Alterations in structure and properties of collagen network of osteoarthritic and repaired cartilage modify knee joint stresses

Organization of the collagen network is known to be different in healthy, osteoarthritic and repaired cartilage. The aim of the study was to investigate how the structure and properties of collagen network of cartilage modulate stresses in a knee joint with osteoarthritis or cartilage repair. Magnetic resonance imaging (MRI) at 1.5 T was conducted for a knee joint of a male subject. Articular cartilage and menisci in the knee joint were segmented, and a finite element mesh was constructed based on the two-dimensional section in sagittal projection. Then, the knee joint stresses were simulated under impact loads by implementing the structure and properties of healthy, osteoarthritic and repaired cartilage in the models. During the progression of osteoarthritis, characterized especially by the progressive increase in the collagen fibrillation from the superficial to the deeper layers, the stresses were reduced in the superficial zone of cartilage, while they were increased in and under menisci. Increased fibril network stiffness of repair tissue with randomly organized collagen fibril network reduced the peak stresses in the adjacent tissue and strains at the repair–adjacent cartilage interface. High collagen fibril strains were indicative of stress concentration areas in osteoarthritic and repaired cartilage. The collagen network orientation and stiffness controlled the stress distributions in healthy, osteoarthritic and repaired cartilage. The evaluation of articular cartilage function using clinical MRI and biomechanical modeling could enable noninvasive estimation of osteoarthritis progression and monitoring of cartilage repair. This study presents a step toward those goals.     

Contribution of postnatal collagen reorientation to depth-dependent mechanical properties of articular cartilage

The collagen fibril network is an important factor for the depth-dependent mechanical behaviour of adult articular cartilage (AC). Recent studies show that collagen orientation is parallel to the articular surface throughout the tissue depth in perinatal animals, and that the collagen orientations transform to a depth-dependent arcade-like structure in adult animals. Current understanding on the mechanobiology of postnatal AC development is incomplete. In the current paper, we investigate the contribution of collagen fibril orientation changes to the depth-dependent mechanical properties of AC. We use a composition-based finite element model to simulate in a 1-D confined compression geometry the effects of ten different collagen orientation patterns that were measured in developing sheep. In initial postnatal life, AC is mostly subject to growth and we observe only small changes in depth-dependent mechanical behaviour. Functional adaptation of depth-dependent mechanical behaviour of AC takes place in the second half of life before puberty. Changes in fibril orientation alone increase cartilage stiffness during development through the modulation of swelling strains and osmotic pressures. Changes in stiffness are most pronounced for small stresses and for cartilage adjacent to the bone. We hypothesize that postnatal changes in collagen fibril orientation induce mechanical effects that in turn promote these changes. We further hypothesize that a part of the depth-dependent postnatal increase in collagen content in literature is initiated by the depth-dependent postnatal increase in fibril strain due to collagen fibril reorientation.     

Anisotropy and inter-condyle heterogeneity of cartilage under large-strain shear

We were the first to examine the mechanical responses of skeletally mature bovine femoral cartilage under large-strain simple shear (up to ±20%) using a multiaxial shear testing device. Since shear loading is critical in both tissue failure and chondrocyte responses, we aimed to probe (1) anisotropy with respect to the split-line direction (principal alignment of the collagen fibers near the articulating surface), (2) heterogeneity between femoral condyles, and (3) the influence of local cartilage thickness. We harvested a total of 48 cuboid cartilage specimens from four bovine knee joints. With each specimen we applied shear strains both parallel and perpendicular to the local split-line direction at a rate of 75 μm/min and calculated the peak-to-peak shear stresses, shear strain–energy dissipation densities, and peak effective shear moduli. The Wilcoxon signed rank test revealed that the medial condyle was anisotropic in some mechanical measures at applied shear strains above 5%, while the lateral condyle was mechanically isotropic at all applied shear strains. The Kruskal–Wallis test revealed no significant differences in the median mechanical behavior of the lateral and medial condyles. Spearman׳s rank correlations revealed statistically significant negative monotonic correlations among thickness and most of our mechanical measures for both lateral and medial condyles at most applied strains and directions of applied shear. These results suggest that large-strain analyses account for nonlinear, anisotropic and location-dependent effects not fully realized at small strains. Our findings may inspire new experiments and models that consider anisotropy and heterogeneity of cartilage in ways previously ignored.     

