Scarless gene deletion in methylotrophic Hansenula polymorpha by using mazF as counter-selectable marker

With increasing application of Hansenula polymorpha in fundamental research and biotechnology, many more genetic manipulations are required. However, these have been restricted for the finiteness of selectable markers. Here, MazF, a toxin protein from Escherichia coli, was investigated as a counter-selectable marker in H. polymorpha. The lethal effect of MazF on yeast cells suggested that it is a candidate for counter-selection in H. polymorpha. Markerless or scarless gene deletion in H. polymorpha was conducted based on selectable markers cassette mazF-zeoR, in which the zeocin resistance cassette and mazF expression cassette were used as positive and counter-selectable markers, respectively. For markerless deletion, the target region can be replaced by CYC1TT via two-step homologous recombination. For scarless deletion, the innate upstream region (5′UP) of target genes rather than CYC1TT mediates homologous recombination to excise both selectable markers and 5′ sequence of target genes. Moreover, scarless deletion can be accomplished by using short homologous arms for the effectiveness of mazF as a counter-selectable marker. The applicability of the strategies in markerless or scarless deletion of PEP4, LEU2, and TRP1 indicates that this study provides easy, time-efficient, and host-independent protocols for single or multiple genetic manipulations in H. polymorpha.     

Isolation and characterization of an antifungal protein from Bacillus licheniformis HS10

Bacillus licheniformis HS10 is a good biocontrol agent against Pseudoperonospora cubensis which caused cucumber downy disease. To identify and characterize the antifungal proteins produced by B.licheniformis HS10, the proteins from HS10 were isolated by using 30–60% ammonium sulfate precipitation, and purified with column chromatography on DEAE Sepharose Fast Flow, RESOURCE Q and Sephadex G-75. And the SDS–PAGE and MALDI-TOF/TOF-MS analysis results demonstrated that the antifungal protein was a monomer with molecular weight of about 55 kDa, identified as carboxypeptidase. Our experiments also showed that the antifungal protein from B. licheniformis HS10 had significantly inhibition on eight different kinds of plant pathogenic fungi, and it was stable with good biological activity at as high as 100 °C for 30 min and in pH value ranged from 6 to 10. The biological activity was negatively affected by protease K and 10 mM metal cations except Ca²⁺.     

A simple method of markerless gene deletion in Staphylococcus aureus

Staphylococcus aureus is a Gram-positive pathogen that causes opportunistic infections and a wide variety of diseases. Methicillin-resistant S. aureus (MRSA) is frequently isolated as multidrug-resistant in nosocomial and community infections. Molecular genetic manipulation is an important tool for understanding the molecular mechanism of S. aureus infection. However the number of available antibiotic markers is limited due to multidrug resistance. In this study, we constructed two Escherichia coli-S. aureus shuttle vectors, pKFT and pKFC, that carry a temperature-sensitive origin of replication in S. aureus, lacZ(a) enabling a simple blue-white screening in E. coli, an ampicillin resistant gene, and either a tetracycline resistance gene or a chloramphenicol resistance gene. We report a simple technique using pKFT to construct a markerless gene deletion mutant in S. aureus by allelic replacement without the use of a counter-selection marker. Subculture twice at 25 °C was critical to promote an allelic exchange rate in S. aureus. This technique is very simple and useful to facilitate genetic research on S. aureus.     

Simple Method for Markerless Gene Deletion in Multidrug-Resistant Acinetobacter baumannii

The traditional markerless gene deletion technique based on overlap extension PCR has been used for generating gene deletions in multidrug-resistant Acinetobacter baumannii. However, the method is time-consuming because it requires restriction digestion of the PCR products in DNA cloning and the construction of new vectors containing a suitable antibiotic resistance cassette for the selection of A. baumannii merodiploids. Moreover, the availability of restriction sites and the selection of recombinant bacteria harboring the desired chimeric plasmid are limited, making the construction of a chimeric plasmid more difficult. We describe a rapid and easy cloning method for markerless gene deletion in A. baumannii, which has no limitation in the availability of restriction sites and allows for easy selection of the clones carrying the desired chimeric plasmid. Notably, it is not necessary to construct new vectors in our method. This method utilizes direct cloning of blunt-end DNA fragments, in which upstream and downstream regions of the target gene are fused with an antibiotic resistance cassette via overlap extension PCR and are inserted into a blunt-end suicide vector developed for blunt-end cloning. Importantly, the antibiotic resistance cassette is placed outside the downstream region in order to enable easy selection of the recombinants carrying the desired plasmid, to eliminate the antibiotic resistance cassette via homologous recombination, and to avoid the necessity of constructing new vectors. This strategy was successfully applied to functional analysis of the genes associated with iron acquisition by A. baumannii ATCC 19606 and to ompA gene deletion in other A. baumannii strains. Consequently, the proposed method is invaluable for markerless gene deletion in multidrug-resistant A. baumannii.     

