Nanoscale engineering of biomimetic surfaces: cues from the extracellular matrix

The ultimate goal in the design of biomimetic materials for use in tissue engineering as permanent or resorbable tissue implants is to generate biocompatible scaffolds with appropriate biomechanical and chemical properties to allow the adhesion, ingrowth, and survival of cells. Recent efforts have therefore focused on the construction and modification of biomimetic surfaces targeted to support tissue-specific cell functions including adhesion, growth, differentiation, motility, and the expression of tissue-specific genes. Four decades of extensive research on the structure and biological influence of the extracellular matrix (ECM) on cell behavior and cell fate have shown that three types of information from the ECM are relevant for the design of biomimetic surfaces: (1) physical properties (elasticity, stiffness, resilience of the cellular environment), (2) specific chemical signals from peptide epitopes contained in a wide variety of extracelluar matrix molecules, and (3) the nanoscale topography of microenvironmental adhesive sites. Initial physical and chemical approaches aimed at improving the adhesiveness of biomaterial surfaces by sandblasting, particle coating, or etching have been supplemented by attempts to increase the bioactivity of biomaterials by coating them with ECM macromolecules, such as fibronectin, elastin, laminin, and collagens, or their integrin-binding epitopes including RGD, YIGSR, and GFOGER. Recently, the development of new nanotechnologies such as photo- or electron-beam nanolithography, polymer demixing, nano-imprinting, compression molding, or the generation of TiO₂ nanotubes of defined diameters (15–200 nm), has opened up the possibility of constructing biomimetic surfaces with a defined nanopattern, eliciting tissue-specific cellular responses by stimulating integrin clustering. This development has provided new input into the design of novel biomaterials. The new technologies allowing the construction of a geometrically defined microenvironment for cells at the nanoscale should facilitate the investigation of nanotopography-dependent mechanisms of integrin-mediated cell signaling.     

Cellular responses to extracellular guidance cues

Extracellular guidance cues have a key role in orchestrating cell behaviour. They can take many forms, including soluble and cell‐bound ligands (proteins, lipids, peptides or small molecules) and insoluble matrix substrates, but to act as guidance cues, they must be presented to the cell in a spatially restricted manner. Cells that recognize such cues respond by activating intracellular signal transduction pathways in a spatially restricted manner and convert the extracellular information into intracellular polarity. Although extracellular cues influence a broad range of cell polarity decisions, such as mitotic spindle orientation during asymmetric cell division, or the establishment of apical–basal polarity in epithelia, this review will focus specifically on guidance cues that promote cell migration (chemotaxis), or localized cell shape changes (chemotropism).     

LKB1 loss in melanoma disrupts directional migration toward extracellular matrix cues

Somatic inactivation of the serine/threonine kinase gene STK11/LKB1/PAR-4 occurs in a variety of cancers, including ∼10% of melanoma. However, how the loss of LKB1 activity facilitates melanoma invasion and metastasis remains poorly understood. In LKB1-null cells derived from an autochthonous murine model of melanoma with activated Kras and Lkb1 loss and matched reconstituted controls, we have investigated the mechanism by which LKB1 loss increases melanoma invasive motility. Using a microfluidic gradient chamber system and time-lapse microscopy, in this paper, we uncover a new function for LKB1 as a directional migration sensor of gradients of extracellular matrix (haptotaxis) but not soluble growth factor cues (chemotaxis). Systematic perturbation of known LKB1 effectors demonstrated that this response does not require canonical adenosine monophosphate–activated protein kinase (AMPK) activity but instead requires the activity of the AMPK-related microtubule affinity-regulating kinase (MARK)/PAR-1 family kinases. Inhibition of the LKB1–MARK pathway facilitated invasive motility, suggesting that loss of the ability to sense inhibitory matrix cues may promote melanoma invasion.     

