Response to high-pressure, low-temperature treatment in vegetables: determination of survival rates of microbial populations using flow cytometry and detection of peroxidase activity using confocal microscopy

Application of high hydrostatic pressure (200, 300, 350 and 400 MPa) at 5 degrees C for 30 min to different micro-organisms, including Gram-positive and Gram-negative bacteria, moulds and yeasts, proved to be more effective in inactivating these organisms than treatments at 20 degrees C for 10 min and at 10 degrees C for 20 min. Moulds, yeasts, Gram-negative bacteria and Listeria monocytogenes were most sensitive, and their populations were completely inactivated at pressures between 300 and 350 MPa. The same conditions of pressure, temperature, and time were applied to different vegetables (lettuce, tomato, asparagus, spinach, cauliflower and onion), achieving reductions of from 2-4 log units in both viable mesophiles and moulds and yeasts at pressures of between 300 and 400 MPa. Sensory characteristics were unaltered, especially in asparagus, onion, tomato and cauliflower, though slight browning was observed in cauliflower at 350 MPa. Flow cytometry was applied to certain of the microbial populations used in the above experiment before and after the pressurization treatment. The results were indicative of differing percentage survival rates depending on micro-organism type, with higher survival rates for Gram-positive bacteria, except L. monocytogenes, than in the other test micro-organisms. Growth of survivors was undetectable using the plate count method, suggesting that micro-organisms suffering from pressure stress were metabolically inactive though alive. The pressurization treatments did not inactivate the peroxidase responsible for browning in vegetables. Confocal microscopic examination of epidermal tissue from onion showed that the enzyme had been displaced to the cell interior. Use of low temperatures and moderately long pressurization times yielded improved inactivation of micro-organisms and better sensorial characteristics of the vegetables, and should lower industrial costs.     

Effect of high pressure on the reduction of microbial populations in vegetables

Resistance of micro-organisms to high pressure is variable and directly related to extrinsic and intrinsic factors. Pressures of 100, 200, 300, 350 and 400 MPa were applied at 20°C for 10 min and at 10°C for 20 min using strains of Gram-positive and Gram-negative bacteria, moulds and yeasts, as well as spores of Gram-positive bacteria. The results showed that at pressures of 100 and 200 MPa, decreases in microbial populations were not significant, whereas the populations of all the micro-organisms tested decreased considerably at a pressure of 300 MPa. A pressure of 300 MPa at 10°C for 20 min was required to completely reduce the population of Saccharomyces cerevisiae , and a pressure of 350 MPa was needed to reduce most of the Gram-negative bacteria and moulds. The Gram-positive bacteria were more resistant, and pressures of 400 MPa were unable to completely reduce their populations. The different pressures employed had little effect on the initial numbers of spores. The initial populations of viable aerobic mesophiles and moulds and yeasts in vegetables (lettuce and tomatoes) decreased 1 log unit at pressures of 300 MPa and above under both sets of experimental treatment conditions. However, treatment at that pressure also resulted in alterations in the organoleptic properties of the samples. In the tomatoes, the skin loosened and peeled away, though the flesh remained firm, and colour and flavour were unchanged. The lettuce remained firm but underwent browning; flavour was unaffected. In vegetables use of moderate pressures in combination with other treatment conditions would appear to be required to reduce the populations of contaminating micro-organisms while avoiding the undesirable alterations in organoleptic properties that take place at 300 MPa.     

Efficiency of high pressure treatment for destruction of Listeria monocytogenes in fruit juices

The objective of this study was to compare high pressure resistance of Listeria monocytogenes strains at 25 degrees C and 50 degrees C at 350 MPa and to use high pressure (250 MPa and 350 MPa) at 30 degrees C and 40 degrees C for the inactivation of the relatively most pressure resistant strain inoculated in pasteurized apple, apricot, cherry and orange juices. L. monocytogenes CA was found to be the relatively most pressure resistant strain and increasing pressurization from 250 MPa to 350 MPa at 30 degrees C had an additional three to four log cycle reduction in viability, still leaving viable cells after 5 min. When 350 MPa at 40 degrees C for 5 min was applied more than eight log cycle reduction in cell population of all fruit juices was achieved. This study demonstrated that low temperature (40 degrees C) high pressure (350 MPa) treatment has the potential to inactivate relatively pressure resistant L. monocytogenes strains inoculated in different fruit juices within 5 min.     

