Biosynthesis of Al2O3 and europium-doped Al2O3 nanoparticle using Cymbopogon citratus (lemongrass) extract and its antibacterial property

Cymbopogon citratus-mediated pure aluminium oxide (Al₂O₃) and europium (Eu)-doped Al₂O₃ with different amounts of metal ion were prepared using a green synthesis method. Synthesised nanoparticles were characterised by ultraviolet (UV)-visible spectroscopy, photoluminescence (PL), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Synthesis of nanoparticles is confirmed by using UV-visible spectroscopy showing maximum absorption at 411 and 345 nm for Al₂O₃ and Eu-doped Al₂O₃, respectively. The antibacterial activity of prepared nanoparticles was evaluated against Pseudomonas aeruginosa, Streptococcus aureus, Escherichia coli and Klebsiella pneumoniae using a well-diffusion technique. The effect of pure Al₂O₃ and Eu-doped nanoparticles shows excellent results against P. aeruginosa, S. aureus, E. coli and K. pneumoniae.     

Biogenic approach to synthesize rod shaped Gd2O3 nanoparticles and its optimization using response surface methodology-Box–Behnken design model

The rare earth metal oxide nanoparticles such as gadolinium oxide nanoparticles (Gd₂O₃ NPs) have been synthesized by green synthesis process using methanolic extract of Moringa oleifera (M oleifera) peel. In this process, the Gd₂O₃ NPs formation was observed at 280–300 nm in UV–Vis spectroscopy. The XRD pattern of the synthesized Gd₂O₃ NPs was exactly matched with JCPDS No 3-065-3181which confirms the crystalline nature of Gd₂O₃ NPs. In addition, Energy-dispersive X-ray spectroscopy (EDX) analysis was stated that Gd and O elements were present as 70.31 and 29.69%, respectively in Gd₂O₃ NPs. The SEM and TEM analysis were said Gd₂O₃ NPs are in rod shape and 26 ± 2 nm in size. Further the synthesized Gd₂O₃ NPs were confirmed by X-ray photoemission spectroscopy (XPS). The synthesized Gd₂O₃ NPs were further examined for anti-fungal activity against Alternaria saloni (A saloni) and Sclerrotium rolfsii (S rolfsii) and it showed moderate activity. Also, Gd₂O₃ NPs evaluated as good antibacterial agent against different Gram +ve and Gram −ve bacteria. Moreover, the toxicity of the Gd₂O₃ NPs on red blood cells (RBCs) of the human blood was determined using hemolytic assay, the obtained results were stated the synthesized Gd₂O₃ NPs are nontoxic to the human erythrocytes. The photocatalytic activity against malachite green (MG) dye was tested and confirmed as 92% of dye was degraded within 2 hr by Gd₂O₃ NPs. The results were stated the green synthesized Gd₂O₃ NPs are good anti-fungal agents, nontoxic and we can use as a photocatalyst. Copyright © 2019 John Wiley & Sons, Ltd.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

Silver Nanoparticles Textured Oxide Thin Films for Surface Plasmon Enhanced Photovoltaic Properties

In this report, Ag nanoparticles were fabricated using the single-step glancing angle deposition (SS-GLAD) technique upon In₂O₃/TiO₂ thin film. Afterward, a detailed analysis was done for the two samples such as In₂O₃/TiO₂ thin film and In₂O₃/TiO₂ thin film/Ag nanoparticles, to inspect the field emission scanning electron microscopy (FESEM), energy-dispersive X-ray analysis (EDAX), X-ray diffraction (XRD), ultraviolet (UV) spectroscopy, and electrical properties. The reduction in bandgap energy for the samples of In₂O₃/TiO₂ thin film/Ag nanoparticles (~4.16 eV) in comparison with the In₂O₃/TiO₂ thin film (~4.28 eV) was due to trapped e–h recombination at the oxygen vacancies and electron transmission of Ag to the conduction band of the In₂O₃/TiO₂ thin films. Moreover, under irradiation of photons Ag nanoparticles generated inorganic Ag–O compound attributable to the localized surface plasmon resonance (LSPR). Also, a?~90% high transmittance,?~60% and?~25% low reflectance in UV and visible region, fill factor (FF) of 53%, as well as power conversion efficiency (PCE) of 15.12% was observed for In₂O₃/TiO₂ thin film/Ag nanoparticles than the In₂O₃/TiO₂ thin film. Therefore, the use of Ag nanoparticles textured In₂O₃/TiO₂ thin film–based device is a promising approach for the forthcoming photovoltaic applications.

