共查询到20条相似文献,搜索用时 15 毫秒
1.
Jemanesh K. Haile Amidou N’Diaye Fran Clarke John Clarke Ron Knox Jessica Rutkoski Filippo M. Bassi Curtis J. Pozniak 《Molecular breeding : new strategies in plant improvement》2018,38(6):75
The prediction accuracies of genomic selection depend on several factors, including the genetic architecture of target traits, the number of traits considered at a given time, and the statistical models. Here, we assessed the potential of single-trait (ST) and multi-trait (MT) genomic prediction models for durum wheat on yield and quality traits using a breeding panel (BP) of 170 varieties and advanced breeding lines, and a doubled-haploid (DH) population of 154 lines. The two populations were genotyped with the Infinium iSelect 90K SNP assay and phenotyped for various traits. Six ST-GS models (RR-BLUP, G-BLUP, BayesA, BayesB, Bayesian LASSO, and RKHS) and three MT prediction approaches (MT-BayesA, MT-Matrix, and MT-SI approaches which use economic selection index as a trait value) were applied for predicting yield, protein content, gluten index, and alveograph measures. The ST prediction accuracies ranged from 0.5 to 0.8 for the various traits and models and revealed comparable prediction accuracies for most of the traits in both populations, except BayesA and BayesB, which better predicted gluten index, tenacity, and strength in the DH population. The MT-GS models were more accurate than the ST-GS models only for grain yield in the BP. Using BP as a training set to predict the DH population resulted in poor predictions. Overall, all the six ST-GS models appear to be applicable for GS of yield and gluten strength traits in durum wheat, but we recommend the simple computational models RR-BLUP or G-BLUP for predicating single trait and MT-SI for predicting yield and protein simultaneously. 相似文献
2.
Megan M Rolf Dorian J Garrick Tara Fountain Holly R Ramey Robert L Weaber Jared E Decker E John Pollak Robert D Schnabel Jeremy F Taylor 《遗传、选种与进化》2015,47(1)
Background
While several studies have examined the accuracy of direct genomic breeding values (DGV) within and across purebred cattle populations, the accuracy of DGV in crossbred or multi-breed cattle populations has been less well examined. Interest in the use of genomic tools for both selection and management has increased within the hybrid seedstock and commercial cattle sectors and research is needed to determine their efficacy. We predicted DGV for six traits using training populations of various sizes and alternative Bayesian models for a population of 3240 crossbred animals. Our objective was to compare alternate models with different assumptions regarding the distributions of single nucleotide polymorphism (SNP) effects to determine the optimal model for enhancing feasibility of multi-breed DGV prediction for the commercial beef industry.Results
Realized accuracies ranged from 0.40 to 0.78. Randomly assigning 60 to 70% of animals to training (n ≈ 2000 records) yielded DGV accuracies with the smallest coefficients of variation. Mixture models (BayesB95, BayesCπ) and models that allow SNP effects to be sampled from distributions with unequal variances (BayesA, BayesB95) were advantageous for traits that appear or are known to be influenced by large-effect genes. For other traits, models differed little in prediction accuracy (~0.3 to 0.6%), suggesting that they are mainly controlled by small-effect loci.Conclusions
The proportion (60 to 70%) of data allocated to training that optimized DGV accuracy and minimized the coefficient of variation of accuracy was similar to large dairy populations. Larger effects were estimated for some SNPs using BayesA and BayesB95 models because they allow unequal SNP variances. This substantially increased DGV accuracy for Warner-Bratzler Shear Force, for which large-effect quantitative trait loci (QTL) are known, while no loss in accuracy was observed for traits that appear to follow the infinitesimal model. Large decreases in accuracy (up to 0.07) occurred when SNPs that presumably tag large-effect QTL were over-regressed towards the mean in BayesC0 analyses. The DGV accuracies achieved here indicate that genomic selection has predictive utility in the commercial beef industry and that using models that reflect the genomic architecture of the trait can have predictive advantages in multi-breed populations.Electronic supplementary material
The online version of this article (doi:10.1186/s12711-015-0106-8) contains supplementary material, which is available to authorized users. 相似文献3.
