Functional analysis of internal transcribed spacer 2 of Saccharomyces cerevisiae ribosomal DNA.

Using the previously described "tagged ribosome" (pORCS) system for in vivo mutational analysis of yeast rDNA, we show that small deletions in the 5'-terminal portion of ITS2 completely block maturation of 26 S rRNA at the level of the 29 SB precursor (5.8 S rRNA-ITS2-26 S rRNA). Various deletions in the 3'-terminal part, although severely reducing the efficiency of processing, still allow some mature 26 S rRNA to be formed. On the other hand, none of the ITS2 deletions affect the production of mature 17 S rRNA. Since all of the deletions severely disturb the recently proposed secondary structure of ITS2, these findings suggest an important role for higher order structure of ITS2 in processing. Analysis of the effect of complete or partial replacement of S. cerevisiae ITS2 with its counterpart sequences from Saccharomyces rosei or Hansenula wingei, points to helix V of the secondary structure model as an important element for correct and efficient processing. Direct mutational analysis shows that disruption of base-pairing in the middle of helix V does not detectably affect 26 S rRNA formation. In contrast, introduction of clustered point mutations at the apical end of helix V that both disrupt base-pairing and change the sequence of the loop, severely reduces processing. Since a mutant containing only point mutations in the sequence of the loop produces normal amounts of mature 26 S rRNA, we conclude that the precise (secondary and/or primary) structure at the lower end of helix V, but excluding the loop, is of crucial importance for efficient removal of ITS2.     

Identification of cis-acting elements involved in 3'-end formation of Saccharomyces cerevisiae 18S rRNA.

In yeast, the 3' end of mature 18S rRNA is generated by endonucleolytic cleavage of the 20S precursor at site D. Available data indicate that the major cis-acting elements required for this processing step are located in relatively close proximity to the cleavage site. To identify these elements, we have studied the effect of mutations in the mature 18S and ITS1 sequences neighboring site D on pre-rRNA processing in vivo. Using clustered point mutations, we found that alterations in the sequence spanning site D from position -5 in 18S rRNA to +6 in ITS1 reduced the efficiency of processing at this site to different extents as demonstrated by the lower level of the mature 18S rRNA and the increase in 20S pre-rRNA in cells expressing only mutant rDNA units. More detailed analysis revealed an important role for the residue located 2 nt upstream from site D (position -2), whereas sequence changes at position -1, +1, and +2 relative to site D had no effect. The data further demonstrate that the proposed base pairing between the 3' end of 18S rRNA and the 5' end of ITS1 is not important for efficient and accurate processing at site D, nor for the formation of functional 40S ribosomal subunits. These results were confirmed by analyzing the accumulation of the D-A2 fragment derived from the mutant 20S pre-rRNA in cells that lack the Xrn1p exonuclease responsible for its degradation. The latter results also showed that the accuracy of cleavage was affected by altering the spacer sequence directly downstream of site D but not by mutations in the 18S rRNA sequence preceding this site.     

Separate structural elements within internal transcribed spacer 1 of Saccharomyces cerevisiae precursor ribosomal RNA direct the formation of 17S and 26S rRNA.

Structural features of Internal Transcribed Spacer 1 (ITS1) that direct its removal from Saccharomyces cerevisiae pre-rRNA during processing were identified by an initial phylogenetic approach followed by in vivo mutational analysis of specific structural elements. We found that S. cerevisiae ITS1 can functionally be replaced by the corresponding regions from the yeasts Torulaspora delbrueckii, Kluyveromyces lactis and Hansenula wingei, indicating that structural elements required in cis for processing are evolutionarily conserved. Despite large differences in size, all ITS1 regions conform to the secondary structure proposed by Yeh et al. [Biochemistry 29 (1990) 5911-5918], showing five domains (I-V; 5'-->3') of which three harbour an evolutionarily highly conserved element. Removal of most of domain II, including its highly conserved element, did not affect processing. In contrast, highly conserved nucleotides directly downstream of processing site A2 in domain III play a major role in production of 17S, but not 26S rRNA. Domain IV and V are dispensable for 17S rRNA formation although an alternative, albeit inefficient, processing route to mature 17S rRNA may be mediated by a conserved region in domain IV. Each of these two domains is individually sufficient for efficient production of 26S rRNA, suggesting two independent processing pathways. We conclude that ITS1 is organized into two functionally and structurally distinct halves.     

