New superfamily members identified for Schiff-base enzymes based on verification of catalytically essential residues

Enzymes that utilize a Schiff-base intermediate formed with their substrates and that share the same alpha/beta barrel fold comprise a mechanistically diverse superfamily defined in the SCOPS database as the class I aldolase family. The family includes the "classical" aldolases fructose-1,6-(bis)phosphate (FBP) aldolase, transaldolase, and 2-keto-3-deoxy-6-phosphogluconate aldolase. Moreover, the N-acetylneuraminate lyase family has been included in the class I aldolase family on the basis of similar Schiff-base chemistry and fold. Herein, we generate primary sequence identities based on structural alignment that support the homology and reveal additional mechanistic similarities beyond the common use of a lysine for Schiff-base formation. The structural and mechanistic correspondence comprises the use of a catalytic dyad, wherein a general acid/base residue (Glu, Tyr, or His) involved in Schiff-base chemistry is stationed on beta-strand 5 of the alpha/beta barrel. The role of the acid/base residue was probed by site-directed mutagenesis and steady-state and pre-steady-state kinetics on a representative member of this family, FBP aldolase. The kinetic results are consistent with the participation of this conserved residue or position in the protonation of the carbinolamine intermediate and dehydration of the Schiff base in FBP aldolase and, by analogy, the class I aldolase family.     

The crystal structure of human muscle aldolase at 3.0 A resolution

The three-dimensional structure of fructose-1,6-bisphosphate aldolase from human muscle has been determined at 3.0 A resolution by X-ray crystallography. The active protein is a tetramer of 4 identical subunits each of which is composed of an eight-stranded alpha/beta-barrel structure. The lysine residue responsible for Schiff base formation with the substrate is located near the centre of the barrel in the middle of the sixth beta-strand. While the overall topology of the alpha/beta-barrel is very similar to those found in several other enzymes, the distribution of charged residues inside the core of the barrel seems distinct. The quaternary fold of human muscle aldolase uses interfacial regions also involved in the subunit association of other alpha/beta-barrel proteins found in glycolysis, but exploits these regions in a manner not seen previously.     

Crystal structures of the metal-dependent 2-dehydro-3-deoxy-galactarate aldolase suggest a novel reaction mechanism

Carbon-carbon bond formation is an essential reaction in organic chemistry and the use of aldolase enzymes for the stereochemical control of such reactions is an attractive alternative to conventional chemical methods. Here we describe the crystal structures of a novel class II enzyme, 2-dehydro-3-deoxy-galactarate (DDG) aldolase from Escherichia coli, in the presence and absence of substrate. The crystal structure was determined by locating only four Se sites to obtain phases for 506 protein residues. The protomer displays a modified (alpha/beta)(8) barrel fold, in which the eighth alpha-helix points away from the beta-barrel instead of packing against it. Analysis of the DDG aldolase crystal structures suggests a novel aldolase mechanism in which a phosphate anion accepts the proton from the methyl group of pyruvate.     

Possible role of thiol groups in the abnormal kinetics of aldolase in hereditary fructose intolerance

In Hereditary Fructose Intolerance, the apparent Km of liver aldolase for Fructose-1-Phosphate was shown to be very high. The addition of β mercaptoethanol normalizes this low affinity. It seems that the primary defect of this genetic disease involves directly or indirectly the thiol groups of aldolase B.     

A consensus prediction of the secondary structure for the 6-phospho-β-D-galactosidase superfamily

Two separate unrefined models for the secondary structure of two subfamilies of the 6-phospho-β-D -galactosidase superfamily were independently constructed by examining patterns of variation and conservation within homologous protein sequences, assigning surface, interior, parsing, and active site residues to positions in the alignment, and identifying periodicities in these. A consensus model for the secondary structure of the entire superfamily was then built. The prediction tests the limits of an unrefined prediction made using this approach in a large protein with substantial functional and sequence divergence within the family. The protein belongs to the (α–β class), with the core β strands aligned parallel. The supersecondary structural elements that are readily identified in this model is a parallel β sheet built by strands C, D, and E, with helices 2 and 3 connecting strands (C + D) and (D + E), respectively, and an analogous α–β unit (strand G and helix 7) toward the end of the sequence. The resemblance of the supersecondary model to the tertiary structure formed by 8-fold α–β barrel proteins is almost certainly not coincidental. © 1995 Wiley-Liss, Inc.     

