The influence of saliva on the hydrophobic surface properties of bacteria isolated from oral sites of macaque monkeys

Abstract The surface hydrophobicity of 64 bacterial strains isolated from discrete, intra-oral sites of monkeys ( Macaca fascicularis ) was determined by measuring their affinity for hexadecane. Bacteria were also exposed to monkey saliva which either increased or reduced the surface hydrophobicity of the cells. After exposure to saliva those bacteria isolated solely from the mucosal surfaces were significantly more hydrophobic than bacteria ( Streptococcus mutans and Actinomyces spp.) whose major habitat was the dentition. Streptococcus sanguis strains isolated from all intra-oral sites and among the early plaque formers were as hydrophobic as the organisms isolated only from the mucosal surfaces.     

The conditioning role of saliva in streptococcal attachment to hydroxyapatite surfaces

The solution properties of saliva and its role in conditioning both the substrate and the bacterial surface have been investigated with regard to the attachment of oral streptococci to hydroxyapatite surfaces. Saliva from eight subjects was used and the attachment of three organisms, Streptococcus mutans strains FA-1 (serotype b) and KPSK2 (serotype c) and S. sanguis T175-1, was studied. An adsorbed salivary layer on a hydroxyapatite surface substantially reduced the affinity of the organisms for the surface. Adsorbed saliva on the bacterial surfaces, however, tended to increase the organisms' affinity for saliva-coated apatite. The source of saliva was important in determining the extent of inhibition of attachment. The data indicated that the negatively charged and hydrophilic nature of salivary conditioning films was important in controlling bacterial adsorption to hydroxyapatite. The results also suggested that hydrophobic salivas could promote binding of the more hydrophobic bacteria known to be early colonizers of the teeth.     

A comparison of five methods for assaying bacterial hydrophobicity

Five methods for assaying bacterial surface hydrophobicity, namely, bacterial adherence to hydrocarbons, salt aggregation, hydrophobic interaction chromatography, adhesion to polystyrene and latex particle agglutination were used to compare the hydrophobic surface properties of Escherichia coli, Acinetobacter calcoaceticus, Staphylococcus aureus and Streptococcus mitis. Two strains of A. calcoaceticus, including RAG-1, gave strong positive results by all five methods. S. mitis gave weak or negative results by all methods. The results for the other bacteria varied with the method. We conclude that reliance on one method for such tests is inadequate.     

Comparison of culture media and chairside assays for enumerating mutans streptococci

AIM: This study compared several traditional culture-based media and chairside cultural assays for ability to recover mutans streptococci (MS) from pure cultures and from saliva samples. METHODS AND RESULTS: When pure cultures were used with traditional culture-based media, mitis-salivarius bacitracin (MSB) agar demonstrated less support for bacterial recovery than trypticase-yeast extract-cysteine sucrose-bacitracin (TYCSB) agar and the modified medium of Ritz (HLR-S). One species of MS, Streptococcus ferus (c), was not recovered on MSB medium. Chairside cultural tests displayed considerable disparity between tests in recovering bacteria from pure cultures. On the glass adherence assay (Mucount), S. ferus was not detected and Streptococcus criceti was not detected on the dipslide assay (Cariescreen SM) or on the plastic adherence assay (Dentocult SM Strip mutans). The frequency of isolation of pure strains of bacteria other than MS was common. From saliva samples, the frequency of isolation of MS on HLR-S and TYCSB media and the glass adherence assay was 91-97%. The frequency of isolation on MSB medium and on the dip-slide and plastic adherence assays was significantly decreased (37, 47 and 69%, respectively). Recovery scores varied considerably among the culture methods studied and tended to be highest on the HLR-S medium and on the glass adherence assay. CONCLUSIONS: Growth and recovery profiles of pure bacterial cultures and of saliva samples for the MS varied according to different media. SIGNIFICANCE AND IMPACT OF THE STUDY: Caution should be exercised in comparing results between studies that employ different cultural methods for MS enumeration.     

An in vitro method to study the adherence of oral bacteria to HeLa cells

Exfoliated buccal epithelial cells have been widely used in microbial adherence studies, but present a number of problems due to their variable nature and to contamination with indigenous bacteria. An adherence assay was developed using HeLa cell monolayers which were washed with buffer, or treated with saliva or serum to mimic buccal or crevicular epithelial cells, respectively. A total of eighteen strains of oral bacteria tested showed a low affinity for untreated HeLa cells, but most strains adhered in high numbers to saliva treated HeLa cells. A few strains, usually present in the gingival crevice, demonstrated a high affinity for serum treated HeLa cells. Thus, salivary and crevicular fluid components appear to be specifically implicated in the selective adherence and colonization of bacteria on oral surfaces.     