High-pressure inactivation of Saccharomyces cerevisiae and Lactobacillus plantarum at subzero temperatures

High hydrostatic pressure is a new technology in the food processing industry, and is used for cold pasteurization of food products. However, the pressure inactivation of food-borne microorganisms requires very high pressures (generally more than 400 MPa) and long pressure holding times (5 min or more). Carrying out pressure processing at low temperatures without freezing can reduce these parameters, which presently limit the application of this technology, in keeping the quality of fresh raw product. The yeast, Saccharomyces cerevisiae and the bacterium, Lactobacillus plantarum were pressurized for 10 min at temperatures between -20 and 25 degrees C and pressure between 100 and 350 MPa. Pressurization at subzero temperatures without freezing significantly enhanced the effect of pressure. For example, at a pressure of 150 MPa, the decrease in temperature from ambient to -20 degrees C allowed an increase in the pressure-induced inactivation from less than 1 log up to 7-8 log for each microorganism studied. However, for comparable inactivation levels, the kinetics of microorganism inactivation did not differ, which suggests identical inactivation mechanisms. Implications of water thermodynamical properties like compression, protein denaturation, as well as membrane phase transitions, are discussed.     

Inactivation of Salmonella Typhimurium and Listeria monocytogenes using high-pressure treatments: destruction or sublethal stress?

AIMS: To investigate potential resuscitation of Listeria monocytogenes and Salmonella Typhimurium after high hydrostatic pressure treatments. METHODS AND RESULTS: Pressure treatments were applied at room temperature for 10 min on bacterial suspensions in buffers at pH 7 and 5.6. Total bacterial inactivation (8 log(10) CFU ml(-1) of bacterial reduction) obtained by conventional plating was achieved regarding both micro-organisms. Treatments at 400 MPa in pH 5.6 and 600 MPa in pH 7 for L. monocytogenes and at 350 MPa in pH 5.6 and 400 MPa in pH 7 for S. Typhimurium were required respectively. A 'direct viable count' method detected some viable cells in the apparently totally inactivated population. Resuscitation was observed for the two micro-organisms during storage (at 4 and 20 degrees C) after almost all treatments. In the S. Typhimurium population, 600 MPa, 10 min, was considered as the treatment achieving total destruction because no resuscitation was observed under these storage conditions. CONCLUSIONS: We suggest a delay before performing counts in treated samples in order to avoid the under-evaluation of surviving cells. SIGNIFICANCE AND IMPACT OF THE STUDY: The resuscitation of pathogen bacteria after physical treatments like high hydrostatic pressure has to be considered from the food safety point of view. Further studies should be performed in food products to study this resuscitation phenomenon.     

Induction of Shiga toxin-converting prophage in Escherichia coli by high hydrostatic pressure

Since high hydrostatic pressure is becoming increasingly important in modern food preservation, its potential effects on microorganisms need to be thoroughly investigated. In this context, mild pressures (<200 MPa) have recently been shown to induce an SOS response in Escherichia coli MG1655. Due to this response, we observed a RecA- and LexA-dependent induction of lambda prophage upon treating E. coli lysogens with sublethal pressures. In this report, we extend this observation to lambdoid Shiga toxin (Stx)-converting bacteriophages in MG1655, which constitute an important virulence trait in Stx-producing E. coli strains (STEC). The window of pressures capable of inducing Stx phages correlated well with the window of bacterial survival. When pressure treatments were conducted in whole milk, which is known to promote bacterial survival, Stx phage induction could be observed at up to 250 MPa in E. coli MG1655 and at up to 300 MPa in a pressure-resistant mutant of this strain. In addition, we found that the intrinsic pressure resistance of two types of Stx phages was very different, with one type surviving relatively well treatments of up to 400 MPa for 15 min at 20 degrees C. Interestingly, and in contrast to UV irradiation or mitomycin C treatment, pressure was not able to induce Stx prophage or an SOS response in several natural Stx-producing STEC isolates.     

