Conjugation of spermine enhances cellular uptake of the stapled peptide-based inhibitors of p53-Mdm2 interaction

We report the first synthesis of the C-terminally spermine-conjugated stapled peptide-based inhibitors of the p53-Mdm2 interaction. Subsequent biological, biophysical and cellular uptake assays with the spermine-conjugated stapled peptides revealed that spermine conjugation minimally affects biological activity while significantly increases peptide helicity and cellular uptake without apparent cytotoxicity.     

Design of antiviral stapled peptides containing a biphenyl cross-linker

Here we report the design and synthesis of a panel of stapled peptides containing a distance-matching biphenyl cross-linker based upon a peptide capsid assembly inhibitor reported previously. Compared with the linear peptide, the biphenyl-stapled peptides exhibited significantly enhanced cell penetration and potent antiviral activity in the cell-based infection assays. Isothermal titration calorimetry and surface plasmon resonance experiments revealed that the most active stapled CAI peptide binds to the C-terminal domain of HIV capsid protein as well as envelop glycoprotein gp120 with low micromolar binding affinities, and as a result, inhibits both the HIV-1 virus entry and the virus assembly.     

Effect of hydrocarbon stapling on the properties of α-helical antimicrobial peptides isolated from the venom of hymenoptera

The impact of inserting hydrocarbon staples into short α-helical antimicrobial peptides lasioglossin III and melectin (antimicrobial peptides of wild bee venom) on their biological and biophysical properties has been examined. The stapling was achieved by ring-closing olefin metathesis, either between two S-2-(4′-pentenyl) alanine residues (S ₅) incorporated at i and i + 4 positions or between R-2-(7′-octenyl) alanine (R ₈) and S ₅ incorporated at the i and i + 7 positions, respectively. We prepared several lasioglossin III and melectin analogs with a single staple inserted into different positions within the peptide chains as well as analogs with double staples. The stapled peptides exhibited a remarkable increase in hemolytic activity, while their antimicrobial activities decreased. Some single stapled peptides showed a higher resistance against proteolytic degradation than native ones, while the double stapled analogs were substantially more resistant. The CD spectra of the singly stapled peptides measured in water showed only a slightly better propensity to form α-helical structure when compared to native peptides, whereas the doubly stapled analogs exhibited dramatically enhanced α-helicity.     

Structure of a Stapled Peptide Antagonist Bound to Nutlin-Resistant Mdm2

As key negative regulator of the p53 tumour suppressor, Mdm2 is an attractive therapeutic target. Small molecules such as Nutlin have been developed to antagonise Mdm2, resulting in p53-dependent death of tumour cells. We have recently described a mutation in Mdm2 (M62A), which precludes binding of Nutlin, but not p53. This Nutlin-resistant variant is not, however, refractory to binding and inhibition by stapled peptide antagonists targeting the same region of Mdm2. A detailed understanding of how stapled peptides are recalcitrant to Mdm2 mutations conferring Nutlin-resistance will aid in the further development of potent Mdm2 antagonists. Here, we report the 2.00 Å crystal structure of a stapled peptide antagonist bound to Nutlin resistant Mdm2. The stapled peptide relies on an extended network of interactions along the hydrophobic binding cleft of Mdm2 for high affinity binding. Additionally, as seen in other stapled peptide structures, the hydrocarbon staple itself contributes to binding through favourable interactions with Mdm2. The structure highlights the intrinsic plasticity present in both Mdm2 and the hydrocarbon staple moiety, and can be used to guide future iterations of both small molecules and stapled peptides for improved antagonists of Mdm2.     

The Stapled AKAP Disruptor Peptide STAD-2 Displays Antimalarial Activity through a PKA-Independent Mechanism

Drug resistance poses a significant threat to ongoing malaria control efforts. Coupled with lack of a malaria vaccine, there is an urgent need for the development of new antimalarials with novel mechanisms of action and low susceptibility to parasite drug resistance. Protein Kinase A (PKA) has been implicated as a critical regulator of pathogenesis in malaria. Therefore, we sought to investigate the effects of disrupted PKA signaling as a possible strategy for inhibition of parasite replication. Host PKA activity is partly regulated by a class of proteins called A Kinase Anchoring Proteins (AKAPs), and interaction between HsPKA and AKAP can be inhibited by the stapled peptide Stapled AKAP Disruptor 2 (STAD-2). STAD-2 was tested for permeability to and activity against Plasmodium falciparum blood stage parasites in vitro. The compound was selectively permeable only to infected red blood cells (iRBC) and demonstrated rapid antiplasmodial activity, possibly via iRBC lysis (IC₅₀ ≈ 1 μM). STAD-2 localized within the parasite almost immediately post-treatment but showed no evidence of direct association with PKA, indicating that STAD-2 acts via a PKA-independent mechanism. Furosemide-insensitive parasite permeability pathways in the iRBC were largely responsible for uptake of STAD-2. Further, peptide import was highly specific to STAD-2 as evidenced by low permeability of control stapled peptides. Selective uptake and antiplasmodial activity of STAD-2 provides important groundwork for the development of stapled peptides as potential antimalarials. Such peptides may also offer an alternative strategy for studying protein-protein interactions critical to parasite development and pathogenesis.     

