pH-control modes in a 5-L stirred-tank bioreactor for cell biomass and exopolysaccharide production by Tremella fuciformis spore

The effect of pH-control modes on cell growth and exopolysaccharide production by Tremella fuciformis was evaluated in a 5-L bioreactor. The results show that the maximal dry cell weight (DCW) and exopolysaccharide production were 23.57 and 4.48 g L⁻¹ in pH-stat fermentation, where the maximal specific growth rate (μ_max) and specific production rate of exopolysaccharide (P_P/X) were 1.03 and 0.24 d⁻¹, respectively; under pH-shift cultivation, the maximal DCW and exopolysaccharide production were 30.57 and 3.90 g L⁻¹, where the μ_max and P_P/X were 1.21 and 0.06 d⁻¹. Unlike batch fermentation, maximal DCW and exopolysaccharide production merely reached 15.04 and 2.0 g L⁻¹, where the μ_max and P_P/X were 0.86 and 0.05 d⁻¹, respectively. These results suggest that a pH-stat strategy is a more efficient way of performing the fermentation process to increase exopolysaccharide production. Furthermore, this research has also proved that the three-stage pH-control mode is effective for cell growth.     

Cultivation of microalgae for oil production with a cultivation strategy of urea limitation

The microalgae, Chlorella sp., were cultivated in various culture modes to assess biomass and lipid productivity in this study. In the batch mode, the biomass concentrations and lipid content of Chlorella sp. cultivated in a medium containing 0.025–0.200 g L⁻¹ urea were 0.464–2.027 g L⁻¹ and 0.661–0.326 g g⁻¹, respectively. The maximum lipid productivity of 0.124 g d⁻¹ L⁻¹ occurred in a medium containing 0.100 g L⁻¹ urea. In the fed-batch cultivation, the highest lipid content was obtained by feeding 0.025 g L⁻¹ of urea during the stationary phase, but the lipid productivity was not significantly increased. However, a semi-continuous process was carried out by harvesting the culture and renewing urea at 0.025 g L⁻¹ each time when the cultivation achieved the early stationary phase. The maximum lipid productivity of 0.139 g d⁻¹ L⁻¹ in the semi-continuous culture was highest in comparison with those in the batch and fed-batch cultivations.     

Comparison of polysialic acid production in Escherichia coli K1 during batch cultivation and fed-batch cultivation applying two different control strategies

The polysialic acid (PSA) production in Escherichia coli (E. coli) K1 was studied using three different cultivation strategies. A batch cultivation, a fed-batch cultivation at a constant specific growth rate of 0.25 h⁻¹ and a fed-batch cultivation at a constant glucose concentration of 50 mg l⁻¹ was performed. PSA formation kinetics under different cultivation strategies were analyzed based on the Monod growth model and the Luedeking-Piret equation. The results revealed that PSA formation in E. coli K1 was completely growth associated, the highest specific PSA formation rate (0.0489 g g⁻¹ h⁻¹) was obtained in the batch cultivation. However, comparing biomass and PSA yields on the glucose consumed, both fed-batch cultivations provided higher yields than that of the batch cultivation and acetate formation was prevented. Moreover, PSA yield on glucose was also correlated to the specific growth rate of the cells. The optimal specific growth rate for PSA production was 0.32 h⁻¹ obtained in the fed-batch cultivation at a constant glucose concentration of 50 mg l⁻¹, with highest conversion efficiency of 43 mg g⁻¹.     

In silico optimization and low structured kinetic model of poly[(R)-3-hydroxybutyrate] synthesis by Cupriavidus necator DSM 545 by fed-batch cultivation on glycerol

Glycerol was utilized by Cupriavidus necator DSM 545 for production of poly-3-hydroxybutyrate (PHB) in fed-batch fermentation. Maximal specific growth rates (0.12 and 0.3 h⁻¹) and maximal specific non-growth PHB production rate (0.16 g g⁻¹ h⁻¹) were determined from two experiments (inocula from exponential and stationary phase). Saturation constants for nitrogen (0.107 and 0.016 g L⁻¹), glycerol (0.05 g L⁻¹), non-growth related PHB synthesis (0.011 g L⁻¹) and nitrogen/PHB related inhibition constant (0.405 g L⁻¹), were estimated. Five relations for specific growth rate were tested using mathematical models. In silico performed optimization procedures (varied glycerol/nitrogen ratio and feeding) has resulted in a PHB content of 70.9%, shorter cultivation time (23 h) and better PHB yield (0.347 g g⁻¹). Initial concentration of biomass 16.8 g L⁻¹ and glycerol concentration in broth between 3 and 5 g L⁻¹ were decisive factors for increasing of productivity.     

