Interaction of SecB and SecA with the N-terminal region of mature alkaline phosphatase on its secretion in Escherichia coli

Export-specific chaperone SecB and translocational ATPase SecA catalyze the cytoplasmic steps of Sec-dependent secretion in Escherichia coli. Their effects on secretion of periplasmic alkaline phosphatase (PhoA) were shown to depend on the N-terminal region of the mature PhoA sequence contained in the PhoA precursor. Amino acid substitutions in the vicinity of the signal peptide (positions +2, +3) not only dramatically inhibited secretion, but also reduced its dependence on SecB and SecA. Immunoprecipitation reported their impaired binding with mutant prePhoA. The results testified that SecB and SecA interact with the mature PhoA region located close to the signal peptide in prePhoA.     

Expression, secretion and processing of hirudin in E. coli using the alkaline phosphatase signal sequence

A DNA fragment coding for the E. coli phoA signal peptide was synthesized and inserted into the expression vector pKK223-3. A single HindIII restriction site is located just at the end of the signal sequence. A gene coding for the proteinase inhibitor hirudin, which has previously been synthesized, was inserted into this HindIII site. The hybrid protein was expressed under control of the tac-promoter and secreted into the periplasm of E. coli. From the periplasmic fraction two processed proteins were isolated. One of these was identical with desulfatohirudin and also had similar biological properties.     

SecA interacts with secretory proteins by recognizing the positive charge at the amino terminus of the signal peptide in Escherichia coli

SecA is an acidic, peripheral membrane protein involved in the translocation of secretory proteins across the cytoplasmic membrane. The direct interaction of SecA with secretory proteins was demonstrated by means of chemical cross-linking with 1-ethyl-3-(3-dimethylaminoprophyl)carbodiimide. OmpF-Lpp, a model secretory protein, carries either an uncleavable or cleavable signal peptide, and mutant secretory proteins derived from uncleavable OmpF-Lpp were used as translocation substrates. The interaction was SecA-specific. None of the control proteins, which are as acidic as SecA, was cross-linked with uncleavable OmpF-Lpp. The interaction was signal peptide-dependent. The interaction was increasingly enhanced as the number of positively charged amino acid residues at the amino-terminal region of the signal peptide was increased, irrespective of the species of amino acid residues donating the charge. Finally, parallelism was observed between the efficiency of interaction and that of translocation among mutant secretory proteins. It is suggested that precursors of secretory proteins interact with SecA to initiate the translocation reaction.     

Effect of export-specific cytoplasmic chaperone, protein SecB, on secretion of Escherichia coli alkaline phosphatase

The efficiency of secretion of Escherichia coli alkaline phosphatase depends on the presence in cells of a cytoplasmic chaperone—protein SecB. Secretion increases in the presence of this chaperone at 30°C, which is the most favorable for the interaction of SecB with the export-initiation domain found previously in the N-terminal region of the mature enzyme. This interaction most likely occurs in the region of the export domain, which is located close to the signal peptide and in complex with a translocational ATPase—protein SecA.     

Isolation and properties of immobilized alkaline phosphatase from E. coli

Preparations of alkaline phosphatase from E. coli, immobilized on Sepharose, with a specific activity of 40-60 U/g wet weight were obtained. The immobilized enzyme was stable up to 50 degrees C; at higher temperatures it was inactivated. At 70 degrees most of the activity was lost for 1 h. The substrate (AMP) stabilized the enzyme. In the temperature range from 30 to 40 degrees C activation of the enzyme was observed, especially pronounced in the presence of the substrate. The pH optimum of the immobilized enzyme activity (7.8-8.2) is shifted towards the acid region, as compared to the soluble enzyme (8.0-8.6). The kinetic parameters for inhibition by the reaction product were determined using the integral Michaelis-Menten equation. KmAMP was found to be higher in case of the immobilized enzyme as compared to the soluble one (5.02 X 10(-4) M and 1.85 X 10(-5) M, respectively), which seems to be associated with diffusion limitations.     

Reconstitution of denatured E. coli alkaline phosphatase with E. coli ribosome.