Comparison of the folding of 2-Keto-3-deoxy-6-phosphogluconate aldolase,triosephosphate isomerase and pyruvate kinase: Implications in molecular evolution

The 8-fold α/β barrel conformation of 2-keto-3-deoxy-6-phosphogluconate aldolase has been compared to that of triosephosphate isomerase and the A-domain of pyruvate kinase. There are eight supersecondary structure units (α/β) in each of these proteins, and the comparisons were carried out in orientations corresponding to each of the possible congruences, i.e. first to first, first to second,… of the supersecondary structure units. The comparison of the C_α structure of the main chain folding of the three enzymes indicated about 150 equivalences with rootmean-square differences of about 3.1 Å, with no orientational preference, including the aldolase with itself. In addition, there is no sequence homology between the aldolase and the isomerase, and no indication of gene duplication in the former. The lack of orientational preference among the three enzymes suggests convergence to a fold of exceptional stability. However, all three enzymes activate a CH bond adjacent to a carbonyl, and their active sites correspond to the f strand, F helix region of the α/β barrel, thus contradicting the foregoing and suggesting divergent evolution from a common precursor. Other and similar arguments are also presented for and against convergent evolution of these three strikingly similar enzymes.     

Dynamic interplay of membrane‐proximal POTRA domain and conserved loop L6 in Omp85 transporter FhaC

Omp85 transporters mediate protein insertion into, or translocation across, membranes. They have a conserved architecture, with POTRA domains that interact with substrate proteins, a 16‐stranded transmembrane β barrel, and an extracellular loop, L6, folded back in the barrel pore. Here using electrophysiology, in vivo biochemical approaches and electron paramagnetic resonance, we show that the L6 loop of the Omp85 transporter FhaC changes conformation and modulates channel opening. Those conformational changes involve breaking the conserved interaction between the tip of L6 and the inner β‐barrel wall. The membrane‐proximal POTRA domain also exchanges between several conformations, and the binding of FHA displaces this equilibrium. We further demonstrate a dynamic, physical communication between the POTRA domains and L6, which must take place via the β barrel. Our findings thus link all three essential components of Omp85 transporters and indicate that they operate in a concerted fashion in the transport cycle.     

Reversible unfolding and refolding behavior of a monomeric aldolase from Staphylococcus aureus.

Thermal and GdmCl-induced unfolding transitions of aldolase from Staphylococcus aureus are reversible under a variety of solvent conditions. Analysis of the transitions reveals that no partially folded intermediates can be detected under equilibrium conditions. The stability of the enzyme is very low with a delta G0 value of -9 +/- 2 kJ/mol at 20 degrees C. The kinetics of unfolding and refolding of aldolase are complex and comprise at least one fast and two slow reactions. This complexity arises from prolyl isomerization reactions in the unfolded chain, which are kinetically coupled to the actual folding reaction. Comparison with model calculations shows that at least two prolyl peptide bonds give rise to the observed slow folding reactions of aldolase and that all of the involved bonds are presumably in the trans conformation in the native state. The rate constant of the actual folding reaction is fast with a relaxation time of about 15 s at the midpoint of the folding transition at 15 degrees C. The data presented on the folding and stability of aldolase are comparable to the properties of much smaller proteins. This might be connected with the simple and highly repetitive tertiary structure pattern of the enzyme, which belongs to the group of alpha/beta barrel proteins.     