Alterations in surface hydrophobicity ofAcinetobacter baumannii induced by meropenem

Six strains ofAcinetobacter baumannii out of eleven strains tested revealed a strong hydrophobic character. This was demonstrated by adherence of bacteria to xylene in the range of 90–94%. Changes in surface hydrophobicity of these strains were studied after treatment with meropenem at subinhibitory concentrations (sub-MICs) (1/4, 1/8, 1/16 or 1/32 of the MICs). All strains showed a reduced adherence to xylene after the action of meropenem at 1/4 or 1/16 of the MICs. Hydrophobicity of the treated bacteria was decreased to 1.3–70% (1/16 of the MICs) or to 12–86% (1/4 of the MICs), depending on the strain. A decrease in surface hydrophobicity of three strains was also observed after their exposure to meropenem at 1/8 of the MICs (to 18–71% of the control values). Meropenem at 1/32 of the MICs practically did not affect bacterial hydrophobic properties, with the exception of one strain.     

The hydrophobicity of Streptococcus salivarius strain HB and mutants deficient in adhesion to saliva-coated hydroxyapatite

The hydrophobicity and adhesion to saliva-coated hydroxyapatite of Streptococcus salivarius HB and the mutants HB7, HBV5 and HBV51 were measured. The mutants HB7 and HBV51 showed a significant reduction in adhesion to salivacoated hydroxyapatite and hydrophobicity compared with the mutant HBV5 and the parent strain. This supports the view that hydrophobic interactions are important for bacterial attachment in the oral cavity and is in contrast to previous studies on the hydrophobicity of these strains.     

Bacterial adherence to polystyrene: a replica method of screening for bacterial hydrophobicity.

A simple replica method is described for the rapid identification of colonies of bacteria which adhere to polystyrene. A correlation was found between the adherence of bacterial strains to polystyrene and cell surface hydrophobicity, suggesting the use of this technique in screening for cell surface mutants and in the isolation of hydrophobic bacteria from nature.     

Effects of Hydrophobic and Electrostatic Cell Surface Properties of Bacteria on Feeding Rates of Heterotrophic Nanoflagellates

The influence of cell surface hydrophobicity and electrostatic charge of bacteria on grazing rates of three common species of interception-feeding nanoflagellates was examined. The hydrophobicity of bacteria isolated from freshwater plankton was assessed by using two different methods (bacterial adhesion to hydrocarbon and hydrophobic interaction chromatography). The electrostatic charge of the cell surface (measured as zeta potential) was analyzed by microelectrophoresis. Bacterial ingestion rates were determined by enumerating bacteria in food vacuoles by immunofluorescence labelling via strain-specific antibodies. Feeding rates varied about twofold for each flagellate species but showed no significant dependence on prey hydrophobicity or surface charge. Further evidence was provided by an experiment involving flagellate grazing on complex bacterial communities in a two-stage continuous culture system. The hydrophobicity values of bacteria that survived protozoan grazing were variable, but the bacteria did not tend to become more hydrophilic. We concluded that variability in bacterial cell hydrophobicity and variability in surface charge do not severely affect uptake rates of suspended bacteria or food selection by interception-feeding flagellates.     

Effects of hydrophobic and electrostatic cell surface properties of bacteria on feeding rates of heterotrophic nanoflagellates

The influence of cell surface hydrophobicity and electrostatic charge of bacteria on grazing rates of three common species of interception-feeding nanoflagellates was examined. The hydrophobicity of bacteria isolated from freshwater plankton was assessed by using two different methods (bacterial adhesion to hydrocarbon and hydrophobic interaction chromatography). The electrostatic charge of the cell surface (measured as zeta potential) was analyzed by microelectrophoresis. Bacterial ingestion rates were determined by enumerating bacteria in food vacuoles by immunofluorescence labelling via strain-specific antibodies. Feeding rates varied about twofold for each flagellate species but showed no significant dependence on prey hydrophobicity or surface charge. Further evidence was provided by an experiment involving flagellate grazing on complex bacterial communities in a two-stage continuous culture system. The hydrophobicity values of bacteria that survived protozoan grazing were variable, but the bacteria did not tend to become more hydrophilic. We concluded that variability in bacterial cell hydrophobicity and variability in surface charge do not severely affect uptake rates of suspended bacteria or food selection by interception-feeding flagellates.     

Surface hydrophobicity of "rheumatogenic" and "nephritogenic" strains of group A streptococci and the ultrastructural surface feature of pharyngeal cells exposed to group A streptococci.