Prediction accuracies of estimated breeding values for economically important traits are expected to benefit from genomic information. Single nucleotide polymorphism (SNP) panels used in genomic prediction are increasing in density, but the Markov Chain Monte Carlo (MCMC) estimation of SNP effects can be quite time consuming or slow to converge when a large number of SNPs are fitted simultaneously in a linear mixed model. Here we present an EM algorithm (termed “fastBayesA”) without MCMC. This fastBayesA approach treats the variances of SNP effects as missing data and uses a joint posterior mode of effects compared to the commonly used BayesA which bases predictions on posterior means of effects. In each EM iteration, SNP effects are predicted as a linear combination of best linear unbiased predictions of breeding values from a mixed linear animal model that incorporates a weighted marker-based realized relationship matrix. Method fastBayesA converges after a few iterations to a joint posterior mode of SNP effects under the BayesA model. When applied to simulated quantitative traits with a range of genetic architectures, fastBayesA is shown to predict GEBV as accurately as BayesA but with less computing effort per SNP than BayesA. Method fastBayesA can be used as a computationally efficient substitute for BayesA, especially when an increasing number of markers bring unreasonable computational burden or slow convergence to MCMC approaches. 相似文献
4.
Guo Z Tucker DM Lu J Kishore V Gay G 《TAG. Theoretical and applied genetics. Theoretische und angewandte Genetik》2012,124(2):261-275
In comparison to conventional marker-assisted selection (MAS), which utilizes only a subset of genetic markers associated
with a trait to predict breeding values (BVs), genome-wide selection (GWS) improves prediction accuracies by incorporating
all markers into a model simultaneously. This strategy avoids risks of missing quantitative trait loci (QTL) with small effects.
Here, we evaluated the accuracy of prediction for three corn flowering traits days to silking, days to anthesis, and anthesis-silking
interval with GWS based on cross-validation experiments using a large data set of 25 nested association mapping populations
in maize (Zea mays). We found that GWS via ridge regression-best linear unbiased prediction (RR-BLUP) gave significantly higher predictions
compared to MAS utilizing composite interval mapping (CIM). The CIM method may be selected over multiple linear regression
to decrease over-estimations of the efficiency of GWS over a MAS strategy. The RR-BLUP method was the preferred method for
estimating marker effects in GWS with prediction accuracies comparable to or greater than BayesA and BayesB. The accuracy
with RR-BLUP increased with training sample proportion, marker density, and heritability until it reached a plateau. In general,
gains in accuracy with RR-BLUP over CIM increased with decreases of these factors. Compared to training sample proportion,
the accuracy of prediction with RR-BLUP was relatively insensitive to marker density. 相似文献
5.
Accuracies of genomic prediction for twenty economically important traits in Chinese Simmental beef cattle 总被引:1,自引:0,他引:1
B. Zhu P. Guo Z. Wang W. Zhang Y. Chen L. Zhang H. Gao Z. Wang X. Gao L. Xu J. Li 《Animal genetics》2019,50(6):634-643
Genomic prediction has been widely utilized to estimate genomic breeding values (GEBVs) in farm animals. In this study, we conducted genomic prediction for 20 economically important traits including growth, carcass and meat quality traits in Chinese Simmental beef cattle. Five approaches (GBLUP, BayesA, BayesB, BayesCπ and BayesR) were used to estimate the genomic breeding values. The predictive accuracies ranged from 0.159 (lean meat percentage estimated by BayesCπ) to 0.518 (striploin weight estimated by BayesR). Moreover, we found that the average predictive accuracies across 20 traits were 0.361, 0.361, 0.367, 0.367 and 0.378, and the averaged regression coefficients were 0.89, 0.86, 0.89, 0.94 and 0.95 for GBLUP, BayesA, BayesB, BayesCπ and BayesR respectively. The genomic prediction accuracies were mostly moderate and high for growth and carcass traits, whereas meat quality traits showed relatively low accuracies. We concluded that Bayesian regression approaches, especially for BayesR and BayesCπ, were slightly superior to GBLUP for most traits. Increasing with the sizes of reference population, these two approaches are feasible for future application of genomic selection in Chinese beef cattle. 相似文献
6.