Mutational analysis of an essential binding site for the U3 snoRNA in the 5' external transcribed spacer of yeast pre-rRNA.

The small nucleolar RNA U3 is essential for viability in yeast. We have previously shown that U3 can be cross-linked in vivo to the pre-rRNA in the 5' external transcribed spacer (ETS), at +470. This ETS region contains 10 nucleotides of perfect complementarity to U3. In a genetic background where the mutated rDNA is the only transcribed rDNA repeat, the deletion of the 10 nt complementary to U3 is lethal. Cells lacking the U3 complementary sequence in pre-rRNA fail to accumulate 18S rRNA: pre-rRNA processing is inhibited at sites A0 in the 5' ETS, A1 at the 5' end of 18S rRNA and A2 in ITS1. We show here that effects on processing at site A0 are specific for U3 and its associated proteins and are not seen on depletion of other snoRNP components. The deletion of the sequence complementary to U3 in the ETS therefore mimics all the known effects of the depletion of U3 in trans. This indicates that we have identified an essential U3 binding site on pre-rRNA, required in cis for the maturation of 18S rRNA.     

Mutational analysis of an essential binding site for the U3 snoRNA in the 5' external transcribed spacer of yeast pre-rRNA.

The small nucleolar RNA U3 is essential for viability in yeast. We have previously shown that U3 can be cross-linked in vivo to the pre-rRNA in the 5' external transcribed spacer (ETS), at +470. This ETS region contains 10 nucleotides of perfect complementarity to U3. In a genetic background where the mutated rDNA is the only transcribed rDNA repeat, the deletion of the 10 nt complementary to U3 is lethal. Cells lacking the U3 complementary sequence in pre-rRNA fail to accumulate 18S rRNA: pre-rRNA processing is inhibited at sites A0 in the 5' ETS, A1 at the 5' end of 18S rRNA and A2 in ITS1. We show here that effects on processing at site A0 are specific for U3 and its associated proteins and are not seen on depletion of other snoRNP components. The deletion of the sequence complementary to U3 in the ETS therefore mimics all the known effects of the depletion of U3 in trans. This indicates that we have identified an essential U3 binding site on pre-rRNA, required in cis for the maturation of 18S rRNA.     

The structure of the ITS2-proximal stem is required for pre-rRNA processing in yeast.

Accurate and efficient processing of pre-rRNA is critical to the accumulation of mature functional ribosomal subunits for maintenance of cell growth. Processing requires numerous factors which act in trans as well as RNA sequence/ structural elements which function in cis. To examine the latter, we have used directed mutagenesis and expression of mutated pre-rRNAs in yeast. Specifically, we tested requirements for formation of an ITS2-proximal stem on processing, a structure formed by an interaction between sequences corresponding to the 3' end of 5.8S rRNA and the 5' end of 25S. Pre-rRNA processing is inhibited in templates encoding mutations that prevent the formation of the ITS2-proximal stem. Compensatory, double mutations, which alter the sequence of this region but restore the structure of the stem, also restore processing, although at lower efficiency. This reduction in efficiency is reflected in decreased levels of mature 5.8S and 25S rRNA and increased levels of 35S pre-rRNA and certain processing intermediates. This phenotype is reminiscent of the biochemical depletion of U8 snoRNA in vertebrates for which the ITS2-proximal stem has been proposed as a potential site for interaction with U8 RNP. Thus, formation of the ITS2-proximal stem may be a requirement common to yeast and vertebrate pre-rRNA processing.     