E. coli alkaline phosphatase was denatured by physical/chemical means. In vitro reconstitution of this denatured enzyme was assisted by 70S E. coli ribosome, as shown by the recovery of its catalytic competence. Almost total recovery of activity of the totally inactivated enzyme was obtained in presence of equimolar concentration of 70S ribosome at 50 degrees C.     

Interaction of SecB and SecA with the N-Terminal Region of Mature Alkaline Phosphatase on Its Secretion in Escherichia coli

Export-specific chaperone SecB and translocational ATPase SecA catalyze the cytoplasmic steps of Sec-dependent secretion in Escherichia coli. Their effects on secretion of periplasmic alkaline phosphatase (PhoA) were shown to depend on the N-terminal region of the mature PhoA sequence contained in the PhoA precursor. Amino acid substitutions in the vicinity of the signal peptide (positions +2, +3) not only dramatically inhibited secretion, but they also reduced its dependence on SecB. Immunoprecipitation reported their impaired binding with mutant prePhoA. The results testified that SecB and SecA interact with the mature PhoA region located close to the signal peptide in prePhoA.     

Hysteresis on heating and cooling of E. coli alkaline phosphatase

Measurements of [theta](222) of E. coli phosphatase on heating from 20 degrees to 90 degrees and subsequent cooling to 20 degrees shows a gradual increase in [theta](222) on heating, while cooling shows a symmetric transition centered at 45 degrees . Reheating and cooling shows the same phenomenon. Enzyme heated and cooled once is fully active. The activity of the enzyme depends on its storage conditions (buffer and pH for example), but such changes are least to some extent reversible, especially by heating in different solvents. We conclude the enzyme exists in several forms which are in slow equilibrium with each other, so that the enzyme responds slowly when heated and hence is not at equilibrium during heating/cooling experiments.     

The binding cascade of SecB to SecA to SecY/E mediates preprotein targeting to the E. coli plasma membrane

The export of many E. coli proteins such as proOmpA requires the cytosolic chaperone SecB and the membrane-bound preprotein translocase. Translocase is a multisubunit enzyme with the SecA protein as its peripheral membrane domain and the SecY/E protein as its integral domain. SecB, by binding to proOmpA in the cytosol, prevents its aggregation or association with membranes at nonproductive sites. The SecA receptor binds the proOmpA-SecB complex (Kd approximately 6 x 10(-8) M) through direct recognition of both the SecB (Kd approximately 2 x 10(-7) M) as well as the leader and mature domains of the precursor protein. SecB has a dual function in stabilizing the precursor and in passing it on to membrane-bound SecA, the next step in the pathway. SecA itself is bound to the membrane by its affinity (Kd approximately 4 x 10(-8) M) for SecY/E and for acidic lipids. The functions of SecB and SecA as a two-stage receptor system are linked by their affinity for each other.     

The conformation of a signal peptide bound by Escherichia coli preprotein translocase SecA

To understand the structural nature of signal sequence recognition by the preprotein translocase SecA, we have characterized the interactions of a signal peptide corresponding to a LamB signal sequence (modified to enhance aqueous solubility) with SecA by NMR methods. One-dimensional NMR studies showed that the signal peptide binds SecA with a moderately fast exchange rate (Kd approximately 10(-5) m). The line-broadening effects observed from one-dimensional and two-dimensional NMR spectra indicated that the binding mode does not equally immobilize all segments of this peptide. The positively charged arginine residues of the n-region and the hydrophobic residues of the h-region had less mobility than the polar residues of the c-region in the SecA-bound state, suggesting that this peptide has both electrostatic and hydrophobic interactions with the binding pocket of SecA. Transferred nuclear Overhauser experiments revealed that the h-region and part of the c-region of the signal peptide form an alpha-helical conformation upon binding to SecA. One side of the hydrophobic core of the helical h-region appeared to be more strongly bound in the binding pocket, whereas the extreme C terminus of the peptide was not intimately involved. These results argue that the positive charges at the n-region and the hydrophobic helical h-region are the selective features for recognition of signal sequences by SecA and that the signal peptide-binding site on SecA is not fully buried within its structure.     

