Inheritance of long staple fiber quality traits of Gossypium barbadense in G. hirsutum background using CSILs

Gossypium hirsutum is a high yield cotton species that exhibits only moderate performance in fiber qualities. A promising but challenging approach to improving its phenotypes is interspecific introgression, the transfer of valuable traits or genes from the germplasm of another species such as G. barbadense, an important cultivated extra long staple cotton species. One set of chromosome segment introgression lines (CSILs) was developed, where TM-1, the genetic standard in G. hirsutum, was used as the recipient parent and the long staple cotton G. barbadense Hai7124 was used as the donor parent by molecular marker-assisted selection (MAS) in BC₅S_1–4 and BC₄S_1–3 generations. After four rounds of MAS, the CSIL population was comprised of 174 lines containing 298 introgressed segments, of which 86 (49.4%) lines had single introgressed segments. The total introgressed segment length covered 2,948.7 cM with an average length of 16.7 cM and represented 83.3% of tetraploid cotton genome. The CSILs were highly varied in major fiber qualities. By integrated analysis of data collected in four environments, a total of 43 additive quantitative trait loci (QTL) and six epistatic QTL associated with fiber qualities were detected by QTL IciMapping 3.0 and multi-QTL joint analysis. Six stable QTL were detected in various environments. The CSILs developed and the analyses presented here will enhance the understanding of the genetics of fiber qualities in long staple G. barbadense and facilitate further molecular breeding to improve fiber quality in Upland cotton.     

Genetic dissection of lint yield and fiber quality traits of <Emphasis Type="Italic">G. hirsutum</Emphasis> in <Emphasis Type="Italic">G. barbadense</Emphasis> background

Gossypium hirsutum L. is a widely cultivated species characterized by its high yield and wide environmental adaptability, while Gossypium barbadense is well known for its superior fiber quality. In the present report, we, for the first time, developed G. hirsutum chromosome segment introgression lines (ILs) in a G. barbadense background (GhILs_Gb) and genetically dissected the inheritance of lint yield and fiber quality of G. hirsutum in G. barbadense background. The GhILs_Gb contains introgressed segments spanning 4121.20 cM, which represents 82.20% of the tetraploid cotton genome, with an average length of 18.65 cM. A total of 39 quantitative trait loci (QTLs) for six traits are identified in this IL population planted in Xinjiang. Four QTL clusters are detected. Of them, however, three clusters have deleterious effects on fiber length and strength and boll weight, and only one cluster on Chr. D9 can be used in marker-assisted selection (MAS) to increase lint percentage and decrease micronaire value in G. barbadense. QTL mapping showed that most of yield-related QTLs detected have positive effects and increase lint yield in G. barbadense, while most of fiber quality-related QTLs have deleterious effects except for micronaire. It suggested that G. hirsutum evolved to have a high lint yield. Several lines improved in lint percentage and boll size in G. barbadense by introgressed one fragment of G. hirsutum have been developed from the GhILs_Gb. The ILs developed, and the analyses presented here will enhance the understanding of the genetics of lint yield and fiber quality in G. hirsutum and facilitate further molecular breeding to improve lint yield in G. barbadense.     

Mapping quantitative trait loci for lint yield and fiber quality across environments in a Gossypium hirsutum × Gossypium barbadense backcross inbred line population

Identification of stable quantitative trait loci (QTLs) across different environments and mapping populations is a prerequisite for marker-assisted selection (MAS) for cotton yield and fiber quality. To construct a genetic linkage map and to identify QTLs for fiber quality and yield traits, a backcross inbred line (BIL) population of 146 lines was developed from a cross between Upland cotton (Gossypium hirsutum) and Egyptian cotton (Gossypium barbadense) through two generations of backcrossing using Upland cotton as the recurrent parent followed by four generations of self pollination. The BIL population together with its two parents was tested in five environments representing three major cotton production regions in China. The genetic map spanned a total genetic distance of 2,895 cM and contained 392 polymorphic SSR loci with an average genetic distance of 7.4 cM per marker. A total of 67 QTLs including 28 for fiber quality and 39 for yield and its components were detected on 23 chromosomes, each of which explained 6.65–25.27 % of the phenotypic variation. Twenty-nine QTLs were located on the At subgenome originated from a cultivated diploid cotton, while 38 were on the Dt subgenome from an ancestor that does not produce spinnable fibers. Of the eight common QTLs (12 %) detected in more than two environments, two were for fiber quality traits including one for fiber strength and one for uniformity, and six for yield and its components including three for lint yield, one for seedcotton yield, one for lint percentage and one for boll weight. QTL clusters for the same traits or different traits were also identified. This research represents one of the first reports using a permanent advanced backcross inbred population of an interspecific hybrid population to identify QTLs for fiber quality and yield traits in cotton across diverse environments. It provides useful information for transferring desirable genes from G. barbadense to G. hirsutum using MAS.     