Stresses in the local collagen network of articular cartilage: a poroviscoelastic fibril-reinforced finite element study

Osteoarthritis (OA) is a multifactorial disease, resulting in diarthrodial joint wear and eventually destruction. Swelling of cartilage, which is proportional to the amount of collagen damage, is an initial event of cartilage degeneration, so damage to the collagen fibril network is likely to be one of the earliest signs of OA cartilage degeneration. We propose that the local stresses and strains in the collagen fibrils, which cause the damage, cannot be determined dependably without taking the local arcade-like collagen-fibril structure into account. We investigate this using a poroviscoelastic fibril-reinforced FEA model. The constitutive fibril properties were determined by fitting numerical data to experimental results of unconfined compression and indentation tests on samples of bovine patellar articular cartilage. It was demonstrated that with this model the stresses and strains in the collagen fibrils can be calculated. It was also exhibited that fibrils with different orientations at the same location can be loaded differently, depending on the local architecture of the collagen network. To the best of our knowledge, the present model is the first that can account for these features. We conclude that the local stresses and strains in the articular cartilage are highly influenced by the local morphology of the collagen-fibril network.     

Depth-dependent analysis of the role of collagen fibrils, fixed charges and fluid in the pericellular matrix of articular cartilage on chondrocyte mechanics

The pericellular matrix of articular cartilage has been shown to regulate the mechanical environment of chondrocytes. However, little is known about the mechanical role of collagen fibrils in the pericellular matrix, and how fibrils might help modulate strains acting on chondrocytes when cartilage is loaded. The primary objective was to clarify the effect of pericellular collagen fibrils on cell volume changes and strains during cartilage loading. Secondary objectives were to investigate the effects of pericellular fixed charges and fluid on cell responses. A microstructural model of articular cartilage, in which chondrocytes and pericellular matrices were represented with depth-dependent structural and morphological properties, was created. The extracellular matrix and pericellular matrices were modeled as fibril-reinforced, biphasic materials with swelling capabilities, while chondrocytes were assumed to be isotropic and biphasic with swelling properties. Collagen fibrils in the extracellular matrix were represented with an arcade-like architecture, whereas pericellular fibrils were assumed to run tangential to the cell surface. In the early stages of a stress-relaxation test, pericellular fibrils were found to sensitively affect cell volume changes, even producing a reversal from increasing to decreasing cell volume with increasing fibril stiffness in the superficial zone. Consequently, steady-state volume of the superficial zone cell decreased with increasing pericellular fibril stiffness. Volume changes in the middle and deep zone chondrocytes were smaller and opposite to those observed in the superficial zone chondrocyte. An increase in the pericellular fixed charge density reduced cell volumes substantially in every zone. The sensitivity of cell volume changes to pericellular fibril stiffness suggests that pericellular fibrils play an important, and as of yet largely neglected, role in regulating the mechanical environment of chondrocytes, possibly affecting matrix synthesis during cartilage development and degeneration, and affecting biosynthetic responses associated with articular cartilage loading.     

Interrelationship of cartilage composition and chondrocyte mechanics after a partial meniscectomy in the rabbit knee joint – Experimental and numerical analysis

Site-specific and depth-dependent properties of cartilage were implemented within a finite element (FE) model to determine if compositional or structural changes in the tissue could explain site-specific alterations of chondrocyte deformations due to cartilage loading in rabbit knee joints 3 days after a partial meniscectomy (PM). Depth-dependent proteoglycan (PG) content, collagen content and collagen orientation in the cartilage extracellular matrix (ECM), and PG content in the pericellular matrix (PCM) were assessed with microscopic and spectroscopic methods. Patellar, femoral groove and samples from both the lateral and medial compartments of the femoral condyle and tibial plateau were extracted from healthy controls and from the partial meniscectomy group. For both groups and each knee joint site, axisymmetric FE models with measured properties were generated. Experimental cartilage loading was applied in the simulations and chondrocyte volumes were compared to the experimental values. ECM and PCM PG loss occurred within the superficial cartilage layer in the PM group at all locations, except in the lateral tibial plateau. Collagen content and orientation were not significantly altered due to the PM. The FE simulations predicted similar chondrocyte volume changes and group differences as obtained experimentally. Loss of PCM fixed charge density (FCD) decreased cell volume loss, as observed in the medial femur and medial tibia, whereas loss of ECM FCD increased cell volume loss, as seen in the patella, femoral groove and lateral femur. The model outcome, cell volume change, was also sensitive to applied tissue geometry, collagen fibril orientation and loading conditions.     

