A review of the off-label use of selamectin (Stronghold<Superscript>®</Superscript>/Revolution<Superscript>®</Superscript>) in dogs and cats

Since its introduction approximately seven years ago, selamectin (Stronghold^®/Revolution^®, Pfizer Inc.) has been used off-label to treat a number of ecto- and endoparasite conditions in dogs and cats. It has been used as a successful prophylactic against Dirofilaria repens and as a treatment for Aelurostrongylus abstrusus in cats. It has also been used to treat notoedric mange, infestation with the nasal mite Pneumonyssoides caninum, Cheyletiella spp. and Neotrombicula autumnalis infestations and larval Cordylobia anthropophaga infection. However, to date attempts to treat generalised canine demodicosis have not been successful. In all cases, treatment was apparently well tolerated by the host.     

Pharmacokinetic comparability of Prolastin<Superscript>®</Superscript>-C to Prolastin<Superscript>®</Superscript> in alpha<Subscript>1</Subscript>-antitrypsin deficiency: a randomized study

Background

Alpha₁-antitrypsin (AAT) deficiency is characterized by low blood levels of alpha₁-proteinase inhibitor (alpha₁-PI) and may lead to emphysema. Alpha₁-PI protects pulmonary tissue from damage caused by the action of proteolytic enzymes. Augmentation therapy with Prolastin^® (Alpha₁-Proteinase Inhibitor [Human]) to increase the levels of alpha₁-PI has been used to treat individuals with AAT deficiency for over 20 years. Modifications to the Prolastin manufacturing process, incorporating additional purification and pathogen-reduction steps, have led to the development of an alpha₁-PI product, designated Prolastin^®-C (Alpha₁-Proteinase inhibitor [Human]). The pharmacokinetic comparability of Prolastin-C to Prolastin was assessed in subjects with AAT deficiency.

Methods

In total, 24 subjects were randomized to receive 60 mg/kg of functionally active Prolastin-C or Prolastin by weekly intravenous infusion for 8 weeks before crossover to the alternate treatment for another 8 weeks. Pharmacokinetic plasma samples were drawn over 7 days following last dose in the first treatment period and over 10 days following the last dose in the second period. The primary end point for pharmacokinetic comparability was area under the plasma concentration versus time curve over 7 days post dose (AUC_{0-7 days}) of alpha₁-PI determined by potency (functional activity) assay. The crossover phase was followed by an 8-week open-label treatment phase with Prolastin-C only.

Results

Mean AUC_{0-7 days} was 155.9 versus 152.4 mg*h/mL for Prolastin-C and Prolastin, respectively. The geometric least squares mean ratio of AUC_{0-7 days} for Prolastin-C versus Prolastin had a point estimate of 1.03 and a 90% confidence interval of 0.97-1.09, demonstrating pharmacokinetic equivalence between the 2 products. Adverse events were similar for both treatments and occurred at a rate of 0.117 and 0.078 per infusion for Prolastin-C (double-blind treatment phase only) and Prolastin, respectively (p = 0.744). There were no treatment-emergent viral infections in any subject for human immunodeficiency virus, hepatitis B or C, or parvovirus B19 during the course of the study.

Conclusion

Prolastin-C demonstrated pharmacokinetic equivalence and a comparable safety profile to Prolastin.

Trial Registration

ClinicalTrials.gov Identifier: NCT00295061

     

YUPI<Superscript>®</Superscript>, a regional footprint calculator

Purpose

Many tools to quantify the environmental impact of human decisions have been developed, but all of them seem to have a limited application at the regional or local level. A free-of-charge, Argentina-based personal footprint calculator software (YUPI^®) has been developed in order to raise awareness among local citizens about the environmental impacts generated by their daily habits. The extensive use of the tool will generate information suitable for future scientific studies based on local data.

Methods

The software calculates the ecological, carbon, and water footprints of individuals, implementing specific regional data from Argentina developed by the CLIOPE group, complemented with data from the Water Footprint Network and the Global Footprint Network. The calculator was developed focusing on interface attractiveness, ease of use, language simplicity, and a good trade-off between completion time and fullness.

Results and discussion

The YUPI^® software allows its users to understand at a glance their contribution to the environmental impacts of modern society and to quantify the reduction opportunities they have at hand. The program’s language and variables reflect local lifestyle choices, making the filling process accessible for children. The calculator was placed online as an educational tool for teachers and students from all educational levels, and it was also used by visitors in local science and educational fairs. Valuable data was collected for future initiatives on impact mitigation.