Molecular dissection of interspecific variation between Gossypium hirsutum and Gossypium barbadense (cotton) by a backcross-self approach: I. Fiber elongation

The current study is the first installment of an effort to explore the secondary gene pool for the enhancement of Upland cotton (Gossypium hirsutum L.) germplasm. We developed advanced-generation backcross populations by first crossing G. hirsutum cv. Tamcot 2111 and G. barbadense cv. Pima S6, then independently backcrossing F₁ plants to the G. hirsutum parent for three cycles. Genome-wide mapping revealed introgressed alleles at an average of 7.3% of loci in each BC₃F₁ plant, collectively representing G. barbadense introgression over about 70% of the genome. Twenty-four BC₃F₁ plants were selfed to generate 24 BC₃F₂ families of 22–172 plants per family (totaling 2,976 plants), which were field-tested for fiber elongation and genetically mapped. One-way analysis of variance detected 22 non-overlapping quantitative trail loci (QTLs) distributed over 15 different chromosomes. The percentage of variance explained by individual loci ranged from 8% to 28%. Although the G. barbadense parent has lower fiber elongation than the G. hirsutum parent, the G. barbadense allele contributed to increased fiber elongation at 64% of the QTLs. Two-way analysis of variance detected significant (P<0.001) among-family genotype effects and genotype×family interactions in two and eight regions, respectively, suggesting that the phenotypic effects of some introgressed chromosomal segments are dependent upon the presence/absence of other chromosomal segments.Electronic Supplementary Material Supplementary material is available for this article at     

Genetic diversity and population structure in the US Upland cotton (Gossypium hirsutum L.)

Key message

Genetic diversity and population structure in the US Upland cotton was established and core sets of allelic richness were identified for developing association mapping populations in cotton.

Abstract

Elite plant breeding programs could likely benefit from the unexploited standing genetic variation of obsolete cultivars without the yield drag typically associated with wild accessions. A set of 381 accessions comprising 378 Upland (Gossypium hirsutum L.) and 3 G. barbadense L. accessions of the United States cotton belt were genotyped using 120 genome-wide SSR markers to establish the genetic diversity and population structure in tetraploid cotton. These accessions represent more than 100 years of Upland cotton breeding in the United States. Genetic diversity analysis identified a total of 546 alleles across 141 marker loci. Twenty-two percent of the alleles in Upland accessions were unique, specific to a single accession. Population structure analysis revealed extensive admixture and identified five subgroups corresponding to Southeastern, Midsouth, Southwest, and Western zones of cotton growing areas in the United States, with the three accessions of G. barbadense forming a separate cluster. Phylogenetic analysis supported the subgroups identified by STRUCTURE. Average genetic distance between G. hirsutum accessions was 0.195 indicating low levels of genetic diversity in Upland cotton germplasm pool. The results from both population structure and phylogenetic analysis were in agreement with pedigree information, although there were a few exceptions. Further, core sets of different sizes representing different levels of allelic richness in Upland cotton were identified. Establishment of genetic diversity, population structure, and identification of core sets from this study could be useful for genetic and genomic analysis and systematic utilization of the standing genetic variation in Upland cotton.     

Quantitative trait loci analysis of fiber quality traits using a random-mated recombinant inbred population in Upland cotton (Gossypium hirsutum L.)

Background

Upland cotton (Gossypium hirsutum L.) accounts for about 95% of world cotton production. Improving Upland cotton cultivars has been the focus of world-wide cotton breeding programs. Negative correlation between yield and fiber quality is an obstacle for cotton improvement. Random-mating provides a potential methodology to break this correlation. The suite of fiber quality traits that affect the yarn quality includes the length, strength, maturity, fineness, elongation, uniformity and color. Identification of stable fiber quantitative trait loci (QTL) in Upland cotton is essential in order to improve cotton cultivars with superior quality using marker-assisted selection (MAS) strategy.