Three dimensional patient-specific collagen architecture modulates cartilage responses in the knee joint during gait

Site-specific variation of collagen fibril orientations can affect cartilage stresses in knee joints. However, this has not been confirmed by 3-D analyses. Therefore, we present a novel method for evaluation of the effect of patient-specific collagen architecture on time-dependent mechanical responses of knee joint cartilage during gait. 3-D finite element (FE) models of a human knee joint were created with the collagen architectures obtained from T₂ mapped MRI (patient-specific model) and from literature (literature model). The effect of accuracy of the implementation of collagen fibril architecture into the model was examined by using a submodel with denser FE mesh. Compared to the literature model, fibril strains and maximum principal stresses were reduced especially in the superficial/middle regions of medial tibial cartilage in the patient-specific model after the loading response of gait (up to ?413 and ?26%, respectively). Compared to the more coarsely meshed joint model, the patient-specific submodel demonstrated similar strain and stress distributions but increased values particularly in the superficial cartilage regions (especially stresses increased >60%). The results demonstrate that implementation of subject-specific collagen architecture of cartilage in 3-D modulates location- and time-dependent mechanical responses of human knee joint cartilage. Submodeling with more accurate implementation of collagen fibril architecture alters cartilage stresses particularly in the superficial/middle tissue.     

Elastic energy storage in human articular cartilage: estimation of the elastic modulus for type II collagen and changes associated with osteoarthritis.

The viscoelastic mechanical properties of normal and osteoarthritic articular were analyzed based on data reported by Kempson [in: Adult Articular Cartilage (1973)] and Silver et al. (Connect. Tissue Res., 2001b). Results of the analysis of tensile elastic stress-strain curves suggest that the elastic modulus of cartilage from the superficial zone is approximately 7.0 GPa parallel and 2.21 GPa perpendicular to the cleavage line pattern. Collagen fibril lengths in the superficial zone were found to be approximately 1265 microm parallel and 668 microm perpendicular to the cleavage line direction. The values for the elastic modulus and fibril lengths decreased with increased extent of osteoarthritis. The elastic modulus of type II collagen parallel to the cleavage line pattern in the superficial zone approaches that of type I collagen in tendon, suggesting that elastic energy storage occurs in the superficial zone due to the tensile pre-tension that exists in this region. Decreases in the elastic modulus associated with osteoarthritis reflect decreased ability of cartilage to store elastic energy, which leads to cartilage fibrillation and fissure formation. We hypothesize that under normal physiological conditions, collagen fibrils in cartilage function to store elastic energy associated with weight bearing and locomotion. Enzymatic cleavage of cartilage proteoglycans and collagen observed in osteoarthritis may lead to fibrillation and fissure formation as a result of impaired energy storage capability of cartilage.     

Collagenous network in cartilage of human femoral condyles. A light microscopic and scanning electron microscopic study

To determine the spatial arrangement of collagen fibrils in articular cartilage of the human femoral head, three healthy femoral heads, obtained at necropsy, were examined by light microscopy and scanning electron microscopy. Light microscopic observations revealed no collagen fibril organization. Scanning electron microscopic observations showed a fine fibrillar texture throughout the articular cartilage. At the articular surface, smooth and fibrillated areas were detectable. Underneath the articular surface, the collagen network in the superficial zone showed a tighter appearance when compared with the homogeneous collagen network of the matrix in the deeper zones. The calcified cartilage zone was well demarcated from the uncalcified cartilage. The arcade model of Benninghoff [Z. Zellforsch. Mikrosk. Anat. 2: 783-862 (1925)] could not be confirmed. It was concluded that the organization of collagen fibrils in hyaline cartilage shows a three-dimensional network of randomly oriented fibrils.     