The present study was carried out to determine the surface hydrophobicity of group A streptococcal strains responsible for rheumatic fever (RF), "rheumatogenic" strains (RG strains) and strains causing glomerulonephritis, "nephritogenic" strains (NG strains) in relation to their adhesion to human pharyngeal cells. Scanning electronmicroscopic (SEM) studies were carried out to the difference, if any, in the adherence of group A streptococci (M type 5) to pharyngeal and buccal cells (PEC and BEC). By employing two techniques for hydrophobicity determination, salt aggregation titre (SAT) and n-hexadecane binding technique, it was observed that RG strains (M5, M1 and M6) were more hydrophobic than NG strain, M49. However, NG strain M12 was almost equally as hydrophobic as RG strains. The adherence of RG strains, except M1 and M24, to PEC was greater in number than that of NG strains. Although M1 strain was hydrophobic, its adherence to PEC was less. Pepsin and trypsin treatment with streptococci reduced the hydrophobicity and adherence of RG and NG strains to PEC. SEM studies revealed firmly adhered indigenous bacteria on PEC and BEC. Streptococci (M5) adhered more to PEC than to BEC. SEM studies also showed that PEC had a peculiar ultrastructural surface feature to which streptococci adhered. These findings suggest that streptococcal hydrophobicity alone does not determine their adhesion to PEC. The surface nature of PEC might be a characteristic feature of the epithelial cells that allows streptococci to adhere and colonize or it might be a consequence of streptococcal adhesion.     

Refinement of an adherence assay for the measurement of bacterial attachment to silica beads

An in vitro adherence assay [4] which utilised radiolabelled bacteria and silica beads was used to investigate firm and loose attachment of bacteria. A systematic evaluation of the effects of the assay conditions, including incubation vessel, bacteria to bead interaction, bead washing and bead weight, was carried out in an attempt to improve the reproducibility of adherence measurements. Four oral streptococcal strains (S. mutans NCTC 10449, S. sanguis NCTC 7863 and 10904, S. salivarius NCTC 8618) were studied with saliva coated and uncoated silica beads.Using the improved system, total bacterial adherence to uncoated beads was high (45–60% of bacteria present). While saliva coating of beads reduced total and firm adherence of all strains, these reductions were less marked (P > 0.005) for S. sanguis NCTC 10904.     

Selective isolation of bacteria from soil with hydrophobic materials

Bacterial strains having a hydrophobic cell surface have often been considered as degraders of hydrophobic organic pollutants in soil. In this study, bacterial strains were isolated using hydrophobic materials from 12 soil samples, and their cell surface hydrophobicity was determined by evaluating their adherence to n-hexane. Bacterial strains isolated using polytetrafluoroethylene (PTFE) membrane were more hydrophobic on an average than those isolated with styrene–divinylbenzene (DVB) particles or octadecylsilyl silica gel (ODS) particles. Strains closely related to Burkholderia cepacia could be selectively isolated using the PTFE membrane; those closely related to Ralstonia pickettii, using ODS and DVB particles; and those closely related to B. fungorum, using DVB. These results indicate that bacterial strains having a hydrophobic cell surface or within certain phyla can be selectively isolated from soils using hydrophobic materials, and that this isolation method would be useful for collecting candidates for bioremediation of hydrophobic pollutants.     

Fluorescence-based bacterial overlay method for simultaneous in situ quantification of surface-attached bacteria

For quantification of bacterial adherence to biomaterial surfaces or to other surfaces prone to biofouling, there is a need for methods that allow a comparative analysis of small material specimens. A new method for quantification of surface-attached biotinylated bacteria was established by in situ detection with fluorescence-labeled avidin-D. This method was evaluated utilizing a silicon wafer model system to monitor the influences of surface wettability and roughness on bacterial adhesion. Furthermore, the effects of protein preadsorption from serum, saliva, human serum albumin, and fibronectin were investigated. Streptococcus gordonii, Streptococcus mitis, and Staphylococcus aureus were chosen as model organisms because of their differing adhesion properties and their clinical relevance. To verify the results obtained by this new technique, scanning electron microscopy and agar replica plating were employed. Oxidized and poly(ethylene glycol)-modified silicon wafers were found to be more resistant to bacterial adhesion than wafers coated with hydrocarbon and fluorocarbon moieties. Roughening of the chemically modified surfaces resulted in an overall increase in bacterial attachment. Preadsorption of proteins affected bacterial adherence but did not fully abolish the influence of the original surface chemistry. However, in certain instances, mostly with saliva or serum, masking of the underlying surface chemistry became evident. The new bacterial overlay method allowed a reliable quantification of surface-attached bacteria and could hence be employed for measuring bacterial adherence on material specimens in a variety of applications.     

Cell-surface hydrophobicity of adherent oral bacteria

Adherent bacteria were released from the surfaces of four freshly extracted teeth by mild sonic oscillation, and screened for cell-surface hydrophobicity on the basis of their ability to adhere to hexadecane. Of the 103 tooth isolates examined, 82 adhered to the test hydrocarbon. Hydrophobic bacteria could similarly be isolated from the stainless steel dental matrix bands following brief incubation in the mouth of a volunteer; 30 of 52 isolates examined adhered to hexadecane. Among those strains which adhered to hexadecane, streptococci were the most frequent type isolated. Various other morphological types were also observed, including cocci, bacilli, coryneforms, and filamentous bacteria. The high overall proportion of hydrophobic bacteria found in this study (72%) suggests that cell-surface hydrophobicity may play a role in adherence of certain oral species to the tooth surface.     