Activity and stability of a neutral protease from Vibrio sp. (vimelysin) in a pressure-temperature gradient.

The apparent second-order rate constant of hydrolysis of Fua-Gly-LeuNH2 by vimelysin, a neutral protease from Vibrio sp. T1800, was measured in a variable pressure-temperature gradient (0. 1-400 MPa and 5-40 degrees C). The apparent maximum rate was observed at approximately 15 degrees C and 150-200 MPa; the pressure-activation ratio (kcat/Km(max)/kcat/Km(0.1 MPa)) was reached about sevenfold. The pressure dependence of the kcat and Km parameters at constant temperature (25 degrees C) revealed that the pressure-activation below 200 MPa was mainly caused by a change in the kcat parameter. The change in the intrinsic fluorescence intensity of vimelysin was also measured in a pressure-temperature plane (0.1-400 MPa and -20 to +60 degrees C). The fluorescence intensity was found to decrease by increasing pressure and temperature, and the isointensity contours were more or less circular. The tangential lines to the contours at high temperatures and low to medium pressures seem to have slightly positive slopes, which was reflected by the higher residual activities left after incubations at higher temperatures and medium pressure (200 MPa and 50 degrees C) and by the almost intact secondary structure left after 1 h of incubation at 200 MPa and 40 degrees C, as studied by circular dichroism. These results were compared with the corresponding results for thermolysin, a moderately thermostable protease from Bacillus thermoproteolyticus. Apparent differences that might be related to the temperature adaptations of the respective source microbes are also discussed.     

The effect of high hydrostatic pressure on Listeria monocytogenes in phosphate-buffered saline and model food systems

Three strains of Listeria monocytogenes (NCTC 11994, a poultry isolate and the Scott A strain) were exposed to a range of pressures (300, 350, 375, 400 and 450 MPa) in 10 mmol l⁻¹ phosphate-buffered saline (PBS) at pH 7·0 for up to 30 min at ambient temperature. Generally, increasing the magnitude and duration of compression resulted in increasing levels of inactivation, although the inactivation kinetics varied depending on the strain and pressure applied. The three strains also exhibited a wide variation in their resistance to high pressure. The resistance of the three strains to high pressure (375 MPa) was also assessed in a series of model food systems containing one of each of the three main food constituents: protein (1, 2, 5 and 8% w/v bovine serum albumin in PBS), carbohydrate (1, 2, 5 and 10% w/v glucose in PBS) and lipid (olive oil (30% v/v) in PBS emulsion). Overall, increasing the concentrations of bovine serum albumin (BSA) and glucose in the suspending medium resulted in decreasing levels of inactivation of all three strains; however, the minimum concentration of BSA and glucose required to increase survival to a level greater than that observed in PBS alone varied depending on the strain and on the duration of the treatment. The survival of all three strains was greater in the olive oil/PBS emulsion than in PBS alone at all treatment times.     