Two distinct filopodia populations at the growth cone allow to sense nanotopographical extracellular matrix cues to guide neurite outgrowth

Background

The process of neurite outgrowth is the initial step in producing the neuronal processes that wire the brain. Current models about neurite outgrowth have been derived from classic two-dimensional (2D) cell culture systems, which do not recapitulate the topographical cues that are present in the extracellular matrix (ECM) in vivo. Here, we explore how ECM nanotopography influences neurite outgrowth.

Methodology/Principal Findings

We show that, when the ECM protein laminin is presented on a line pattern with nanometric size features, it leads to orientation of neurite outgrowth along the line pattern. This is also coupled with a robust increase in neurite length. The sensing mechanism that allows neurite orientation occurs through a highly stereotypical growth cone behavior involving two filopodia populations. Non-aligned filopodia on the distal part of the growth cone scan the pattern in a lateral back and forth motion and are highly unstable. Filopodia at the growth cone tip align with the line substrate, are stabilized by an F-actin rich cytoskeleton and enable steady neurite extension. This stabilization event most likely occurs by integration of signals emanating from non-aligned and aligned filopodia which sense different extent of adhesion surface on the line pattern. In contrast, on the 2D substrate only unstable filopodia are observed at the growth cone, leading to frequent neurite collapse events and less efficient outgrowth.

Conclusions/Significance

We propose that a constant crosstalk between both filopodia populations allows stochastic sensing of nanotopographical ECM cues, leading to oriented and steady neurite outgrowth. Our work provides insight in how neuronal growth cones can sense geometric ECM cues. This has not been accessible previously using routine 2D culture systems.     

Simulation of extracellular matrix remodeling by fibroblast cells in soft three-dimensional bioresorbable scaffolds

To culture functional soft tissues and organs in three-dimensional scaffolds, it is essential to elucidate the optimal scaffold mechanical properties. However, mechanoregulated soft tissue remodeling is not well understood. In this study, we hypothesized that individual cells are capable of remodeling extracellular matrix within a short proximity of themselves in order to match the stiffness of the broader surrounding matrix. This theory was implemented in a three-dimensional finite element model to simulate soft tissue remodeling of human fibroblast cells in two collagen–chitosan scaffolds with different mechanical properties. Simulation results closely matched with previously reported experimental data, showing that soft tissue growth in compliant (Scaf-A, 4.30 kPa) and stiff (Scaf-B, 17.03 kPa) scaffolds led to an almost eightfold difference in the resulting stiffnesses after 10 days (8.40 kPa for Scaf-A, 59.25 kPa for Scaf-B). Furthermore, varying the simulated rate for tissue remodeling by \(\pm \)50 % caused unequal changes in the resulting stiffness (+3.6 and \(-\)23 % for Scaf-A, +5 and \(-\)17 % for Scaf-B), and \(\pm \)50 % changes in the assumed upper limit on tissue stiffness only had larger effects on the stiff scaffold (+42 and \(-\)44 % for Scaf-B). These results reinforce the notion that soft tissue remodeling is governed by the stiffness of the surrounding matrix, until meeting an upper limit on tissue stiffness.     

Matrilin-3 switches from anti- to pro-anabolic upon integration to the extracellular matrix

The extracellular matrix (ECM) has long been viewed primarily as an organized network of solid-phase ligands for integrin receptors. During degenerative processes, such as osteoarthritis, the ECM undergoes deterioration, resulting in its remodeling and in the release of some of its components. Matrilin-3 (MATN3) is an almost cartilage specific, pericellular protein acting in the assembly of the ECM of chondrocytes. In the past, MATN3 was found required for cartilage homeostasis, but also involved in osteoarthritis-related pro-catabolic functions. Here, to better understand the pathological and physiological functions of MATN3, its concentration as a circulating protein in articular fluids of human osteoarthritic patients was determined and its functions as a recombinant protein produced in human cells were investigated with particular emphasis on the physical state under which it is presented to chondrocytes. MATN3 down-regulated cartilage extracellular matrix (ECM) synthesis and up-regulated catabolism when administered as a soluble protein. When artificially immobilized, however, MATN3 induced chondrocyte adhesion via a α5β1 integrin-dependent mechanism, AKT activation and favored survival and ECM synthesis. Furthermore, MATN3 bound directly to isolated α5β1 integrin in vitro. TGFβ1 stimulation of chondrocytes allowed integration of exogenous MATN3 into their ECM and ECM-integrated MATN3 induced AKT phosphorylation and improved ECM synthesis and accumulation. In conclusion, the integration of MATN3 to the pericellular matrix of chondrocytes critically determines the direction toward which MATN3 regulates cartilage metabolism. These data explain how MATN3 plays either beneficial or detrimental functions in cartilage and highlight the important role played by the physical state of ECM molecules.     