Designing dual inhibitors of Mdm2/MdmX: Unexpected coupling of water with gatekeeper Y100/99

Mdm2 and MdmX share high structural similarity in their N‐terminal domains, yet dual inhibitors are challenging to design due to differences in the conformations of the binding pockets, and notably of the proposed gatekeeper residue, Y100/99. Analysis of crystal structures and molecular dynamics (MD) simulations of complexes of Mdm2 and MdmX resulted in the identification of a water molecule with a long residence time that appears to be modulated by the conformation of Y100/99. These observations lead us to speculate that dual inhibitors either (i) stabilize both Mdm2 and MdmX with Y100/99 in the open conformation typically seen in complexes of Mdm2 with p53, or (ii) the dual inhibitors are agnostic to the conformation of Y100/99. The recently developed potent dual inhibitory stapled peptide Atsp7041 appears to be agnostic to the conformation of the gatekeeper residue. Proteins 2017; 85:1493–1506. © 2017 Wiley Periodicals, Inc.     

Macrocyclic α helical peptide therapeutic modality: A perspective of learnings and challenges

Macrocyclic α-helical peptides have emerged as a compelling new therapeutic modality to tackle targets confined to the intracellular compartment. Within the scope of hydrocarbon-stapling there has been significant progress to date, including the first stapled α-helical peptide to enter into clinical trials. The principal design concept of stapled α-helical peptides is to mimic a cognate (protein) ligand relative to binding its target via an α-helical interface. However, it was the proclivity of such stapled α-helical peptides to exhibit cell permeability and proteolytic stability that underscored their promise as unique macrocyclic peptide drugs for intracellular targets. This perspective highlights key learnings as well as challenges in basic research with respect to structure-based design, innovative chemistry, cell permeability and proteolytic stability that are essential to fulfill the promise of stapled α-helical peptide drug development.     

Hydrocarbon stapled B chain analogues of relaxin-3 retain biological activity

Relaxin-3 or insulin-like peptide 7 (INSL7) is the most recently discovered relaxin/insulin-like family peptide. Mature relaxin-3 consists of an A chain and a B chain held by disulphide bonds. According to structure activity relationship studies, the relaxin-3 B chain is more important in binding and activating the receptor. RXFP3 (also known as Relaxin-3 receptor 1, GPCR 135, somatostatin- and angiotensin- like peptide receptor or SALPR) was identified as the cognate receptor for relaxin-3 by expression profiles and binding studies. Recent studies imply roles of this system in mediating stress and anxiety, feeding, metabolism and cognition. Stapling of peptides is a technique used to develop peptide drugs for otherwise undruggable targets. The main advantages of stapling include, increased activity due to reduced proteolysis, increased affinity to receptors and increased cell permeability. Stable agonists and antagonists of RXFP3 are crucial for understanding the physiological significance of this system. So far, agonists and antagonists of RXFP3 are peptides. In this study, for the first time, we have introduced stapling of the relaxin-3 B chain at 14th and 18th positions (14s18) and 18th and 22nd position (18s22). These stapled peptides showed greater helicity than the unstapled relaxin-3 B chain in circular dichroism analysis. Both stapled peptides bound RXFP3 and activated RXFP3 as observed in an inhibition of forskolin-induced cAMP assay and a ERK1/2 activation assay, although with different potencies. Therefore, we conclude that stapling of the relaxin3 B chain does not compromise its ability to activate RXFP3 and is a promising method for developing stable peptide agonists and antagonists of RXFP3 to aid relaxin-3/RXFP3 research.     

