation and the internal distribution of immobilized enzyme. This method makes use of the parallel deactivation process in a diffusion-controlled regime, in which the internal activity profile behaves like a penetration front. This front basically traces through the initial active enzymatic profile, and one can determine the internal profile and the rate constant for deactivation from the experimentally observable bulk concentration versus time. This method is applied to the experimental data of the system of hydrogen-peroxide-immobilized catalase on controlled pore glass and Si-Al particles.     

Aerosol particle deposition in human lungs

The pneumoconiosis developing after inhalation of air-borne dusts in the work place depends on the relation between the value of particle deposition in the respiratory tract and the rate of particle clearance from sites of their deposition. For testing the deposition in humans an aerosol of paraffin oil was given to a cohort of healthy persons. The characteristic parameters of the aerosol had been defined. The concentration of particles in 5 channels were measured in both the inhaled and exhaled air samples using the particle counter ROYCO 225. The deposition fraction was calculated from the relation of particle amount in expired air to the amount in inhaled air in each distribution class. In this preliminary report the results comparable with the prediction mathematical curve are discussed.     

Surfactant Protein A in Exhaled Endogenous Particles Is Decreased in Chronic Obstructive Pulmonary Disease (COPD) Patients: A Pilot Study

Background

Exhaled, endogenous particles are formed from the epithelial lining fluid in small airways, where surfactant protein A (SP-A) plays an important role in pulmonary host defense. Based on the knowledge that chronic obstructive pulmonary disease (COPD) starts in the small airway epithelium, we hypothesized that chronic inflammation modulates peripheral exhaled particle SP-A and albumin levels. The main objective of this explorative study was to compare the SP-A and albumin contents in exhaled particles from patients with COPD and healthy subjects and to determine exhaled particle number concentrations.

Methods

Patients with stable COPD ranging from moderate to very severe (n = 13), and healthy non-smoking subjects (n = 12) were studied. Subjects performed repeated breath maneuvers allowing for airway closure and re-opening, and exhaled particles were optically counted and collected on a membrane using the novel PExA^® instrument setup. Immunoassays were used to quantify SP-A and albumin.

Results

COPD patients exhibited significantly lower SP-A mass content of the exhaled particles (2.7 vs. 3.9 weight percent, p = 0.036) and lower particle number concentration (p<0.0001) than healthy subjects. Albumin mass contents were similar for both groups.

Conclusions

Decreased levels of SP-A may lead to impaired host defense functions of surfactant in the airways, contributing to increased susceptibility to COPD exacerbations. SP-A in exhaled particles from small airways may represent a promising non-invasive biomarker of disease in COPD patients.     

Spatial glass transition temperature variations in polymer glass: application to a maltodextrin-water system

A model was developed to predict spatial glass transition temperature (T(g)) distributions in glassy maltodextrin particles during transient moisture sorption. The simulation employed a numerical mass transfer model with a concentration dependent apparent diffusion coefficient (D(app)) measured using Dynamic Vapor Sorption. The mass average moisture content increase and the associated decrease in T(g) were successfully modeled over time. Large spatial T(g) variations were predicted in the particle, resulting in a temporary broadening of the T(g) region. Temperature modulated differential scanning calorimetry confirmed that the variation in T(g) in nonequilibrated samples was larger than in equilibrated samples. This experimental broadening was characterized by an almost doubling of the T(g) breadth compared to the start of the experiment. Upon reaching equilibrium, both the experimental and predicted T(g) breadth contracted back to their initial value.     

Dynamic measurements of CO diffusing capacity using discrete samples of alveolar gas

It has been shown that measurements of the diffusing capacity of the lung for CO made during a slow exhalation [DLCO(exhaled)] yield information about the distribution of the diffusing capacity in the lung that is not available from the commonly measured single-breath diffusing capacity [DLCO(SB)]. Current techniques of measuring DLCO(exhaled) require the use of a rapid-responding (less than 240 ms, 10-90%) CO meter to measure the CO concentration in the exhaled gas continuously during exhalation. DLCO(exhaled) is then calculated using two sample points in the CO signal. Because DLCO(exhaled) calculations are highly affected by small amounts of noise in the CO signal, filtering techniques have been used to reduce noise. However, these techniques reduce the response time of the system and may introduce other errors into the signal. We have developed an alternate technique in which DLCO(exhaled) can be calculated using the concentration of CO in large discrete samples of the exhaled gas, thus eliminating the requirement of a rapid response time in the CO analyzer. We show theoretically that this method is as accurate as other DLCO(exhaled) methods but is less affected by noise. These findings are verified in comparisons of the discrete-sample method of calculating DLCO(exhaled) to point-sample methods in normal subjects, patients with emphysema, and patients with asthma.     