     

Extracellular biosynthesis of iron oxide nanoparticles by Bacillus subtilis strains isolated from rhizosphere soil

The biological synthesis of nanoparticles is emerging as a potential method for nanoparticle synthesis due to its non-toxicity and simplicity. We report the ability of Bacillus subtilis strains isolated from rhizosphere soil to produce iron oxide nanoparticles. B. subtilis strains having the potential for the extracellular biosynthesis of Fe₃O₄nanoparticles were isolated from rhizosphere soil, identified and characterized. A bactericidal protein subtilin was isolated from all the isolates of B. subtilis, which is a characteristic for the species. The isolated subtilin was tested against the bacterial strain, E. coli. The supernatant of the bacterial culture was used for the synthesis of Fe₃O₄ nanoparticles. The formation of nanoparticles was assessed by using UV-Visible spectrophotometer. FTIR and SEM analysis were used in order to confirm the formation and size of the nanoparticles. Further, the effect of incubation time, pH, and temperature on the formation of Fe₃O₄ nanoparticles was studied. The successful synthesis of stabilized Fe₃O₄ nanoparticles, which was capped by the organic group, indicates the applicability of the isolated B. subtilis strain for the bulk synthesis of iron oxide nanoparticles.     

Properties Evaluation of a New MRI Contrast Agent Based on Gd-Loaded Nanoparticles

Nanosized materials of gadolinium oxide can provide high-contrast enhancement in magnetic resonance imaging (MRI). The aim of this research was to characterize a novel emulsion composed of a silicon-based nanocomposite polymer (NCP) and gadolinium (III) oxide (Gd₂O₃) nanoparticles. The size and morphological structure of this nanoparticle are determined by particle size analysis device (zeta sizer) and transmission electronic microscope. We determined composition of Gd₂O₃ nanoparticles with energy dispersive X-ray analysis (EDXA) and magnetic resonance signal by T ₁-weighted MRI. Cytotoxicity of Gd₂O₃ nanoparticles in SK-MEL-3 cancer cells was evaluated. Zeta sizer showed Gd₂O₃ nanoparticles to be 75 nm in size. EDXA indicated the two main chemical components of gadolinium-nanocomposite polymer emulsion: gadolinium and silicon and MRI also showed a significantly higher incremental relaxivity for Gd₂O₃ nanoparticles compared to Magnevist (conventional contrast agent). In such concentrations, the slope of R₁ relaxivity (1/T ₁) vs. concentration curve of Magnevist and Gd₂O₃ were 4.33, 7.98 s⁻¹ mM⁻¹. The slope of R₂ relaxivity (1/T ₂) vs. concentration curve of Magnevist and Gd₂O₃ were 5.06, 13.75 s⁻¹ mM⁻¹. No appreciable toxicity was observed with Gd₂O₃ nanoparticles. Gadolinium-nanocomposite polymer emulsion is well characterized and has potential as a useful contrast agent for magnetic resonance molecular imaging.     

Biological synthesis of platinum nanoparticles using Diopyros kaki leaf extract

The leaf extract of Diopyros kaki was used as a reducing agent in the ecofriendly extracellular synthesis of platinum nanoparticles from an aqueous H₂PtCl₆·6H₂O solution. A greater than 90% conversion of platinum ions to nanoparticles was achieved with a reaction temperature of 95°C and a leaf broth concentration of >10%. A variety of methods was used to characterize the platinum nanoparticles synthesized: inductively coupled plasma spectrometry, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy (FTIR). The average particle size ranged from 2 to 12 nm depending on the reaction temperature and concentrations of the leaf broth and PtCl₆ ²⁻. FTIR analysis suggests that platinum nanoparticle synthesis using Diopyros kaki is not an enzyme-mediated process. This is the first report of platinum nanoparticle synthesis using a plant extract.     