Vertical tubular photobioreactor for semicontinuous culture of Cyanobium sp

We evaluated the kinetic culture characteristics of the microalgae Cyanobium sp. grown in vertical tubular photobioreactor in semicontinuous mode. Cultivation was carried out in vertical tubular photobioreactor for 2 L, in 57 d, at 30 °C, 3200 Lux, and 12 h light/dark photoperiod. The maximum specific growth rate was found as 0.127 d⁻¹, when the culture had blend concentration of 1.0 g L⁻¹, renewal rate of 50%, and sodium bicarbonate concentration of 1.0 g L⁻¹. The maximum values of productivity (0.071 g L⁻¹ d⁻¹) and number of cycles (10) were observed in blend concentration of 1.0 g L⁻¹, renewal rate of 30%, and bicarbonate concentration of 1.0 g L⁻¹. The results showed the potential of semicontinuous cultivation of Cyanobium sp. in closed tubular bioreactor, combining factors such as blend concentration, renewal rate, and sodium bicarbonate concentration.     

Alkyl-methylimidazolium ionic liquids affect the growth and fermentative metabolism of Clostridium sp

In this study, the effect of ionic liquids, 1-ethyl-3-methylimidazolium acetate [EMIM][Ac], 1-ethyl-3-methylimidazolium diethylphosphate [EMIM][DEP], and 1-methyl-3-methylimidazolium dimethylphosphate [MMIM][DMP] on the growth and glucose fermentation of Clostridium sp. was investigated. Among the three ionic liquids tested, [MMIM][DMP] was found to be least toxic. Growth of Clostridium sp. was not inhibited up to 2.5, 4 and 4 g L⁻¹ of [EMIM][Ac], [EMIM][DEP] and [MMIM][DMP], respectively. [EMIM][Ac] at <2.5 g L⁻¹, showed hormetic effect and stimulated the growth and fermentation by modulating medium pH. Total organic acid production increased in the presence of 2.5 and 2 g L⁻¹ of [EMIM][Ac] and [MMIM][DMP]. Ionic liquids had no significant influence on alcohol production at <2.5 g L⁻¹. Total gas production was affected by ILs at ?2.5 g L⁻¹ and varied with type of methylimidazolium IL. Overall, the results show that the growth and fermentative metabolism of Clostridium sp. is not impacted by ILs at concentrations below 2.5 g L⁻¹.     

Comparison of stirred tank and airlift bioreactors in the production of polygalacturonases by Aspergillus oryzae

The production of endo and exo-polygalacturonase (PG) by Aspergillus oryzae IPT 301 was studied in a stirred tank bioreactor (STR) and an internal circulation airlift bioreactor. Using a factorial experimental design, a soluble culture medium was defined which allowed the production of exo- and endo-PG comparable to that obtained in a medium containing suspended wheat bran. The soluble medium was used in tests to compare the production of these enzymes in the STR and airlift bioreactor. In these tests, after 96 h, maximum enzymatic activity values achieved for exo- and endo-PG were 65.2 units (U) per mL and 91.3 U mL⁻¹, in the STR, with similar activity values of 60.6 U mL⁻¹ and 86.2 U mL⁻¹, respectively, being achieved in the airlift bioreactor. The airlift bioreactor also showed satisfactory results regarding the oxygen transfer rate in this process, indicating its potential to be used in an eventual larger scale production of exo- and endo-PG, with lower costs for both installation and operation.     