The evolutionarily conserved protein Las1 is required for pre-rRNA processing at both ends of ITS2

Ribosome synthesis entails the formation of mature rRNAs from long precursor molecules, following a complex pre-rRNA processing pathway. Why the generation of mature rRNA ends is so complicated is unclear. Nor is it understood how pre-rRNA processing is coordinated at distant sites on pre-rRNA molecules. Here we characterized, in budding yeast and human cells, the evolutionarily conserved protein Las1. We found that, in both species, Las1 is required to process ITS2, which separates the 5.8S and 25S/28S rRNAs. In yeast, Las1 is required for pre-rRNA processing at both ends of ITS2. It is required for Rrp6-dependent formation of the 5.8S rRNA 3' end and for Rat1-dependent formation of the 25S rRNA 5' end. We further show that the Rat1-Rai1 5'-3' exoribonuclease (exoRNase) complex functionally connects processing at both ends of the 5.8S rRNA. We suggest that pre-rRNA processing is coordinated at both ends of 5.8S rRNA and both ends of ITS2, which are brought together by pre-rRNA folding, by an RNA processing complex. Consistently, we note the conspicuous presence of ~7- or 8-nucleotide extensions on both ends of 5.8S rRNA precursors and at the 5' end of pre-25S RNAs suggestive of a protected spacer fragment of similar length.     

Identification and functional analysis of two U3 binding sites on yeast pre-ribosomal RNA.

It has long been known that U3 can be isolated hydrogen bonded to pre-ribosomal RNAs, but the sites of interaction are poorly characterized. Here we show that yeast U3 can be cross-linked to 35S pre-rRNA both in deproteinized extracts and in living cells. The sites of cross-linking were localized to the 5' external transcribed spacer (ETS) and then identified at the nucleotide level. Two regions of U3 near the 5' end are cross-linked to pre-rRNA in vivo and in vitro; the evolutionarily conserved box A region and a 10 nucleotide (nt) sequence with perfect complementarity to an ETS sequence. Two in vivo cross-links are detected in the ETS, at +470, within the region complementary to U3, and at +655, close to the cleavage site at the 5' end of 18S rRNA. A tagged rDNA construct was used to follow the effects of mutations in the ETS in vivo. A small deletion around the +470 cross-linking site in the ETS prevents the synthesis of 18S rRNA. This region is homologous to the site of vertebrate ETS cleavage. We propose that this site may be evolutionarily conserved to direct the assembly of a pre-rRNA processing complex required for the cleavages that generate 18S rRNA.     

Identification of the binding site of Rlp7 on assembling 60S ribosomal subunits in Saccharomyces cerevisiae

Eukaryotic ribosome assembly requires over 200 assembly factors that facilitate rRNA folding, ribosomal protein binding, and pre-rRNA processing. One such factor is Rlp7, an essential RNA binding protein required for consecutive pre-rRNA processing steps for assembly of yeast 60S ribosomal subunits: exonucleolytic processing of 27SA₃ pre-rRNA to generate the 5′ end of 5.8S rRNA and endonucleolytic cleavage of the 27SB pre-rRNA to initiate removal of internal transcribed spacer 2 (ITS2). To better understand the functions of Rlp7 in 27S pre-rRNA processing steps, we identified where it crosslinks to pre-rRNA. We found that Rlp7 binds at the junction of ITS2 and the ITS2-proximal stem, between the 3′ end of 5.8S rRNA and the 5′ end of 25S rRNA. Consistent with Rlp7 binding to this neighborhood during assembly, two-hybrid and affinity copurification assays showed that Rlp7 interacts with other assembly factors that bind to or near ITS2 and the proximal stem. We used in vivo RNA structure probing to demonstrate that the proximal stem forms prior to Rlp7 binding and that Rlp7 binding induces RNA conformational changes in ITS2 that may chaperone rRNA folding and regulate 27S pre-rRNA processing. Our findings contradict the hypothesis that Rlp7 functions as a placeholder for ribosomal protein L7, from which Rlp7 is thought to have evolved in yeast. The binding site of Rlp7 is within eukaryotic-specific RNA elements, which are not found in bacteria. Thus, we propose that Rlp7 coevolved with these RNA elements to facilitate eukaryotic-specific functions in ribosome assembly and pre-rRNA processing.     

