Robustness of the long-range structure in denatured staphylococcal nuclease to changes in amino acid sequence

A nativelike low-resolution structure has been shown to persist in the Delta 131 Delta denatured fragment of staphylococcal nuclease, even in the presence of 8 M urea. In this report, the physical-chemical basis of this structure is addressed by monitoring changes in structure reflected in residual dipolar couplings and diffusion coefficients as a function of changes in amino acid sequence. Ten large hydrophobic residues, previously shown to play dominant roles in the stability of the native state, are replaced with polar residues of similar shape. Modest increases in the Stokes radius determined by NMR methods result from replacement of five isoleucine/valine residues with threonine, one leucine with glutamine, and oxidation of four methionines to the sulfoxides. Yet in the presence of all ten hydrophobic to polar substitutions and 8 M urea, the NMR signature of a native-like topology is still largely intact. In addition, removal of 30 residues from either the N-terminus (which deletes a three-strand beta meander) or C-terminus (a long extended segment and the final alpha helix) produces only very small changes in long-range structure. These data indicate that both the general shape of the denatured state and the angular relationships of individual bond angles to the axes describing the spatial distribution of the protein chain are insensitive to large changes in the amino acid sequence, a finding consistent with the conclusion that the long-range structure of denatured proteins is encoded primarily by local steric interactions between side chains and the polypeptide backbone.     

Analysis of long-range interactions in a model denatured state of staphylococcal nuclease based on correlated changes in backbone dynamics.

An expanded, highly dynamic denatured state of staphylococcal nuclease exhibits a native-like topology in the apparent absence of tight packing and fixed hydrogen bonds (Gillespie JR, Shortle D, 1997, J Mol Biol 268:158-169, 170-184). To address the physical basis of the long-range spatial ordering of this molecule, we probe the effects of perturbations of the sequence and solution conditions on the local chain dynamics of a denatured 101-residue fragment that is missing the first three beta strands. Structural interactions between chain segments are inferred from correlated changes in the motional behavior of residues monitored by 15N NMR relaxation measurements. Restoration of the sequence corresponding to the first three beta strands significantly increases the average order of all chain segments that form the five strand beta barrel including loops but has no effect on the carboxy terminal 30 residues. Addition of the denaturing salt sodium perchlorate enhances ordering over the entire sequence of this fragment. Analysis of seven different substitution mutants points to a complex set of interactions between the hydrophobic segment corresponding to beta strand 5 and the remainder of the chain. General patterns in the data suggest there is a hierarchy of native-like interactions that occur transiently in the denatured state and are consistent with the overall topology of the denatured state ensemble being determined by many coupled local interactions rather than a few highly specific long-range interactions.     

Effects of denaturants and substitutions of hydrophobic residues on backbone dynamics of denatured staphylococcal nuclease

Analysis of residual dipolar couplings (RDCs) in the Delta131Delta fragment of staphylococcal nuclease has demonstrated that its ensemble-averaged structure is resistant to perturbations such as high concentrations of urea, low pH, and substitution of hydrophobic residues, suggesting that its residual structure is encoded by local side-chain/backbone interactions. In the present study, the effects of these same perturbations on the backbone dynamics of Delta131Delta were examined through (1)H-(15)N relaxation methods. Unlike the global structure reported by RDCs, the transverse relaxation rates R(2) were quite sensitive to denaturing conditions. At pH 5.2, Delta131Delta exhibits an uneven R(2) profile with several characteristic peaks involving hydrophobic chain segments. Protonation of carboxyl side chains by lowering the pH reduces the values of R(2) along the entire chain, yet these characteristic peaks remain. In contrast, high concentrations of urea or the substitution of 10 hydrophobic residues eliminates these peaks and reduces the R(2) values by a greater amount. The combination of low pH and high urea leads to further decreases in R(2). These denaturant-induced increases in backbone mobility are also reflected in decreases in (15)N NOEs and in relaxation interference parameters, with the former reporting an increase in fast motions and the latter a decrease in slow motions. Comparison between the changes in chain dynamics and the corresponding changes in Stokes radius and the patterns of RDCs suggests that regional variations in backbone dynamics in denatured nuclease arise primarily from local contacts between hydrophobic side chains and local interactions involving charged carboxyl groups.     