Preprotein transfer to the Escherichia coli translocase requires the co-operative binding of SecB and the signal sequence to SecA

In Escherichia coli , precursor proteins are targeted to the membrane-bound translocase by the cytosolic chaperone SecB. SecB binds to the extreme carboxy-terminus of the SecA ATPase translocase subunit, and this interaction is promoted by preproteins. The mutant SecB proteins, L75Q and E77K, which interfere with preprotein translocation in vivo , are unable to stimulate in vitro translocation. Both mutants bind proOmpA but fail to support the SecA-dependent membrane binding of proOmpA because of a marked reduction in their binding affinities for SecA. The stimulatory effect of preproteins on the interaction between SecB and SecA exclusively involves the signal sequence domain of the preprotein, as it can be mimicked by a synthetic signal peptide and is not observed with a mutant preprotein (Δ8proOmpA) bearing a non-functional signal sequence. Δ8proOmpA is not translocated across wild-type membranes, but the translocation defect is suppressed in inner membrane vesicles derived from a prlA4 strain. SecB reduces the translocation of Δ8proOmpA into these vesicles and almost completely prevents translocation when, in addition, the SecB binding site on SecA is removed. These data demonstrate that efficient targeting of preproteins by SecB requires both a functional signal sequence and a SecB binding domain on SecA. It is concluded that the SecB–SecA interaction is needed to dissociate the mature preprotein domain from SecB and that binding of the signal sequence domain to SecA is required to ensure efficient transfer of the preprotein to the translocase.     

Removal of N-terminal methionine from recombinant proteins by engineered E. coli methionine aminopeptidase

The removal of N-terminal translation initiator Met by methionine aminopeptidase (MetAP) is often crucial for the function and stability of proteins. On the basis of crystal structure and sequence alignment of MetAPs, we have engineered Escherichia coli MetAP by the mutation of three residues, Y168G, M206T, Q233G, in the substrate-binding pocket. Our engineered MetAPs are able to remove the Met from bulky or acidic penultimate residues, such as Met, His, Asp, Asn, Glu, Gln, Leu, Ile, Tyr, and Trp, as well as from small residues. The penultimate residue, the second residue after Met, was further removed if the antepenultimate residue, the third residue after Met, was small. By the coexpression of engineered MetAP in E. coli through the same or a separate vector, we have successfully produced recombinant proteins possessing an innate N terminus, such as onconase, an antitumor ribonuclease from the frog Rana pipiens. The N-terminal pyroglutamate of recombinant onconase is critical for its structural integrity, catalytic activity, and cyto-toxicity. On the basis of N-terminal sequence information in the protein database, 85%-90% of recombinant proteins should be produced in authentic form by our engineered MetAPs.     

Factors affecting the zinc content of E. coli alkaline phosphatase

Through experiments with radioactively labeled EDTA, it has been shown that alkaline phosphatasc from E. coli has a high affinity for binding EDTA, requiring extensive dialysis for removal. This paper reviews the results of zinc analyses of E. coli alkaline phosphatase prepared in the presence and absence of EDTA. The presence of EDTA in most preparations of alkaline phosphatase accounts for previous overestimates of the zine content of the enzyme.With radioactively labeled EDTA, direct evidence for the binding of EDTA to the metal-free alkaline phosphatase is presented. It has been shown that the apoprotein binds two EDTA molecules rather strongly. Addition of four metal ions are necessary for reactivation of this EDTA-contaminated apoenzyme. However, when the EDTA-contaminated apoenzyme is subject for extensive dialysis and EDTA is removed, the addition of two zinc ions restores the enzyme activity completely.     

Phospholipids of E. coli and activity of alkaline phosphatase]

The effects of liposomes prepared from the E. coli lipids on the activity of soluble alkaline phosphatase and on the complementation reaction between its subunits were studied. It was shown that the liposomes nonspecifically catalyze the dimerization of the enzyme subunits without changing the dimer activity. The effects of phospholipases A2 and C on the activity of membrane-bound alkaline phosphatase were studied. An interrelationship was found between the level of hydrolysis of membrane phosphatidyl glycerol (PG) by these enzymes and the changes in the activity of membrane-bound alkaline phosphatase. It was also shown that PG is less accessible to the effects of phospholipases in the cells with derepressed biosynthesis of alkaline phosphatase. It is assumed that the membrane PG interacts with the membrane-bound alkaline phosphatase during its translocation into the periplasm.     