Results

Using 11 diverse Upland cotton cultivars as parents, a random-mated recombinant inbred (RI) population consisting of 550 RI lines was developed after 6 cycles of random-mating and 6 generations of self-pollination. The 550 RILs were planted in triplicates for two years in Mississippi State, MS, USA to obtain fiber quality data. After screening 15538 simple sequence repeat (SSR) markers, 2132 were polymorphic among the 11 parents. One thousand five hundred eighty-two markers covering 83% of cotton genome were used to genotype 275 RILs (Set 1). The marker-trait associations were analyzed using the software program TASSEL. At p < 0.01, 131 fiber QTLs and 37 QTL clusters were identified. These QTLs were responsible for the combined phenotypic variance ranging from 62.3% for short fiber content to 82.8% for elongation. The other 275 RILs (Set 2) were analyzed using a subset of 270 SSR markers, and the QTLs were confirmed. Two major QTL clusters were observed on chromosomes 7 and 16. Comparison of these 131 QTLs with the previously published QTLs indicated that 77 were identified before, and 54 appeared novel.

Conclusions

The 11 parents used in this study represent a diverse genetic pool of the US cultivated cotton, and 10 of them were elite commercial cultivars. The fiber QTLs, especially QTL clusters reported herein can be readily implemented in a cotton breeding program to improve fiber quality via MAS strategy. The consensus QTL regions warrant further investigation to better understand the genetics and molecular mechanisms underlying fiber development.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-397) contains supplementary material, which is available to authorized users.     

Quantitative trait locus analysis of Verticillium wilt resistance in an introgressed recombinant inbred population of Upland cotton

Verticillium wilt (VW) of Upland cotton (Gossypium hirsutum L.) is caused by the soil-borne fungal pathogen Verticillium dahlia Kleb. The availability of VW-resistant cultivars is vital for control of this economically important disease, but there is a paucity of Upland cotton breeding lines and cultivars with a high level of resistance to VW. In general, G. barbadense L. (source of Pima cotton) is more VW-resistant than Upland cotton. However, the transfer of VW resistance from G. barbadense to Upland cotton is challenging because of hybrid breakdown in the F2 and successive generations of interspecific populations. We conducted two replicated greenhouse studies (tests 1 and 2) to assess the heritability of VW resistance to a defoliating V. dahliae isolate and identify genetic markers associated with VW resistance in an Upland cotton recombinant inbred mapping population that has stable introgression from Pima cotton. Disease ratings at the seedling stage on several different days after the first inoculation (DAI) in test 1, as well as the percentages of infected and defoliated leaves at 2 DAI in test 2, were found to be low to moderately heritable, indicating the importance of a replicated progeny test in selection for VW resistance. With a newly constructed linkage map consisting of 882 simple sequence repeat, single nucleotide polymorphism, and resistance gene analog–amplified fragment length polymorphism marker loci, we identified a total of 21 quantitative trait loci (QTLs) on 11 chromosomes and two linkage groups associated with VW resistance at several different DAIs in greenhouse tests 1 and 2. The markers associated with the VW resistance QTLs will facilitate fine mapping and cloning of VW resistance genes and genomics-assisted breeding for VW-resistant cultivars.     

Field evaluation of cotton near-isogenic lines introgressed with QTLs for productivity and drought related traits

Quantitative trait loci (QTLs) for yield and drought related physiological traits, osmotic potential (OP), carbon isotope ratio (δ¹³C, an indicator of water use efficiency), and leaf chlorophyll content (Chl), were exchanged via marker-assisted selection (MAS) between elite cultivars of the two cotton species Gossypium barbadense cv. F-177 and G. hirsutum cv. Siv’on. The resulting near isogenic lines (NILs) were examined in two field trials, each with two irrigation regimes, in order to (1) evaluate the potential to improve cotton drought resistance by MAS and (2) test the role of physiological traits in plant productivity. NILs introgressed with QTLs for high yield rarely exhibited an advantage in yield relative to the recipient parent, whereas a considerable number of NILs exhibited the expected phenotype in terms of lower OP (5 out of 9), higher δ¹³C (4 out of 6) or high Chl (2 out of 3). Several NILs exhibited considerable modifications in non-targeted traits including leaf morphology, stomatal conductance and specific leaf weight (SLW). In G. barbadense genotypes, yield was correlated negatively with δ¹³C and OP and positively with stomatal conductance, SLW and Chl, whereas in G. hirsutum yield was negatively correlated with δ¹³C, SLW and Chl. This dissimilarity suggests that each of the respective species has evolved different mechanisms underlying plant productivity. We conclude that the improvement of drought related traits in cotton NILs may lead to improved drought resistance via MAS, but that conventional breeding may be necessary to combine the introduced QTL(s) with high yield potential.     