Frank Technow Albrecht E. Melchinger 《TAG. Theoretical and applied genetics. Theoretische und angewandte Genetik》2013,126(4):1133-1143
Bayesian methods are a popular choice for genomic prediction of genotypic values. The methodology is well established for traits with approximately Gaussian phenotypic distribution. However, numerous important traits are of dichotomous nature and the phenotypic counts observed follow a Binomial distribution. The standard Gaussian generalized linear models (GLM) are not statistically valid for this type of data. Therefore, we implemented Binomial GLM with logit link function for the BayesB and Bayesian GBLUP genomic prediction methods. We compared these models with their standard Gaussian counterparts using two experimental data sets from plant breeding, one on female fertility in wheat and one on haploid induction in maize, as well as a simulated data set. With the aid of the simulated data referring to a bi-parental population of doubled haploid lines, we further investigated the influence of training set size (N), number of independent Bernoulli trials for trait evaluation (n i ) and genetic architecture of the trait on genomic prediction accuracies and abilities in general and on the relative performance of our models. For BayesB, we in addition implemented finite mixture Binomial GLM to account for overdispersion. We found that prediction accuracies increased with increasing N and n i . For the simulated and experimental data sets, we found Binomial GLM to be superior to Gaussian models for small n i , but that for large n i Gaussian models might be used as ad hoc approximations. We further show with simulated and real data sets that accounting for overdispersion in Binomial data can markedly increase the prediction accuracy. 相似文献
7.
《Animal : an international journal of animal bioscience》2014,8(4):520-528
Genomic prediction utilizes single nucleotide polymorphism (SNP) chip data to predict animal genetic merit. It has the advantage of potentially capturing the effects of the majority of loci that contribute to genetic variation in a trait, even when the effects of the individual loci are very small. To implement genomic prediction, marker effects are estimated with a training set, including individuals with marker genotypes and trait phenotypes; subsequently, genomic estimated breeding values (GEBV) for any genotyped individual in the population can be calculated using the estimated marker effects. In this study, we aimed to: (i) evaluate the potential of genomic prediction to predict GEBV for nematode resistance traits and BW in sheep, within and across populations; (ii) evaluate the accuracy of these predictions through within-population cross-validation; and (iii) explore the impact of population structure on the accuracy of prediction. Four data sets comprising 752 lambs from a Scottish Blackface population, 2371 from a Sarda×Lacaune backcross population, 1000 from a Martinik Black-Belly×Romane backcross population and 64 from a British Texel population were used in this study. Traits available for the analysis were faecal egg count for Nematodirus and Strongyles and BW at different ages or as average effect, depending on the population. Moreover, immunoglobulin A was also available for the Scottish Blackface population. Results show that GEBV had moderate to good within-population predictive accuracy, whereas across-population predictions had accuracies close to zero. This can be explained by our finding that in most cases the accuracy estimates were mostly because of additive genetic relatedness between animals, rather than linkage disequilibrium between SNP and quantitative trait loci. Therefore, our results suggest that genomic prediction for nematode resistance and BW may be of value in closely related animals, but that with the current SNP chip genomic predictions are unlikely to work across breeds. 相似文献
8.
Calus MP 《Animal : an international journal of animal bioscience》2010,4(2):157-164
Animal breeding faces one of the most significant changes of the past decades - the implementation of genomic selection. Genomic selection uses dense marker maps to predict the breeding value of animals with reported accuracies that are up to 0.31 higher than those of pedigree indexes, without the need to phenotype the animals themselves, or close relatives thereof. The basic principle is that because of the high marker density, each quantitative trait loci (QTL) is in linkage disequilibrium (LD) with at least one nearby marker. The process involves putting a reference population together of animals with known phenotypes and genotypes to estimate the marker effects. Marker effects have been estimated with several different methods that generally aim at reducing the dimensions of the marker data. Nearly all reported models only included additive effects. Once the marker effects are estimated, breeding values of young selection candidates can be predicted with reported accuracies up to 0.85. Although results from simulation studies suggest that different models may yield more accurate genomic estimated breeding values (GEBVs) for different traits, depending on the underlying QTL distribution of the trait, there is so far only little evidence from studies based on real data to support this. The accuracy of genomic predictions strongly depends on characteristics of the reference populations, such as number of animals, number of markers, and the heritability of the recorded phenotype. Another important factor is the relationship between animals in the reference population and the evaluated animals. The breakup of LD between markers and QTL across generations advocates frequent re-estimation of marker effects to maintain the accuracy of GEBVs at an acceptable level. Therefore, at low frequencies of re-estimating marker effects, it becomes more important that the model that estimates the marker effects capitalizes on LD information that is persistent across generations. 相似文献
9.