Conclusions

Amplified by the mass media, the new tool has helped raise awareness and discussion about the individual environmental footprint, both in the educational and in the domestic terrain. The strategy of creating a simple, easily administered, and widely available quiz helped bridge the gap between the academy and the people, making available to them the continuously updated information generated by the research groups. This is facilitating citizen not only to understand the complexity of the environmental problems but also to take informed actions leading to their mitigation.

     

Simple generation of site-directed point mutations in the <Emphasis Type="Italic">Escherichia coli</Emphasis> chromosome using Red<Superscript>®</Superscript>/ET<Superscript>®</Superscript> Recombination

Background  

Introducing point mutations into bacterial chromosomes is important for further progress in studies relying on functional genomics, systems- and synthetic biology, and for metabolic engineering. For many investigations, chromosomal systems are required rather than artificial plasmid based systems.     

Comparison of Alexa Fluor<Superscript>®</Superscript> and CyDye<Superscript>™</Superscript> for practical DNA microarray use

Microarrays are a powerful tool for comparison and understanding of gene expression levels in healthy and diseased states. The method relies upon the assumption that signals from microarray features are a reflection of relative gene expression levels of the cell types under investigation. It has previously been reported that the classical fluorescent dyes used for microarray technology, Cy3 and Cy5, are not ideal due to the decreased stability and fluorescence intensity of the Cy5 dye relative to the Cy3, such that dye bias is an accepted phenomena necessitating dye swap experimental protocols and analysis of differential dye affects. The incentive to find new fluorophores is based on alleviating the problem of dye bias through synonymous performance between counterpart dyes. Alexa Fluor 555 and Alexa Fluor 647 are increasingly promoted as replacements for CyDye in microarray experiments. Performance relates to the molecular and steric similarities, which will vary for each new pair of dyes as well as the spectral integrity for the specific application required. Comparative analysis of the performance of these two competitive dye pairs in practical microarray applications is warranted towards this end. The findings of our study showed that both dye pairs were comparable but that conventional CyDye resulted in significantly higher signal intensities (P < 0.05) and signal minus background levels (P < 0.05) with no significant difference in background values (P > 0.05). This translated to greater levels of differential gene expression with CyDye than with the Alexa Fluor counterparts. However, CyDye fluorophores and in particular Cy5, were found to be less photostable over time and following repeated scans in microarray experiments. These results suggest that precautions against potential dye affects will continue to be necessary and that no one dye pair negates this need.     

Rapid measurement of <Superscript>3</Superscript>J(H<Superscript>N</Superscript>–H<Superscript>α</Superscript>) and <Superscript>3</Superscript>J(N–H<Superscript>β</Superscript>) coupling constants in polypeptides

We present two NMR experiments, (3,2)D HNHA and (3,2)D HNHB, for rapid and accurate measurement of 3J(H N-H alpha) and 3J(N-H beta) coupling constants in polypeptides based on the principle of G-matrix Fourier transform NMR spectroscopy and quantitative J-correlation. These experiments, which facilitate fast acquisition of three-dimensional data with high spectral/digital resolution and chemical shift dispersion, will provide renewed opportunities to utilize them for sequence specific resonance assignments, estimation/characterization of secondary structure with/without prior knowledge of resonance assignments, stereospecific assignment of prochiral groups and 3D structure determination, refinement and validation. Taken together, these experiments have a wide range of applications from structural genomics projects to studying structure and folding in polypeptides.     

A <Superscript>13</Superscript>C-detected <Superscript>15</Superscript>N double-quantum NMR experiment to probe arginine side-chain guanidinium <Superscript>15</Superscript>N<Superscript>η</Superscript> chemical shifts

Arginine side-chains are often key for enzyme catalysis, protein–ligand and protein–protein interactions. The importance of arginine stems from the ability of the terminal guanidinium group to form many key interactions, such as hydrogen bonds and salt bridges, as well as its perpetual positive charge. We present here an arginine ¹³C^ζ-detected NMR experiment in which a double-quantum coherence involving the two ¹⁵N^η nuclei is evolved during the indirect chemical shift evolution period. As the precession frequency of the double-quantum coherence is insensitive to exchange of the two ¹⁵N^η; this new approach is shown to eliminate the previously deleterious line broadenings of ¹⁵N^η resonances caused by the partially restricted rotation about the C^ζ–N^ε bond. Consequently, sharp and well-resolved ¹⁵N^η resonances can be observed. The utility of the presented method is demonstrated on the L99A mutant of the 19 kDa protein T4 lysozyme, where the measurement of small chemical shift perturbations, such as one-bond deuterium isotope shifts, of the arginine amine ¹⁵N^η nuclei becomes possible using the double-quantum experiment.     

