琼脂糖凝胶电泳中DNA回收方法的比较

实验采用直接切取琼脂糖凝胶,进行Lambda DNA/EcoRI HindIII Marker的回收,将其与试剂盒回收进行比较,并对比切下的凝胶立即回收和在-20℃冰冻数小时回收的效果,结果表明实验采用的方法与试剂盒的比较产量相当,且重复性好,达到了分子生物学实验的要求.尤其实验方法在大片段的回收(21226bp)平均回收率是43.5956%与试剂盒的回收率:38.9761%相比有明显的优势,非常适合大多数实验室使用.     

A rapid method for analyzing the ligation products of synthetic oligodeoxyribonucleotides

A method is described for the rapid analysis of DNA ligation products in the assembly of synthetic genes and gene fragments. The method is based on the simultaneous analysis of multiple ligation reactions where a single but different DNA oligomer is radiolabelled per ligation reaction. After each ligation the reaction mixture is electrophoresed on a denaturing, as well as a non-denaturing, polyacrylamide gel allowing one to monitor the ligation reaction products. In addition, a unique method for generating single stranded DNA sizing standards up to approximately 300 nucleotides in length is described.     

Quantitative electrophoretic transfer of DNA from polyacrylamide or agarose gels to nitrocellulose

A method for efficient electrophoretic transfer of DNA fragments from polyacrylamide gels to nitrocellulose sheets was developed. Hybridization to these fragments can be performed by standard techniques. The method is also applicable to agarose gels, allowing this transfer method to be used for DNA ranging from 40 to at least 23,000 bp.     

An agarose gel resolving a wide range of DNA fragment lengths

To resolve DNA fragments ranging from several kilobases to some tens of base pairs in length, an agarose slab gel of steadily increasing thickness has been designed. During electrophoresis a gradient of decreasing electric-field strength is generated throughout the gel from the cathode end to the anode end. Shorter fragments which migrate further are decelerated, resulting in an increased linearity of the relationship between mobility and molecular weight.     

An optimized freeze-squeeze method for the recovery of DNA fragments from agarose gels

A procedure for quick and simple elution of DNA from agarose gels is presented. After electrophoresis, bands of interest are cut out of the gel and the slices are equilibrated in a neutral salt buffer. The slices are then frozen and centrifuged through a filtration assembly whereby the DNA-containing buffer is squeezed out. The method is simple, quick, and suitable for the safe handling of small amounts of DNA (less than 1 microgram). The isolated DNA is susceptible to any enzymatic reaction and also to chemical sequencing. The method is most useful for rapid preparation of specifically end-labeled DNA fragments (e.g., for sequencing), but may also be utilized for any other preparative applications.     

Purification and cloning of DNA fragments fractionated on agarose gels

Purification of DNA fragments from acrylamide or agarose gels is a commonly used technique in the molecular biology laboratory. This article describes a rapid, efficient, and inexpensive method of purifying DNA fractions from an agarose gel. The purified DNA is suitable for use in a wide range of applications including ligation using DNA ligase. The procedure uses standard high-melting-temperature agarose and normal TBE electrophoresis buffer. In addition, the protocol does not involve the use of highly toxic organic solvents such as phenol.     

The improved method in agarose gel electrophoresis of nucleic acid

In most molecular experiments, nucleic acids are subjected to agarose gel electrophoresis to determine the size of the molecule. The addition of a nucleic acid dye allows the nucleic acid to be detected under the UV image system after running the gel, so the nucleic acid dye is an integral part of the electrophoresis experiment. But when considering the mutagenicity and toxicity of nucleic acid dyes, one must be careful to insure the proper disposal of experimental waste. In this article, a new usage of nucleic acid dye in agarose gel electrophoresis is described where the nucleic acid dyes were added to the loading buffer and nucleic acid marker buffer. The results show that this method has advantages as: a smaller amount of dye can be used, there is less time in contact with the dye, and its operation is easier and reduces toxicity damage. Also the bands showed a much clearer image, having a lower background value. The improved method shows better results with lower toxicity and is superior to the traditional method.     

Two-dimensional restriction mapping by digestion with restriction endonucleases of DNA in agarose and polyacrylamide gels

We have studied with a number of bacterial restriction enzymes the conditions for digestion of DNA in agarose and polyacrylamide gels. The restriction endonucleases HpaII, MspI, HaeIII, HindIII, TaqI, HhaI, AluI, BamHI, EcoRI and SalI are capable of digesting DNA in agarose gels of low electroendosmosis and low sulfate concentration. All enzymes, except BamHI, are also capable of digesting DNA in polyacrylamide gels. With this method, rapid two-dimensional restriction mapping of genomes with low and high sequence complexity is possible.     

A simple method for isolation of megabase DNA from cotton

A simple method for preparation of high-molecular-weight DNA from cotton was developed. This method includes two major steps, (i) isolating nuclei and (ii) embedding nuclei into agarose microbeads. DNA isolated by this procedure is larger than 5.7 Mb in size, and is suitable for physical mapping by PFGE and YAC/BAC cloning.     

A further fractionation of agarose

Hydrobiologia - Commercial agarose can be separated into two components by fractional precipitation using alcohols or glycols. The less soluble component has a much higher gel strength and lower...     