近年来,随着基因芯片技术的发展与育种技术的进步,动植物的基因组选择成为研究热点。在家畜育种中,基因组选择凭借其准确性高、世代间隔短和育种成本低等优势被应用于各种经济动物的种畜选择中。本文详细介绍了基因分型技术和基因组育种值估计方法(最小二乘法、RR-BLUP法、GBLUP法、ssGBLUP法、贝叶斯A法、贝叶斯B法等),并对这些育种方法选用的标记范围、准确性以及计算速度进行了比较,总结了我国和其他国家基因组选择在种畜选择中的应用情况及存在的问题,展望了目前国内外在基因组选择上的最新研究动态及进展,以期为其他育种工作者进一步了解基因组选择提供参考。 相似文献
10.
Bráulio Fabiano Xavier de Moraes Rodrigo Furtado dos Santos Bruno Marco de Lima Aurélio Mendes Aguiar Alexandre Alves Missiaggia Donizete da Costa Dias Gabriel Dehon Peçanha Sampaio Rezende Flávia Maria Avelar Gonçalves Juan J. Acosta Matias Kirst Márcio F. R. ResendeJr Patricio R. Muñoz 《Molecular breeding : new strategies in plant improvement》2018,38(9):115
The successful application of genomic selection (GS) approaches is dependent on genetic makers derived from high-throughput and low-cost genotyping methods. Recent GS studies in trees have predominantly relied on SNP arrays as the source of genotyping, though this technology has a high entry cost. The recent development of alternative genotyping platforms, tailored to specific species and with low entry cost, has become possible due to advances in next-generation sequencing and genome complexity reduction methods such as sequence capture. However, the performance of these new platforms in GS models has not yet been evaluated, or compared to models developed from SNP arrays. Here, we evaluate the impact of these genotyping technologies on the development of GS prediction models for a Eucalyptus breeding population composed of 739 trees phenotyped for 13 wood quality and growth traits. Genotyping data obtained with both methods were compared for linkage disequilibrium, minor allele frequency, and missing data. Phenotypic prediction methods RR-BLUP and BayesB were employed, while predictive ability using cross validation was used to evaluate the performance of GS models derived from the different genotyping platforms. Differences in linkage disequilibrium patterns, minor allele frequency, missing data, and marker distribution were detected between sequence capture and SNP arrays. However, RR-BLUP and BayesB GS models resulted in similar predictive abilities. These results demonstrate that both genotyping methods are equivalent for genomic prediction of the traits evaluated. Sequence capture offers an alternative for species where SNP arrays are not available, or for when the initial development cost is too high. 相似文献
11.
Genomic selection uses genome-wide dense SNP marker genotyping for the prediction of genetic values, and consists of two steps: (1) estimation of SNP effects, and (2) prediction of genetic value based on SNP genotypes and estimates of their effects. For the former step, BayesB type of estimators have been proposed, which assume a priori that many markers have no effects, and some have an effect coming from a gamma or exponential distribution, i.e. a fat-tailed distribution. Whilst such estimators have been developed using Monte Carlo Markov chain (MCMC), here we derive a much faster non-MCMC based estimator by analytically performing the required integrations. The accuracy of the genome-wide breeding value estimates was 0.011 (s.e. 0.005) lower than that of the MCMC based BayesB predictor, which may be because the integrations were performed one-by-one instead of for all SNPs simultaneously. The bias of the new method was opposite to that of the MCMC based BayesB, in that the new method underestimates the breeding values of the best selection candidates, whereas MCMC-BayesB overestimated their breeding values. The new method was computationally several orders of magnitude faster than MCMC based BayesB, which will mainly be advantageous in computer simulations of entire breeding schemes, in cross-validation testing, and practical schemes with frequent re-estimation of breeding values. 相似文献
12.