The Prospects of Metal Oxide Nanoradiosensitizers: The Effect of the Elemental Composition of Particles and Characteristics of Radiation Sources on Enhancement of the Adsorbed Dose

Nanoparticles with a high atomic number are of interest as radiosensitizers for radiation therapy of cancer. A variety of nanoparticles and radiation sources makes the challenge of selecting their optimal combinations to achieve maximum irradiation efficacy relevant. In this work, we calculated the values of the dose enhancement factors of elemental compositions of metal oxide nanoparticles (Al₂O₃, TiO₂, MnO₂, Fe₂O₃ and Fe₃O₄, NiO, GeO₂, ZrO₂, CeO₂, Gd₂O₃, Tm₂O₃, HfO₂, Ta₂O₅, and Bi₂O₃), as well as GeO₂ and HfO₂ doped with the rare-earth elements lanthanum or ytterbium in combination with monochromatic photons (1–500 keV) and X-ray radiation corresponding to the radiation of kilovoltage X-ray therapy machines. At a nanoparticle concentration of 10 mg/mL, the maximum values of the dose enhancement factors were from 1.03 to 2.55 for monochromatic radiation and from 1.01 to 2.33 for the studied X-ray spectra. Doping GeO₂ with 20% lanthanum or ytterbium led to an increase in the maximum value of dose enhancement factors by ~10%. Doping HfO₂ did not lead to significant changes in the value of dose-enhancement factors. Thus, all studied elemental compositions of nanoparticles, with the exception of Al₂O₃ (a dose enhancement factor ~1.02), are promising for application in kilovoltage X-ray radiotherapy. At the same time, the complex dependence of dose enhancement factors on the spectral composition of X-ray radiation requires detailed studies of the impact of irradiation conditions on the magnitude of the radiomodifying effect of nanoparticles.

     

Biosynthesis of metal and oxide nanoparticles using Lactobacilli from yoghurt and probiotic spore tablets

Green, low-cost, and reproducible Lactobacillus-mediated biosynthesis of metal and oxide nanoparticles are reported. Silver and titanium dioxide nanoparticles are synthesized using Lactobacillus sp. procured from yoghurt and probiotic tablets. The synthesis is performed akin to room temperature in the laboratory ambience. X-ray and transmission electron microscopy analyses are performed to ascertain the formation of metallic and oxide nanoparticles. Individual nanoparticles having the dimensions of 10–25 nm (n-Ag) and 10–70 nm (n-TiO₂) are found. The mechanism involved for the synthesis of metallic and oxide nanoparticles has also been discussed.     

Novel low-temperature synthesis of Y2–xO3:Eux3+ nanophosphor using combustion with thioglycerol as fuel for near-UV light-emitting diodes

Luminescent materials used in flat panel displays, compact fluorescent lamps, and light-emitting diodes require high purity, uniform particle size, clean surfaces, spherical shape, and dense morphology to ensure long-term stability. Y₂O₃:Eu³⁺ is a widely studied red phosphor known for its characteristic photoluminescence (PL) emission at 613 nm with near-UV excitation at 392 nm. Many methods have been explored to synthesize Y₂O₃:Eu³⁺ nanoparticles with exceptional purity, consistent phases, and uniform particle sizes. The aim is to synthesize particles with pristine surfaces, spherical shape, and compact morphology. This study focuses on the low-temperature synthesis and PL investigation of Y_2–xO₃:Eu_x³⁺ nanophosphors using combustion with thioglycerol as fuel. The results are compared with Y_2–xO₃:Eu_x³⁺ red nanophosphors synthesized using wet chemical and nitrate combustion methods. The PL characteristics of the Y_2–xO₃:Eu_x³⁺ nanophosphors were analyzed using PL emission spectroscopy, X-ray diffraction, and scanning electron microscopy. These findings highlight the advantageous properties of the synthesized nanophosphors, such as their suitability for solid-state lighting applications in the lamp industry as highly efficient red phosphors. The combination of high purity, uniform particle size, clean surfaces, spherical shape, and dense morphology contributes to their potential for long-term stability and reliable performance in lighting devices.     