CD14<Superscript>++</Superscript>CD16<Superscript>−</Superscript> and CD14<Superscript>+</Superscript>CD16<Superscript>+</Superscript> human monocyte adhesion to endothelial cells

Based on the difference in the CD14 and CD16 expression, two subsets of monocytes were identified in human and other mammalian blood. These subsets have different patterns of adhesion molecules and chemokine receptors that suggests the different mode of their interaction with endothelium and tissue traffic. Here, we investigated the ability of CD14⁺CD16⁺ and CD14⁺⁺CD16⁻ monocytes to adhere to endothelial cell monolayer in presence or absence of pro- and anti-inflammatory cytokines. We demonstrated that CD14⁺CD16⁺ monocytes had a higher level of adhesion to intact monolayer of endothelial cells than CD14⁺⁺CD16⁻ monocytes. Adhesion of CD14⁺⁺CD16⁻ and CD14⁺CD16⁺ monocytes significantly increased in the presence of TNFα or its combination with other cytokines. IFNγ and IL-4 alone did not affect the adhesion of monocytes. These results show that CD14⁺⁺CD16⁻ and CD14⁺CD16⁺ monocytes can be recruited to the inflamed endothelium, but CD14⁺CD16⁺ monocytes adhere to endothelial cells without inflammations twice as strongly as CD14⁺⁺CD16⁻ monocytes.     

Flow of Deposited Inorganic N in Two Gleysol-dominated Mountain Catchments Traced with <Superscript>15</Superscript>NO<Subscript>3</Subscript><Superscript>−</Superscript> and <Superscript>15</Superscript>NH<Subscript>4</Subscript><Superscript>+</Superscript>

In two mountain ecosystems at the Alptal research site in central Switzerland, pulses of ¹⁵NO₃ and ¹⁵NH₄ were separately applied to trace deposited inorganic N. One forested and one litter meadow catchment, each approximately 1600 m², were delimited by trenches in the Gleysols. K¹⁵NO₃ was applied weekly or fortnightly over one year with a backpack sprayer, thus labelling the atmospheric nitrate deposition. After the sampling and a one-year break, ¹⁵NH₄Cl was applied as a second one-year pulse, followed by a second sampling campaign. Trees (needles, branches and bole wood), ground vegetation, litter layer and soil (LF, A and B horizon) were sampled at the end of each labelling period. Extractable inorganic N, microbial N, and immobilised soil N were analysed in the LF and A horizons. During the whole labelling period, the runoff water was sampled as well. Most of the added tracer remained in both ecosystems. More NO₃⁻ than NH₄⁺ tracer was retained, especially in the forest. The highest recovery was in the soil, mainly in the organic horizon, and in the ground vegetation, especially in the mosses. Event-based runoff analyses showed an immediate response of ¹⁵NO₃⁻ in runoff, with sharp ¹⁵N peaks corresponding to discharge peaks. NO₃⁻ leaching showed a clear seasonal pattern, being highest in spring during snowmelt. The high capacity of N retention in these ecosystems leads to the assumption that deposited N accumulates in the soil organic matter, causing a progressive decline of its C:N ratio.     

<Superscript>1</Superscript>H–<Superscript>15</Superscript>N correlation spectroscopy of nanocrystalline proteins

The limits of resolution that can be obtained in ¹H–¹⁵N 2D NMR spectroscopy of isotopically enriched nanocrystalline proteins are explored. Combinations of frequency switched Lee–Goldburg (FSLG) decoupling, fast magic angle sample spinning (MAS), and isotopic dilution via deuteration are investigated as methods for narrowing the amide ¹H resonances. Heteronuclear decoupling of ¹⁵N from the ¹H resonances is also studied. Using human ubiquitin as a model system, the best resolution is most easily obtained with uniformly ²H and ¹⁵N enriched protein where the amides have been exchanged in normal water, MAS at 20 kHz, and WALTZ-16 decoupling of the ¹⁵N nuclei. The combination of these techniques results in average ¹H lines of only 0.26 ppm full width at half maximum. Techniques for optimizing instrument stability and ¹⁵N decoupling are described for achieving the best possible performance in these experiments.     