Microscopic stability of cold shock protein A examined by NMR native state hydrogen exchange as a function of urea and trimethylamine N-oxide

Native state hydrogen exchange of cold shock protein A (CspA) has been characterized as a function of the denaturant urea and of the stabilizing agent trimethylamine N-oxide (TMAO). The structure of CspA has five strands of beta-sheet. Strands beta1-beta4 have strongly protected amide protons that, based on experiments as a function of urea, exchange through a simple all-or-none global unfolding mechanism. By contrast, the protection of amide protons from strand beta5 is too weak to measure in water. Strand beta5 is hydrogen bonded to strands beta3 and beta4, both of which afford strong protection from solvent exchange. Gaussian network model (GNM) simulations, which assume that the degree of protection depends on tertiary contact density in the native structure, accurately predict the strong protection observed in strands beta1-beta4 but fail to account for the weak protection in strand beta5. The most conspicuous feature of strand beta5 is its low sequence hydrophobicity. In the presence of TMAO, there is an increase in the protection of strands beta1-beta4, and protection extends to amide protons in more hydrophilic segments of the protein, including strand beta5 and the loops connecting the beta-strands. TMAO stabilizes proteins by raising the free energy of the denatured state, due to highly unfavorable interactions between TMAO and the exposed peptide backbone. As such, the stabilizing effects of TMAO are expected to be relatively independent of sequence hydrophobicity. The present results suggest that the magnitude of solvent exchange protection depends more on solvent accessibility in the ensemble of exchange susceptible conformations than on the strength of hydrogen-bonding interactions in the native structure.     

Structure of the nuclear factor ALY: insights into post-transcriptional regulatory and mRNA nuclear export processes

ALY is a ubiquitously expressed nuclear protein which interacts with proteins such as TAP that are involved in export of mRNA from the nucleus to the cytoplasm, as well as with proteins that bind the T cell receptor alpha gene enhancer. ALY has also been shown to bind mRNA and to co-localize in the nucleus with components of a multiprotein postsplicing complex that is deposited 20-24 nucleotides upstream of exon-exon junctions. ALY has a conserved RNA binding domain (RBD) flanked by Gly-Arg rich N-terminal and C-terminal sequences. We determined the solution structure of the RBD homology region in ALY by nuclear magnetic resonance methods. The RBD motif in ALY has a characteristic beta(1)alpha(1)beta(2)-beta(3)alpha(2)beta(4) fold, consisting of a beta sheet composed of four antiparallel beta strands and two alpha helices that pack on one face of the beta sheet. As in other RBD structures, the beta sheet has an exposed face with hydrophobic and charged residues that could modulate interactions with other molecules. The loop that connects beta strands 2 and 3 is in intermediate motion in the NMR time scale, which is also characteristic of other RBDs. This loop presents side chains close to the exposed surface of the beta sheet and is a primary candidate site for intermolecular interactions. The structure of the conserved RBD of ALY provides insight into the nature of interactions involving this multifunctional protein.     

Interactions in nonnative and truncated forms of staphylococcal nuclease as indicated by mutational free energy changes.

Several mixed disulfide variants of staphylococcal nuclease have been produced by disulfide bond formation between nuclease V23C and methane, ethane, 1-propane, 1-n-butane, and 1-n-pentane thiols. Although CD spectroscopy shows that the native state is largely unperturbed, the stability toward urea-induced unfolding is highly dependent on the nature of the group at this position, with the methyl disulfide protein being the most stable. The variant produced by modification with iodoacetic acid, however, gives a CD spectrum indicative of an unfolded polypeptide. Thiol-disulfide exchange equilibrium constants between nuclease V23C and 2-hydroxyethyl disulfide have been measured as a function of urea concentration. Because thiol-disulfide exchange and unfolding are thermodynamically linked, the effects of a mutation (disulfide exchange) can be partitioned between various conformational states. In the case of unmodified V23C and the 2-hydroxyethyl protein mixed disulfide, significant effects in the nonnative states of nuclease are observed. Truncated forms of staphylococcal nuclease are thought to be partially folded and may be good models for early folding intermediates. We have characterized a truncated form of nuclease comprised of residues 1-135 with a V23C mutation after chemical modification of the cysteine residue. High-resolution size-exclusion chromatography indicates that modification brings about significant changes in the Stokes radius of the protein, and CD spectroscopy indicates considerable differences in the amount of secondary structure present. Measurement of the disulfide exchange equilibrium constant between this truncated protein and 2-hydroxyethyl disulfide indicate significant interactions between position 23 and the rest of the protein when the urea concentration is lower than 1.5 M.(ABSTRACT TRUNCATED AT 250 WORDS)     

