The NTA-His6 bond is strong enough for AFM single-molecular recognition studies

There is a need in current atomic force microscopy (AFM) molecular recognition studies for generic methods for the stable, functional attachment of proteins on tips and solid supports. In the last few years, the site-directed nitrilotriacetic acid (NTA)-polyhistidine (Hisn) system has been increasingly used towards this goal. Yet, a crucial question in this context is whether the NTA-Hisn bond is sufficiently strong for ensuring stable protein immobilization during force spectroscopy measurements. Here, we measured the forces between AFM tips modified with NTA-terminated alkanethiols and solid supports functionalized with His6-Gly-Cys peptides in the presence of Ni2+. The force histogram obtained at a loading rate of 6600 pN s(-1) showed three maxima at rupture forces of 153 +/- 57 pN, 316 +/- 50 pN and 468 +/- 44 pN, that we attribute primarily to monovalent and multivalent interactions between a single His6 moiety and one, two and three NTA groups, respectively. The measured forces are well above the 50-100 pN unbinding forces typically observed by AFM for receptor-ligand pairs. The plot of adhesion force versus log (loading rate) revealed a linear regime, from which we deduced a kinetic off-rate constant of dissociation, k(off) approximately 0.07 s(-1). This value is in the range of that estimated for the multivalent interaction involving two NTA, using fluorescence measurements, and may account for an increased binding stability of the NTA-His6 bond. We conclude that the NTA-His6 system is a powerful, well-suited platform for the stable, oriented immobilization of proteins in AFM single-molecule studies.     

原子力显微镜力谱研究大肠杆菌启动子与RNA聚合酶的相互作用

【目的】本研究通过原子力显微镜(AFM)力谱技术研究了大肠杆菌启动子与RNA聚合酶(RNAp)间的相互作用,目的是建立一种高效的体外表征启动子的新方法。【方法】优化了用于单分子AFM力谱分析的蛋白固定化策略,建立AFM力谱分析启动子的策略,以缺失识别启动子序列的σ亚基核心RNA聚合酶(RNAp-C)为对照,研究启动子/RNAp间相互作用的特异性。最后比较了序列较典型的Ls1启动子和缺失–10区的Ls2启动子的力谱。【结果】基于建立的方法,验证了Ls1与大肠杆菌RNAp结合的特异性,其相互作用力为(331.10±5.10)p N。与Ls1相比,Ls2启动子与RNAp结合显著减少。利用启动子探针质粒,以报告基因cat的表达产物氯霉素乙酰转移酶(CAT)的酶活验证Ls1、Ls2启动子强度,分别为(181.70±4.10)、(0.30±0.20)U/mg。【结论】本研究建立的基于AFM力谱技术的启动子分析技术,是一种高效的、直接定量表征启动子活性的新方法。     

Force spectroscopy of LFA-1 and its ligands, ICAM-1 and ICAM-2

Single-molecule measurements of the interaction of leukocyte function-associated antigen-1 (LFA-1), expressed on Jurkat T cells, with intercellular adhesion molecules-1 and -2 (ICAM-1 and ICAM-2) were conducted using atomic force microscopy (AFM). The force spectra (i.e., unbinding force versus loading rate) of both the LFA-1/ICAM-1 and LFA-1/ICAM-2 interactions were acquired at a loading rate range covering 3 orders of magnitude (50-60,000 pN/s) and revealed a fast loading regime and a slow loading regime. This indicates that the dissociation of both complexes involves overcoming a steep inner and a wide outer activation barrier. LFA-1 binding to ICAM-1 and ICAM-2 was strengthened in the slow loading regime by the addition of Mg(2+). Differences in the dynamic strength of the LFA-1/ICAM-1 and LFA-1/ICAM-2 interactions can be attributed to the presence of wider barriers in the ICAM-2 complex, making it more responsive to a pulling force than the ICAM-1 complex.     