Role of isozyme group-specific sequence 4 in the isozyme-specific properties of human aldolase C

To assess which regions of the aldolase C molecule are required for exhibiting isozyme-specific kinetic properties, we have constructed nine chimeric enzymes of human aldolases A and C. Kinetic studies of these chimeric enzymes revealed that aldolase C absolutely required its own isozyme group-specific sequences (IGS), particularly IGS-4, for exhibiting the characteristics of aldolase C which differ significantly from those of isozymes A and B (Kusakabe T, Motoki K, Hori K. Human aldolase C: characterization of the recombinant enzyme expressed in Escherichia coli. J Biochem (Tokyo) 1994;115:1172–7). Whereas human aldolases A and B required their own isozyme group-specific sequences-1 and -4 (IGS-1 and -4) as the main determinants of isozyme-specific kinetic properties (Motoki K, Kitajima Y, Hori K. Isozyme-specific modules on human aldolase A molecule. J Biol Chem 1993;268:1677–83; Kusakabe T, Motoki K, Sugimoto Y, Takasaki Y, Hori K. Human aldolase B: liver-specific properties of the isoenzyme depend on type B isozyme group-specific sequence. Prot. Eng. 1994;7:1387–93), the present studies indicate that the IGS-1 is principally substitutable between aldolases A and C. The kinetic data also suggests that the connector-2 (amino acid residues 243–306) may modulate the interaction of IGS units with the α/β barrel of the aldolase molecule.     

Analysis of the class I aldolase binding site architecture based on the crystal structure of 2-deoxyribose-5-phosphate aldolase at 0.99A resolution

The crystal structure of the bacterial (Escherichia coli) class I 2-deoxyribose-5-phosphate aldolase (DERA) has been determined by Se-Met multiple anomalous dispersion (MAD) methods at 0.99A resolution. This structure represents the highest-resolution X-ray structure of an aldolase determined to date and enables a true atomic view of the enzyme. The crystal structure shows the ubiquitous TIM alpha/beta barrel fold. The enzyme contains two lysine residues in the active site. Lys167 forms the Schiff base intermediate, whereas Lys201, which is in close vicinity to the reactive lysine residue, is responsible for the perturbed pK(a) of Lys167 and, hence, also a key residue in the reaction mechanism. DERA is the only known aldolase that is able to use aldehydes as both aldol donor and acceptor molecules in the aldol reaction and is, therefore, of particular interest as a biocatalyst in synthetic organic chemistry. The uncomplexed DERA structure enables a detailed comparison with the substrate complexes and highlights a conformational change in the phosphate-binding site. Knowledge of the enzyme active-site environment has been the basis for exploration of catalysis of non-natural substrates and of mutagenesis of the phosphate-binding site to expand substrate specificity. Detailed comparison with other class I aldolase enzymes and DERA enzymes from different organisms reveals a similar geometric arrangement of key residues and implies a potential role for water as a general base in the catalytic mechanism.     

Identification of a dimeric KDG aldolase from Agrobacterium tumefaciens

Agrobacterium tumefaciens is a Gram‐negative bacterium and causative agent of Crown Gall disease that infects a variety of economically important plants. The annotated A. tumefaciens genome contains 10 putative dapA genes, which code for dihydrodipicolinate synthase (DHDPS). However, we have recently demonstrated that only one of these genes (dapA7) encodes a functional DHDPS. The function of the other nine putative dapA genes is yet to be determined. Here, we demonstrate using bioinformatics that the product of the dapA5 gene (DapA5) possesses all the catalytic residues canonical to 2‐keto‐3‐deoxygluconate (KDG) aldolase, which is a class I aldolase involved in glucose metabolism. We therefore expressed, purified, and characterized recombinant DapA5 using mass spectrometry, circular dichroism spectroscopy, analytical ultracentrifugation, and enzyme kinetics. The results show that DapA5 (1) adopts an α/β structure consistent with the TIM‐barrel fold of KDG aldolases, (2) possesses KDG aldolase enzyme activity, and (3) exists as a tight dimer in solution. This study shows for the first time that dapA5 from A. tumefaciens encodes a functional dimeric KDG aldolase.     