Neurospora crassa ribosomal DNA: sequence of internal transcribed spacer and comparison with N. intermedia and N. sitophila

Using [32P]DNA probes from a clone containing 17S, 5.8S and 26S rRNA of Neurospora crassa, the remainder of the repeat unit (RU) for ribosomal DNA (rDNA) has been cloned. Combining restriction analysis of the cloned DNA and restriction digests of genomic DNA, the RU was found to be 8.7 kb. The nucleotide sequence was determined for the internal transcribed spacer (ITS) regions one and two, for 5.8S rRNA and for portions of 17S and 26S rRNAs immediately flanking the ITS regions, and compared to the corresponding region of Saccharomyces carlsbergensis. In addition, a comparative restriction analysis of two other Neurospora species was performed using twelve restriction endonucleases. Genomic DNA blots of rDNA from N. intermedia and N. sitophila revealed rDNA RUs of 8.4 kb. The majority of differences in restriction patterns were confined to sequences outside the mature rRNA regions. However, one SmaI recognition site was found in 26S rRNA of N. crassa and N. sitophila but not in N. intermedia.     

Yeast Rnt1p is required for cleavage of the pre-ribosomal RNA in the 3' ETS but not the 5' ETS.

We have reexamined the role of yeast RNase III (Rnt1p) in ribosome synthesis. Analysis of pre-rRNA processing in a strain carrying a complete deletion of the RNT1 gene demonstrated that the absence of Rnt1p does not block cleavage at site A0 in the 5' external transcribed spacers (ETS), although the early pre-rRNA cleavages at sites A0, A1, and A2 are kinetically delayed. In contrast, cleavage in the 3' ETS is completely inhibited in the absence of Rnt1p, leading to the synthesis of a reduced level of a 3' extended form of the 25S rRNA. The 3' extended forms of the pre-rRNAs are consistent with the major termination at site T2 (+210). We conclude that Rnt1p is required for cleavage in the 3' ETS but not for cleavage at site A0. The sites of in vivo cleavage in the 3' ETS were mapped by primer extension. Two sites of Rnt1p-dependent cleavage were identified that lie on opposite sides of a predicted stem loop structure, at +14 and +49. These are in good agreement with the consensus Rnt1p cleavage site. Processing of the 3' end of the mature 25S rRNA sequence in wild-type cells was found to occur concomitantly with processing of the 5' end of the 5.8S rRNA, supporting previous proposals that processing in ITS1 and the 3' ETS is coupled.     

松口蘑与假松口蘑ITS序列测定和分析比较

对松口蘑和假松口蘑进行ITS序列测序,通过DNAStar软件比较分析,发现松口蘑与假松口蘑的5.8SrDNA序列完全一致,ITS1和ITS2呈现不同程度的多态性。松口蘑ITS序列长度为601bp,假松口蘑ITS序列长度为563bp。设计了扩增松口蘑和假松口蘑ITS1的特异性引物,能够快速地区别松口蘑与假松口蘑。     

古尼虫草与亚香棒虫草亲缘关系初探

目的：用分子生物学方法,对古尼虫草和亚香棒虫草进行研究,对其寄主昆虫COI（cytochrome oxidase subunit I,细胞色素氧化酶亚基I）和真菌ITS（Internal Transcribed Sequence,内转录间隔区）区的基因序列进行比较,以确定两者亲缘关系。方法：在古尼虫草和亚香棒虫草性状研究的基础上,对两者来源真菌ITS区和寄主昆虫COI基因进行了PCR扩增和序列测定,对序列进行比对分析,并与GenBank核酸序列数据库中的序列进行BLAST检索比对。结果：发现古尼虫草和亚香棒虫草的来源真菌ITS区和寄主昆虫COI基因序列均有较高相似度。结论：古尼虫草和亚香棒虫草有较近的亲缘关系。