Metal-ion induced conformational changes in alkaline phosphatase from E. coli assessed by limited proteolysis

Alkaline phosphatase (AP) displays significant structural changes during metal-ion binding, supporting cooperative interactions between the subunits of the dimeric enzyme. Here, we present data on the dynamic properties of AP from E. coli, and characterize the structural changes that accompany variations in metal-ion content, combining limited proteolysis and MALDI-TOF mass spectrometry. Limited proteolysis revealed an internal cleavage site at Arg-293, reflecting a position of conformational flexibility supporting subunit communication essential for catalysis. A specific shielding of a region distant from the metal-binding site has been demonstrated, implying transmission of conformational changes, induced by metal-ion binding to the adjacent subunit, across the subunit interface.     

Expression of Escherichia coli SecB in Bacillus subtilis facilitates secretion of the SecB-dependent maltose-binding protein of E. coli.

Less than 20% of the Escherichia coli maltose-binding protein (MBP) synthesized in Bacillus subtilis is exported. However, a portion of the secreted MBP was processed cotranslationally. Coexpression of SecB, a secretion-related chaperone of E. coli, stimulated posttranslational export of MBP in B. subtilis but inhibited its cotranslational processing. Export of a SecB-independent MBP-ribose-binding protein hybrid precursor was not enhanced by SecB. A slowly folding MBP derivative (MBP-Y283D) was more efficiently secreted than wild-type MBP, suggesting that the antifolding activity of SecB promotes posttranslational secretion of MBP in B. subtilis.     

Expression and secretion of proteins in E. coli

This review outlines approaches to the cloning and expression of proteins in Escherichia coli. The expression vectors described here (pIN-III derivatives) utilize the strong lipoprotein promoter, which is controlled by the lac-UV5 promoter-operator. These vectors provide the means for targeting a protein to any of the four subcellular compartments of the bacterial cell: cytoplasm, cytoplasmic membrane, periplasm, and outer membrane. Of particular importance is that secretion of proteins into the E. coli periplasm (using the OmpA signal peptide) is applicable for the production of both prokaryotic and eukaryotic proteins thereby enhancing protein activity and stability.     

Mutations that alter the signal sequence of alkaline phosphatase in Escherichia coli.

A phoA-lacZ gene fusion was used to isolate mutants altered in the alkaline phosphatase signal sequence. This was done by selecting Lac+ mutants from a phoA-lacZ fusion strain that produces a membrane-bound hybrid protein and is unable to grow on lactose. Two such mutant derivatives were characterized. The mutations lie within the phoA portion of the fused gene and cause internalization of the hybrid protein. When the mutations were genetically recombined into an otherwise wild-type phoA gene, they interfered with export of alkaline phosphatase to the periplasm. The mutant alkaline phosphatase protein was found instead in the cytoplasm in precursor form. DNA sequence analysis demonstrated that both mutations lead to amino acid alterations in the signal sequence of alkaline phosphatase.     

A mutation of Escherichia coli SecA protein that partially compensates for the absence of SecB.

The Escherichia coli SecB protein is a cytosolic chaperone protein that is required for rapid export of a subset of exported proteins. To aid in elucidation of the activities of SecB that contribute to rapid export kinetics, mutations that partially suppressed the export defect caused by the absence of SecB were selected. One of these mutations improves protein export in the absence of SecB and is the result of a duplication of SecA coding sequences, leading to the synthesis of a large, in-frame fusion protein. Unexpectedly, this mutation conferred a second phenotype. The secA mutation exacerbated the defective protein export caused by point mutations in the signal sequence of pre-maltose-binding protein. One explanation for these results is that the mutant SecA protein has sustained a duplication of its binding site(s) for exported protein precursors so that the mutant SecA is altered in its interaction with precursor molecules.