Complex assembly mechanism and an RNA-binding mode of the human p14-SF3b155 spliceosomal protein complex identified by NMR solution structure and functional analyses

The spliceosomal protein p14, a component of the SF3b complex in the U2 small nuclear ribonucleoprotein (snRNP), is essential for the U2 snRNP to recognize the branch site adenosine. The elucidation of the dynamic process of the splicing machinery rearrangement awaited the solution structural information. We identified a suitable complex of human p14 and the SF3b155 fragment for the determination of its solution structure by NMR. In addition to the overall structure of the complex, which was recently reported in a crystallographic study (typical RNA recognition motif fold beta1-alpha1-beta2-beta3-alpha2-beta4 of p14, and alphaA-betaA fold of the SF3b155 fragment), we identified three important features revealed by the NMR solution structure. First, the C-terminal extension and the nuclear localization signal of p14 (alpha3 and alpha4 in the crystal structure, respectively) were dispensable for the complex formation. Second, the proline-rich segment of SF3b155, following betaA, closely approaches p14. Third, interestingly, the beta1-alpha1 loop and the alpha2-beta4 beta-hairpin form a positively charged groove. Extensive mutagenesis analyses revealed the functional relevance of the residues involved in the protein-protein interactions: two aromatic residues of SF3b155 (Phe408 and Tyr412) play crucial roles in the complex formation, and two hydrophobic residues (Val414 and Leu415) in SF3b 155 serve as an anchor for the complex formation, by cooperating with the aromatic residues. These findings clearly led to the conclusion that SFb155 binds to p14 with three contact points, involving Phe408, Tyr412, and Val414/Leu415. Furthermore, to dissect the interactions between p14 and the branch site RNA, we performed chemical-shift-perturbation experiments, not only for the main-chain but also for the side-chain resonances, for several p14-SF3b155 complex constructs upon binding to RNA. These analyses identified a positively charged groove and the C-terminal extension of p14 as RNA-binding sites. Strikingly, an aromatic residue in the beta1-alpha1 loop, Tyr28, and a positively charged residue in the alpha2-beta4 beta-hairpin, Agr85, are critical for the RNA-binding activity of the positively charged groove. The Tyr28Ala and Arg85Ala point mutants and a deletion mutant of the C-terminal extension clearly revealed that their RNA binding activities were independent of each other. Collectively, this study provides details for the protein-recognition mode of p14 and insight into the branch site recognition.     

Structural basis for CD44 recognition by ERM proteins

CD44 is an important adhesion molecule that functions as the major hyaluronan receptor which mediates cell adhesion and migration in a variety of physiological and pathological processes. Although full activity of CD44 requires binding to ERM (ezrin/radixin/moesin) proteins, the CD44 cytoplasmic region, consisting of 72 amino acid residues, lacks the Motif-1 consensus sequence for ERM binding found in intercellular adhesion molecule (ICAM)-2 and other adhesion molecules of the immunoglobulin superfamily. Ultracentrifugation sedimentation studies and circular dichroism measurements revealed an extended monomeric form of the cytoplasmic peptide in solution. The crystal structure of the radixin FERM domain complexed with a CD44 cytoplasmic peptide reveals that the KKKLVIN sequence of the peptide forms a beta strand followed by a short loop structure that binds subdomain C of the FERM domain. Like Motif-1 binding, the CD44 beta strand binds the shallow groove between strand beta5C and helix alpha1C and augments the beta sheet beta5C-beta7C from subdomain C. Two hydrophobic CD44 residues, Leu and Ile, are docked into a hydrophobic pocket with the formation of hydrogen bonds between Asn of the CD44 short loop and loop beta4C-beta5C from subdomain C. This binding mode resembles that of NEP (neutral endopeptidase 24.11) rather than ICAM-2. Our results reveal a characteristic versatility of peptide recognition by the FERM domains from ERM proteins, suggest a possible mechanism by which the CD44 tail is released from the cytoskeleton for nuclear translocation by regulated intramembrane proteolysis, and provide a structural basis for Smad1 interactions with activated CD44 bound to ERM protein.     