Characterizing the effect of polymyxin B antibiotics to lipopolysaccharide on Escherichia coli surface using atomic force microscopy

Lipopolysaccharide (LPS) on gram‐negative bacterial outer membranes is the first target for antimicrobial agents, due to their spatial proximity to outer environments of microorganisms. To develop antibacterial compounds with high specificity for LPS binding, the understanding of the molecular nature and their mode of recognition is of key importance. In this study, atomic force microscopy (AFM) and single molecular force spectroscopy were used to characterize the effects of antibiotic polymyxin B (PMB) to the bacterial membrane at the nanoscale. Isolated LPS layer and the intact bacterial membrane were examined with respect to morphological changes at different concentrations of PMB. Our results revealed that 3 hours of 10 μg/mL of PMB exposure caused the highest roughness changes on intact bacterial surfaces, arising from the direct binding of PMB to LPS on the bacterial membrane. Single molecular force spectroscopy was used to probe specific interaction forces between the isolated LPS layer and PMB coupled to the AFM tip. A short range interaction regime mediated by electrostatic forces was visible. Unbinding forces between isolated LPS and PMB were about 30 pN at a retraction velocity of 500 nm/s. We further investigated the effects of the polycationic peptide PMB on bacterial outer membranes and monitored its influences on the deterioration of the bacterial membrane structure. Polymyxin B binding led to rougher appearances and wrinkles on the outer membranes surface, which may finally lead to lethal membrane damage of bacteria. Our studies indicate the potential of AFM for applications in pathogen recognition and nano‐resolution approaches in microbiology.     

Mg2+ modulates integrin–extracellular matrix interaction in vascular smooth muscle cells studied by atomic force microscopy

Atomic force microscopy (AFM) was used to investigate the interaction between α5β1 integrin and fibronectin (FN) in the presence of divalent cations. AFM probes were labeled with FN and used to measure binding strength between α5β1 integrin and FN by quantifying the force required to break single FN–integrin bonds on a physiological range of loading rates (100–10 000 pN/s). The force necessary to rupture single α5β1–FN bond increased twofold over the regime of loading rates investigated. Changes in Mg²⁺ and Ca²⁺ concentration affected the thermodynamical parameters of the interaction and modulated the binding energy. These data indicate that the external ionic environment in which vascular smooth muscle cells reside, influences the mechanical parameters that define the interaction between the extracellular matrix and integrins. Thus, in a dynamic mechanical environment such as the vascular wall, thermodynamic binding properties between FN and α5β1 integrin vary in relation to locally applied loads and divalent cations concentrations. These changes can be recorded as direct measurements on live smooth muscle cells by using AFM. Copyright © 2009 John Wiley & Sons, Ltd.     

Direct measurement of the interaction force between immunostimulatory CpG-DNA and TLR9 fusion protein

The specific interaction between human Toll-like receptor 9 (TLR9)-ectodomain (ECD)-fusion protein and immunostimulatory CpG-DNA was measured using force spectroscopy. Flexible tethers were used between receptors and surface as well as between DNA and atomic force microscope tip to make efficient recognition studies possible. The molecular recognition forces detected are in the range of 50 to 150 ± 20 pN at the used force-loading rates, and the molecular interaction probability was much reduced when the receptors were blocked with free CpG-DNA. A linear increase of the unbinding force with the logarithm of the loading rate was found over the range 0.1 to 30 nN/s. This indicates a single potential barrier characterizing the energy landscape and no intermediate state for the unbinding pathway of CpG-DNA from the TLR9-ECD. Two important kinetic parameters for CpG-DNA interaction with TLR9-ECD were determined from the force-loading rate dependency: an off-rate of k(off) = 0.14 ± 0.10 s(-1) and a binding interaction length of x(β) = 0.30 ± 0.03 nm, which are consistent with literature values. Various models for the molecular interaction of this innate immune receptor binding to CpG-DNA are discussed.     

Energy landscape of chelated uranyl: antibody interactions by dynamic force spectroscopy

We used dynamic force spectroscopy (DFS) to explore the energy landscape of interactions between a chelated uranyl compound and a monoclonal antibody raised against the uranyl-dicarboxy-phenanthroline complex. We estimated the potential energy barrier widths and the relevant thermodynamic rate constants along the dissociation coordinate. Using atomic force microscopy, four different experimental setups with or without the uranyl ion in the chelate ligand, we have distinguished specific and nonspecific binding in the binding affinity of the uranyl compound to the antibody. The force loading rates for our system were measured from 15 to 26,400 pN/s. The results showed two regimes in the plot of the most probable unbinding force versus the logarithm of the loading rate, revealing the presence of two (at least) activation barriers. Analyses of DFS suggest parallel multivalent binding present in either regime. We have also built a molecular model for the variable fragment of the antibody and used computational graphics to dock the chelated uranyl ion into the binding pocket. The structural analysis led us to hypothesize that the two regimes originate from two interaction modes: the first one corresponds to an energy barrier with a very narrow width of 0.5 +/- 0.2 A, inferring dissociation of the uranyl ion from its first coordination shell (Asp residue); the second one with a broader energy barrier width (3.9 +/- 0.3 A) infers the entire chelate compound dissociated from the antibody. Our study highlights the sensitivity of DFS experiments to dissect protein-metal compound interactions.     