Prediction of extracellular matrix stiffness in engineered heart valve tissues based on nonwoven scaffolds

The in vitro development of tissue engineered heart valves (TEHV) exhibiting appropriate structural and mechanical characteristics remains a significant challenge. An important step yet to be addressed is establishing the relationship between scaffold and extracellular matrix (ECM) mechanical properties. In the present study, a composite beam model accounting for nonwoven scaffold-ECM coupling and the transmural collagen concentration distribution was developed, and utilized to retrospectively estimate the ECM effective stiffness in TEHV specimens incubated under static and cyclic flexure conditions (Engelmayr Jr et~al. in Biomaterials 26(2):175-187 2005). The ECM effective stiffness was expressed as the product of the local collagen concentration and the collagen specific stiffness (i.e., stiffness/concentration), and was related to the overall TEHV effective stiffness via an empirically determined scaffold-ECM coupling parameter and measured transmural collagen concentration distributions. The scaffold-ECM coupling parameter was determined by flexural mechanical testing of polyacrylamide gels (i.e., ECM analogs) of variable stiffness and associated scaffold-polyacrylamide gel composites (i.e., engineered tissue analogs). The transmural collagen concentration distributions were quantified from fluorescence micrographs of picro-sirius red stained TEHV sections. As suggested by a previous structural model of the nonwoven scaffold (Engelmayr Jr and Sacks in J Biomech Eng 128(4):610-622, 2006), nonwoven scaffold-ECM composites did not follow a traditional rule of mixtures. The present study provided further evidence that the primary mode of reinforcement in nonwoven scaffold-ECM composites is an increase in the number fiber-fiber bonds with a concomitant increase in the effective stiffness of the spring-like fiber segments. Simulations of potential ECM deposition scenarios using the current model indicated that the present approach is sensitive to the specific time course of tissue deposition, and is thus very suitable for studies of ECM formation in engineered heart valve tissues.     

Targeting angiogenesis with compounds from the extracellular matrix

The extracellular matrix (ECM) is the central element of a pericellular network of bioactive molecules. It orchestrates molecular interactions, availability and activity, acting as a key regulator of cell functions and complex biological processes, including physiological and pathological angiogenesis. The ECM serves as a source of both stimulatory and inhibitory angiogenesis regulatory factors. The observation that several endogenous inhibitors of angiogenesis derive from the ECM proves its importance in physiological angiogenesis, and point to the ECM as a precious source of therapeutic agents for angiogenesis-driven diseases, including cancer growth and metastatic dissemination. This review focuses on the different approaches to exploit ECM molecules for designing tools for therapeutic inhibition or monitoring of pathological angiogenesis, with particular focus on antineoplastic therapy, and emphasis on peptides of ECM moieties and mimetic small molecules.     

Artificial extracellular matrix scaffolds of mobile molecules enhance maturation of human stem cell-derived neurons

1. Download : Download high-res image (218KB)
2. Download : Download full-size image

     

Strain gradient development in 3-dimensional extracellular matrix scaffolds during in vitro mechanical stimulation

This study analyzed strain variations in 3D ECM scaffolds using a membrane-adherent model (MM) and a direct elongation model (DM). Computational models were solved for target strains from 1 to 10% at varied scaffold thicknesses and intra-scaffold slices. DM strain profiles were uniform within the scaffold and independent of thickness. However, a wide range of strains developed with substantial volume experiencing significantly off-target strain. MM strain profiles varied throughout the scaffold, exhibiting significantly reduced average strain with increasing thickness. These findings are important for tissue engineering studies since biological responses are commonly attributed to a single strain level that only partially describes the mechanical condition, making it difficult to develop precise causal relationships. Spatial strain variations and reduced average strain may warrant targeted sampling for cell response and should be taken into consideration by investigators using large-volume 3D scaffolds when engineering mechanically sensitive tissues.     