Characterization of the residual structure in the unfolded state of the Delta131Delta fragment of staphylococcal nuclease

The determination of the conformational preferences in unfolded states of proteins constitutes an important challenge in structural biology. We use inter-residue distances estimated from site-directed spin-labeling NMR experimental measurements as ensemble-averaged restraints in all-atom molecular dynamics simulations to characterise the residual structure of the Delta131Delta fragment of staphylococcal nuclease under physiological conditions. Our findings indicate that Delta131Delta under these conditions shows a tendency to form transiently hydrophobic clusters similar to those present in the native state of wild-type staphylococcal nuclease. Only rarely, however, all these interactions are simultaneously realized to generate conformations with an overall native topology.     

Folding mechanisms of proteins with high sequence identity but different folds

The problem of how a protein folds from a linear chain of amino acids to the three-dimensional structure necessary for function is often investigated using proteins with a low degree of sequence identity that adopt different folds. The design of pairs of proteins with a high degree of sequence identity but different folds offers the opportunity for a complementary study; in two highly similar sequences, which residues are the most important in directing folding to a particular structure? Here we use molecular dynamics simulations to characterize the folding-unfolding pathways of a pair of proteins designed by Bryan and co-workers [Alexander, P. A., et al. (2005) Biochemistry 44, 14045-14054; He, Y. N., et al. (2005) Biochemistry 44, 14055-14061]. Despite being 59% identical, the two protein sequences fold to two different structures. The first sequence folds to the alpha+beta protein G structure and the second to the all-alpha-helical protein A structure. We show that the final protein structure is determined early along the folding pathway. In folding to the protein G structure, the single alpha-helix (alpha1) and the beta3-beta4 turn fold early. Formation of the hairpin turn essentially prevents folding to helical structure in this region of the protein. This early structure is then consolidated by formation of long-range hydrophobic interactions between alpha1 and the beta3-beta4 turn. The protein A sequence differs both in the residues that form the beta3-beta4 turn and also in many of the residues that form the early hydrophobic interactions in the protein G structure. Instead, in the protein A sequence, a more hierarchical mechanism is observed, with helices folding before many of the tertiary interactions are formed. We find that small, but critical, sequence differences determine the topology of the protein early along the folding pathway, which help to explain the process by which one fold can evolve into another.     

Exploring the differences and similarities between urea and thermally driven denaturation of bovine serum albumin: intermolecular forces and solvation preferences

The interactions of bovine serum albumin (BSA) with urea/water were investigated by computer simulation. It was revealed that the BSA-hydrophobic residues in urea solutions favored contact with urea more than with water. Energy decomposition analysis showed that van der Waals energy was the dominant driving force behind urea affinity for hydrophobic residues, whereas coulombic attraction was largely responsible for water affinity for these residues. Meanwhile, urea–BSA hydrogen bond energies were found to be weaker than water–BSA hydrogen bond energies. The greater strength of water–BSA hydrogen bonds than urea–BSA hydrogen bonds, and the opposing preferential interaction between the BSA and urea suggest that disruption of hydrophobic interaction predominates urea–protein denaturation. In pure water, hydrophobic residues showed aggregation tendencies at 323 K, suggesting an increase in hydrophobicity, while at 353 K the residues were partly denatured due to loss of hydrogen bonds; thus, disruption of hydrophobic interactions appeared to contribute less to thermal denaturation.     

The dominant interaction between peptide and urea is electrostatic in nature: a molecular dynamics simulation study

The conformational equilibrium of a blocked valine peptide in water and aqueous urea solution is studied using molecular dynamics simulations. Pair correlation functions indicate enhanced concentration of urea near the peptide. Stronger hydrogen bonding of urea-peptide compared to water-peptide is observed with preference for helical conformation. The potential of mean force, computed using umbrella sampling, shows only small differences between urea and water solvation that are difficult to quantify. The changes in solvent structure around the peptide are explained by favorable electrostatic interactions (hydrogen bonds) of urea with the peptide backbone. There is no evidence for significant changes in hydrophobic interactions in the two conformations of the peptide in urea solution. Our simulations suggest that urea denatures proteins by preferentially forming hydrogen bonds to the peptide backbone, reducing the barrier for exposing protein residues to the solvent, and reaching the unfolded state.     