Modeling of biomass production by Spirulinaplatensis as function of phosphate concentrations and pH regimes

Batch cultivations were performed to evaluate the influence of phosphate concentrations (0.25, 0.5, 0.75, and 1.0 g L⁻¹) for pH regimes (9.5, 10.0, and 10.5) on the biomass production by Spirulina platensis. The best condition for cell growth (3.099 g L⁻¹) was found at 0.5 g L⁻¹ phosphate and pH value of 10.0. Cultivation time, phosphate, and pH caused to increase significantly (p < 0.01) in biomass production by S. platensis. Lag time was observed up to 4 h. After then, biomass production increased sharply (p < 0.01) from 0.020 g L⁻¹ to 2.063, 2.213, 1.532, and 0.797 g L⁻¹ at 0.25, 0.5, 0.75, and 1.0 g L⁻¹ phosphate values, respectively. Modified Gompertz model could be regarded as sufficient to describe the biomass production by S. platensis with high determination coefficients and low sum of square value indicated that. Biological parameters for biomass production were successfully predicted by modified Gompertz model.     

Inter-population variability of leaf morpho-anatomical and terpenoid patterns of Pistacia atlantica Desf. ssp. atlantica growing along an aridity gradient in Algeria

Three Algerian populations of female Pistacia atlantica shrubs were investigated in order to check whether their terpenoid contents and morpho-anatomical parameters may characterize the infraspecific variability. The populations were sampled along a gradient of increasing aridity from the Atlas mountains into the northwestern Central Sahara.As evidenced by Scanning Electron Microscopy, tufted hairs could be found only on seedling leaves from the low aridity site as a population-specific trait preserved also in culture. Under common garden cultivation seedlings of the high aridity site showed a three times higher density of glandular trichomes compared to the low aridity site. Increased aridity resulted also in reduction of leaf sizes while their thickness increased. Palisade parenchyma thickness also increases with aridity, being the best variable that discriminates the three populations of P. atlantica.Analysis of terpenoids from the leaves carried out by GC-MS reveals the presence of 65 compounds. The major compounds identified were spathulenol (23 μg g⁻¹ dw), α-pinene (10 μg g⁻¹ dw), verbenone (7 μg g⁻¹ dw) and β-pinene (6 μg g⁻¹ dw) in leaves from the low aridity site; spathulenol (73 μg g⁻¹ dw), α-pinene (25 μg g⁻¹ dw), β-pinene (18 μg g⁻¹ dw) and γ-amorphene (16 μg g⁻¹ dw) in those from medium aridity and spathulenol (114 μg g⁻¹ dw), α-pinene (49 μg g⁻¹ dw), germacrene D (29 μg g⁻¹ dw) and camphene (23 μg g⁻¹ dw) in leaves from the high aridity site. Terpene concentrations increased with the degree of aridity: the highest mean concentration of monoterpenes (136 μg g⁻¹ dw), sesquiterpenes (290 μg g⁻¹ dw) and total terpenes (427 μg g⁻¹ dw) were observed in the highest arid site and are, respectively, 3-, 5- and 4-fold higher compared to the lower arid site. Spathulenol and α-pinene can be taken as chemical markers of aridity. Drought discriminating compounds in low, but detectable concentrations are δ-cadinene and β-copaene. The functional roles of the terpenoids found in P. atlantica leaves and principles of their biosynthesis are discussed with emphasis on the mechanisms of plant resistance to drought conditions.     

Sorgoleone,a sorghum root exudate: Algicidal activity and acute toxicity to the ricefish Oryzias latipes