Measurement of exhaled hydrogen peroxide from rabbit lungs

Exhaled H2O2 is considered an indicator of lung inflammatory and oxidative stress. Moreover, H2O2 may be involved in signal transduction processes. It is not fully elucidated to what extent (i) H2O2 escapes from the intravascular compartment, and (ii) pulmonary H2O2 generation and nasopharyngeal H2O2 generation contribute to exhaled H2O2. We investigated H2O2 concentrations in breath condensate from isolated buffer-perfused and ventilated rabbit lungs, and from both intubated and spontaneously breathing rabbits with a horseradish peroxidase/2',7'dichlorofluorescin assay. For the perfused lungs, a H2O2 concentration of 58 +/- 19 nM was found. Addition of H2O2 to the buffer fluid resulted in only minute appearance in the exhaled air (<0.001%). Levels of exhaled H2O2 in intubated rabbits and perfused lungs were virtually identical. Nearly ten-fold higher levels were detected in spontaneously breathing rabbits. Decreasing the inspired oxygen concentration from 21% to 1% resulted in a tendency toward decreased H2O2 exhalation in perfused lungs. In contrast, phorbol-12-myristate-13-acetate (PMA) prompted a approximately 4-fold increase in H2O2 exhalation. We conclude that the horseradish peroxidase/2',7'dichlorofluorescin assay is a feasible technique to measure H2O2 in exhaled breath condensate in rabbits. When collecting exhaled air via the tracheal tube, the signal represents pulmonary H2O2 generation with the contribution of the remaining body being negligible.     

Re-plumbing in a Mediterranean sponge

Observations are reported for Dysidea avara sponges where once functioning oscula (outlets) are converted through internal re-plumbing into functioning oversized ostia (OSO; inlets). Flow tank studies employed high-speed photography and particle tracking of laser-illuminated 0.5-6.0 microm diameter glass beads to trace particles streaming into OSO. A fluorescein dye/glass bead uptake experiment showed that an oversized ostium was connected through internal structures to the lone osculum. Beginning 30 s after uptake and continuing over a 20 min period, dye streamed from the osculum, but no beads emerged. Scanning electron microscopy revealed that beads were deposited only on the inhalant side of particle filtering choanocyte chambers and not on the exhalant side, suggesting that internal re-plumbing had occurred. Functioning OSO were also found on freshly collected specimens in the field, making it highly unlikely that formation of OSO was only an artefact of sponges being held in a laboratory tank.     

Improvement in separation characteristics of protein precipitates by acoustic conditioning

The effect of acoustic conditioning on the particle size distribution of isoelectric and calcium-ion-precipitated soya protein has been examined in low-residence-time chambers. In a previous study a beat frequency of 5 Hz obtained using a dual-source system of opposing vibrators was determined as giving optimal improvement in particle-settling characteristics for isoelectric soya protein precipitate. In this study the effect of amplitude of vibration, a measure of acoustic power input, and residence time of acoustic conditioning has been examined.Acoustic power input changed the flow pattern in the conditioning chamber from laminar streamline flow to a well-mixed, turbulent pattern. Such a mixing effect promoted the rapid aggregation of fine particles, a process that was modeled on the basis of orthokinetically controlled collisions. The rate of removal of fine particles due to acoustic conditioning was shown to be proportional to a mixing effect that was releated to the acoustic power dissipated per unit volume.The consequences of fine-particle aggregation on the centrifugal recovery of the precipitate are discussed.     

Discrete particle simulations predicting mixing behavior of solid substrate particles in a rotating drum fermenter.

A soft-sphere discrete particle model was used to simulate mixing behavior of solid substrate particles in a slow rotating drum for solid-state fermentation. In this approach, forces acting on and subsequent motion of individual particles can be predicted. The (2D) simulations were qualitatively and quantitatively validated by mixing experiments using video and image analysis techniques. It was found that the simulations successfully predicted the mixing progress as a function of the degree of filling and size of the drum. It is shown that only relatively large, straight baffles perpendicular to the drum wall (67% of the drum radius) increase the mixing performance of the rotating drum. Considering the different aspects of mixing dealt with in this work, it is concluded that the soft sphere discrete particle model can serve as a valuable tool for investigating mixing of solid substrate particles. Finally, it is expected that this model may evolve into a potential tool for design and scale-up of mixed solid-state fermenters.