Solution structure of the osteogenic 1-31 fragment of the human parathyroid hormone

The solution conformations of a selectively osteogenic 1-31 fragment of the human parathyroid hormone (hPTH), hPTH(1-31)NH(2), have been characterized by use of very high field NMR spectroscopy at 800 MHz. The combination of the CalphaH proton and (13)Calpha chemical shifts, (3)J(NH)(alpha) coupling constants, NH proton temperature coefficients, and backbone NOEs reveals that the hPTH(1-31)NH(2) peptide has well-formed helical structures localized in two distinct segments of the polypeptide backbone. There are also many characteristic NOEs defining specific side-chain/backbone and side-chain/side-chain contacts within both helical structures. The solution structure of hPTH(1-31)NH(2) contains a short N-terminal helical segment for residues 3-11, including the helix capping residues 3 and 11 and a long C-terminal helix for residues 16-30. The two helical structures are reinforced by well-defined capping motifs and side-chain packing interactions within and at both ends of these helices. On one face of the C-terminal helix, there are side-chain pairs of Glu22-Arg25, Glu22-Lys26, and Arg25-Gln29 that can form ion-pair and/or hydrogen bonding interactions. On the opposite face of this helix, there are characteristic hydrophobic interactions involving the aromatic side chain of Trp23 packing against the aliphatic side chains of Leu15, Leu24, Lys27, and Leu28. There is also a linear array of hydrophobic residues from Val2, to Leu7, to Leu11 and continuing on to residues His14 and Leu15 in the hinge region and to Trp23 in the C-terminal helix. Capping and hydrophobic interactions at the end of the N-terminal and at the beginning of the C-terminal helix appear to consolidate the helical structures into a V-shaped overall conformation for at least the folded population of the hPTH(1-31)NH(2) peptide. Stabilization of well-folded conformations in this linear 1-31 peptide fragment and possibly other analogues of human PTH may have a significant impact on the biological activities of the PTH peptides in general and specifically for the osteogenic/anabolic activities of bone-building PTH analogues.     

Folding patterns of porin and bacteriorhodopsin.

Porin spans the outer membrane of Escherichia coli with most of the protein embedded within the membrane. It lacks pronounced hydrophobic domains and consists predominantly of beta-pleated sheet. These observations require the accommodation of polar and ionizable residues in an environment that has a low dielectric constant. Owing to a currently limited understanding of the constraints governing membrane protein structure, a minimal approach to structure prediction is proposed that identifies segments causing polypeptides to reverse their direction (turn identification). The application of this procedure avoids hydrophobicity parameters and yields a model of porin which is in good agreement with all experimental data available. The presence of polar and ionizable residues within membrane boundaries implies a dense (saturating) network of hydrogen bond donor and acceptor groups. Application to a paradigm of hydrophobic membrane proteins, bacteriorhodopsin, reveals a pattern consistent with its alpha-helical folding. The postulated structure includes significantly more polar residues in the membrane domain than have been assumed previously, suggesting that there are also hydrogen bonding networks in bacteriorhodopsin. Extensive networks permeating protein interior and surfaces would explain the extraordinary stability and the tight interactions between functional units in the formation of crystalline arrays of both proteins.     

金黄色葡萄球菌核酸酶C末端去9肽对酶蛋白溶液构象的影响

通过多维异核核磁共振方法,结合运用荧光和圆二色等光谱方法,比较研究了V8菌株金黄色葡萄球菌核酸酶（含149个氨基酸残基）,酶蛋白1－140片段（SNase140)以及在TMP（thymidine 5′-monophosphate)和Ca^2 存在下的SNase140的溶液构象状态。探讨了酶蛋白C末端去9肽后对酶蛋白构象和活力的影响。研究指出,远离酶蛋白活性部位残基间相互作用的变化,将通过酶蛋白两个亚结构域之间所形成的氢键,影响酶蛋白活性部位的空间构象,从而影响酶蛋白的活力。     

Crystal structure and molecular dynamics simulation of ubiquitin-like domain of murine parkin