An ethyl acetate sensor utilizing cataluminescence on Y2O3 nanoparticles

A cataluminescence (CTL) sensor using Y₂O₃ nanoparticles as the sensing materials was proposed for the determination of ethyl acetate. This ethyl acetate sensor showed high sensitivity and specificity at the optimal temperature of 264°C. Quantitative analysis was performed at a wavelength of 425 nm. The linear ranges of CTL intensity vs ethyl acetate concentrations were 2.0–250 ppm (r = 0.9965) and 250–6500 ppm (r = 0.9997) with a detection limit (3σ) of 0.5 ppm. There was no response or weak response when foreign substances such as formic acid, n‐hexane, toluene, acetic acid, benzene, and formaldehyde passing through the surface of Y₂O₃ nanoparticles. The sensor had a long lifetime more than 80 h with 3600 ppm ethyl acetate. It had been applied successfully to determine ethyl acetate in artificial air samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Improved degradation of lignocellulosic biomass pretreated by Fenton-like reaction using Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic nanoparticles

The ability of Fe₃O₄ Fenton-like reaction to produce glucose from lignocellulosic biomass was investigated. Fe₃O₄ magnetite nanoparticles were chemically synthesized from iron salts (a mixture of 1 M FeCl₂ and 2M FeCl₃) using an ammonia solution (30% NH₄OH). The synthesized Fe₃O₄ nanoparticles were further characterized by X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy, and transmission electron microscopy. Reed stems and rice straw biomasses pretreated with optimized Fenton-like reagents (Fe₃O₄ and H₂O₂) increased glucose production by 177 and 87%, respectively, compared to the control without the catalysts.     

K‐Ion Storage Enhancement in Sb2O3/Reduced Graphene Oxide Using Ether‐Based Electrolyte

In this work, an ether‐based electrolyte is adopted instead of conventional ester‐based electrolyte for an Sb₂O₃‐based anode and its enhancement mechanism is unveiled for K‐ion storage. The anode is fabricated by anchoring Sb₂O₃ onto reduced graphene oxide (Sb₂O₃‐RGO) and it exhibits better electrochemical performance using an ether‐based electrolyte than that using a conventional ester‐based electrolyte. By optimizing the concentration of the electrolyte, the Sb₂O₃‐RGO composite delivers a reversible specific capacity of 309 mAh g^?1 after 100 cycles at 100 mA g^?1. A high specific capacity of 201 mAh g^?1 still remains after 3300 cycles (111 days) at 500 mA g^?1 with almost no decay, exhibiting a longer cycle life compared with other metallic oxides. In order to further reveal the intrinsic mechanism, the energy changes for K atom migrating from surface into the sublayer of Sb₂O₃ are explored by density functional theory calculations. According to the result, the battery using the ether‐based electrolyte exhibits a lower energy change and migration barrier than those using other electrolytes for K‐ion, which is helpful to improve the K‐ion storage performance. It is believed that the work can provide deep understanding and new insight to enhance electrochemical performance using ether‐based electrolytes for KIBs.     

Facile and greener hydrothermal honey-based synthesis of Fe3O 4/Au core/shell nanoparticles for drug delivery applications

In the present research, we report a greener, faster, and low-cost synthesis of gold-coated iron oxide nanoparticles (Fe₃O₄/Au-NPs) by different ratios (1:1, 2:1, and 3:1 molar ratio) of iron oxide and gold with natural honey (0.5% w/v) under hydrothermal conditions for 20 minutes. Honey was used as the reducing and stabilizing agent, respectively. The nanoparticles were characterized by X-ray diffraction (XRD), UV-visible spectroscopy, field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDXS), transmission electron microscopy (TEM), selected area electron diffraction (SAED), vibrating sample magnetometer (VSM), and fourier transformed infrared spectroscopy (FT-IR). The XRD analysis indicated the presence of Fe₃O₄/Au-NPs, while the TEM images showed the formation of Fe₃O₄/Au-NPs with diameter range between 3.49 nm and 4.11 nm. The VSM study demonstrated that the magnetic properties were decreased in the Fe₃O₄/Au-NPs compared with the Fe₃O₄-NPs. The cytotoxicity threshold of Fe₃O₄/Au-NPs in the WEHI164 cells was determined by using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. It was demonstrated no significant toxicity in higher concentration up to 140.0 ppm which can become the main candidates for biological and biomedical applications, such as drug delivery.     