Binding of plasminogen to extracellular matrix

We have previously demonstrated that plasminogen immobilized on various surfaces forms a substrate for efficient conversion to plasmin by tissue plasminogen activator (t-PA) (Silverstein, R. L., Nachman, R. L., Leung, L. L. K., and Harpel, R. C. (1985) J. Biol. Chem. 260, 10346-10352). We now report the binding of human plasminogen to the extracellular matrix synthesized in vitro by cultured endothelial cell monolayers. The binding was specific, saturable at plasma plasminogen concentrations, reversible, and lysine-binding site-dependent. Functional studies demonstrated that matrix immobilized plasminogen was a much better substrate for t-PA than was fluid phase plasminogen as shown by a 100-fold decrease in Km. Activation of plasminogen by t-PA and urokinase on the matrix was equally efficient. The plasmin generated on the matrix, in marked contrast to fluid phase, was protected from its fast-acting inhibitor, alpha 2-plasmin inhibitor. Matrix-associated plasmin converted bound Glu- into Lys-plasminogen, which in turn is more rapidly activated to plasmin by t-PA. The extracellular matrix not only binds and localizes plasminogen but also improves plasminogen activation kinetics and prolongs plasmin activity in the subendothelial microenvironment.     

Arp2/3 is critical for lamellipodia and response to extracellular matrix cues but is dispensable for chemotaxis

Lamellipodia are sheet-like, leading edge protrusions in firmly adherent cells that contain Arp2/3-generated dendritic actin networks. Although lamellipodia are widely believed to be critical for directional cell motility, this notion has not been rigorously tested. Using fibroblasts derived from Ink4a/Arf-deficient mice, we generated a stable line depleted of Arp2/3 complex that lacks lamellipodia. This line shows defective random cell motility and relies on a filopodia-based protrusion system. Utilizing a microfluidic gradient generation system, we tested the role of Arp2/3 complex and lamellipodia in directional cell migration. Surprisingly, Arp2/3-depleted cells respond normally to shallow gradients of PDGF, indicating that lamellipodia are not required for fibroblast chemotaxis. Conversely, these cells cannot respond to a surface-bound gradient of extracellular matrix (haptotaxis). Consistent with this finding, cells depleted of Arp2/3 fail to globally align focal adhesions, suggesting that one principle function of lamellipodia is to organize cell-matrix adhesions in a spatially coherent manner.     

Numb links extracellular cues to intracellular polarity machinery to promote chemotaxis

Cell polarization is essential throughout development for proliferation, migration, and differentiation. However, it is not known how extracellular cues correctly orient cell polarity at distinct stages of development. Here, we show that the endocytic adaptor protein Numb, previously characterized for its role in cell proliferation, subsequently plays an important role in cell migration. In neural precursors stimulated with the chemotactic factor BDNF, Numb binds to activated TrkB, the BDNF receptor, and functions both as an endocytic regulator for TrkB and as a scaffold for aPKC (aPKC). Thus, Numb promotes BDNF-dependent aPKC activation. Interestingly, Numb is also a substrate of aPKC. When phosphorylated, Numb exhibits increased efficacy in binding TrkB and in promoting a chemotactic response to BDNF. Therefore, Numb functions in a feed-forward loop to promote chemotaxis of neural precursors, linking BDNF, an extracellular cue, to aPKC, a critical component of the intrinsic polarity machinery.     