Parkin is the gene product identified as the major cause of autosomal recessive juvenile Parkinsonism (AR-JP). Parkin, a ubiquitin ligase E3, contains a unique ubiquitin-like domain in its N-terminus designated Uld which is assumed to be a interaction domain with the Rpn 10 subunit of 26S proteasome. To elucidate the structural and functional role of Uld in parkin at the atomic level, the X-ray crystal structure of murine Uld was determined and a molecular dynamics simulation of wild Uld and its five mutants (K27N, R33Q, R42P, K48A and V56E) identified from AR-JP patients was performed. Murine Uld consists of two alpha helices [Ile23-Arg33 (alpha1) and Val56-Gln57 (alpha2)] and five beta strands [Met1-Phe7 (beta1), Tyr11-Asp18 (beta2), Leu41-Phe45 (beta3), Lys48-Pro51 (beta4) and Ser65-Arg72 (beta5)] and its overall structure is essentially the same as that of human ubiquitin with a 1.22 A rmsd for the backbone atoms of residues 1-76; however, the sequential identity and similarity between both molecules are 32% and 63%, respectively. This close resemblance is due to the core structure built by same hydrogen bond formations between and within the backbone chains of alpha1 and beta1/2/5 secondary structure elements and by nearly the same hydrophobic interactions formed between the nonpolar amino acids of their secondary structures. The side chain NetaH of Lys27 on the alpha1 helix was crucial to the stabilization of the spatial orientations of beta3 and beta4 strands, possible binding region with Rpn 10 subunit, through three hydrogen bonds. The MD simulations showed the K27N and R33Q mutations increase the structural fluctuation of these beta strands including the alpha1 helix. Reversely, the V56E mutant restricted the spatial flexibility at the periphery of the short alpha2 helix by the interactions between the polar atoms of Glu56 and Ser19 residues. However, a large fluctuation of beta4 strand with respect to beta5 strand was induced in the R42P mutant, because of the impossibility of forming paired hydrogen bonds of Pro for Arg42 in wild Uld. The X-ray structure showed that the side chains of Asp39, Gln40 and Arg42 at the N-terminal periphery of beta3 strand protrude from the molecular surface of Uld and participate in hydrogen bonds with the polar residues of neighboring Ulds. Thus, the MD simulation suggests that the mutation substitution of Pro for Arg42 not only causes the large fluctuation of beta3 strand in the Uld but also leads to the loss of the ability of Uld to trap the Rpn 10 subunit. In contrast, the MD simulation of K48A mutant showed little influence on the beta3-beta4 loop structure, but a large fluctuation of Lys48 side chain, suggesting the importance of flexibility of this side chain for the interaction with the Rpn 10 subunit. The present results would be important in elucidating the impaired proteasomal binding mechanism of parkin in AR-JP.     

Conservative mutation Met8 --> Leu affects the folding process and structural stability of squash trypsin inhibitor CMTI-I

Protein molecules can accommodate a large number of mutations without noticeable effects on their stability and folding kinetics. On the other hand, some mutations can have quite strong effects on protein conformational properties. Such mutations either destabilize secondary structures, e.g., alpha-helices, are incompatible with close packing of protein hydrophobic cores, or lead to disruption of some specific interactions such as disulfide cross links, salt bridges, hydrogen bonds, or aromatic-aromatic contacts. The Met8 --> Leu mutation in CMTI-I results in significant destabilization of the protein structure. This effect could hardly be expected since the mutation is highly conservative, and the side chain of residue 8 is situated on the protein surface. We show that the protein destabilization is caused by rearrangement of a hydrophobic cluster formed by side chains of residues 8, Ile6, and Leu17 that leads to partial breaking of a hydrogen bond formed by the amide group of Leu17 with water and to a reduction of a hydrophobic surface buried within the cluster. The mutation perturbs also the protein folding. In aerobic conditions the reduced wild-type protein folds effectively into its native structure, whereas more then 75% of the mutant molecules are trapped in various misfolded species. The main conclusion of this work is that conservative mutations of hydrophobic residues can destabilize a protein structure even if these residues are situated on the protein surface and partially accessible to water. Structural rearrangement of small hydrophobic clusters formed by such residues can lead to local changes in protein hydration, and consequently, can affect considerably protein stability and folding process.     