Biosynthesis of isoprenoids: crystal structure of the [4Fe-4S] cluster protein IspG

IspG protein serves as the penultimate enzyme of the recently discovered non-mevalonate pathway for the biosynthesis of the universal isoprenoid precursors, isopentenyl diphosphate and dimethylallyl diphosphate. The enzyme catalyzes the reductive ring opening of 2C-methyl-d-erythritol 2,4-cyclodiphosphate, which affords 1-hydroxy-2-methyl-2-(E)-butenyl 4-diphosphate. The protein was crystallized under anaerobic conditions, and its three-dimensional structure was determined to a resolution of 2.7 Å. Each subunit of the c₂ symmetric homodimer folds into two domains connected by a short linker sequence. The N-terminal domain (N domain) is an eight-stranded β barrel that belongs to the large TIM-barrel superfamily. The C-terminal domain (C domain) consists of a β sheet that is flanked on both sides by helices. One glutamate and three cysteine residues of the C domain coordinate a [4Fe-4S] cluster. Homodimer formation involves an extended contact area (about 1100 Å²) between helices 8 and 9 of each respective β barrel. Moreover, each C domain contacts the N domain of the partner subunit, but the interface regions are small (about 430 Å²). We propose that the enzyme substrate binds to the positively charged surface area at the C-terminal pole of the β barrel. The C domain carrying the iron-sulfur cluster could then move over to form a closed conformation where the substrate is sandwiched between the N domain and the C domain. This article completes the set of three-dimensional structures of the non-mevalonate pathway enzymes, which are of specific interest as potential targets for tuberculostatic and antimalarial drugs.     

Energetic approach to the folding of alpha/beta barrels

The folding of a polypeptide into a parallel (alpha/beta)8 barrel (which is also called a circularly permuted beta 8 alpha 8 barrel) has been investigated in terms of energy minimization. According to the arrangement of hydrogen bonds between two neighboring beta-strands of the central barrel therein, such an alpha/beta barrel structure can be folded into six different types: (1) left-tilted, left-handed crossover; (2) left-tilted, right-handed crossover; (3) nontilted, left-handed crossover; (4) nontilted, right-handed crossover; (5) right-tilted, left-handed crossover; and (6) right-tilted, right-handed crossover. Here "tilt" refers to the orientational relation of the beta-strands to the axis of the central beta-barrel, and "crossover" to the beta alpha beta folding connection feature of the parallel beta-barrel. It has been found that the right-tilted, right-handed crossover alpha/beta barrel possesses much lower energy than the other five types of alpha/beta barrels, elucidating why the observed alpha/beta barrels in proteins always assume the form of right tilt and right-handed crossover connection. As observed, the beta-strands in the energy-minimized right-tilted, right-handed crossover (alpha/beta)8-barrel are of strong right-handed twist. The value of root-mean-square fits also indicates that the central barrel contained in the lowest energy (alpha/beta)8 structure thus found coincides very well with the observed 8-stranded parallel beta-barrel in triose phosphate isomerase (TIM). Furthermore, an energetic analysis has been made demonstrating why the right-tilt, right-handed crossover barrel is the most stable structure. Our calculations and analysis support the principle that it is possible to account for the main features of frequently occurring folding patterns in proteins by means of conformational energy calculations even for very complicated structures such as (alpha/beta)8 barrels.     