Single molecular dynamic interactions between glycophorin A and lectin as probed by atomic force microscopy

Glycophorin A (GpA) is one of the most abundant transmembrane proteins in human erythrocytes and its interaction with lectins has been studied as model systems for erythrocyte related biological processes. We performed a force measurement study using the force mode of atomic force microscopy (AFM) to investigate the single molecular level biophysical mechanisms involved in GpA-lectin interactions. GpA was mounted on a mica surface or natively presented on the erythrocyte membrane and probed with an AFM tip coated with the monomeric but multivalent Psathyrella velutina lectin (PVL) through covalent crosslinkers. A dynamic force spectroscopy study revealed similar interaction properties in both cases, with the unbinding force centering around 60 pN with a weak loading rate dependence. Hence we identified the presence of one energy barrier in the unbinding process. Force profile analysis showed that more than 70% of GpAs are free of cytoskeletal associations in agreement with previous reports.     

Single molecule studies of antibody-antigen interaction strength versus intra-molecular antigen stability

We investigated molecular recognition of antibodies to membrane-antigens and extraction of the antigens out of membranes at the single molecule level. Using dynamic force microscopy imaging and enzyme immunoassay, binding of anti-sendai antibodies to sendai-epitopes genetically fused into bacteriorhodopsin molecules from purple membranes were detected under physiological conditions. The antibody/antigen interaction strength of 70-170 pN at loading rates of 2-50 nN/second yielded a barrier width of x = 0.12 nm and a kinetic off-rate (corresponding to the barrier height) of k(off) = 6s(-1), respectively. Bacteriorhodopsin unfolding revealed a characteristic intra-molecular force pattern, in which wild-type and sendai-bacteriorhodopsin molecules were clearly distinguishable in their length distributions, originating from the additional 13 amino acid residues epitope in sendai purple membranes. The inter-molecular antibody/antigen unbinding force was significantly lower than the force required to mechanically extract the binding epitope-containing helix pair out of the membrane and unfold it (126 pN compared to 204 pN at the same loading rate), meeting the expectation that inter-molecular unbinding forces are weaker than intra-molecular unfolding forces responsible for stabilizing native conformations of proteins.     

Force spectroscopy of the leukocyte function-associated antigen-1/intercellular adhesion molecule-1 interaction

Interactions between leukocyte function-associated antigen-1 (LFA-1) with its cognate ligand, intercellular adhesion molecule-1 (ICAM-1) play a crucial role in leukocyte adhesion. Because the cell and its adhesive components are subject to external perturbation from the surrounding flow of blood, it is important to understand the binding properties of the LFA-1/ICAM-1 interaction in both steady state and in the presence of an external pulling force. Here we report on atomic force microscopy (AFM) measurements of the unbinding of LFA-1 from ICAM-1. The single molecule measurements revealed the energy landscape corresponding to the dissociation of the LFA-1/ICAM-1 complex and provided the basis for defining the energetic determinants of the complex at equilibrium and under the influence of an external force. The AFM force measurements were performed in an experimental system consisting of an LFA-1-expressing T cell hybridoma, 3A9, attached to the end of the AFM cantilever and an apposing surface expressing ICAM-1. In measurements covering three orders of magnitude change in force loading rate, the LFA-1/ICAM-1 force spectrum (i.e., unbinding force versus loading rate) revealed a fast and a slow loading regime that characterized a steep inner activation barrier and a wide outer activation barrier, respectively. The addition of Mg(2+), a cofactor that stabilizes the LFA-1/ICAM-1 interaction, elevated the unbinding force of the complex in the slow loading regime. In contrast, the presence of EDTA suppressed the inner barrier of the LFA-1/ICAM-1 complex. These results suggest that the equilibrium dissociation constant of the LFA-1/ICAM-1 interaction is regulated by the energetics of the outer activation barrier of the complex, while the ability of the complex to resist a pulling force is determined by the divalent cation-dependent inner activation barrier.     

Measurement of interaction force between nanoarrayed integrin alphavbeta3 and immobilized vitronectin on the cantilever tip

Protein nanoarrays containing integrin alphavbeta3 or BSA were fabricated on ProLinker-coated Au surface by dip-pen nanolithography (DPN). An atomic force microscope (AFM) tip coated with ProLinker was modified by vitronectin. We measured the interaction force between nanoarrayed integrin alphavbeta3 or BSA and immobilized vitronectin on the cantilever tip by employing tethering-unbinding method. The unbinding force between integrin alphavbeta3 and vitronectin (1087+/-62 pN) was much higher than that of between BSA and vitronectin (643+/-74 pN). These results demonstrate that one can distinguish a specific protein interaction from non-specific interactions by means of force measurement on the molecular interactions between the nanoarrayed protein and its interacting protein on the AFM tip.     