Role of cartilage collagen fibrils networks in knee joint biomechanics under compression

Collagen fibrils networks in knee cartilage and menisci change in content and structure from a region to another. While resisting tension, they influence global joint response as well as local strains particularly at short-term periods. To investigate the role of fibrils networks in knee joint mechanics and in particular cartilage response, a novel model of the knee joint is developed that incorporates the cartilage and meniscus fibrils networks as well as depth-dependent properties in cartilage. The joint response under up to 2000 N compression is investigated for conditions simulating the absence in cartilage of deep fibrils normal to subchondral bone or superficial fibrils parallel to surface as well as localized split of cartilage at subchondral junction or localized damage to superficial fibrils at loaded areas. Deep vertical fibrils network in cartilage play a crucial role in stiffening (by 10%) global response and protecting cartilage by reducing large strains (from maximum of 102% to 38%), in particular at subchondral junction. Superficial horizontal fibrils protect the tissue mainly from excessive strains at superficial layers (from 27% to 8%). Local cartilage split at base disrupts the normal function of vertical fibrils at the affected areas resulting in higher strains.Deep fibrils, and to a lesser extent superficial fibrils, play dominant mechanical roles in cartilage response under transient compression. Any treatment modality attempting to repair or regenerate cartilage defects involving partial or full thickness osteochondral grafts should account for the crucial role of collagen fibrils networks and the demanding mechanical environment of the tissue.     

Importance of collagen orientation and depth-dependent fixed charge densities of cartilage on mechanical behavior of chondrocytes

The collagen network and proteoglycan matrix of articular cartilage are thought to play an important role in controlling the stresses and strains in and around chondrocytes, in regulating the biosynthesis of the solid matrix, and consequently in maintaining the health of diarthrodial joints. Understanding the detailed effects of the mechanical environment of chondrocytes on cell behavior is therefore essential for the study of the development, adaptation, and degeneration of articular cartilage. Recent progress in macroscopic models has improved our understanding of depth-dependent properties of cartilage. However, none of the previous works considered the effect of realistic collagen orientation or depth-dependent negative charges in microscopic models of chondrocyte mechanics. The aim of this study was to investigate the effects of the collagen network and fixed charge densities of cartilage on the mechanical environment of the chondrocytes in a depth-dependent manner. We developed an anisotropic, inhomogeneous, microstructural fibril-reinforced finite element model of articular cartilage for application in unconfined compression. The model consisted of the extracellular matrix and chondrocytes located in the superficial, middle, and deep zones. Chondrocytes were surrounded by a pericellular matrix and were assumed spherical prior to tissue swelling and load application. Material properties of the chondrocytes, pericellular matrix, and extracellular matrix were obtained from the literature. The loading protocol included a free swelling step followed by a stress-relaxation step. Results from traditional isotropic and transversely isotropic biphasic models were used for comparison with predictions from the current model. In the superficial zone, cell shapes changed from rounded to elliptic after free swelling. The stresses and strains as well as fluid flow in cells were greatly affected by the modulus of the collagen network. The fixed charge density of the chondrocytes, pericellular matrix, and extracellular matrix primarily affected the aspect ratios (height/width) and the solid matrix stresses of cells. The mechanical responses of the cells were strongly location and time dependent. The current model highlights that the collagen orientation and the depth-dependent negative fixed charge densities of articular cartilage have a great effect in modulating the mechanical environment in the vicinity of chondrocytes, and it provides an important improvement over earlier models in describing the possible pathways from loading of articular cartilage to the mechanical and biological responses of chondrocytes.     

Load sharing between solid and fluid phases in articular cartilage: I--Experimental determination of in situ mechanical conditions in a porcine knee.