The distribution of Gossypium hirsutum chromatin in G. barbadense germ plasm: molecular analysis of introgressive plant breeding

Cotton is unusual among major crop plants in that two cross-fertile species are widely cultivated for a common economic product, fiber. Both historical evidence and classical genetic studies suggest that many improved forms of Gossypium barbadense (Sea Island, Egyptian, and Pima cottons) may include chromatin derived from G. hirsutum. Using 106 restriction fragment length polymorphism (RFLP) loci well distributed across the cotton genome, we revealed the amount and genomic distribution of G. hirsutum chromatin in 54 G. barbadense collections from around the world. The average G. barbadense collection was comprised of 8.9% alleles apparently derived from G. hirsutum. Pima cultivars (7.3 %) had fewer G. hirsutum alleles than Sea Island (9.0%) or Egyptian (9.6%) cultivars. G. hirsutum alleles were not randomly distributed, as 57.5% of the total introgression observed was accounted for by five specific chromosomal regions that span less than 10% of the genome. The average length of an introgressed chromosome segment was 12.9 cM. Overlap of introgressed chromatin in different breeding programs hints that retention of these G. hirsutum chromosomal segments may impart a selective advantage to G. barbadense genotypes. Although cluster analysis generally grouped germ plasm from common classes and/or breeding programs together, no 2 genotypes were identical — thus differences in the length and repertoire of introgressed chromosome segments also permit DNA fingerprinting of G. barbadense cultivars.     

Sampling nucleotide diversity in cotton

Background  

Cultivated cotton is an annual fiber crop derived mainly from two perennial species, Gossypium hirsutum L. or upland cotton, and G. barbadense L., extra long-staple fiber Pima or Egyptian cotton. These two cultivated species are among five allotetraploid species presumably derived monophyletically between G. arboreum and G. raimondii. Genomic-based approaches have been hindered by the limited variation within species. Yet, population-based methods are being used for genome-wide introgression of novel alleles from G. mustelinum and G. tomentosum into G. hirsutum using combinations of backcrossing, selfing, and inter-mating. Recombinant inbred line populations between genetics standards TM-1, (G. hirsutum) × 3-79 (G. barbadense) have been developed to allow high-density genetic mapping of traits.     

Complementary genetic and genomic approaches help characterize the linkage group I seed protein QTL in soybean

Background

Cotton fibers (produced by Gossypium species) are the premier natural fibers for textile production. The two tetraploid species, G. barbadense (Gb) and G. hirsutum (Gh), differ significantly in their fiber properties, the former having much longer, finer and stronger fibers that are highly prized. A better understanding of the genetics and underlying biological causes of these differences will aid further improvement of cotton quality through breeding and biotechnology. We evaluated an inter-specific Gh × Gb recombinant inbred line (RIL) population for fiber characteristics in 11 independent experiments under field and glasshouse conditions. Sites were located on 4 continents and 5 countries and some locations were analyzed over multiple years.

Results

The RIL population displayed a large variability for all major fiber traits. QTL analyses were performed on a per-site basis by composite interval mapping. Among the 651 putative QTLs (LOD > 2), 167 had a LOD exceeding permutation based thresholds. Coincidence in QTL location across data sets was assessed for the fiber trait categories strength, elongation, length, length uniformity, fineness/maturity, and color. A meta-analysis of more than a thousand putative QTLs was conducted with MetaQTL software to integrate QTL data from the RIL and 3 backcross populations (from the same parents) and to compare them with the literature. Although the global level of congruence across experiments and populations was generally moderate, the QTL clustering was possible for 30 trait x chromosome combinations (5 traits in 19 different chromosomes) where an effective co-localization of unidirectional (similar sign of additivity) QTLs from at least 5 different data sets was observed. Most consistent meta-clusters were identified for fiber color on chromosomes c6, c8 and c25, fineness on c15, and fiber length on c3.

Conclusions

Meta-analysis provided a reliable means of integrating phenotypic and genetic mapping data across multiple populations and environments for complex fiber traits. The consistent chromosomal regions contributing to fiber quality traits constitute good candidates for the further dissection of the genetic and genomic factors underlying important fiber characteristics, and for marker-assisted selection.     