A Novel Intein-Like Autoproteolytic Mechanism in Autotransporter Proteins

Many virulence factors secreted by pathogenic Gram-negative bacteria are found to be members of the autotransporter protein family. These proteins share a common mechanism by which they exit the periplasm, involving the formation of a 12-stranded β-barrel domain in the outer membrane. The role of this barrel in the secretion of the N-terminal passenger domain is controversial, and no model currently explains satisfactorily the entire body of experimental data. After secretion, some autotransporter barrels autoproteolytically cleave away the passenger, and one crystal structure is known for a barrel of this type in the postcleavage state. Hbp is an autotransporter of the self-cleaving type, which cuts the polypeptide between two absolutely conserved asparagine residues buried within the barrel lumen. Mutation of the first asparagine residue to isosteric aspartic acid prevents proteolysis. Here we present the crystal structure of a truncated Hbp mutant carrying the C-terminal residues of the passenger domain attached to the barrel. This model mimics the state of the protein immediately prior to separation of the passenger and barrel domains, and shows the role of residues in the so-called “linker” between the passenger and β domains. This high-resolution membrane protein crystal structure also reveals the sites of many water molecules within the barrel. The cleavage mechanism shows similarities to those of inteins and some viral proteins, but with a novel means of promoting nucleophilic attack.     

Seeing Engineered Loops in a Gene Delivery Vehicle by cryoEM

In this issue of Structure, Lerch and colleagues present a 4.5?? cryo electron microscopy (cryoEM) structure of a variant of an adeno-associated virus that has been genetically engineered for liver gene therapy. The identification of two structurally distinct loops flanking the highly conserved jellyroll β barrel highlights the potentials of high-resolution cryoEM.     

Mechanical property of a TIM-barrel protein

The mechanical response of a TIM-barrel protein to an applied pressure has been studied. We generated structures under an applied pressure by assuming the volume change to be a linear function of normal mode variables. By Delaunay tessellation, the space occupied by protein atoms is divided uniquely into tetrahedra, whose four vertices correspond to atomic positions. Based on the atoms that define them, the resulting Delaunay tetrahedra are classified as belonging to various secondary structures in the protein. The compressibility of various regions identified with respect to secondary structural elements in this protein is obtained from volume changes of respective regions in two structures with and without an applied pressure. We found that the β barrel region located at the core of the protein is quite soft. The interior of the β barrel, occupied by side chains of β strands, is the softest. The helix, strand, and loop segments themselves are extremely rigid, while the regions existing between these secondary structural elements are soft. These results suggest that the regions between secondary structural elements play an important role in protein dynamics. Another aspect of tetrahedra, referred to as bond distance, is introduced to account for rigidities of the tetrahedra. Bond distance is a measure of separation of the atoms of a tetrahedron in terms of number of bonds along the polypeptide chain or side chains. Tetrahedra with longer bond distances are found to be softer on average. From this behavior, we derive a simple empirical equation, which well describes the compressibilities of various regions. © 1997 Wiley-Liss Inc.     

Mechanism of the Class I KDPG aldolase

In vivo, 2-keto-3-deoxy-6-phosphogluconate (KDPG) aldolase catalyzes the reversible, stereospecific retro-aldol cleavage of KDPG to pyruvate and D-glyceraldehyde-3-phosphate. The enzyme is a lysine-dependent (Class I) aldolase that functions through the intermediacy of a Schiff base. Here, we propose a mechanism for this enzyme based on crystallographic studies of wild-type and mutant aldolases. The three dimensional structure of KDPG aldolase from the thermophile Thermotoga maritima was determined to 1.9A. The structure is the standard alpha/beta barrel observed for all Class I aldolases. At the active site Lys we observe clear density for a pyruvate Schiff base. Density for a sulfate ion bound in a conserved cluster of residues close to the Schiff base is also observed. We have also determined the structure of a mutant of Escherichia coli KDPG aldolase in which the proposed general acid/base catalyst has been removed (E45N). One subunit of the trimer contains density suggesting a trapped pyruvate carbinolamine intermediate. All three subunits contain a phosphate ion bound in a location effectively identical to that of the sulfate ion bound in the T. maritima enzyme. The sulfate and phosphate ions experimentally locate the putative phosphate binding site of the aldolase and, together with the position of the bound pyruvate, facilitate construction of a model for the full-length KDPG substrate complex. The model requires only minimal positional adjustments of the experimentally determined covalent intermediate and bound anion to accommodate full-length substrate. The model identifies the key catalytic residues of the protein and suggests important roles for two observable water molecules. The first water molecule remains bound to the enzyme during the entire catalytic cycle, shuttling protons between the catalytic glutamate and the substrate. The second water molecule arises from dehydration of the carbinolamine and serves as the nucleophilic water during hydrolysis of the enzyme-product Schiff base. The second water molecule may also mediate the base-catalyzed enolization required to form the carbon nucleophile, again bridging to the catalytic glutamate. Many aspects of this mechanism are observed in other Class I aldolases and suggest a mechanistically and, perhaps, evolutionarily related family of aldolases distinct from the N-acetylneuraminate lyase (NAL) family.     