Extractive fermentation for enhanced production of alkaline phosphatase from Bacillus licheniformis MTCC 1483 using aqueous two-phase systems

A study was made to find out maximum partitioning of Bacillus licheniformis alkaline phosphatase in different ATPSs composed of different molecular weight of PEG X (X = 2000, 4000, 6000) with salts (magnesium sulphate, sodium sulphate, sodium citrate) and polymers (dextran 40, dextran T500). Physicochemical factors such as effect of system pH, system temperature and production media were evaluated for partitioning of alkaline phosphatase. PEG 4000 [9.0% (w/v)] and dextran T500 [9.6% (w/v)] were selected as most suitable system components for alkaline phosphatase production by B. licheniformis based on greater partition coefficient (k = 5.23). The two-phase system produced fewer enzymes than the homogeneous fermentation (control) in early stage of fermentation, but after 72 h the enzyme produced in the control system was less than that in the ATPS. Total alkaline phosphatase yield in ATPS fermentation was 3907.01 U/ml and in homogeneous fermentation 2856.50 U/ml.     

Efficient markerless gene replacement in Corynebacterium glutamicum using a new temperature-sensitive plasmid

Random chemical mutation of a Corynebacterium glutamicum-Escherichia coli shuttle vector derived from plasmid pCGR2 was done using hydroxylamine. It brought about amino acid substitutions G109D and E180K within the replicase superfamily domain of the plasmid's RepA protein and rendered the plasmid highly unstable, especially at higher incubation temperatures. Colony formation of C. glutamicum was consequently completely inhibited at 37 °C but not at 25 °C. G109 is a semi-conserved residue mutation which resulted in major temperature sensitivity. E180 on the other hand is not conserved even among RepA proteins of closely related C. glutamicum pCG1 family plasmids and its independent mutation caused relatively moderate plasmid instability. Nonetheless, simultaneous mutation of both residues was required to achieve temperature-sensitive colony formation. This new pCGR2-derived temperature-sensitive plasmid enabled highly efficient chromosomal integration in a variety of C. glutamicum wild-type strains, proving its usefulness in gene disruption studies. Based on this, an efficient markerless gene replacement system was demonstrated using a selection system incorporating the temperature-sensitive replicon and Bacillus subtilis sacB selection marker, a system hitherto not used in this bacterium. Single-crossover integrants were accurately selected by temperature-dependent manner and 93% of the colonies obtained by the subsequent sucrose selection were successful double-crossover recombinants.     

Correlation between grass carp (Ctenopharyngodon idella) resistance to grass carp reovirus and the genetic insert-deletion polymorphisms in promoter and intron of RIG-I gene

RIG-I (retinoic acid-inducible gene I) is an essential cytosolic pathogen recognition receptor that binds to a variety of viral RNA or DNA to induce type I interferons. In the present study, insert–deletion polymorphisms in promoter and introns of CiRIG-I (Ctenopharyngodon idella RIG-I) were explored, their associations with resistance/susceptibility to grass carp reovirus (GCRV) were analyzed. To this end, genomic sequence of CiRIG-I gene was obtained, and twenty pairs of primers were prepared for the detection of insert–deletion polymorphisms. Five insert–deletion mutations were found, a 2-bp mutation and an 8-bp mutation existed in the promoter and other three sizes in 74 bp, 146 bp and 53 bp were sited in the intron 8. After a challenge experiment, only the genotype and allele of − 740 insert–deletion mutation in the promoter and allele of 6804 insert–deletion mutation were significantly associated with resistance/susceptibility to GCRV among the five mutations (P < 0.05). To further identify this correlation, another independent challenge test was carried out. The result revealed that the cumulative mortality in ins/ins genotype individuals (43.75%) at − 740 insert–deletion mutation was significantly lower than that in ins/del (72.09%) and del/del (74.19%) genotypes (P < 0.05). Linkage disequilibrium and haplotype analysis showed 6610 insert–deletion mutation and 6804 insert–deletion mutation were linkage disequilibrium. The haplotype ins–ins (6610ins–6804ins) was significantly susceptible to GCRV, and ins–del (6610ins–6804del) was significantly resistant to GCRV (P < 0.05). Those could be potential gene markers for the future molecular selection of strains that are resistant to GCRV.     