Estimation of denitrification potential in a karst aquifer using the <Superscript>15</Superscript>N and <Superscript>18</Superscript>O isotopes of NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>

A confined aquifer in the Malm Karst of the Franconian Alb, South Germany was investigated in order to understand the role of the vadose zone in denitrifiaction processes. The concentrations of chemical tracers Sr²⁺ and Cl^– and concentrations of stable isotope ¹⁸O were measured in spring water and precipitation during storm events. Based on these measurements a conceptual model for runoff was constructed. The results indicate that pre-event water, already stored in the system at the beginning of the event, flows downslope on vertical and lateral preferential flow paths. Chemical tracers used in a mixing model for hydrograph separation have shown that the pre-event water contribution is up to 30%. Applying this information to a conceptual runoff generation model, the values of ¹⁵N and ¹⁸O in nitrate could be calculated. Field observations showed the occurence of significant microbial denitrification processes above the soil/bedrock interface before nitrate percolates through to the deeper horizon of the vadose zone. The source of nitrate could be determined and denitrification processes were calculated. Assuming that the nitrate reduction follows a Rayleigh process one could approximate a nitrate input concentration of about 170 mg/l and a residual nitrate concentration of only about 15%. The results of the chemical and isotopic tracers postulate fertilizers as nitrate source with some influence of atmospheric nitrate. The combined application of hydrograph separation and determination of isotope values in ¹⁵N and ¹⁸O of nitrate lead to an improved understanding of microbial processes (nitrification, denitrification) in dynamic systems.     

Carbonyl carbon label selective (CCLS) <Superscript>1</Superscript>H–<Superscript>15</Superscript>N HSQC experiment for improved detection of backbone <Superscript>13</Superscript>C–<Superscript>15</Superscript>N cross peaks in larger proteins

We present a highly sensitive pulse sequence, carbonyl carbon label selective ¹H–¹⁵N HSQC (CCLS-HSQC) for the detection of signals from ¹H–¹⁵N units involved in ¹³C′–¹⁵N linkages. The CCLS-HSQC pulse sequence utilizes a modified ¹⁵N CT evolution period equal to 1/( ) (∼33 ms) to select for ¹³C′–¹⁵N pairs. By collecting CCLS-HSQC and HNCO data for two proteins (8 kDa ubiquitin and 20 kDa HscB) at various temperatures (5–40°C) in order to vary correlation times, we demonstrate the superiority of the CCLS-HSQC pulse sequence for proteins with long correlation times (i.e. higher molecular weight). We then show that the CCLS-HSQC experiment yields assignments in the case of a 41 kDa protein incorporating pairs of ¹⁵N- and ¹³C′-labeled amino acids, where a TROSY 2D-HN(CO) had failed. Although the approach requires that the ¹H–¹⁵N HSQC cross peaks be observable, it does not require deuteration of the protein. The method is suitable for larger proteins and is less affected by conformational exchange than HNCO experiments, which require a longer period of transverse ¹⁵N magnetization. The method also is tolerant to the partial loss of signal from isotopic dilution (scrambling). This approach will be applicable to families of proteins that have been resistant to NMR structural and dynamic analysis, such as large enzymes, and partially folded or unfolded proteins.     

Structures and stability of N<Subscript>13</Subscript><Superscript>+</Superscript> and N<Subscript>13</Subscript><Superscript>−</Superscript> clusters

The structures and stabilities of eleven N₁₃ ⁺ and N₁₃ ^– isomers have been investigated with second-order Møller–Plesset (MP2) and density functional theory (DFT) methods. Five N₁₃ ⁺ isomers and six N₁₃ ^– isomers are all reasonable local minima on their potential energy hypersurfaces. The most stable N₁₃ ⁺ cation is structure C-2 with C_2v symmetry, which contains a pentazole ring and two N₄ open chains. It is different from those of the N₇ ⁺ and N₉ ⁺ clusters, but similar to the N₁₁ ⁺ cluster. Meanwhile, the most stable N₁₃ ^– structure A-2 is composed of a pentazole ring and a six-membered ring connected by two nitrogen atoms. It is not only different from those of the N₇ ^– and N₉ ^– clusters, but also from the N₁₁ ^– cluster. The decomposition pathways of structures C-2 and A-2 were investigated at the B3LYP/(aug)-cc-pVDZ level. From the barrier heights of the structures C-2 and A-2 decomposition processes, it is suggested that C-2 is difficult to observe experimentally and A-2 may be observed as a short-lived species. Figure Optimized geometrical parameters of N₁₃ ⁺ isomer C-2      

Determination of the lifetime of D<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and HD<Superscript>−</Superscript> ions

A method for determining the lifetime of unstable ions is described. The method is based on measuring the decrease in the ion beam current onto a fixed detector with increasing path length of the ion beam from the ion source to the detector. The measurements performed for D^? ₂ and HD^? molecular ions have shown that their lifetimes are 3.5 ± 0.1 and 4.4 ± 0.1 μs, respectively.     