Energy landscape of streptavidin-biotin complexes measured by atomic force microscopy

The dissociation of ligand and receptor involves multiple transitions between intermediate states formed during the unbinding process. In this paper, we explored the energy landscape of the streptavidin-biotin interaction by using the atomic force microscope (AFM) to measure the unbinding dynamics of individual ligand-receptor complexes. The rupture force of the streptavidin-biotin bond increased more than 2-fold over a range of loading rates between 100 and 5000 pN/s. Moreover, the force measurements showed two regimes of loading in the streptavidin-biotin force spectrum, revealing the presence of two activation barriers in the unbinding process. Parallel experiments carried out with a streptavidin mutant (W120F) were used to investigate the molecular determinants of the activation barriers. From these experiments, we attributed the outer activation barrier in the energy landscape to the molecular interaction of the '3-4' loop of streptavidin that closes behind biotin.     

鉴定水稻中一个新的专一结合GCC元件的AP2/EREBP族转录因子

TSH1,是通过搜寻GenBank的EST库而获得的一个来源于水稻的含AP2/EREBP保守结构域的蛋白质.为了详细分析TSH1蛋白与其DNA顺式元件的结合特性,首先采用传统的凝胶阻滞实验和酵母单杂交技术,证实TSH1在体内和体外均专一性地结合于GCC元件,然后利用原子力显微镜技术精确测量了TSH1蛋白与GCC元件在单分子水平的相互作用力.结果表明,GST-TSH1与DRE元件没有特异性的结合,而GST-TSH1与GCC元件结合力的大小为(83.9±2.2)pN,这种特异性的结合可以被加入的游离TSH1蛋白明显降低.GST蛋白和突变GCC元件作为负对照显示出与GCC元件无特异性作用力.以上结果充分证明,TSH1是专一性地与GCC元件相作用的转录因子,而且原子力显微镜对于检测转录因子与DNA相互作用时单碱基的突变十分灵敏.通过比较几种评估转录因子与DNA顺式元件结合特异性的方法,阐述了原子力显微镜技术的特点及优越性.     

Hydrodynamic effects in fast AFM single-molecule force measurements

Atomic force microscopy (AFM) allows the critical forces that unfold single proteins and rupture individual receptor–ligand bonds to be measured. To derive the shape of the energy landscape, the dynamic strength of the system is probed at different force loading rates. This is usually achieved by varying the pulling speed between a few nm/s and a few m/s, although for a more complete investigation of the kinetic properties higher speeds are desirable. Above 10 m/s, the hydrodynamic drag force acting on the AFM cantilever reaches the same order of magnitude as the molecular forces. This has limited the maximum pulling speed in AFM single-molecule force spectroscopy experiments. Here, we present an approach for considering these hydrodynamic effects, thereby allowing a correct evaluation of AFM force measurements recorded over an extended range of pulling speeds (and thus loading rates). To support and illustrate our theoretical considerations, we experimentally evaluated the mechanical unfolding of a multi-domain protein recorded at 30 m/s pulling speed.Abbrevations AFM atomic force micrcoscopy - pN piconewton - BR bacteriorhodopsin - DFS dynamic force spectroscopy - Ig27 immunoglobulin 27 - If27-8 immunoglobulin 27 octameric construct - BFP biomembrane force probe     

Dynamic force measurements of avidin-biotin and streptavdin-biotin interactions using AFM

Using atomic force microscopy (AFM) we performed dynamic force measurements of the adhesive forces in two model systems: avidin-biotin and streptavidin-biotin. In our experiments we used glutaraldehyde for immobilization of (strept)avidin on the tip and biotin on the sample surface. Such interface layers are more rigid than those usually reported in the literature for AFM studies, when (strept)avidin is coupled with biotinylated bovine albumin and biotin with agarose polymers. We determined the dependence of the rupture forces of avidin-biotin and streptavidin-biotin bonds in the range 300-9600 pN/s. The slope of a semilogarithmic plot of this relation changes at about 1700 pN/s. The existence of two different regimes indicates the presence of two activation barriers of these complexes during the dissociation process. The dissociation rates and activation energy barriers, calculated from the Bell model, for the avidin-biotin and streptavidin-biotin interactions are similar to each other for loading rates > 1700 pN/s but they are different from each other for loading rates < 1700 pN/s. In the latter case, the dissociation rates show a higher stability of the avidin-biotin complex than the streptavidin-biotin complex due to a larger outer activation barrier of 0.8 k(B)T. The bond-rupture force is about 20 pN higher for the avidin-biotin pair than for the streptavidin-biotin pair for loading rates < 1700 pN/s. These two experimental observations are in agreement with the known structural differences between the biotin binding pocket of avidin and of streptavidin.     