Construction of a complete set of alien chromosome addition lines from Gossypium australe in Gossypium hirsutum: morphological,cytological, and genotypic characterization

Key message

We report the first complete set of alien addition lines of G. hirsutum . The characterized lines can be used to introduce valuable traits from G. australe into cultivated cotton.

Abstract

Gossypium australe is a diploid wild cotton species (2n = 26, GG) native to Australia that possesses valuable characteristics unavailable in the cultivated cotton gene pool, such as delayed pigment gland morphogenesis in the seed and resistances to pests and diseases. However, it is very difficult to directly transfer favorable traits into cultivated cotton through conventional gene recombination due to the absence of pairing and crossover between chromosomes of G. australe and Gossypium hirsutum (2n = 52, AADD). To enhance the transfer of favorable genes from wild species into cultivated cotton, we developed a set of hirsutum–australe monosomic alien chromosome addition lines (MAAL) using a combination of morphological survey, microsatellite marker-assisted selection, and molecular cytogenetic analysis. The amphidiploid (2n = 78, AADDGG) of G. australe and G. hirsutum was consecutively backcrossed with upland cotton to develop alien addition lines of individual G. australe chromosomes in G. hirsutum. From these backcross progeny, we generated the first complete set of chromosome addition lines in cotton; 11 of 13 lines are monosomic additions, and chromosomes 7G^a and 13G^a are multiple additions. MAALs of 1G^a and 11G^a were the first to be isolated. The chromosome addition lines can be employed as bridges for the transfer of desired genes from G. australe into G. hirsutum, as well as for gene assignment, isolation of chromosome-specific probes, flow sorting and microdissection of chromosome, development of chromosome-specific ‘‘paints’’ for fluorochrome-labeled DNA fragments, physical mapping, and selective isolation and mapping of cDNAs for a particular G. australe chromosome.     

Genetic mapping and QTL analysis of fiber-related traits in cotton (<Emphasis Type="Italic">Gossypium</Emphasis>)

Cotton, the leading natural fiber crop, is largely produced by two primary cultivated allotetraploid species known as Upland or American cotton (Gossypium hirsutum L.) and Pima or Egyptian cotton (G. barbadense L.). The allotetraploid species diverged from each other and from their diploid progenitors (A or D genome) through selection and domestication after polyploidization. To analyze cotton AD genomes and dissect agronomic traits, we have developed a genetic map in an F₂ population derived from interspecific hybrids between G. hirsutum L. cv. Acala-44 and G. barbadense L. cv. Pima S-7. A total of 392 genetic loci, including 333 amplified fragment length polymorphisms (AFLPs), 47 simple sequence repeats (SSRs), and 12 restriction fragment length polymorphisms (RFLPs), were mapped in 42 linkage groups, which span 3,287 cM and cover approximately 70% of the genome. Using chromosomal aneuploid interspecific hybrids and a set of 29 RFLP and SSR framework markers, we assigned 19 linkage groups involving 223 loci to 12 chromosomes. Comparing four pairs of homoeologous chromosomes, we found that with one exception linkage distances in the A-subgenome chromosomes were larger than those in their D-subgenome homoeologues, reflecting higher recombination frequencies and/or larger chromosomes in the A subgenome. Segregation distortion was observed in 30 out of 392 loci mapped in cotton. Moreover, approximately 29% of the RFLPs behaved as dominant loci, which may result from rapid genomic changes. The cotton genetic map was used for quantitative trait loci (QTL) analysis using composite interval mapping and permutation tests. We detected seven QTLs for six fiber-related traits; five of these were distributed among A-subgenome chromosomes, the genome donor of fiber traits. The detection of QTLs in both the A subgenome in this study and the D subgenome in a previous study suggests that fiber-related traits are controlled by the genes in homoeologous genomes, which are subjected to selection and domestication. Some chromosomes contain clusters of QTLs and presumably contribute to the large amount of phenotypic variation that is present for fiber-related traits.Communicated by J. Dvorak     

Delineation of interspecific epistasis on fiber quality traits in Gossypium hirsutum by ADAA analysis of intermated G. barbadense chromosome substitution lines