Bacterial proteins binding to the mammalian extracellular matrix

Pathogenic bacteria frequently express surface proteins with affinity for components of the mammalian extracellular matrix, i.e. collagens, laminin, fibronectin or proteoglycans. This review summarizes our current knowledge on the mechanisms of bacterial adherence to extracellular matrices and on the biological significance of these interactions. The best-characterized bacterial proteins active in these interactions are the mycobacterial fibronectin-binding proteins, the fibronectin- and the collagen-binding proteins of staphylococci and streptococci, specific enterobacterial fimbrial types, as well as the polymeric surface proteins YadA of yersinias and the A-protein of Aeromonas. Some of these bacterial proteins are highly specific for an extracellular matrix protein, some are multifunctional and express binding activities towards a number of target proteins. The interactions can be based on a protein-protein or on a protein-carbohydrate interaction, or on a bridging mechanism mediated by a bivalent soluble target protein. Many of the interactions have also been demonstrated on tissue sections or in vivo, and adherence to the extracellular matrix has been shown to promote bacterial colonization of damaged tissues.     

Morphogenetic messages are in the extracellular matrix: biotechnology from bench to bedside

The origin and evolution of multicellular metazoa was accompanied by the appearance of extracellular matrix. The demineralized extracellular matrix of bone is enriched in morphogenetic proteins that induce bone. Bone morphogenetic proteins (BMPs) are intimately bound to collagens. BMP-4 has high affinity for type-IV collagen, and other binding proteins such as noggin and chordin. Soluble morphogens are kept in the solid state by extracellular matrix. In this sense Nature used the principles of affinity matrices long before humans patented the principle of affinity chromatography.     

Release of the extracellular matrix from conidia ofBlumeria graminis in relation to germination

The release of extracellular matrix (ECM) and the emergence of germ tubes from conidia ofBlumeria graminis were studied by light microscopy and micromanipulation. More prompt and frequent ECM release was confirmed on an artificial hydrophobic substratum than on an artificial hydrophilic substratum. Conidia initially incubated on the hydrophilic substratum were transferred by micromanipulation to either the hydrophobic or the hydrophilic substrata. Immediately after transfer onto the hydrophobic substratum, 75% of conidia released ECM, whereas only 16% did so upon transfer to the hydrophilic substratum. Conidia transferred onto the hydrophobic substratum produced a primary germ tube (PGT) more promptly and frequently than those transferred to the hydrophilic substratum. Thus, conidia recognize and respond to substratum hydrophobicity perhaps immediately after contact. When inoculated onto either isolated barley cuticle or the hydrophobic artificial substratum, 2/3 of the conidia produced a PGT from their polar regions. By contrast, on the hydrophilic substratum 2/3 of conidia did so from the side region. These results show that substratum hydrophobicity affects the location of PGT emergence from conidia. Furthermore, the study indicates that very rapid recognition of surface hydrophobicity by conidia promotes ECM release and this in turn may influence the location of PGT emergence.     

Augmentation cystoplasty and extracellular matrix scaffolds: an ex vivo comparative study with autogenous detubularised ileum

Background

Augmentation cystoplasty (AC) with autogenous ileum remains the current gold standard surgical treatment for many patients with end-stage bladder disease. However, the presence of mucus-secreting epithelium within the bladder is associated with debilitating long-term complications. Currently, decellularised biological materials derived from porcine extracellular matrix (ECM) are under investigation as potential augmentation scaffolds. Important biomechanical limitations of ECMs are decreased bladder capacity and poor compliance after implantation.

Methodology/Principal Findings

In the present ex vivo study a novel concept was investigated where a two-fold increase in ECM scaffold surface-area relative to the resected ileal segment was compared in ovine bladder models after AC. Results showed that bladder capacity increased by 40±4% and 37±11% at 10 mmHg and compliance by 40.4±4% and 39.7±6% (ΔP = 0–10 mmHg) after AC with ileum and porcine urinary bladder matrix (UBM) respectively (p<0.05). Comparative assessment between ileum and UBM demonstrated no significant differences in bladder capacity or compliance increases after AC (p>0.05).

Conclusions

These findings may have important clinical implications as metabolic, infective and malignant complications precipitated by mucus-secreting epithelium are potentially avoided after augmentation with ECM scaffolds.