A simple method for isolation of high-molecular-weight DNA from Rhodotorula gracilis

Unsheared DNA has been isolated from Rhodotorula and Rhodosporidium yeasts using a cell-wall-digesting enzyme preparation from Paecilomyces lilacinus. Pulsed-field gel electrophoresis indicated that at least 11 chromosomes were present in Rhodot. gracilis ATCC 90950. The DNA was amenable to digestion with restriction enzymes.The authors are with the Department of Microbiology, Central Food Technological Research Institute, Mysore-570 013, India.     

Structure-independent and quantitative ligation of single-stranded DNA

Ligation of an adapter oligonucleotide to a single-stranded cDNA is central to many molecular biology techniques. Current single-stranded ligation approaches suffer from low efficiencies and are strongly inhibited by preexisting DNA secondary structure. We develop an approach for ligating low concentrations of single-stranded DNAs to a DNA adapter with near-quantitative efficiency, unaffected by secondary structure in the target DNA. This efficient DNA ligation reaction will facilitate development of robust procedures for quantifying small amounts of highly structured cDNAs and their RNA templates.     

Determination of melting temperature and temperature melting range for DNA with multi-peak differential melting curves

Many factors that change the temperature position and interval of the DNA helix–coil transition often also alter the shape of multi-peak differential melting curves (DMCs). For DNAs with a multi-peak DMC, there is no agreement on the most useful definition for the melting temperature, T_m, and temperature melting width, ΔT, of the entire DNA transition. Changes in T_m and ΔT can reflect unstable variation of the shape of the DMC as well as alterations in DNA thermal stability and heterogeneity. Here, experiments and computer modeling for DNA multi-peak DMCs varying under different factors allowed testing of several methods of defining T_m and ΔT. Indeed, some of the methods give unreasonable “jagged” T_m and ΔT dependences on varying relative concentration of DNA chemical modifications (r_b), [Na⁺], and GC content. At the same time, T_m determined as the helix–coil transition average temperature, and ΔT, which is proportional to the average absolute temperature deviation from this temperature, are suitable to characterize multi-peak DMCs. They give smoothly varying theoretical and experimental dependences of T_m and ΔT on r_b, [Na⁺], and GC content. For multi-peak DMCs, T_m value determined in this way is the closest to the thermodynamic melting temperature (the helix–coil transition enthalpy/entropy ratio).     

A method for generating user-defined circular single-stranded DNA from plasmid DNA using Golden Gate intramolecular ligation

Construction of user-defined long circular single stranded DNA (cssDNA) and linear single stranded DNA (lssDNA) is important for various biotechnological applications. Many current methods for synthesis of these ssDNA molecules do not scale to multikilobase constructs. Here we present a robust methodology for generating user-defined cssDNA employing Golden Gate assembly, a nickase, and exonuclease degradation. Our technique is demonstrated for three plasmids with insert sizes ranging from 2.1 to 3.4 kb, requires no specialized equipment, and can be accomplished in 5 h with a yield of 33%–43% of the theoretical. To produce lssDNA, we evaluated different CRISPR-Cas9 cleavage conditions and reported a 52 ± 8% cleavage efficiency of cssDNA. Thus, our current method does not compete with existing protocols for lssDNA generation. Nevertheless, our protocol can make long, user-defined cssDNA readily available to biotechnology researchers.     

On-line melting of double-stranded DNA for analysis of single-stranded DNA using capillary electrophoresis

Capillary electrophoresis (CE) is a convenient, fast and non-radioactive method with possibilities for automatization. To analyse single-stranded DNA molecules in a more automated way, we developed a heating device to melt double-stranded DNA fragments in the capillary during electrophoresis. In this study we used this device to obtain single-stranded DNA, necessary for the detection of point mutations in DNA using the single-strand conformation polymorphism technique. Results show that double-stranded DNA molecules can be melted on-line into single-stranded DNA molecules, although not for 100%. In an attempt to find universal electrophoretic conditions for the analysis of single-stranded DNA, we investigated the influence of several parameters on the yield of single-stranded DNA molecules and on the resolution of the single-stranded DNA peaks. We demonstrate that this heating device is a technical adjustment of CE which contributes to more automated analyses of DNA fragments.     

从琼脂糖电泳凝胶中回收DNA的几种简便方法

介绍两类从普通琼脂糖电泳凝胶中回收ＤＮＡ的简便、快捷、高效且廉价的方法．第一类为电泳洗脱法．方法ａ：利用１．５ｍＬ微量离心管、ｌｍＬ吸头、尼龙网膜和透析膜做成的一个小装置,快速有效回ＤＮＡ,最终回收率为７０％左右．方法ｂ：不用ＤＥＡＥ－纤维素膜,而用透析膜在凝胶中作出横隔挡在ＤＮＡ条带前,最终回收率为５０％左右;第二类为冰冻融解法,最终回收率也在５０％左右．如果联合使用冰冻融解法和电泳洗脱法,回收率可进一步提高至９０％．     

Hybridization of DNA to RNA in methylmercuric hydroxide agarose gels

We describe a method for hybridization of cDNA probes to RNA directly in agarose gels which provides a practical alternative to methods involving transfer of the RNA out of the gel. Total cellular RNA is subjected to electrophoresis in agarose gels containing methylmercuric hydroxide as the denaturing agent. After removal of the methylmercuric hydroxide, the gel is dried and 32P-labeled DNA probes are hybridized to the immobilized RNA. This method is more economical in time and expense than methods involving transfer of the RNA out of the gel, while maintaining a level of sensitivity comparable to other procedures.