Factors affecting the pressure resistance of some Campylobacter species

AIMS: To compare pressure resistance between strains of Campylobacter jejuni, Campylobacter coli, Campylobacter lari and Campylobacter fetus, and to investigate the effect of suspending medium on pressure resistance of sensitive and more resistant strains. METHODS AND RESULTS: Six strains of C. jejuni and four each of C. coli, C. lari and C. fetus were pressure treated for 10 min at 200 and 300 MPa. Individual strains varied widely in pressure resistance but there were no significant differences between the species C. jejuni, C. coli and C. lari. Campylobacter fetus was significantly more pressure sensitive than the other three species. The pressure resistance of C. jejuni cultures reached a maximum at 16-18 h on entry into stationary phase then declined to a minimum at 75 h before increasing once more. Milk was more baroprotective than water, broth or chicken slurry but did not prevent inactivation even of a resistant strain at 400 MPa. CONCLUSIONS: Pressure resistance varies considerably between species of Campylobacter and among strains within a species, and survival after a pressure challenge will be markedly influenced by culture age and food matrix. SIGNIFICANCE AND IMPACT OF THE STUDY: Despite the strain variation in pressure resistance and protective effects of food, Campylobacter sp. do not present a particular problem for pressure processing.     

Inactivation of Campylobacter jejuni by high hydrostatic pressure

AIMS: To investigate the response of Campylobacter jejuni ATCC 35919 and 35921 to high pressure processing (HPP) while suspended in microbiological media and various food systems. METHODS AND RESULTS: Campylobacter jejuni 35919 and 35921 were subjected to 10-min pressure treatments between 100 and 400 MPa at 25 degrees C suspended in Bolton broth, phosphate buffer (0.2 m, pH 7.3), ultra-high temperature (UHT) whole milk, UHT skim milk, soya milk and chicken pureé. The survivability of C. jejuni was further investigated by inoculated pack studies. HPP at 300-325 MPa for 10 min at 25 degrees C was sufficient to reduce viable numbers of both strains to below detectable levels when cells were pressurized in Bolton broth or phosphate buffer. All food products examined offered a protective effect in that an additional 50-75 MPa was required to achieve similar levels of inactivation when compared with broth and buffer. Inoculated pack studies showed that the survivability of C. jejuni following pressurization improved with decreasing post-treatment storage temperature. SIGNIFICANCE AND IMPACT OF THE STUDY: These data demonstrated that HPP at levels of 相似文献   

Use of hydrostatic pressure for inactivation of microbial contaminants in cheese

The objective of this study was to determine the effect of high pressure (HP) on the inactivation of microbial contaminants in Cheddar cheese (Escherichia coli K-12, Staphylococcus aureus ATCC 6538, and Penicillium roqueforti IMI 297987). Initially, cheese slurries inoculated with E. coli, S. aureus, and P. roqueforti were used as a convenient means to define the effects of a range of pressures and temperatures on the viability of these microorganisms. Cheese slurries were subjected to pressures of 50 to 800 MPa for 20 min at temperatures of 10, 20, and 30 degrees C. At 400 MPa, the viability of P. roqueforti in cheese slurry decreased by >2-log-unit cycles at 10 degrees C and by 6-log-unit cycles at temperatures of 20 and 30 degrees C. S. aureus and E. coli were not detected after HP treatments in cheese slurry of >600 MPa at 20 degrees C and >400 MPa at 30 degrees C, respectively. In addition to cell death, the presence of sublethally injured cells in HP-treated slurries was demonstrated by differential plating using nonselective agar incorporating salt or glucose. Kinetic experiments of HP inactivation demonstrated that increasing the pressure from 300 to 400 MPa resulted in a higher degree of inactivation than increasing the pressurization time from 0 to 60 min, indicating a greater antimicrobial impact of pressure. Selected conditions were subsequently tested on Cheddar cheese by adding the isolates to cheese milk and pressure treating the resultant cheeses at 100 to 500 MPa for 20 min at 20 degrees C. The relative sensitivities of the isolates to HP in Cheddar cheese were similar to those observed in the cheese slurry, i.e., P. roqueforti was more sensitive than E. coli, which was more sensitive than S. aureus. The organisms were more sensitive to pressure in cheese than slurry, especially with E. coli. On comparison of the sensitivities of the microorganisms in a pH 5.3 phosphate buffer, cheese slurry, and Cheddar cheese, greatest sensitivity to HP was shown in the pH 5.3 phosphate buffer by S. aureus and P. roqueforti while greatest sensitivity to HP by E. coli was exhibited in Cheddar cheese. Therefore, the medium in which the microorganisms are treated is an important determinant of the level of inactivation observed.     