Fluorescence-Based Bacterial Overlay Method for Simultaneous In Situ Quantification of Surface-Attached Bacteria

For quantification of bacterial adherence to biomaterial surfaces or to other surfaces prone to biofouling, there is a need for methods that allow a comparative analysis of small material specimens. A new method for quantification of surface-attached biotinylated bacteria was established by in situ detection with fluorescence-labeled avidin-D. This method was evaluated utilizing a silicon wafer model system to monitor the influences of surface wettability and roughness on bacterial adhesion. Furthermore, the effects of protein preadsorption from serum, saliva, human serum albumin, and fibronectin were investigated. Streptococcus gordonii, Streptococcus mitis, and Staphylococcus aureus were chosen as model organisms because of their differing adhesion properties and their clinical relevance. To verify the results obtained by this new technique, scanning electron microscopy and agar replica plating were employed. Oxidized and poly(ethylene glycol)-modified silicon wafers were found to be more resistant to bacterial adhesion than wafers coated with hydrocarbon and fluorocarbon moieties. Roughening of the chemically modified surfaces resulted in an overall increase in bacterial attachment. Preadsorption of proteins affected bacterial adherence but did not fully abolish the influence of the original surface chemistry. However, in certain instances, mostly with saliva or serum, masking of the underlying surface chemistry became evident. The new bacterial overlay method allowed a reliable quantification of surface-attached bacteria and could hence be employed for measuring bacterial adherence on material specimens in a variety of applications.     

Growth of oral Streptococcus species and Actinomyces viscosus in human saliva.

Microorganisms in dental plaque live in constant association with saliva. The role of saliva in the adherence of bacteria to the teeth and the antibacterial properties of saliva have been well investigated; less interest has been shown in the possible role of saliva as a substrate for oral microorganisms. In this study it was shown that saliva can serve as a growth medium for oral Streptococcus spp. and Actinomyces viscosus. The cell production of these organisms on saliva was carbohydrate limited. The doubling times for growth on glucose-supplemented saliva (4 to 5 mmol/liter) ranged from 1.6 to 4.0 h. The availability of carbohydrate sources for the oral microflora is discussed in relation to microbial growth in the oral cavity.     

Role and behaviour of the hydrophobic conditions in bacterial adhesion to incurrent siphon in a bivalve mollusc

Surface hydrophobicity is a widely distributed characteristic among human bacterial pathogens playing an important role in microbes retention by the incurrent siphon of a marine bivalve. Feeding retention experiments with the bivalve Mesodesma donacium was done with hydrophobic strains alone (Staphylococcus aureus, Salmonella paratyphi, Vibrio cholerae) or with mixed cultures using a hydrophilic strain (Aeromonas hydrophila). Results showed that hydrophobic bacteria are retained in greater numbers than hydrophilic bacteria. This difference is statistically significant. Hydrophobic strains also survive longer than hydrophilic ones in sea water. Surface hydrophobicity is to be considered as a factor influencing concentration of hydrophobic pathogens by filter feeding molluscs.     

Hydrophobicity of Bacillus and Clostridium spores

The hydrophobicities of spores and vegetative cells of several species of the genera Bacillus and Clostridium were measured by using the bacterial adherence to hexadecane assay and hydrophobic interaction chromatography. Although spore hydrophobicity varied among species and strains, the spores of each organism were more hydrophobic than the vegetative cells. The relative hydrophobicities determined by the two methods generally agreed. Sporulation media and conditions appeared to have little effect on spore hydrophobicity. However, exposure of spore suspensions to heat treatment caused a considerable increase in spore hydrophobicity. The hydrophobic nature of Bacillus and Clostridium spores suggests that hydrophobic interactions may play a role in the adhesion of these spores to surfaces.     

Hydrophobicity of Bacillus and Clostridium spores.

The hydrophobicities of spores and vegetative cells of several species of the genera Bacillus and Clostridium were measured by using the bacterial adherence to hexadecane assay and hydrophobic interaction chromatography. Although spore hydrophobicity varied among species and strains, the spores of each organism were more hydrophobic than the vegetative cells. The relative hydrophobicities determined by the two methods generally agreed. Sporulation media and conditions appeared to have little effect on spore hydrophobicity. However, exposure of spore suspensions to heat treatment caused a considerable increase in spore hydrophobicity. The hydrophobic nature of Bacillus and Clostridium spores suggests that hydrophobic interactions may play a role in the adhesion of these spores to surfaces.