Methylation-dependent DNA restriction in Bacillus anthracis

Bacillus anthracis, the causative agent of anthrax, is poorly transformed with DNA that is methylated on adenine or cytosine. Here we characterize three genetic loci encoding type IV methylation-dependent restriction enzymes that target DNA containing C5-methylcytosine (m5C). Strains in which these genes were inactivated, either singly or collectively, showed increased transformation by methylated DNA. Additionally, a triple mutant with an ~ 30-kb genomic deletion could be transformed by DNA obtained from Dam⁺Dcm⁺E. coli, although at a low frequency of ~ 10^− 3 transformants/10⁶ cfu. This strain of B. anthracis can potentially serve as a preferred host for shuttle vectors that express recombinant proteins, including proteins to be used in vaccines. The gene(s) responsible for the restriction of m6A-containing DNA in B. anthracis remain unidentified, and we suggest that poor transformation by such DNA could in part be a consequence of the inefficient replication of hemimethylated DNA in B. anthracis.     

Identification, expression, and characterization of a novel bacterial RGI lyase enzyme for the production of bio-functional fibers

A gene encoding a putative rhamnogalacturonan I (RGI) Lyase (EC 4.2.2.-) from Bacillus licheniformis (DSM13) was selected after a homology search and phylogenetic analysis and optimized with respect to codon usage. The designed gene was transformed into Pichia pastoris and the enzyme was produced in the eukaryotic host with a high titer in a 5 l bioreactor. The RGI Lyase was purified by Cu²⁺ affinity chromatography and 1.1 g pure enzyme was achieved pr. L. When the denatured protein was deglycosylated with EndoH, the molecular weight of the protein decreased to 65 kDa, which correlated with the predicted molecular weight of the mature RGI Lyase of 596 amino acids. By use of a statistical design approach, with potato rhamnogalacturonan as the substrate, the optimal reaction conditions for the RGI Lyase were established to be: 61 °C, pH 8.1, and 2 mM of both Ca²⁺ and Mn²⁺ (specific activity 18.4 U/mg; K_M 1.2 mg/ml). The addition of both Ca²⁺ and Mn²⁺ was essential for enzyme activity. The enzyme retained its catalytic activity at higher temperatures and the enzyme has a half life at 61 °C of 15 min. The work thus demonstrated the workability of in silico based screening coupled with a synthetic biology approach for gene synthesis for identification and production of a thermostable enzyme.     

Influence of inoculum density and aeration volume on biomass and bioactive compound production in bulb-type bubble bioreactor cultures of Eleutherococcus koreanum Nakai

This study deals with the effects of initial inoculum density and aeration volume on biomass and bioactive compound production in adventitious roots of Eleutherococcus koreanum Nakai in bulb-type bubble bioreactors (3-L capacity). While the fresh and dry weights of the roots increased with increasing inoculum density, the highest percentage dry weight and accumulation of total target compounds (eleutheroside B and E, chlorogenic acid, total phenolics, and flavonoids) were noted at an inoculum density of 5.0 g L⁻¹. Poor aeration volume (0.05 vvm) stunted root growth, and high aeration volume (0.4 vvm) caused physiological disorders. Moreover, an inoculum density of 5.0 g L⁻¹ and an aeration volume of 0.1 vvm resulted in the highest concentration of total target compounds and least root death. Such optimization of culture conditions will be beneficial for the large-scale production of E. koreanum biomass and bioactive compounds.     