The discovery of natural and natural-based compounds has resulted in its application as an alternative to synthetic algicides to control harmful algae in aquatic systems. Of the many natural-product-based algicides, sorgoleone, a natural plant product from Sorghum bicolor root exudates has been investigated for its controlling effect on different algal species and its acute fish toxicity. Growth of the blue green algal species Microcystis aeruginosa Kützing was completely inhibited by the crude methanol extract of sorghum root at 20 μg mL⁻¹. The most noticeable inhibition was observed in the bioassay of n-hexane soluble extract, where 98% growth inhibition occurred in M. aeruginosa at the concentration of 1.25 μg mL⁻¹. Sorgoleone very effectively controlled blue green algae inhibiting 97% of M. aeruginosa at 0.5 μg mL⁻¹ and 99% of Anabaena affinis Lemmermann at 4 μg mL⁻¹. In contrast, inhibition of the green algae species Chlorella vulgaris Beijerinck and Scenedensmus spp. at 16 μg mL⁻¹ sorgoleone was 87 and 68%, respectively. There were no mortalities or adverse effects observed in any of the fish exposed to water control, solvent control, and a nominal concentration of 1 μg mL⁻¹ during the test period. The no observed effect concentration (NOEC) value was 1.5 μg mL⁻¹ for the tested fish (O. latipes). Sorgoleone can be considered as an effective and an ecologically and environmentally sustainable approach to controlling harmful algae.     

Increased lipid production of the marine oleaginous microalgae Isochrysis zhangjiangensis (Chrysophyta) by nitrogen supplement

Effects of nitrate feeding on the cell growth and lipid accumulation of marine microalgae Isochrysis zhangjiangensis were investigated. When nitrate was supplied at interval of 24 h, instead of 72 h, a high lipid content of 40.9% and a biomass density of 3.1 g L⁻¹ were obtained. To confirm whether I. zhangjiangensis accumulates lipid during nitrogen-repletion, a two-stage cultivation method was applied. This algal strain had a high lipid content during sustained nitrate addition and showed a high carbohydrate content under nitrate-depletion conditions. These results revealed that this algal strain can accumulate lipids under nitrogen-repletion conditions and accumulate carbohydrate under nitrogen-depletion conditions. When cultured in an extremely high nitrate concentration, 9 g L⁻¹ at 24 h intervals, the growth of algal cells was suppressed, but the highest lipid content of 53% was attained. This special characteristic of lipid accumulation makes I. zhangjiangensis an ideal candidate for producing biodiesel using N-rich wastewater.     

Development of an industrial ethanol-producing yeast strain for efficient utilization of cellobiose

The BGL1 gene, encoding β-glucosidase in Saccharomycopsis fibuligera, was intracellular, secreted or cell-wall associated expressed in an industrial strain of Saccharomyces cerevisiae. The obtained recombinant strains were studied under aerobic and anaerobic conditions. The results indicated that both the wild type and recombinant strain expressing intracellular β-glucosidase cannot grow in medium using cellobiose as sole carbon source. As for the recombinant EB1 expressing secreted enzyme and WB1 expressing cell-wall associated enzyme, the maximum specific growth rates (μ_max) could reach 0.03 and 0.05 h⁻¹ under anaerobic conditions, respectively. Meanwhile, the surface-engineered S. cerevisiae utilized 5.2 g cellobiose L⁻¹ and produced 2.3 g ethanol L⁻¹ in 48 h, while S. cerevisiae secreting β-glucosidase into culture broth used 3.6 g cellobiose L⁻¹ and produced 1.5 g ethanol L⁻¹ over the same period, but no-full depletion of cellobiose were observed for both the used recombinant strains. The results suggest that S. cerevisiae used in industrial ethanol production is deficient in cellobiose transporter. However, when β-glucoside permease and β-glucosidase were co-expressed in this strain, it could uptake cellobiose and showed higher growth rate (0.11 h⁻¹) on cellobiose.     

Assessment of olive-mill wastewater as a growth medium for lipase production by Candida cylindracea in bench-top reactor

Olive-mill wastewater (OMW) was investigated for its suitability to serve as a medium for lipase production by Candida cylindracea NRRL Y-17506. The OMW that best supported enzyme production was characterized by low COD and low total sugars content. In shake flask batch cultures, OMW supplementation with 2.4 g l⁻¹ NH₄Cl and 3 g l⁻¹ olive oil led to an enzyme activity of about 10 U ml⁻¹. The addition of glucose or malt extract and supplements containing organic N (e.g., peptone, yeast extract) either depressed or did not affect the enzyme production. Further experiments were then performed in a 3-l stirred tank reactor to assess the impact of medium pH and stirring speed on the yeast enzyme activity. The lipase activity was low (1.8 U ml⁻¹) when the pH was held constant at 6.5, significantly increased (18.7 U ml⁻¹) with uncontrolled pH and was maximum (20.4 U ml⁻¹) when the pH was let free to vary below 6.5. A stirring regime, that varied depending on the dissolved oxygen concentration in the medium, both prevented the occurrence of anoxic conditions during the exponential growth phase and enabled good lipase production (i.e., 21.6 U ml⁻¹) and mean volumetric productivity (i.e., 123.5 U l⁻¹ h⁻¹).     