Influence of hydrocarbon-stapling on membrane interactions of synthetic antimicrobial peptides

Cyclization has been recognized as a valuable technique for increasing the efficacy of small molecule and peptide therapeutics. Here we report the application of a hydrocarbon staple to a rationally-designed cationic antimicrobial peptide (CAP) that acquires increased membrane targeting and interaction vs. its linear counterpart. The previously-described CAP, 6K-F17 (KKKKKK-AAFAAWAAFAA-NH₂) was used as the backbone for incorporation of an i to i?+?4 helical hydrocarbon staple through olefin ring closing metathesis. Stapled versions of 6K-F17 showed an increase in non-selective membrane interaction, where the staple itself enhances the degree of membrane interaction and rate of cell death while maintaining high potency against bacterial membranes. However, the higher averaged hydrophobicity imparted by the staple also significantly increases toxicity to mammalian cells. This deleterious effect is countered through stepwise reduction of the stapled 6K-F17’s backbone hydrophobicity through polar amino acid substitutions. Circular dichroism assessment of secondary structure in various bacterial membrane mimetics reveals that a helical structure may improve – but is not an absolute requirement for – antimicrobial activity of 6K-F17. Further, phosphorus-31 static solid state NMR spectra revealed that both non-toxic stapled and linear peptides bind bacterial membranes in a similar manner that does not involve a detergent-like mechanism of lipid removal. The overall results suggest that the technique of hydrocarbon stapling can be readily applied to membrane-interactive CAPs to modulate how they interact and target biological membranes.     

Stereochemical effects of all-hydrocarbon tethers in i,i+4 stapled peptides

The stereochemical effects of the hydrocarbon crosslink on the conformation and cellular uptake of i,i+4 stapled peptides were studied. Compared to its S,S-configurated counterpart, the crosslink bearing the R,R-configuration provided a significantly diminished helix stabilizing effect and conferred less efficient cellular uptake on the stapled peptides. These results suggest that the vesicular trafficking pathway employed by cells to take up stapled peptides is sensitive to the extent of helical character in the peptide, with greater helicity conferring increased cellular uptake.     

A switchable stapled peptide

The O‐N acyl transfer reaction has gained significant popularity in peptide and medicinal chemistry. This reaction has been successfully applied to the synthesis of difficult sequence‐containing peptides, cyclic peptides, epimerization‐free fragment coupling and more recently, to switchable peptide polymers. Herein, we describe a related strategy to facilitate the synthesis and purification of a hydrophobic stapled peptide. The staple consists of a serine linked through an amide bond formed from its carboxylic acid function and the side chain amino group of diaminopropionic acid and through an ester bond formed from its amino group and the side chain carboxylic acid function of aspartic acid. The α‐amino group of serine was protonated during purification. Interestingly, when the peptide was placed at physiological pH, the free amino group initiated the O‐N shift reducing the staple length by one atom, leading to a more hydrophobic stapled peptide. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Stapled peptides in the p53 pathway: Computer simulations reveal novel interactions of the staples with the target protein

Atomistic simulations of a set of stapled peptides derived from the transactivation domain of p53 (designed by Verdine & colleagues, JACS 2007 129:2456) and complexed to MDM2 reveal that the good binders are uniquely characterized by higher helicity and by extensive interactions between the hydrocarbon staples and the MDM2 surface; in contrast the poor binders have reduced helicity and their staples are mostly solvent exposed. Our studies also find that the best binders can also potentially inhibit MDMX with similar affinities, suggesting that such stapled peptides can be evolved for dual inhibition with therapeutic potential.     

Stapled peptide-based membrane fusion inhibitors of hepatitis C virus

The strategy of peptide stapling was used to develop new molecules to inhibit the hepatitis C virus infection via disrupting the binding of HCV envelope glycoprotein E2 with human cell surface protein CD81. The peptide sequence was designed based on the large extra-cellular loop of CD81 with known importance in the HCV E2 binding interaction. Our results showed that the stapled peptides exhibited significantly higher α-helicity and proteolytic stability as compared to their linear peptide counterpart. The optimal compound was found to have an EC₅₀ value of ca. 17–39 μM against different HCV subtypes and represented a new HCV membrane fusion inhibitor.     

Hydrocarbon Stapled Antimicrobial Peptides

Antimicrobial peptides are promising candidates for anti-infective pharmaceuticals. Unfortunately, because of their low proteolytic and chemical stability, their usage is generally narrowed down to topical formulations. Until now, numerous approaches to increase peptide stability have been proposed. One of them, peptide hydrocarbon stapling, a modification based on stabilizing peptide secondary structure with a side-chain covalent hydrocarbon bridge, have been successfully applied to many peptides. Moreover, constraining secondary structure of peptides have also been proven to increase their biological activity. This review article describes studies on hydrocarbon stapled antimicrobial peptides with respect to improved drug-like properties.     