Expression of the hGM-CSF in the silk glands of germline of gene-targeted silkworm

To express human granulocyte-macrophage colony-stimulating factor (hGM-CSF) gene in the silk glands of transformation silkworm (Bombyx mori) based on gene-targeting, two fragments from fibroin heavy chain gene (fib-H) of silkworm were cloned and sequenced. One fragment contains the 1st exon and its downstream 1st intron’s partial sequence; and the other fragment contains the 1st intron’s partial sequence and the 2nd exon’s partial sequence. Then the two fragments, as homologous arm, were inserted into pSK to generate a gene-targeted vector, pSK-HL-A3GFP-FLP-GM-CSF-FLPA-HR in which a gfp gene driven by A3 promoter and an hGM-CSF gene under the control of fibroin light chain (fib-L) promoter were included. The vector was transferred into the silkworm eggs using sperm-mediated gene transfer. After being screened for green fluorescent, the transformation silkworm was obtained, whose genome was verified by PCR and dot hybridization to confirm whether the target genes had been integrated into the silkworm genome. Furthermore, in the posterior silk glands of the G4 generation transformation silkworms, a specific band with the molecular weight of 22 kDa could be detected by Western blotting with an antibody against hGM-CSF, and the expression level of the hGM-CSF estimated by ELISA was approximately 1.26 ng per gram fresh posterior silk gland.     

Nuclear and chloroplast DNA sequences data support the origin of Potamogeton intortusifolius J.B. He in China as a hybrid between P. perfoliatus Linn. and P. wrightii Morong

Internal transcribed spacers (ITS) of nuclear ribosomal DNA and chloroplast rbcL gene sequence data were used to test the hypothesis that natural populations of Potamogeton intortusifolius J.B. He in China originated from hybridization between P. perfoliatus Linn. and P. wrightii Morong. Based on ITS sequences data, P. intortusifolius possessed heterozygous rDNA genotypes which confirmed the hybrid origin of P. intortusifolius. Chloroplast rbcL gene sequences of P. intortusifolius from Yichang population revealed the same chloroplast haplotype as P. perfoliatus and the samples of P. intortusifolius from Weinan population had the same chloroplast haplotype as P. wrightii, which indicated that both putative parental species had been the maternal parent and that the two populations of P. intortusifolius had independent origins. This study confirms P. intortusifolius as a reciprocal hybrid. Because P. × intortusifolius in China has the same hybrid origin as P. × anguillanus Koidz. in Japan, it is suggested that P. × intortusifolius should be a synonym of P. × anguillanus.     

Chitobiose production by using a novel thermostable chitinase from Bacillus licheniformis strain JS isolated from a mushroom bed

The thermophilic Bacillus licheniformis strain JS was isolated from a bed of mushrooms, Pleurotus sajor-caju. The organism could produce a novel, single-component, thermostable chitinase that was purified by ion-exchange chromatography using DEAE-cellulose in 7.64% yield and in an 8.1-fold enhancement in purity. Its molecular weight is 22 kDa. The enzyme is a chitobiosidase, since the chitin hydrolysate is N^I,N^II-diacetylchitobiose. The optimum temperature for enzyme activity is 55 °C, and the optimum pH is 8.0. It was completely inhibited by Hg²⁺ ions whereas Co²⁺ ions served as an activator. The thermostability of this enzyme is important in the bioconversion of chitinous waste and for the production of chitooligosaccharides.     

Targeted gene deletion in Aspergillus fumigatus using microbial machinery and a recyclable marker

The emerging invasive fungal pathogen Aspergillus fumigatus causes very serious infections among immunocompromised patient populations. While the genome of this pathogen has been sequenced, a major barrier to better understanding the complex biology of this eukaryotic organism is a lack of tools for efficient genetic manipulation. To improve upon this, we have generated a new gene deletion system for A. fumigatus using yeast recombinational cloning and Agrobacterium tumefaciens mediated transformation (ATMT) employing a recyclable marker system. This system reduced the time for generating a gene deletion strain in our hands by two-thirds (12 weeks to 3 weeks) using minimal human labor, and we demonstrate that it can be used to efficiently generate multiple gene deletions within a single strain.     

The ‘true’ l-xylulose reductase of filamentous fungi identified in Aspergillus niger

l-Xylulose reductase is part of the eukaryotic pathway for l-arabinose catabolism. A previously identified l-xylulose reductase in Hypocrea jecorina turned out to be not the ‘true’ one since it was not upregulated during growth on l-arabinose and the deletion strain showed no reduced l-xylulose reductase activity but instead lost the d-mannitol dehydrogenase activity [17]. In this communication we identified the ‘true’ l-xylulose reductase in Aspergillus niger. The gene, lxrA (JGI177736), is upregulated on l-arabinose and the deletion results in a strain lacking the NADPH-specific l-xylulose reductase activity and having reduced growth on l-arabinose. The purified enzyme had a K_m for l-xylulose of 25 mM and a ν_max of 650 U/mg.     