Background
To obtain predictions that are not biased by selection, the conditional mean of the breeding values must be computed given the data that were used for selection. When single nucleotide polymorphism (SNP) effects have a normal distribution, it can be argued that single-step best linear unbiased prediction (SS-BLUP) yields a conditional mean of the breeding values. Obtaining SS-BLUP, however, requires computing the inverse of the dense matrix G of genomic relationships, which will become infeasible as the number of genotyped animals increases. Also, computing G requires the frequencies of SNP alleles in the founders, which are not available in most situations. Furthermore, SS-BLUP is expected to perform poorly relative to variable selection models such as BayesB and BayesC as marker densities increase.Methods
A strategy is presented for Bayesian regression models (SSBR) that combines all available data from genotyped and non-genotyped animals, as in SS-BLUP, but accommodates a wider class of models. Our strategy uses imputed marker covariates for animals that are not genotyped, together with an appropriate residual genetic effect to accommodate deviations between true and imputed genotypes. Under normality, one formulation of SSBR yields results identical to SS-BLUP, but does not require computing G or its inverse and provides richer inferences. At present, Bayesian regression analyses are used with a few thousand genotyped individuals. However, when SSBR is applied to all animals in a breeding program, there will be a 100 to 200-fold increase in the number of animals and an associated 100 to 200-fold increase in computing time. Parallel computing strategies can be used to reduce computing time. In one such strategy, a 58-fold speedup was achieved using 120 cores.Discussion
In SSBR and SS-BLUP, phenotype, genotype and pedigree information are combined in a single-step. Unlike SS-BLUP, SSBR is not limited to normally distributed marker effects; it can be used when marker effects have a t distribution, as in BayesA, or mixture distributions, as in BayesB or BayesC π. Furthermore, it has the advantage that matrix inversion is not required. We have investigated parallel computing to speedup SSBR analyses so they can be used for routine applications.Electronic supplementary material
The online version of this article (doi:10.1186/1297-9686-46-50) contains supplementary material, which is available to authorized users. 相似文献13.
Factors Affecting Accuracy From Genomic Selection in Populations Derived From Multiple Inbred Lines: A Barley Case Study 总被引:3,自引:0,他引:3
下载免费PDF全文
![点击此处可从《Genetics》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Shengqiang Zhong Jack C. M. Dekkers Rohan L. Fernando Jean-Luc Jannink 《Genetics》2009,182(1):355-364
We compared the accuracies of four genomic-selection prediction methods as affected by marker density, level of linkage disequilibrium (LD), quantitative trait locus (QTL) number, sample size, and level of replication in populations generated from multiple inbred lines. Marker data on 42 two-row spring barley inbred lines were used to simulate high and low LD populations from multiple inbred line crosses: the first included many small full-sib families and the second was derived from five generations of random mating. True breeding values (TBV) were simulated on the basis of 20 or 80 additive QTL. Methods used to derive genomic estimated breeding values (GEBV) were random regression best linear unbiased prediction (RR–BLUP), Bayes-B, a Bayesian shrinkage regression method, and BLUP from a mixed model analysis using a relationship matrix calculated from marker data. Using the best methods, accuracies of GEBV were comparable to accuracies from phenotype for predicting TBV without requiring the time and expense of field evaluation. We identified a trade-off between a method's ability to capture marker-QTL LD vs. marker-based relatedness of individuals. The Bayesian shrinkage regression method primarily captured LD, the BLUP methods captured relationships, while Bayes-B captured both. Under most of the study scenarios, mixed-model analysis using a marker-derived relationship matrix (BLUP) was more accurate than methods that directly estimated marker effects, suggesting that relationship information was more valuable than LD information. When markers were in strong LD with large-effect QTL, or when predictions were made on individuals several generations removed from the training data set, however, the ranking of method performance was reversed and BLUP had the lowest accuracy. 相似文献
14.
Background
Recently, artificial neural networks (ANN) have been proposed as promising machines for marker-based genomic predictions of complex traits in animal and plant breeding. ANN are universal approximators of complex functions, that can capture cryptic relationships between SNPs (single nucleotide polymorphisms) and phenotypic values without the need of explicitly defining a genetic model. This concept is attractive for high-dimensional and noisy data, especially when the genetic architecture of the trait is unknown. However, the properties of ANN for the prediction of future outcomes of genomic selection using real data are not well characterized and, due to high computational costs, using whole-genome marker sets is difficult. We examined different non-linear network architectures, as well as several genomic covariate structures as network inputs in order to assess their ability to predict milk traits in three dairy cattle data sets using large-scale SNP data. For training, a regularized back propagation algorithm was used. The average correlation between the observed and predicted phenotypes in a 20 times 5-fold cross-validation was used to assess predictive ability. A linear network model served as benchmark.Results
Predictive abilities of different ANN models varied markedly, whereas differences between data sets were small. Dimension reduction methods enhanced prediction performance in all data sets, while at the same time computational cost decreased. For the Holstein-Friesian bull data set, an ANN with 10 neurons in the hidden layer achieved a predictive correlation of r=0.47 for milk yield when the entire marker matrix was used. Predictive ability increased when the genomic relationship matrix (r=0.64) was used as input and was best (r=0.67) when principal component scores of the marker genotypes were used. Similar results were found for the other traits in all data sets.Conclusion
Artificial neural networks are powerful machines for non-linear genome-enabled predictions in animal breeding. However, to produce stable and high-quality outputs, variable selection methods are highly recommended, when the number of markers vastly exceeds sample size. 相似文献15.