Optimization of growth media for obtaining high-cell density cultures of halophilic archaea (family Halobacteriaceae) by response surface methodology

Optimization of media components for the growth and biomass production of Halobacterium salinarum VKMM 013 was carried out using response surface methodology. A second order quadratic model was estimated and media components were determined based on quadratic regression equation generated by model. These were 6.35 g L⁻¹ of KCl, 9.70 g L⁻¹ of MgSO₄, 13.38 g L⁻¹ of gelatin and 12.00 g L⁻¹ of soluble starch in nutrient broth supplemented with artificial seawater with 20% (w/v) of NaCl. In these optimal conditions, the obtained cell concentration of 0.746 g L⁻¹ dry weight was in agreement with the predicted cell concentration. The optimized media significantly shortened the time required for cell culture to reach the stationary phase while providing a nearly 2.4-fold increase in biomass production. Furthermore, in cell cultures of three other halophilic archaea the use of optimized media enhanced growth rate and provided high-cell density.     

Enhanced 2,3-butanediol production by Klebsiella oxytoca using a two-stage agitation speed control strategy

Batch fermentative production of 2,3-butanediol by Klebsiella oxytoca was investigated using various oxygen supply methods though varying agitation speed. Based on the analysis of three kinetic parameters including specific cell growth rate (μ), specific glucose consumption rate (q_s) and specific 2,3-butanediol formation rate (q_p), a two-stage agitation speed control strategy, aimed at achieving high concentration, high yield and high productivity of 2,3-butanediol, was proposed. At the first 15 h, agitation speed was controlled at 300 rpm to obtain high μ for cell growth, subsequently agitation speed was controlled at 200 rpm to maintain high q_p for high 2,3-butanediol accumulation. Finally, the maximum concentration of 2,3-butanediol reached 95.5 g l⁻¹ with the yield of 0.478 g g⁻¹ and the productivity of 1.71 g l⁻¹ h⁻¹, which were 6.23%, 6.22% and 22.14% over the best results controlled by constant agitation speeds.     

Ethanol production from syngas by Clostridium strain P11 using corn steep liquor as a nutrient replacement to yeast extract

The feasibility of replacing yeast extract (YE) by corn steep liquor (CSL), a low cost nutrient source, for syngas fermentation to produce ethanol using Clostridium strain P11 was investigated. About 32% more ethanol (1.7 g L⁻¹) was produced with 20 g L⁻¹ CSL media in 250-mL bottle fermentations compared to media with 1 g L⁻¹ YE after 360 h. Maximum ethanol concentrations after 360 h of fermentation in a 7.5-L fermentor with 10 and 20 g L⁻¹ CSL media were 8.6 and 9.6 g L⁻¹, respectively, which represent 57% and 60% of the theoretical ethanol yields from CO. Only about 6.1 g L⁻¹ of ethanol was obtained in the medium with 1 g L⁻¹ YE after 360 h, which represents 53% of the theoretical ethanol yield from CO. The use of CSL also enhanced butanol production by sevenfold compared to YE in bottle fermentations. These results demonstrate that CSL can replace YE as the primary medium component and significantly enhance ethanol production by Clostridium strain P11.     