A role for proline synthesis and transport in Listeria monocytogenes barotolerance

Aims: To assess the contribution of proline biosynthesis to listerial barotolerance. Methods and Results: Using a Listeria monocytogenes proBA deletion mutant, incapable of synthesizing proline, together with a proline‐overproducing strain, the contribution of proline synthesis to listerial barotolerance was determined. The ΔproBA strain does not survive as well as the wild type when subjected to treatment of 500 MPa in rich media and 400 MPa in minimal media (c. 1 log lower survival in both conditions). Betaine and carnitine decrease the ability of the wild type to survive at low pressures (300 MPa), but confer normal or slightly increased levels of protection at higher pressures (350 and 400 MPa). Conclusions: A functional proline synthesis system is required for optimal survival of Listeria following treatment at high‐pressure (HP) levels (500 MPa in brain heart infusion and 400 MPa in defined medium), particularly where other compatible solutes are absent or limiting. Significance and Impact of the Study: Given the potential of HP processing as an effective food processing/safety strategy, understanding how pathogens such as Listeria have evolved to cope with such stresses is an important food safety consideration. In this context, the work presented here may help to develop safer and more effective processing regimens.     

Induction of Shiga Toxin-Converting Prophage in Escherichia coli by High Hydrostatic Pressure

Since high hydrostatic pressure is becoming increasingly important in modern food preservation, its potential effects on microorganisms need to be thoroughly investigated. In this context, mild pressures (<200 MPa) have recently been shown to induce an SOS response in Escherichia coli MG1655. Due to this response, we observed a RecA- and LexA-dependent induction of lambda prophage upon treating E. coli lysogens with sublethal pressures. In this report, we extend this observation to lambdoid Shiga toxin (Stx)-converting bacteriophages in MG1655, which constitute an important virulence trait in Stx-producing E. coli strains (STEC). The window of pressures capable of inducing Stx phages correlated well with the window of bacterial survival. When pressure treatments were conducted in whole milk, which is known to promote bacterial survival, Stx phage induction could be observed at up to 250 MPa in E. coli MG1655 and at up to 300 MPa in a pressure-resistant mutant of this strain. In addition, we found that the intrinsic pressure resistance of two types of Stx phages was very different, with one type surviving relatively well treatments of up to 400 MPa for 15 min at 20°C. Interestingly, and in contrast to UV irradiation or mitomycin C treatment, pressure was not able to induce Stx prophage or an SOS response in several natural Stx-producing STEC isolates.     

Supercooling and vitrification of aqueous glycerol solutions at normal and high pressures

The supercooling and vitrification of aqueous glycerol solutions was studied at high pressures. Homogeneous ice nucleation temperatures (T(H)) were obtained for aqueous glycerol solutions of R=50, 30, 20, 12, and 10 (R: moles of water/moles of glycerol) up to 300MPa. The R=20 glycerol solution formed a glass above 200MPa at a cooling rate of 200°C/min, indicating that pressure enhances glass-formation of aqueous glycerol solutions. The (dT(g)/dP) values were obtained for vitrified aqueous glycerol solutions of R=3, 5, 10, and 20. These data can be used for the development of cryo-preservation liquids for living cells at high pressures.     