The function of chitosan/agarose biopolymer on Fe2O3 nanoparticles and evaluation of their effects on MCF-7 breast cancer cell line and expression of BCL2 and BAX genes

In recent decades, magnetic nanoparticles modified with biocompatible polymers have been recognized as a suitable tool for treating breast cancer. The aim of this research was to evaluate the function of chitosan/agarose-functionalized Fe₂O₃ nanoparticles on the MCF-7 breast cancer cell line and the expression of BCL2 and BAX genes. Free Fe₂O₃ nanoparticles were prepared by hydrothermal method. FTIR, XRD, SEM, DLS, VSM, and zeta potential analyses determined the size and morphological characteristics of the synthesized nanoparticles. The effect of Fe₂O₃ free nanoparticles and formulated Fe₂O₃ nanoparticles on induction of apoptosis was studied by double-dye Annexin V-FITC and PI. Also, the gene expression results using the PCR method displayed that Fe₂O₃ formulated nanoparticles induced BAX apoptosis by increasing the anti-apoptotic gene expression and decreasing the expression of pro-apoptotic gene BCL2, so the cell progresses to planned cell death. In addition, the results showed that the BAX/BCL2 ratio decreased significantly after treatment of MCF-7 cells with free Fe₂O₃ nanoparticles, and the BAX/BCL2 ratio for Fe₂O₃ formulated nanoparticles increased significantly. Also, to evaluate cell migration, the scratch test was performed, which showed a decrease in motility of MCF-7 cancer cells treated with Fe₂O₃ nanoparticles formulated with chitosan/agarose at concentrations of 10, 50, 100, and 200 μg/ml.     

Superior Oxygen Electrocatalysis on RuSex Nanoparticles for Rechargeable Air Cathodes

A one‐step, facile supercritical‐ethanol‐fluid synthesis of Se‐modified Ru nanoparticles nucleated on carbon defects is reported, and it is demonstrated that these nanoparticles provide, with >70% efficiency at 1 A g^?1, a highly active and reversible oxygen‐reduction/oxygen‐evolution reaction on an air cathode in a nonaqueous electrolyte. The Se modification not only prevents Ru oxidation during charge/discharge cycling, but also improves the catalytic activity by promoting Li₂O₂ versus Li₂O deposited on the Ru particles during discharge. A computational calculation with density functional theory supports the role of a larger electron transfer to the oxygen of Li₂O₂ adsorbed on a surface layer of RuSe_2?δ than on a surface layer of RuO₂, thereby shifting the more stable adsorbent from Li₂O to Li₂O₂.     

Rapid biological synthesis of platinum nanoparticles using <Emphasis Type="Italic">Ocimum sanctum</Emphasis> for water electrolysis applications

The leaf extract of Ocimum sanctum was used as a reducing agent for the synthesis of platinum nanoparticles from an aqueous chloroplatinic acid (H₂PtCl₆·6H₂O). A greater conversion of platinum ions to nanoparticles was achieved by employing a tulsi leaf broth with a reaction temperature of 100 °C. Energy-dispersive absorption X-ray spectroscopy confirmed the platinum particles as major constituent in the reduction process. It is evident from scanning electron microscopy that the reduced platinum particles were found as aggregates with irregular shape. Fourier-transform infrared spectroscopy revealed that the compounds such as ascorbic acid, gallic acid, terpenoids, certain proteins and amino acids act as reducing agents for platinum ions reduction. X-ray diffraction spectroscopy suggested the associated forms of platinum with other molecules and the average particle size of platinum nanoparticle was 23 nm, calculated using Scherer equation. The reduced platinum showed similar hydrogen evolution potential and catalytic activity like pure platinum using linear scan voltammetry. This environmentally friendly method of biological platinum nanoparticles production increases the rates of synthesis faster which can potentially be used in water electrolysis applications.     