The in situ mechanical conditions of cartilage in the articulated knee were quantified during joint loading. Six porcine knees were subjected to a 445 N compressive load while cartilage deformations and contact pressures were measured. From roentgenograms, cartilage thickness before and during loading allowed the calculation of tissue deformation on the lateral femoral condyle at different times during the loading process. Contact pressures on the articular surface were measured with miniature fiber-optic pressure transducers. Results showed that the medial side of the lateral femoral condyle had higher contact pressures, as well as deformations. To begin to correlate the pressures and resulting deformations, the intrinsic material properties of the cartilage on the lateral condyle were obtained from indentation tests. Data from four normal control specimens indicated that the aggregate modulus of the medial side was significantly higher than in other areas of the condyle. These experimental measures of the in situ mechanical conditions of articular cartilage can be combined with theoretical modeling to obtain valuable information about the relative contributions of the solid and fluid phases to supporting the applied load on the cartilage surface (see Part II).     

Knee joint kinematics during walking influences the spatial cartilage thickness distribution in the knee

The regional adaptation of knee cartilage morphology to the kinematics of walking has been suggested as an important factor in the evaluation of the consequences of alteration in normal gait leading to osteoarthritis. The purpose of this study was to investigate the association of spatial cartilage thickness distributions of the femur and tibia in the knee to the knee kinematics during walking. Gait data and knee MR images were obtained from 17 healthy volunteers (age 33.2 ± 9.8 years). Cartilage thickness maps were created for the femoral and tibial cartilage. Locations of thickest cartilage in the medial and lateral compartments in the femur and tibia were identified using a numerical method. The flexion-extension (FE) angle associated with the cartilage contact regions on the femur, and the anterior-posterior (AP) translation and internal-external (IE) rotation associated with the cartilage contact regions on the tibia at the heel strike of walking were tested for correlation with the locations of thickest cartilage. The locations of the thickest cartilage had relatively large variation (SD, 8.9°) and was significantly associated with the FE angle at heel strike only in the medial femoral condyle (R(2)=0.41, p<0.01). The natural knee kinematics and contact surface shapes seem to affect the functional adaptation of knee articular cartilage morphology. The sensitivity of cartilage morphology to kinematics at the knee during walking suggests that regional cartilage thickness variations are influenced by both loading and the number of loading cycles. Thus walking is an important consideration in the analysis of the morphological variations of articular cartilage, since it is the dominant cyclic activity of daily living. The sensitivity of cartilage morphology to gait kinematics is also important in understanding the etiology and pathomechanics of osteoarthritis.     

The relationship between split-line orientation and in vivo bone strain in galago (G. crassicaudatus) and macaque (Macaca mulatta and M. fascicularis) Mandibles

There is still disagreement concerning the functional significance of split-line patterns in bone. This study was undertaken to reexamine the mechanical forces hypothesis for split-line formation by comparing split-line patterns with in vivo mandibular bone strain patterns. The relationship between split-line orientation and in vivo stress and strain patterns on macaque and galago mandibles was examined during jaw opening and the power stroke of mastication and incision. An attempt was made to relate split-line orientation to the direction of tensile stress and strain along the primate mandible. In addition, we also investigated the alternative possibility that split-line orientation is related to the direction of low stresses (and strains) on the primate mandible. The results of this study showed that there was no consistent relationship between split-line orientation and the principal strains or stresses. Thus, split-lines did not run consistently in the direction of high or low stress and strain. Therefore, we have concluded that split-line orientation provides little useful information for inferring patterns of stress and strain in bone.     

Age-related changes in the tensile properties of human articular cartilage: a comparative study between the femoral head of the hip joint and the talus of the ankle joint

Specimens of articular cartilage from the superficial and mid-depth zones of the human femoral head and the talus of the ankle joint were tested in tension in planes parallel to the articular surface and parallel to the predominant orientation of the superficial collagen fibrils. The tensile fracture stress of cartilage from both the superficial and mid-depth zones of the femoral head decreased considerably with age. The superficial zone decreased from 33 MPa at 7 years to 10 MPa by the age of 90 years, while the mid-depth zone decreased from 32 MPa at 7 years to 2 MPa by the age of 85 years. In contrast the fracture stress of both levels of cartilage from the talus of the ankle did not decrease significantly with increasing age. The tensile stiffness at 10 MPa of both the superficial and mid-depth zones of the femoral head decreased with age. That of the superficial zone decreased from 150 MPa at 7 years to 80 MPa at 90 years, while the mid-depth zone decreased from 60 MPa at 7 years to 10 MPa at 60 years. The stiffness of talar cartilage from the superficial zone decreased by 20%, while that of the mid-depth zone showed a slight increase in stiffness at 10 MPa with increasing age. There was no significant decrease in the tensile stiffness at 1 MPa with age for either the femoral head or talar cartilage. Based on the results of previous studies it is possible to conclude that the decrease in tensile properties seen in the femoral head results from a deterioration in the tensile properties of the network of collagen fibrils. It is suggested that progressive fatigue failure, perhaps with associated changes in the structure of cartilage due to altered chondrocyte metabolism, causes the reduction in tensile properties with age. The results offer a potential explanation for the observation that osteoarthritis commonly occurs in the hip and knee joints at an increasing incidence as age increases, while the condition only rarely occurs in the ankle joint except as a secondary event to trauma.     