Background
Genomic selection (GS) uses molecular breeding values (MBV) derived from dense markers across the entire genome for selection of young animals. The accuracy of MBV prediction is important for a successful application of GS. Recently, several methods have been proposed to estimate MBV. Initial simulation studies have shown that these methods can accurately predict MBV. In this study we compared the accuracies and possible bias of five different regression methods in an empirical application in dairy cattle.Methods
Genotypes of 7,372 SNP and highly accurate EBV of 1,945 dairy bulls were used to predict MBV for protein percentage (PPT) and a profit index (Australian Selection Index, ASI). Marker effects were estimated by least squares regression (FR-LS), Bayesian regression (Bayes-R), random regression best linear unbiased prediction (RR-BLUP), partial least squares regression (PLSR) and nonparametric support vector regression (SVR) in a training set of 1,239 bulls. Accuracy and bias of MBV prediction were calculated from cross-validation of the training set and tested against a test team of 706 young bulls.Results
For both traits, FR-LS using a subset of SNP was significantly less accurate than all other methods which used all SNP. Accuracies obtained by Bayes-R, RR-BLUP, PLSR and SVR were very similar for ASI (0.39-0.45) and for PPT (0.55-0.61). Overall, SVR gave the highest accuracy.All methods resulted in biased MBV predictions for ASI, for PPT only RR-BLUP and SVR predictions were unbiased. A significant decrease in accuracy of prediction of ASI was seen in young test cohorts of bulls compared to the accuracy derived from cross-validation of the training set. This reduction was not apparent for PPT. Combining MBV predictions with pedigree based predictions gave 1.05 - 1.34 times higher accuracies compared to predictions based on pedigree alone. Some methods have largely different computational requirements, with PLSR and RR-BLUP requiring the least computing time.Conclusions
The four methods which use information from all SNP namely RR-BLUP, Bayes-R, PLSR and SVR generate similar accuracies of MBV prediction for genomic selection, and their use in the selection of immediate future generations in dairy cattle will be comparable. The use of FR-LS in genomic selection is not recommended. 相似文献16.
Jaime Zapata-Valenzuela Fikret Isik Christian Maltecca Jill Wegrzyn David Neale Steve McKeand Ross Whetten 《Tree Genetics & Genomes》2012,8(6):1307-1318
Advances in DNA sequencing technology have made possible the genotyping of thousands of single-nucleotide polymorphism (SNP) markers, and new methods of statistical analysis are emerging to apply these advances in plant breeding programs. We report the utility of markers for prediction of breeding values in a forest tree species using empirical genotype data (3,406 polymorphic SNP loci). A total of 526 Pinus taeda L. clones tested widely in field trials were phenotyped at age 5?years. Only 149 clones from 13 full-sib crosses were genotyped. Markers were fit simultaneously to predict marker additive and dominance effects. Subsets of the 149 genotyped clones were used to train a model using all markers. Cross-validation strategies were followed for the remaining subset of genotyped individuals. The accuracy of genomic estimated breeding values ranged from 0.61 to 0.83 for wood lignin and cellulose content, and from 0.30 to 0.68 for height and volume traits. The accuracies of predictions based on markers were comparable with the accuracies based on pedigree. Because of the small number of SNP markers used and the relatively small population size, we suggest that observed accuracies in this study trace familial linkage rather than historical linkage disequilibrium with trait loci. Prediction accuracies of models that use only a subset of markers were generally comparable with the accuracies of the models using all markers, regardless of whether markers are associated with the phenotype. The results suggest that using SNP loci for selection instead of phenotype is efficient under different relative lengths of the breeding cycle, which would allow cost-effective applications in tree breeding programs. Prospects for applications of genomic selection to P. taeda breeding are discussed. 相似文献
17.