Samarium doped titanium dioxide nanoparticles as theranostic agents in radiation therapy

PurposeTitanium dioxide nanoparticles (TiO₂ NPs) have been investigated for their role as radiosensitisers for radiation therapy. The study aims to increase the efficiency of these NPs by synthesising them with samarium.MethodsSamarium-doped TiO₂ NPs (Ti(Sm)O₂ NPs) were synthesised using a solvothermal method. Transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS) were performed for characterising of the Ti(Sm)O₂ NPs. The intracellular uptake and cytotoxicity were assessed in vitro using A549 and DU145 cancer cell lines. Furthermore, the effect of dose enhancement and generation of reactive oxygen species (ROS) in response to 6 MV X-rays was evaluated. Additionally, the image contrast properties were investigated using computed tomography (CT) images.ResultsThe synthesised Ti(Sm)O₂ NPs were about 13 nm in diameter as determined by TEM. The XRD pattern of Ti(Sm)O₂ NPs was consistent with that of anatase-type TiO₂. EDS confirmed the presence of samarium in the nanoparticles. At 200 μg/ml concentration, no differences in cellular uptake and cytotoxicity were observed between TiO₂ NPs and Ti(Sm)O₂ NPs in both A549 and DU145 cells. However, the combination of Ti(Sm)O₂ NPs and X-rays elicited higher cytotoxic effect and ROS generation in the cells than that with TiO₂ NPs and X-rays. The CT numbers of Ti(Sm)O₂ NPs were systematically higher than that of TiO₂ NPs.ConclusionsThe Ti(Sm)O₂ NPs increased the dose enhancement of MV X-ray beams than that elicited by TiO₂ NPs. Samarium improved the efficiency of TiO₂ NPs as potential radiosensitising agent.     

Novel and efficient method for immobilization and stabilization of β-d-galactosidase by covalent attachment onto magnetic Fe3O4–chitosan nanoparticles

A novel and efficient immobilization of β-d-galactosidase from Aspergillus oryzae has been developed by using magnetic Fe₃O₄–chitosan (Fe₃O₄–CS) nanoparticles as support. The magnetic Fe₃O₄–CS nanoparticles were prepared by electrostatic adsorption of chitosan onto the surface of Fe₃O₄ nanoparticles made through co-precipitation of Fe²⁺ and Fe³⁺. The resultant material was characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. β-d-Galactosidase was covalently immobilized onto the nanocomposites using glutaraldehyde as activating agent. The immobilization process was optimized by examining immobilized time, cross-linking time, enzyme concentration, glutaraldehyde concentration, the initial pH values of glutaraldehyde and the enzyme solution. As a result, the immobilized enzyme presented a higher storage, pH and thermal stability than the soluble enzyme. Galactooligosaccharide was formed with lactose as substrate by using the immobilized enzyme as biocatalyst, and a maximum yield of 15.5% (w/v) was achieved when about 50% lactose was hydrolyzed. Hence, the magnetic Fe₃O₄–chitosan nanoparticles are proved to be an effective support for the immobilization of β-d-galactosidase.     

Biotransformation of hexavalent chromium into extracellular chromium(III) oxide nanoparticles using <Emphasis Type="Italic">Schwanniomyces occidentalis</Emphasis>

Objectives

To demonstrate biotransformation of toxic Cr(VI) ions into Cr₂O₃ nanoparticles by the yeast Schwanniomyces occidentalis.

Results

Reaction mixtures containing S. occidentalis NCIM 3459 and Cr(VI) ions that were initially yellow turned green after 48 h incubation. The coloration was due to the synthesis of chromium (III) oxide nanoparticles (Cr₂O₃NPs). UV–Visible spectra of the reaction mixtures showed peaks at 445 and 600 nm indicating ⁴A_2g → ⁴T_1g and ⁴A_2g → ⁴T_2g transitions in Cr₂O₃, respectively. FTIR profiles suggested the involvement of carboxyl and amide groups in nanoparticle synthesis and stabilization. The Cr₂O₃NPs ranged between 10 and 60 nm. Their crystalline nature was evident from the selective area electron diffraction and X-ray diffraction patterns. Energy dispersive spectra confirmed the chemical composition of the nanoparticles. These biogenic nanoparticles could find applications in different fields.

Conclusions

S. occidentalis mediated biotransformation of toxic Cr(VI) ions into crystalline extracellular Cr₂O₃NPs under benign conditions.