A computational algorithm to simulate disorganization of collagen network in injured articular cartilage

Cartilage defects are a known risk factor for osteoarthritis. Estimation of structural changes in these defects could help us to identify high risk defects and thus to identify patients that are susceptible for the onset and progression of osteoarthritis. Here, we present an algorithm combined with computational modeling to simulate the disorganization of collagen fibril network in injured cartilage. Several potential triggers for collagen disorganization were tested in the algorithm following the assumption that disorganization is dependent on the mechanical stimulus of the tissue. We found that tensile tissue stimulus alone was unable to preserve collagen architecture in intact cartilage as collagen network reoriented throughout the cartilage thickness. However, when collagen reorientation was based on both tensile tissue stimulus and tensile collagen fibril strains or stresses, the collagen network architecture was preserved in intact cartilage. Using the same approach, substantial collagen reorientation was predicted locally near the cartilage defect and particularly at the cartilage–bone interface. The developed algorithm was able to predict similar structural findings reported in the literature that are associated with experimentally observed remodeling in articular cartilage. The proposed algorithm, if further validated, could help to predict structural changes in articular cartilage following post-traumatic injury potentially advancing to impaired cartilage function.     

Lectin-binding in normal and osteoarthrotic articular cartilage from STR/1N-mouse knee joints

Fluorescein-isothiocyanate (FITC) labeled lectins were used to study the distribution pattern of specific binding-sites in histological sections of normal and osteoarthrotic articular cartilage from the mouse knee joint. Male inbred mice of the STR/1N-strain develop spontaneous arthrotic articular cartilage lesions on the medial condyle of tibia and femur. The varus-deformity of the knee joint leads to a recurrent medial patellar luxation with osteoarthrotic defects on the medial part of the facies patellaris femoris. It was demonstrated that the lectin staining pattern of osteoarthrotic articular cartilage, especially on the facies patellaris femoris, was different from that of normal articular cartilage. The differences in lectin staining corresponded to those observed between normal and fibrillated articular cartilage from human patellae. The normal articular cartilage of the mouse knee joint possessed lectin binding-sites for Concanavalin A (ConA) and wheat germ agglutinin (WGA), but not for Ulex europaeus agglutinin (UEA), soy bean agglutinin (SBA) and peanut agglutinin (PNA). In addition to the completely changed distribution pattern of ConA and WGA in osteoarthrotic cartilage, SBA, PNA and UEA developed distinct staining patterns particular to the fibrillated areas of arthrotic cartilage. The increased lectin-binding to arthrotic articular cartilage may be due to unmasking of sugars in the course of bondage breakdown in fibrillated cartilage or the production of pathological glycoproteins. It is evident that lectins can demonstrate minute differences between normal and arthrotic cartilage and it is concluded, therefore, that lectins are sensitive and specific tools for the study of degenerative joint diseases.     

The Mechanical Behaviour of Chondrocytes Predicted with a Micro-structural Model of Articular Cartilage