Genetic diversity is the foundation of any crop improvement program, but the most cultivated Upland cotton [Gossypium hirsutum L., 2n?=?52, genomic formula?2(AD)₁] has a very narrow gene pool resulting from its evolutionary origin and domestication history. Cultivars of this cotton species (G. hirsutum L.) are prized for their combination of exceptional yield, other agronomic traits, and good fiber properties, whereas the other cultivated 52-chromosome species, G. barbadense L. [2n?=?52, genomic formula?2(AD)₂], is widely regarded as having the opposite attributes. It has exceptionally good fiber qualities, but generally lower yield and less desirable agronomic traits. Breeders have long aspired to combine the best attributes of G. hirsutum and G. barbadense, but have had limited success. F₁ hybrids are readily created and largely fertile, so the limited success may be due to cryptic biological and technical challenges associated with the conventional methods of interspecific introgression. We have developed a complementary alternative approach for introgression based on chromosome substitution line, followed by increasingly sophisticated genetic analyses of chromosome-derived families to describe the inheritance and breeding values of the chromosome substitution lines. Here, we analyze fiber quality traits of progeny families from a partial diallel crossing scheme among selected chromosome substitution lines (CS-B lines). The results provide a more detailed and precise QTL dissection of fiber traits, and an opportunity to examine allelic interaction effects between two substituted chromosomes versus one substituted chromosome. This approach creates new germplasm based on pair wise combinations of quasi-isogenic chromosome substitutions. The relative genetic simplicity of two-chromosome interactions departs significantly from complex or RIL-based populations, in which huge numbers of loci are segregating in all 26 chromosome pairs. Data were analyzed according to the ADAA genetic model, which revealed significant additive, dominance, and additive-by-additive epistasis effects on all of the fiber quality traits associated with the substituted chromosome or chromosome arm of CS-B lines. Fiber of line 3-79, the donor parent for the substituted chromosomes, had the highest Upper Half Mean length (UHM), uniformity ratio, strength, elongation, and lowest micronaire among all parents and hybrids. CS-B16 and CS-B25 had significant additive effects for all fiber traits. Assuming a uniform genetic background of the CS-B lines, the comparative analysis of the double-heterozygous hybrid combinations (CS-B?×?CS-B) versus their respective single heterozygous combinations (CS-B?×?TM-1) demonstrated that interspecific epistatic effects between the genes in the chromosomes played a major role in most of the fiber quality traits. Results showed that fiber of several hybrids including CS-B16?×?CS-B22Lo, CS-B16?×?CS-B25 and CS-B16?×?TM-1 had significantly greater dominance effects for elongation and hybrid CS-B16?×?CS-B17 had higher fiber strength than their parental lines. Multiple antagonistic genetic effects were also present for fiber quality traits associated with most of the substituted chromosomes and chromosome arms. Results from this study highlight the vital importance of epistasis in fiber quality traits and detected novel effects of some cryptic beneficial alleles affecting fiber quality on the 3-79 chromosomes, whose effects were not detected in the 3-79 parental lines.     

Postinfection Development of Rotylenchulus reniformis on Resistant Gossypium barbadense Accessions

The reniform nematode (Rotylenchulus reniformis) causes significant cotton (Gossypium hirsutum) losses in the southeastern United States. The research objective was to describe the effects of two resistant G. barbadense lines (cultivar TX 110 and accession GB 713) on development and fecundity of reniform nematode. Nematode development and fecundity were evaluated on the resistant lines and susceptible G. hirsutum cultivar Deltapine 16 in three repeated growth chamber experiments. Nematode development on roots early and late in the infection cycle was measured at set intervals from 1 to 25 d after inoculation (DAI) and genotypes were compared based on the number of nematodes in four developmental stages (vermiform, swelling, reniform, and gravid). At 15, 20, and 25 DAI, egg production by individual females parasitizing each genotype was measured. Unique reniform nematode developmental patterns were noted on each of the cotton genotypes. During the early stages of infection, infection and development occurred 1 d faster on susceptible cotton than on the resistant genotypes. Later, progression to the reniform and gravid stages of development occurred first on the susceptible genotype, followed by G. barbadense cultivar TX 110, and finally G. barbadense accession GB 713. Egg production by individual nematodes infecting the three genotypes was similar. This study corroborates delayed development previously reported on G. barbadense cultivar TX 110 and is the first report of delayed infection and development associated with G. barbadense accession GB 713. The different developmental patterns in the resistant genotypes suggest that unique or additional loci may confer resistance in these two lines.