Effect of high pressure and pasteurization on Mycobacterium avium ssp. paratuberculosis in milk

AIMS: To determine the effect of high pressures alone and in conjunction with pasteurization on the viability of two strains of Mycobacterium avium ssp. paratuberculosis (Map). METHODS AND RESULTS: Map in a milk matrix was subjected to 400, 500 and 600 MPa with and without pasteurization (72 degrees C for 15 s) and plated onto Herrold's egg yolk medium (HEYM) and Middlebrook 7H10 (7H10) agar, both containing antibiotic supplements. Medium 7H10 was found to give a significantly (P < 0.001) better recovery than HEYM. A significantly greater (P < 0.001) reduction in viable numbers was observed using 500 MPa (mean log reduction of 6.52) compared with 400 MPa (mean log reduction of 2.56) and between 400 MPa and control (no applied pressure) for 10 min treatments. A treatment time of 10 min resulted in significantly (P < 0.001) fewer survivors than 5 min. Low numbers of survivors were still detected when pressure treatment at 400 and 600 MPa was combined with subsequent pasteurization. CONCLUSIONS: The use of high-pressure was effective in reducing viable numbers of Map but even when combined with pasteurization there were still survivors, albeit when high inoculum levels of Map were used. SIGNIFICANCE AND IMPACT OF THE STUDY: To the authors' knowledge the work reported here represents the first study of the efficacy of high-pressure treatments alone and in combination with pasteurization to kill Map. The results indicate that further research is warranted before more commercial-scale studies are commissioned.     

Inactivation of Escherichia coli and Listeria innocua in milk by combined treatment with high hydrostatic pressure and the lactoperoxidase system

We have studied inactivation of four strains each of Escherichia coli and Listeria innocua in milk by the combined use of high hydrostatic pressure and the lactoperoxidase-thiocyanate-hydrogen peroxide system as a potential mild food preservation method. The lactoperoxidase system alone exerted a bacteriostatic effect on both species for at least 24 h at room temperature, but none of the strains was inactivated. Upon high-pressure treatment in the presence of the lactoperoxidase system, different results were obtained for E. coli and L. innocua. For none of the E. coli strains did the lactoperoxidase system increase the inactivation compared to a treatment with high pressure alone. However, a strong synergistic interaction of both treatments was observed for L. innocua. Inactivation exceeding 7 decades was achieved for all strains with a mild treatment (400 MPa, 15 min, 20 degrees C), which in the absence of the lactoperoxidase system caused only 2 to 5 decades of inactivation depending on the strain. Milk as a substrate was found to have a considerable effect protecting E. coli and L. innocua against pressure inactivation and reducing the effectiveness of the lactoperoxidase system under pressure on L. innocua. Time course experiments showed that L. innocua counts continued to decrease in the first hours after pressure treatment in the presence of the lactoperoxidase system. E. coli counts remained constant for at least 24 h, except after treatment at the highest pressure level (600 MPa, 15 min, 20 degrees C), in which case, in the presence of the lactoperoxidase system, a transient decrease was observed, indicating sublethal injury rather than true inactivation.     

Response of pathogenic Vibrio species to high hydrostatic pressure.

Vibrio parahaemolyticus ATCC 17802, Vibrio vulnificus ATCC 27562, Vibrio cholerae O:1 ATCC 14035, Vibrio cholerae non-O:1 ATCC 14547, Vibrio hollisae ATCC 33564, and Vibrio mimicus ATCC 33653 were treated with 200 to 300 MPa for 5 to 15 min at 25 degrees C. High hydrostatic pressure inactivated all strains of pathogenic Vibrio without triggering a viable but nonculturable (VBNC) state; however, cells already existing in a VBNC state appeared to possess greater pressure resistance.     