<Superscript>1</Superscript>H, <Superscript>13</Superscript>C,and <Superscript>15</Superscript>N resonance assignments for the pro-inflammatory cytokine interleukin-36α

Interleukin-36α (IL-36α) is a recently characterised member of the interleukin-1 superfamily. It is involved in the pathogenesis of inflammatory arthritis in one third of psoriasis patients. By binding of IL-36α to its receptor IL-36R via the NF-κB pathway other cytokines involved in inflammatory and apoptotic cascade are activated. The efficacy of complex formation is controlled by N-terminal processing. To obtain a more detailed view on the structure function relationship we performed a heteronuclear multidimensional NMR investigation and here report the ¹H, ¹³C, and ¹⁵N resonance assignments for the backbone and side chain nuclei of the pro-inflammatory cytokine interleukin-36α.     

Sequential nearest-neighbor effects on computed <Superscript>13</Superscript>C<Superscript>α</Superscript> chemical shifts

To evaluate sequential nearest-neighbor effects on quantum-chemical calculations of ¹³C^α chemical shifts, we selected the structure of the nucleic acid binding (NAB) protein from the SARS coronavirus determined by NMR in solution (PDB id 2K87). NAB is a 116-residue α/β protein, which contains 9 prolines and has 50% of its residues located in loops and turns. Overall, the results presented here show that sizeable nearest-neighbor effects are seen only for residues preceding proline, where Pro introduces an overestimation, on average, of 1.73 ppm in the computed ¹³C^α chemical shifts. A new ensemble of 20 conformers representing the NMR structure of the NAB, which was calculated with an input containing backbone torsion angle constraints derived from the theoretical ¹³C^α chemical shifts as supplementary data to the NOE distance constraints, exhibits very similar topology and comparable agreement with the NOE constraints as the published NMR structure. However, the two structures differ in the patterns of differences between observed and computed ¹³C^α chemical shifts, Δ _ca,i , for the individual residues along the sequence. This indicates that the Δ _ca,i -values for the NAB protein are primarily a consequence of the limited sampling by the bundles of 20 conformers used, as in common practice, to represent the two NMR structures, rather than of local flaws in the structures.     

New Nanometric Solid Dispersions of Glibenclamide in Neusilin<Superscript>®</Superscript> UFL2

To improve the poor water solubility and dissolution rate of the oral hypoglycemic drug glibenclamide, it was molecularly dispersed in Neusilin^® UFL2, an amorphous synthetic form of magnesium aluminometasilicate, at different proportions; the physicochemical and biopharmaceutical properties, as well as the stability of the four different batches recovered were characterised, and it was determined that complete dispersion of glibenclamide in the amorphous polymer was obtained at the drug to Neusilin ratio of 1 to 2.5. Completely amorphous dispersion was proven by Thermal Analysis and X-Ray Powder Diffractometry. Very small particles were obtained, ranging from approximately 200 to 400 nm. The amorphous batches were physically and chemically stable for the entire duration of experiments. The physicochemical properties of the four batches were compared to those of the starting materials and physical mixtures of Neusilin^® UFL2 and glibenclamide, the latter showing the typical behaviour of simple mixes, i.e., the additivity of properties of single components. The dissolution studies of the four solid dispersions revealed a very high dissolution rate of the completely amorphous batches (Batches 3 and 4), behaviour that was ascribed to their high Intrinsic dissolution rate due to the amorphous characteristics of the solid dispersions, to their very small particle size, and to the presence of polysorbate 80 that improved solid wettability. The technique under investigation thus proved effective for recovering stable amorphous dispersions of very small particle sizes.     

Accuracy of the StressEraser<Superscript>®</Superscript> in the Detection of Cardiac Rhythms

StressEraser is a commercially marketed biofeedback device designed to enhance heart rate variability. StressEraser makes its internal calculations on beat-to-beat measures of finger pulse intervals. However, the accuracy and precision of StressEraser in quantifying interbeat intervals using finger pulse intervals has not been evaluated against standard laboratory equipment using R-R intervals. Accuracy was assessed by simultaneously recording interbeat intervals using StressEraser and a standard laboratory ECG system. The interbeat intervals were highly correlated between the systems. The average deviation in interbeat interval recordings between the systems was approximately 6 ms. Moreover, correlations approached unity between the systems on estimates of heart period, heart rate, and heart rate variability. Feedback from StressEraser is based on an interbeat time series that provides sufficient information to provide an excellent estimate of the dynamic changes in heart rate and heart rate variability. The slight variations between StressEraser and the laboratory equipment in quantifying heart rate and heart rate variability are due to features related to monitoring heart rate with finger pulse: (1) a lack in precision in the peak of the finger pulse relative to the clearly defined inflection point in the R-wave, and (2) contribution of variations in pulse transit time.