A crystallographic model for azurin a 3 A resolution.

The structure of the blue copper protein azurin (M_r 14,000) from Pseudomonas aeruginosa has been determined from a 3.0 Å resolution electron density map computed with phases based on a uranyl derivative to 3 Å resolution and a platinum derivative to 3.7 Å. Interpretation of the somewhat noisy map was based on comparison of the density of the four molecules in the asymmetric unit with their averaged density. The polypeptide chain folds into an eight-strand β barrel with an additional flap containing a short helix. The copper atom is bound at one end and on the inside of the barrel, probably to a cysteine, a methionine, and two histidine residues.     

Effect of external electrostatic field on the stability of β sheet structures

To explore the effect of an external electrostatic field (EEF) on the stability of protein conformations, the molecular dynamic modeling approach was applied to evaluate the effect of an EEF along the x or y direction on a water cluster containing a parallel or antiparallel β sheet structure. The β sheet structure contained two strands with a (Gly)₃ sequence separated by a distance d along the x direction. The mean forces between the two strands along the x direction were computed from the trajectories of molecular dynamics simulations. In the absence of the EEF, the forces between the two strands in vacuum were repulsive and attractive in the parallel and antiparallel β sheet structures, respectively. In contrast, the mean forces between the two strands in water were attractive in both the parallel and antiparallel β sheet structures. This is because the electric interactions between the two strands were shielded by water, and the hydrophobic effect dominated the interaction between the two strands. When an EEF >50 MV/cm was applied to the water cluster, the attractive force between the two strands in the parallel and antiparallel β sheet structures decreased and increased, respectively. Further, the binding affinity between the two strands in the parallel and antiparallel β sheet structures also decreased and increased, respectively. This is because the large EEF leads to dielectric saturation, and consequently reduces the effects of the dielectric shielding and hydrophobic interactions. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 861–870, 2014.     

Residues in a conserved α-helical segment are required for cleavage but not secretion of an Escherichia coli serine protease autotransporter passenger domain

Autotransporters are a superfamily of virulence factors produced by Gram-negative bacteria that are comprised of an N-terminal extracellular domain (passenger domain) and a C-terminal β barrel domain (β domain) that resides in the outer membrane (OM). The β domain promotes the translocation of the passenger domain across the OM by an unknown mechanism. Available evidence indicates that an α-helical segment that spans the passenger domain-β domain junction is embedded inside the β domain at an early stage of assembly. Following its secretion, the passenger domain of the serine protease autotransporters of the Enterobacteriaceae (SPATEs) and the pertactin family of Bordetella pertussis autotransporters is released from the β domain through an intrabarrel autoproteolytic cleavage of the α-helical segment. Although the mutation of conserved residues that surround the cleavage site has been reported to impair both the translocation and cleavage of the passenger domain of a SPATE called Tsh, we show here that the mutation of the same residues in another SPATE (EspP) affects only passenger domain cleavage. Our results strongly suggest that the conserved residues are required to position the α-helical segment for the cleavage reaction and are not required to promote passenger domain secretion.