Dengue virus capsid protein binding to hepatic lipid droplets (LD) is potassium ion dependent and is mediated by LD surface proteins

Dengue virus (DENV) affects millions of people, causing more than 20,000 deaths annually. No effective treatment for the disease caused by DENV infection is currently available, partially due to the lack of knowledge on the basic aspects of the viral life cycle, including the molecular basis of the interaction between viral components and cellular compartments. Here, we characterized the properties of the interaction between the DENV capsid (C) protein and hepatic lipid droplets (LDs), which was recently shown to be essential for the virus replication cycle. Zeta potential analysis revealed a negative surface charge of LDs, with an average surface charge of -19 mV. The titration of LDs with C protein led to an increase of the surface charge, which reached a plateau at +13.7 mV, suggesting that the viral protein-LD interaction exposes the protein cationic surface to the aqueous environment. Atomic force microscopy (AFM)-based force spectroscopy measurements were performed by using C protein-functionalized AFM tips. The C protein-LD interaction was found to be strong, with a single (un)binding force of 33.6 pN. This binding was dependent on high intracellular concentrations of potassium ions but not sodium. The inhibition of Na(+)/K(+)-ATPase in DENV-infected cells resulted in the dissociation of C protein from LDs and a 50-fold inhibition of infectious virus production but not of RNA replication, indicating a biological relevance for the potassium-dependent interaction. Limited proteolysis of the LD surface impaired the C protein-LD interaction, and force measurements in the presence of specific antibodies indicated that perilipin 3 (TIP47) is the major DENV C protein ligand on the surface of LDs.     

MAPPING CELL WALL POLYSACCHARIDES OF LIVING MICROBIAL CELLS USING ATOMIC FORCE MICROSCOPY

Functionalized atomic force microscope tips were used to sense specific forces of interaction between ligand—receptor pairs and to map the positions of polysaccharides on a living microbial cell surface. Gold-coated tips were functionalized with concanavalin A using a cross-linker with a spacer arm of 15.6Å. It was possible to measure the binding force between concanavalin A and mannan polymers on the yeast (Saccharomyces cerevisiae) cell surface. This force ranged from 75 to 200pN. The shape of the force curve indicated that the polymers were pulled away from the cell surface for a fairly long distance that sometimes reached several hundred nanometres. The distribution of mannan on the cell surface was mapped by carrying out the force measurement in the force volume mode of atomic force microscopy (AFM). During the measurement, the maximum cantilever deflection after contact between the tip and the sample was kept constant at 10nm using trigger mode to keep the pressing force on the sample surface as gently as possible at a force of 180pN. This regime was used to minimize the non-specific adhesion between the tip and the cell surface. Specific molecular recognition events took place on specific areas of the cell surface that could be interpreted as reflecting a non-uniform distribution of mannan on the cell surface.     

Nonspecific interactions in AFM force spectroscopy measurements

Sample-probe contact duration (dwell time) and loading force are two important parameters for the atomic force microscopy (AFM) force spectroscopy measurements of ligand-receptor interaction. A prolonged contact time may be required to initiate ligand-receptor binding as a result of slow on-rate kinetics or low reactant density. In general, increasing contact duration promotes nonspecific interactions between the substrate and the functionalized cantilever and, thus, masking the detection of the specific interactions. To reduce the nonspecific interactions in AFM force measurements requiring extended substrate-probe contact, we investigated the interaction of bovine serum albumin (BSA)-functionalized cantilever with BSA-coated glass, polyethylene glycol (PEG)-functionalized glass, Pluronic-treated Petri dishes and agarose beads. The frequency of nonspecific interaction between the BSA-functionalized cantilever and the different samples increased with loading force and dwell time. This increase in nonspecific adhesion can be attributed to the interaction mediated by forced unfolding of BSA. By reducing the loading force, the contact duration of the AFM probe with an agarose bead can be extended to a few minutes without nonspecific adhesion.