Novel structures of self-associating stapled peptides

Hydrocarbon stapling of peptides is a powerful technique to transform linear peptides into cell-permeable helical structures that can bind to specific biological targets. In this study, we have used high resolution solution NMR techniques complemented by dynamic light scattering to characterize extensively a family of hydrocarbon stapled peptides with known inhibitory activity against HIV-1 capsid assembly to evaluate the various factors that modulate activity. The helical peptides share a common binding motif but differ in charge, the length, and position of the staple. An important outcome of the study was to show the peptides, share a propensity to self-associate into organized polymeric structures mediated predominantly by hydrophobic interactions between the olefinic chain and the aromatic side-chains from the peptide. We have also investigated in detail the structural significance of the length and position of the staple, and of olefinic bond isomerization in stabilizing the helical conformation of the peptides as potential factors driving polymerization. This study presents the numerous challenges of designing biologically active stapled peptides and the conclusions have broad implications for optimizing a promising new class of compounds in drug discovery.     

Stapled BH3 Peptides against MCL-1: Mechanism and Design Using Atomistic Simulations

Atomistic simulations of a set of stapled alpha helical peptides derived from the BH3 helix of MCL-1 (Stewart et al. (2010) Nat Chem Biol 6: 595-601) complexed to a fragment (residues 172-320) of MCL-1 revealed that the highest affinity is achieved when the staples engage the surface of MCL-1 as has also been demonstrated for p53-MDM2 (Joseph et al. (2010) Cell Cycle 9: 4560-4568; Baek et al. (2012) J Am Chem Soc 134: 103-106). Affinity is also modulated by the ability of the staples to pre-organize the peptides as helices. Molecular dynamics simulations of these stapled BH3 peptides were carried out followed by determination of the energies of interactions using MM/GBSA methods. These show that the location of the staple is a key determinant of a good binding stapled peptide from a bad binder. The good binder derives binding affinity from interactions between the hydrophobic staple and a hydrophobic patch on MCL-1. The position of the staple was varied, guiding the design of new stapled peptides with higher affinities.     

Bridged Analogues for p53-Dependent Cancer Therapy Obtained by <Emphasis Type="Italic">S</Emphasis>-Alkylation

A small library of anticancer, cell-permeating, stapled peptides based on potent dual-specific antagonist of p53–MDM2/MDMX interactions, PMI-N8A, was synthesized, characterized and screened for anticancer activity against human colorectal cancer cell line, HCT-116. Employed synthetic modifications included: S-alkylation-based stapling, point mutations increasing hydrophobicity in key residues as well as improvement of cell-permeability by introduction of polycationic sequence(s) that were woven into the sequence of parental peptide. Selected analogue, ArB14Co, was also tested in vivo and exhibited potent anticancer bioactivity at the low dose (3.0 mg/kg). Collectively, our findings suggest that application of stapling in combination with rational design of polycationic short analogues may be a suitable approach in the development of physiologically active p53–MDM2/MDMX peptide inhibitors.     

Sam domain-based stapled peptides: Structural analysis and interaction studies with the Sam domains from the EphA2 receptor and the lipid phosphatase Ship2

Sam (Sterile alpha motif) domains represent small helical protein-protein interaction modules which play versatile functions in different cellular processes. The Sam domain from the EphA2 receptor binds the Sam domain of the lipid phosphatase Ship2 and this interaction modulates receptor endocytosis and degradation primarily generating pro-oncogenic effects in cell. To identify molecule antagonists of the EphA2-Sam/Ship2-Sam complex with anti-cancer activity, we focused on hydrocarbon helical stapled peptides. EphA2-Sam and one of its interactors (i.e., the first Sam domain of the adaptor protein Odin) were used as model systems for peptide design. Increase in helicity in the stapled peptides, with respect to the corresponding linear/native-like regions, was proved by structural studies conducted through CD (Circular Dichroism) and NMR (Nuclear Magnetic Resonance). Interestingly, interaction assays by means of NMR, SPR (Surface Plasmon Resonance) and MST (MicroScale Thermophoresis) techniques led to the discovery of a novel ligand of Ship2-Sam.     

d-Amino acid mutation of PMI as potent dual peptide inhibitors of p53-MDM2/MDMX interactions

According to the previously reported potent dual l-peptide PMI of p53-MDM2/MDMX interactions, a series of d-amino acid mutational PMI analogues, PMI-1-4, with enhanced proteolytic resistence and in vitro tumor cell inhibitory activities were reported, of which Liposome-PMI-1 showed a stronger inhibitory activity against the U87 cell lines than Nutlin-3. This d-amino acid mutation strategy may give a hand for enhancing the potential of peptide drugs.     

Inhibition of HIV-1 infection by synthetic peptide analogues derived from the NH(2)-Terminal extracellular region of GPR1

Several shortened peptide analogues of the N-terminal domain of GPR1, an orphan G protein-coupled receptor (GPCR), were prepared and their anti-HIV-1 activities were evaluated. Some of the prepared compounds, especially sulfated derivatives, showed potent inhibitory activity against a broad range of HIV-1, including T cell-tropic, dual cell-tropic and brain-derived (BT) cell-tropic HIV-1 strains.