Genomic selection (GS) is of interest in breeding because of its potential for
predicting the genetic value of individuals and increasing genetic gains per unit of
time. To date, very few studies have reported empirical results of GS potential in
the context of large population sizes and long breeding cycles such as for boreal
trees. In this study, we assessed the effectiveness of marker-aided selection in an
undomesticated white spruce (Picea glauca (Moench) Voss) population of large
effective size using a GS approach. A discovery population of 1694 trees
representative of 214 open-pollinated families from 43 natural populations was
phenotyped for 12 wood and growth traits and genotyped for 6385 single-nucleotide
polymorphisms (SNPs) mined in 2660 gene sequences. GS models were built to predict
estimated breeding values using all the available SNPs or SNP subsets of the largest
absolute effects, and they were validated using various cross-validation schemes. The
accuracy of genomic estimated breeding values (GEBVs) varied from 0.327 to 0.435 when
the training and the validation data sets shared half-sibs that were on average
90% of the accuracies achieved through traditionally estimated breeding
values. The trend was also the same for validation across sites. As expected, the
accuracy of GEBVs obtained after cross-validation with individuals of unknown
relatedness was lower with about half of the accuracy achieved when half-sibs were
present. We showed that with the marker densities used in the current study,
predictions with low to moderate accuracy could be obtained within a large
undomesticated population of related individuals, potentially resulting in larger
gains per unit of time with GS than with the traditional approach. 相似文献
18.
Background
A newly recognized type of genetic variation, Copy Number Variation (CNV), is detected in mammalian genomes, e.g. the cattle genome. This form of variation can potentially cause phenotypic variation. Our objective was to determine whether dense SNP (single nucleotide polymorphisms) panels can capture the genetic variation due to a simple bi-allelic CNV, with the prospect of including the effect of such structural variations into genomic predictions.Methods
A deletion type CNV on bovine chromosome 6 was predicted from its neighboring SNP with a multiple regression model. Our dataset consisted of CNV genotypes of 1,682 cows, along with 100 surrounding SNP genotypes. A prediction model was fitted considering 10 to 100 surrounding SNP and the accuracy obtained directly from the model was confirmed by cross-validation.Results and conclusions
The accuracy of prediction increased with an increasing number of SNP in the model and the predicted accuracies were similar to those obtained by cross-validation. A substantial increase in accuracy was observed when the number of SNP increased from 10 to 50 but thereafter the increase was smaller, reaching the highest accuracy (0.94) with 100 surrounding SNP. Thus, we conclude that the genotype of a deletion type CNV and its putative QTL effect can be predicted with a maximum accuracy of 0.94 from surrounding SNP. This high prediction accuracy suggests that genetic variation due to simple deletion CNV is well captured by dense SNP panels. Since genomic selection relies on the availability of a dense marker panel with markers in close linkage disequilibrium to the QTL in order to predict their genetic values, we also discuss opportunities for genomic selection to predict the effects of CNV by dense SNP panels, when CNV cause variation in quantitative traits. 相似文献19.
J. Kijas N. Elliot P. Kube B. Evans N. Botwright H. King C. R. Primmer K. Verbyla 《Animal genetics》2017,48(2):237-241
Farmed Atlantic salmon (Salmo salar) is a globally important production species, including in Australia where breeding and selection has been in progress since the 1960s. The recent development of SNP genotyping platforms means genome‐wide association and genomic prediction can now be implemented to speed genetic gain. As a precursor, this study collected genotypes at 218 132 SNPs in 777 fish from a Tasmanian breeding population to assess levels of genetic diversity, the strength of linkage disequilibrium (LD) and imputation accuracy. Genetic diversity in Tasmanian Atlantic salmon was lower than observed within European populations when compared using four diversity metrics. The distribution of allele frequencies also showed a clear difference, with the Tasmanian animals carrying an excess of low minor allele frequency variants. The strength of observed LD was high at short distances (<25 kb) and remained above background for marker pairs separated by large chromosomal distances (hundreds of kb), in sharp contrast to the European Atlantic salmon tested. Genotypes were used to evaluate the accuracy of imputation from low density (0.5 to 5 K) up to increased density SNP sets (78 K). This revealed high imputation accuracies (0.89–0.97), suggesting that the use of low density SNP sets will be a successful approach for genomic prediction in this population. The long‐range LD, comparatively low genetic diversity and high imputation accuracy in Tasmanian salmon is consistent with known aspects of their population history, which involved a small founding population and an absence of subsequent introgression. The findings of this study represent an important first step towards the design of methods to apply genomics in this economically important population. 相似文献
20.
David Habier Jens Tetens Franz-Reinhold Seefried Peter Lichtner Georg Thaller 《遗传、选种与进化》2010,42(1):5