Inactivation of a norovirus by high-pressure processing

Murine norovirus (strain MNV-1), a propagable norovirus, was evaluated for susceptibility to high-pressure processing. Experiments with virus stocks in Dulbecco's modified Eagle medium demonstrated that at room temperature (20 degrees C) the virus was inactivated over a pressure range of 350 to 450 MPa, with a 5-min, 450-MPa treatment being sufficient to inactivate 6.85 log(10) PFU of MNV-1. The inactivation of MNV-1 was enhanced when pressure was applied at an initial temperature of 5 degrees C; a 5-min pressure treatment of 350 MPa at 30 degrees C inactivated 1.15 log(10) PFU of virus, while the same treatment at 5 degrees C resulted in a reduction of 5.56 log(10) PFU. Evaluation of virus inactivation as a function of treatment times ranging from 0 to 150 s and 0 to 900 s at 5 degrees C and 20 degrees C, respectively, indicated that a decreasing rate of inactivation with time was consistent with Weibull or log-logistic inactivation kinetics. The inactivation of MNV-1 directly within oyster tissues was demonstrated; a 5-min, 400-MPa treatment at 5 degrees C was sufficient to inactivate 4.05 log(10) PFU. This work is the first demonstration that norovirus can be inactivated by high pressure and suggests good prospects for inactivation of nonpropagable human norovirus strains in foods.     

Effects of hydrostatic pressure on the ultrastructure and leakage of internal substances in the yeast Saccharomyces cerevisiae

The structural damage to and leakage of internal substances from Saccharomyces cerevisiae 0–39 cells induced by hydrostatic pressure were investigated. By scanning electron microscopy, yeast cells treated at room temperature with pressuresbellw 400 MPa for 10 min showed a slight alteration in outer shape. Transmission electron microscopy, however, showed that the inner structure of the cell began to be affected, especially the nuclear membrane, when treated with hydrostatic pressure around 100 MPa at room temperature for 10 min; at more than 400–600 MPa, further alterations appeared in the mitochondria and cytoplasm. Furthermore, when high pressure treatment was carried out at — 20° C, the inner structure of the cells was severely damaged even at 200 MPa, and almost all of the nuclear membrane disappeared, although the fluorescent nucleus in the cytoplasm was visible by 4,6-diamidino-2-phenylindole (DAPI) staining. The structural damage of pressure-treated cells was accompanied by the leakage of internal substances. The efflux of UV-absorbing substances including amino acid pools, peptides, and metal ions increased with increase in pressure up to 600 MPa. In particular, amounts of individual metal ion release varied with the magnitude of hydrostatic pressures over 300 MPa, which suggests that the ions can be removed from the yeast cells separately by hydrostatic pressure treatment. Correspondence to: S. Shimada     

Inactivation of Staphylococcus aureus in raw milk cheese by combinations of high-pressure treatments and bacteriocin-producing lactic acid bacteria

AIMS: To investigate the combined effect of high-pressure treatments (HPT) and milk inoculation with bacteriocin-producing lactic acid bacteria (BP-LAB) on the survival of Staphylococcus aureus during ripening of raw milk cheese. METHODS AND RESULTS: Cheeses were manufactured from raw milk artificially contaminated with S. aureus at ca 5 log CFU ml(-1), a commercial starter culture and one of seven strains of BP-LAB, added as adjuncts at 0.1%. HPT of cheeses were performed on days 2 or 50 at 300 MPa (10 degrees C, 10 min) or 500 MPa (10 degrees C, 5 min). On day 3, S. aureus counts were 6.46 log CFU g(-1) in control cheese. Milk inoculation with different BP-LAB lowered S. aureus counts on day 3 when compared with control cheese by up to 0.46 log CFU g(-1), HPT at 300 MPa on day 2 by 0.45 log CFU g(-1) and HPT at 500 MPa on day 2 by 2.43 log CFU g(-1). Combinations of BP-LAB with HPT at 300 and 500 MPa on day 2 lowered S. aureus counts on day 3 by up to 1.02 and 4.00 log CFU g(-1) respectively. CONCLUSIONS: The combined effect of milk inoculation with some of the BP-LAB tested and HPT of cheese on S. aureus inactivation was synergistic. SIGNIFICANCE AND IMPACT OF THE STUDY: The combination of HPT at lower pressures with BP-LAB inoculation is a feasible system to improve cheese safety in case of deleterious effects on cheese quality caused by HPT at higher pressures.