Development of species-specific PCR and PCR-restriction fragment length polymorphism assays for L.infantum/L.donovani discrimination

Discrimination of Leishmaniainfantum and L. donovani, the members of the L. (L.) donovani complex, is important for diagnosis and epidemiological studies of visceral leishmaniasis (VL). We have developed two molecular tools including a restriction fragment length polymorphisms of amplified DNA (PCR-RFLP) and a PCR that are capable to discriminate L. donovani from L. infantum. Typing of the complex was performed by a simple PCR of cysteineproteaseB (cpb) gene followed by digestion with DraIII. The enzyme cuts the 741-bp amplicon of L. donovani into 400 and 341 bp fragments whereas the 702 bp of L. infantum remains intact. The designed PCR species-specific primer pair is specific for L. donovani and is capable of amplifying a 317 bp of 3’ end of cpb gene of L. donovani whereas it does not generate an amplicon for L. infantum. The species-specific primers and the restriction enzyme were designed based on a 39 bp insertion/deletion (indel) in the middle of the cpb gene. Both assays could differentiate correctly the two species and are reliable and high-throughput alternatives for molecular diagnosis and epidemiological studies of VL in various foci.     

Biochemical characterization of a low molecular weight aspartic protease inhibitor from thermo-tolerant Bacillus licheniformis: Kinetic interactions with Pepsin

The present article reports a low molecular weight aspartic protease inhibitor, API, from a newly isolated thermo-tolerant Bacillus licheniformis. The inhibitor was purified to homogeneity as shown by rp-HPLC and SDS-PAGE. API is found to be stable over a broad pH range of 2–11 and at temperature 90 °C for 2 1/2 h. It has a Mr (relative molecular mass) of 1363 Da as shown by MALDI-TOF spectra and 1358 Da as analyzed by SDS-PAGE .The amino acid analysis of the peptide shows the presence of 12 amino acid residues having Mr of 1425 Da. The secondary structure of API as analyzed by the CD spectra showed 7% α-helix, 49% β-sheet and 44% aperiodic structure. The Kinetic studies of Pepsin–API interactions reveal that API is a slow-tight binding competitive inhibitor with the IC₅₀ and K_i values 4.0 nM and (3.83 nM–5.31 nM) respectively. The overall inhibition constant K_i? value is 0.107 ± 0.015 nM. The progress curves are time-dependent and consistent with slow-tight binding inhibition: E + I ? (k₄, k₅) EI ? (k₆, k₇) EI?. Rate constant k₆ = 2.73 ± 0.32 s^− 1 reveals a fast isomerization of enzyme–inhibitor complex and very slow dissociation as proved by k₇ = 0.068 ± 0.009 s^− 1. The Rate constants from the intrinsic tryptophanyl fluorescence data is in agreement with those obtained from the kinetic analysis; therefore, the induced conformational changes were correlated to the isomerization of EI to EI?.     

Identification of an estrogen receptor gene in the natural freshwater snail Bithynia tentaculata

Mollusks have received increasing interest in ecotoxicological studies but so far the available scientific analyses of how their genes are affected by anthropogenic pollutants are scarce. The focus of this study is to identify an estrogen receptor (er) gene in the common prosobranch snail Bithynia tentaculata and to test a hypothesis that 17α-Ethinylestradiol (EE2) will modulate er gene expression after short-term exposure. We set up exposure experiments with a total of 144 snails, which were collected from a natural population in southern Sweden. Snails were exposed to either 10 ng/L or 100 ng/L EE2 during 24 h and/or 72 h. From the isolated B. tentaculata RNA we successfully identified and characterized a novel er gene and phylogenetic analyses strongly indicate that the Bithynia er gene is an ortholog to the human ERα (ESR1, NR3A1). We found a significant interaction between EE2-dose and exposure duration on the er's gene expression (Two-way ANOVA; p = 0.04). We also found a significant difference in the gene expression of the er when comparing the control and 100 ng/L treatment groups after 72 h in female snails (One-way ANOVA; p = 0.047). The results from this study should be useful for future field-related studies of estrogen receptors in natural populations of mollusks.