The integrity of articular cartilage depends on the proper functioning and mechanical stimulation of chondrocytes, the cells that synthesize extracellular matrix and maintain tissue health. The biosynthetic activity of chondrocytes is influenced by genetic factors, environmental influences, extracellular matrix composition, and mechanical factors. The mechanical environment of chondrocytes is believed to be an important determinant for joint health, and chondrocyte deformation in response to mechanical loading is speculated to be an important regulator of metabolic activity. In previous studies of chondrocyte deformation, articular cartilage was described as a biphasic material consisting of a homogeneous, isotropic, linearly elastic solid phase, and an inviscid fluid phase. However, articular cartilage is known to be anisotropic and inhomogeneous across its depth. Therefore, isotropic and homogeneous models cannot make appropriate predictions for tissue and cell stresses and strains. Here, we modelled articular cartilage as a transversely isotropic, inhomogeneous (TI) material in which the anisotropy and inhomogeneity arose naturally from the microstructure of the depth-dependent collagen fibril orientation and volumetric fraction, as well as the chondrocyte shape and volumetric fraction. The purpose of this study was to analyse the deformation behaviour of chondrocytes using the TI model of articular cartilage. In order to evaluate our model against experimental results, we simulated indentation and unconfined compression tests for nominal compressions of 15%. Chondrocyte deformations were analysed as a function of location within the tissue. The TI model predicted a non-uniform behaviour across tissue depth: in indentation testing, cell height decreased by 43% in the superficial zone and between 11 and 29% in the deep zone. In unconfined compression testing, cell height decreased by 32% in the superficial zone, 25% in the middle, and 18% in the deep zones. This predicted non-uniformity is in agreement with experimental studies. The novelty of this study is the use of a cartilage material model accounting for the intrinsic inhomogeneity and anisotropy of cartilage caused by its microstructure.     

Cartilage Fibrils of Mammals are Biochemically Heterogeneous: Differential Distribution of Decorin and Collagen IX

Cartilage fibrils contain collagen II as the major constituent, but the presence of additional components, minor collagens, and noncollagenous glycoproteins is thought to be crucial for modulating several fibril properties. We have examined the distribution of two fibril constituents—decorin and collagen IX—in samples of fibril fragments obtained after bovine cartilage homogenization. Decorin was preferentially associated with a population of thicker fibril fragments from adult articular cartilage, but was not present on the thinnest fibrils. The binding was specific for the gap regions of the fibrils, and depended on the decorin core protein. Collagen IX, by contrast, predominated in the population with the thinnest fibrils, and was scarce on wider fibrils. Double-labeling experiments demonstrated the coexistence of decorin and collagen IX in some fibrils of intermediate diameter, although most fibril fragments from adult cartilage were strongly positive for one component and lacked the other. Fibril fragments from fetal epiphyseal cartilage showed a different pattern, with decorin and collagen IX frequently colocalized on fragments of intermediate and large diameters. Hence, the presence of collagen IX was not exclusive for fibrils of small diameter. These results establish that articular cartilage fibrils are biochemically heterogeneous. Different populations of fibrils share collagen II, but have distinct compositions with respect to macromolecules defining their surface properties.     

Of Mice,Men and Elephants: The Relation between Articular Cartilage Thickness and Body Mass

Mammalian articular cartilage serves diverse functions, including shock absorption, force transmission and enabling low-friction joint motion. These challenging requirements are met by the tissue’s thickness combined with its highly specific extracellular matrix, consisting of a glycosaminoglycan-interspersed collagen fiber network that provides a unique combination of resilience and high compressive and shear resistance. It is unknown how this critical tissue deals with the challenges posed by increases in body mass. For this study, osteochondral cores were harvested post-mortem from the central sites of both medial and lateral femoral condyles of 58 different mammalian species ranging from 25 g (mouse) to 4000 kg (African elephant). Joint size and cartilage thickness were measured and biochemical composition (glycosaminoclycan, collagen and DNA content) and collagen cross-links densities were analyzed. Here, we show that cartilage thickness at the femoral condyle in the mammalian species investigated varies between 90 µm and 3000 µm and bears a negative allometric relationship to body mass, unlike the isometric scaling of the skeleton. Cellular density (as determined by DNA content) decreases with increasing body mass, but gross biochemical composition is remarkably constant. This however need not affect life-long performance of the tissue in heavier mammals, due to relatively constant static compressive stresses, the zonal organization of the tissue and additional compensation by joint congruence, posture and activity pattern of larger mammals. These findings provide insight in the scaling of articular cartilage thickness with body weight, as well as in cartilage biochemical composition and cellularity across mammalian species. They underscore the need for the use of appropriate in vivo models in translational research aiming at human applications.