An in vitro peptide folding model suggests the presence of the molten globule state during nascent peptide folding

Although molten globules have been widely accepted as a general intermediate in protein folding, there is no clear evidence to show their presence during nascent peptide folding. This paper concentrates on whether the molten globule state occurs, and if it does, when does it form during nascent peptide folding, by comparing the changes in conformation during peptide chain extension of staphylococcal nuclease R. The results show that a large N-terminal fragment of staphylococcal nuclease, SNR121, which already contains more than 80% amino acid sequence of the nuclease, is found to fulfill all the criteria for the molten globule state, suggesting that the molten globule should occur at a later stage of peptide elongation. At this stage the hydrophobic collapse of the polypeptide chain occurs driven by the hydrophobic force, which leads to the formation of a solvent-accessible non-polar core, characterized by the high ANS-binding fluorescence. The nascent peptide folding of the nuclease is a hierarchical process that at the very least includes the following steps: secondary structure accumulation, pre-molten globule state, molten globule state, post-molten globule state and finally the native state. Constant conformation adjustment is necessary for correct folding and active expression of the protein.     

Role of the chain termini for the folding transition state of the cold shock protein.

Residues Arg3 and Leu66 are crucially important for the enhanced stability of the cold shock protein Bc-Csp from the thermophile Bacillus caldolyticus relative to its homologue Bs-CspB from the mesophile Bacillus subtilis. Arg3, which replaces Glu3 of Bs-CspB, accounts for two-thirds of the stability difference and for the entire difference in Coulombic interactions between the two proteins. Leu66, which replaces Glu66 of Bs-CspB, contributes additional hydrophobic interactions. To elucidate the role of these two residues near the chain termini for the rapid folding of the cold shock proteins, we performed an extensive mutational analysis of the folding kinetics to characterize interactions between residues 3, 46, and 66 in the transition state of folding. We employed a pressure-jump apparatus which allows folding to be followed over a broad range of temperatures and urea concentrations in the time range of microseconds to minutes. The N-terminal region folds early, and the interactions that originate from residue 3 are present to a large extent in the transition state already. They include a hydrophobic contribution, a general electrostatic stabilization by the positive charge of Arg3 in Bc-Csp, and a pairwise Coulombic repulsion with Glu46 in the Arg3Glu variant. The C-terminus appears to be largely unfolded in the transition state. The interactions of Leu66, including those with the already structured N-terminal region, are established only after passage through the transition state. The N- and C-termini of the cold shock proteins thus contribute differently to the folding kinetics, although they are very close in space in the folded protein.     

Increasing the thermostability of staphylococcal nuclease: implications for the origin of protein thermostability

Seven hyper-stable multiple mutants have been constructed in staphylococcal nuclease by various combinations of eight different stabilizing single mutants. The stabilities of these multiple mutants determined by guanidine hydrochloride denaturation were 3.4 to 5.6 kcal/mol higher than that of the wild-type. Their thermal denaturation midpoint temperatures were 12.6 to 22.9 deg. C higher than that of the wild-type. These are among the greatest increases in protein stability and thermal denaturation midpoint temperature relative to the wild-type yet attained. There has been great interest in understanding how proteins found in thermophilic organisms are stabilized. One frequently cited theory is that the packing of hydrophobic side-chains is improved in the cores of proteins isolated from thermophiles when compared to proteins from mesophiles. The crystal structures of four single and five multiple stabilizing mutants of staphylococcal nuclease were solved to high resolution. No large overall structural change was found, with most changes localized around the sites of mutation. Rearrangements were observed in the packing of side-chains in the major hydrophobic core, although none of the mutations was in the core. It is surprising that detailed structural analysis showed that packing had improved, with the volume of the mutant protein's hydrophobic cores decreasing as protein stability increased. Further, the number of van der Waals interactions in the entire protein showed an experimentally significant increase correlated with increasing stability. These results indicate that optimization of packing follows as a natural consequence of increased protein thermostability and that good packing is not necessarily the proximate cause of high stability. Another popular theory is that thermostable proteins have more electrostatic and hydrogen bonding interactions and these are responsible for the high stabilities. The mutants here show that increased numbers of electrostatic and hydrogen bonding interactions are not obligatory for large increases in protein stability.