Development of chemically defined media supporting high cell density growth of Ketogulonicigenium vulgare and Bacillus megaterium

The immediate precursor of L-ascorbic acid, or vitamin C, is 2-keto-l-gulonic acid (2-KLG). This is commonly produced commercially by Ketogulonicigenium vulgare and Bacillus megaterium, using corn steep liquor powder (CSLP) as an organic nitrogen source. In this study, the effects of the individual CSLP components (amino acids, vitamins, and metal elements) on 2-KLG production were evaluated, with the aim of developing a complete, chemically defined medium for 2-KLG production. Forty components of CSLP were analyzed, and key components were correlated to biomass, 2-KLG productivity, and consumption rate of L-sorbose. Glycine had the greatest effect, followed by serine, biotin, proline, nicotinic acid, and threonine. The combination of 0.28 g L⁻¹ serine, 0.36 g L⁻¹glycine, 0.18 g L⁻¹ threonine, 0.28 g L⁻¹proline, 0.19 g L⁻¹nicotinic acid, and 0.62 mg L⁻¹biotin in a chemically defined medium produced the highest maximum biomass concentration (4.2 × 10⁹ cfu mL⁻¹), 2-KLG concentration (58 g L⁻¹), and yield (0.76 g g⁻¹) after culturing for 28 h.     

Effect of lignocellulosic inhibitory compounds on growth and ethanol fermentation of newly-isolated thermotolerant Issatchenkia orientalis

A newly isolated thermotolerant ethanologenic yeast strain, Issatchenkia orientalis IPE 100, was able to produce ethanol with a theoretical yield of 85% per g of glucose at 42 °C. Ethanol production was inhibited by furfural, hydroxymethylfurfural and vanillin concentrations above 5.56 g L⁻¹, 7.81 g L⁻¹, and 3.17 g L⁻¹, respectively, but the strain was able to produce ethanol from enzymatically hydrolyzed steam-exploded cornstalk with 93.8% of theoretical yield and 0.91 g L⁻¹ h⁻¹ of productivity at 42 °C. Therefore, I. orientalis IPE 100 is a potential candidate for commercial lignocelluloses-to-ethanol production.     

Lactic acid production by Lactobacillus sp. RKY2 in a cell-recycle continuous fermentation using lignocellulosic hydrolyzates as inexpensive raw materials

Continuous lactic acid fermentations were conducted using lignocellulosic hydrolyzates and corn steep liquor as inexpensive raw materials. Lactic acid concentrations decreased with increases in the dilution rate, whereas the residual substrate concentrations increased. However, lactic acid yields were maintained at more than 0.90 g g⁻¹ over all cases experimented. The cell-recycle cultivation system exerted positive effects on fermentation efficiency, including volumetric productivity, which is attributable to the retention of cells in the bioreactor. The cell-recycle continuous fermentation of lignocellulosic hydrolyzates yielded a lactic acid productivity of 6.7 g l⁻¹ h⁻¹ for a dilution rate of 0.16 h⁻¹ using 30 g l⁻¹ of corn steep liquor and 1.5 g l⁻¹ of yeast extract as nutrients. The productivity (6.7 g l⁻¹ h⁻¹) acquired by the cell-recycle continuous fermentation of lignocellulosic hydrolyzates was 1.6 times higher than the lactic acid productivity yielded in the continuous fermentation without cell-recycle system.     

Techno-economic implications of improved high gravity corn mash fermentation

The performance of Saccharomyces cerevisiae MBG3964, a strain able to tolerate >18% v/v ethanol, was compared to leading industrial ethanol strain, Fermentis Ethanol Red, under high gravity corn mash fermentation conditions. Compared to the industrial ethanol strain, MBG3964 gave increased alcohol yield (140 g L⁻¹ vs. 126 g L⁻¹), lower residual sugar (4 g L⁻¹ vs. 32 g L⁻¹), and lower glycerol (11 g L⁻¹ vs. 12 g L⁻¹). After 72 h fermentation, MBG3964 showed about 40% viability, whereas the control yeast was only about 3% viable. Based on modelling, the higher ethanol tolerant yeast could increase the profitability of a corn-ethanol plant and help it remain viable through higher production, lower unit heating requirements and extra throughput. A typical 50 M gal y⁻¹ dry mill ethanol plant that sells dried distiller’s grain could potentially increase its profit by nearly $US3.4 M y⁻¹ due solely to the extra yield, and potentially another $US4.1 M y⁻¹ if extra throughput is possible.