Jekyll, a family of phage-plasmid shuttle vectors

A series of shuttle vectors has been constructed, which consist of a plasmid carrying a polylinker sequence and an M13 origin integrated into a lambda vector. A short direct repeat flanking the plasmid allows plasmid excision by homologous recombination. Sequences are cloned into unique restriction sites within the plasmid, and can be recovered either in phage or plasmid form, or can be packaged further as single-stranded DNA phage. These vectors therefore combine the efficiency of phage lambda cloning and screening with the ease of handling or analysing plasmid or M13 clones.     

Control of cloned gene expression by promoter inversion in vivo: construction of the heat-pulse-activated att-nutL-p-att-N module

We have constructed a prototype of gene-expression plasmids with three novel properties: its "OFF phase" is absolute in all common hosts because the expression promoter is facing away from the studied gene and is blocked by a strong terminator; the "ON phase" is attained by the rapid and efficient inversion of the promoter; only a short heat pulse or exposure to other inducing agents is required to initiate this two-stage process. In the first stage, synthesis of the phage lambda Int protein is induced by the transient derepression of the properly engineered lambda xis- cIts857 prophage. In the immediately following second stage, Int causes inversion of a promoter cloned between the inverted ----P'OP phage att site and the normally oriented ----delta PO delta P' pseudo-bacterial att site. The inverted promoter can now control the expression of the studied gene and also of the lambda N gene cloned in tandem. The N product, in conjunction with the nutL site placed downstream of the promoter, permits efficient antitermination of any terminators present in the att sites, in the plasmid or in the cloned DNA, making this system efficient and of practical value. Employing the promoter-inverting plasmid, it was possible to obtain rapid onset and a high level of galactokinase synthesis from the cloned galK gene. Only a transient, 10-min induction at 42 degrees C was employed, permitting protein synthesis at 30 degrees C, which might be of importance for thermosensitive products. Furthermore, the entire promoter-inversion module can be transferred to any plasmid as a 1.3-kb AvaI-ClaI fragment (see Fig. 1).(ABSTRACT TRUNCATED AT 250 WORDS)     

Recombination between bacteriophage lambda and plasmid pBR322 in Escherichia coli

Recombinant lambda phages were isolated that resulted from recombination between the lambda genome and plasmid pBR322 in Escherichia coli, even though these deoxyribonucleic acids (DNAs) did not share extensive regions of homology. The characterization of these recombinant DNAs by heteroduplex analysis and restriction endonucleases is described. All but one of the recombinants appeared to have resulted from reciprocal recombination between a site on lambda DNA and a site on the plasmid. In general, there were two classes of recombinants. One class appeared to have resulted from recombination at the phage attachment site that probably resulted from lambda integration into secondary attachment sites on the plasmid. Seven different secondary attachment sites on pBR322 were found. The other class resulted from plasmid integration at other sites that were widely scattered on the lambda genome. For this second class of recombinants, more than one site on the plasmid could recombine with lambda DNA. Thus, the recombination did not appear to be site specific with respect to lambda or the plasmid. Possible mechanisms for generating these recombinants are discussed.     

Efficient introduction of cloned mutant alleles into the Escherichia coli chromosome.

An efficient method for moving mutations in cloned Escherichia coli DNA from plasmid vectors to the bacterial chromosome was developed. Cells carrying plasmids that had been mutated by the insertion of a resistance gene were infected with lambda phage containing homologous cloned DNA, and resulting lysates were used for transduction. Chromosomal transductants (recombinants) were distinguished from plasmid transductants by their ampicillin-sensitive phenotype, or plasmid transductants were avoided by using a recBC sbcB E. coli strain as recipient. Chromosomal transductants were usually haploid when obtained in a nonlysogen because of selection against the lambda vector and partially diploid when obtained in a lysogen. Pure stocks of phage that carry the resistance marker and transduce it at high frequency were obtained from transductant bacteria. The lambda-based method for moving mutant alleles into the bacterial chromosome described here should be useful for diverse analyses of gene function and genome structure.     

A plasmid cloning system utilizing replication and packaging functions of the filamentous bacteriophage fd

DNA cloning vectors were developed which utilize the replication origin (ori) of bacteriophage fd for their propagation. These vectors depend on the expression of viral gene 2 that was inserted into phage lambda, which in turn was integrated into the host genome. The constitutive expression of gene 2 in the host cells is sufficient for the propagation of at least 100 pfd plasmids per cell. In addition to the fd ori, the pfd vectors carry various antibiotic-resistance genes and unique restriction sites. Some of these vectors have no homologies to commonly used pBR plasmids or to lambda DNA. The nucleotide sequence of the vectors can be deduced from published sequences. Large DNA inserts can be stably propagated in pfd vectors; these are more stable than similar DNA fragments cloned in intact genomes of filamentous bacteriophage. Inclusion of phage sequences required for efficient phage packaging and infection with a helper phage resulted in formation of phage particles containing single-stranded plasmid genomes. Growth at 42 degrees C without selective pressure results in loss of pfd plasmids.     

The phi 80 and P22 attachment sites. Primary structure and interaction with Escherichia coli integration host factor

Although the lambdoid bacteriophage phi 80 and P22 possess site-specific recombination systems analogous to bacteriophage lambda, they have different attachment (att) site specificities. We have identified and determined the nucleotide sequences of the att sites of phi 80 and P22 and have examined the interaction of these sites with purified Escherichia coli integration host factor (IHF). The sizes of the homologous core regions of the att sites vary greatly: P22 has a 46-base pair core, while phi 80 and lambda have 17- and 15-base pair cores, respectively. The core sequences of the three phage show no significant homology, although dispersed regions of homology in arm sequences indicate that the three phage att sites are related. All three att sites have a high A + T composition, and restriction fragments carrying these sites migrate anomalously upon polyacrylamide gel electrophoresis. IHF binds to a site to the left of the common core in the phi 80 and P22 phage att sites (attP) and to a site to the right of the core in P22 attP and attB (the bacterial att site). In the lambda system, IHF interacts with three regions on attP (designated H1, H2, and H') and none on attB (Craig N., and Nash, H.A. (1984) Cell 39, 707-716). Alignment of the IHF sites of all three phage results in a consensus sequence for IHF binding, Pyr-AANNNNTTGATAT. Among the three phage, the number of IHF sites differs; however, the location and orientation of the binding sites in relation to the respective core regions are well conserved. An IHF site analogous to lambda H2 is present in both phi 80 and P22 attP, while a site analogous to lambda H' is present in P22 attP. This conservation suggests that IHF plays a very similar role in the site-specific recombination pathways of all three phage, and that the flanking arm sequences are necessary for phi 80 and P22 attP function, as is the case for lambda attP function. These structural similarities presumably reflect a conservation of the mechanism of site-specific recombination for the three phage.     

Excision process of integrated plasmid pBD12 from the Bacillus subtilis chromosome

We studied the behavior of pBD12 plasmid integrated into Bacillus subtilis chromosome via homologous recombination. One copy of the plasmid was integrated into the chromosome, it conferred resistance to low concentrations of antibiotics. Clones with enhanced resistance bearing autonomous plasmid DNAs appeared with a frequency 10(-6) in rec+ but not in recE strain with the integrated plasmid. By restriction and hybridization analysis of some excised plasmids, the sites of excision were determined, chromosomal location of pBD12 plasmid was found to be at the terminal fragment of prophage DNA, so that the att site of phi 105 phage is supposed to be situated on the EcoRI fragment of phage DNA.     

The DNA between Rz and cosR in bacteriophage lambda is nonessential

Near the right end of phage lambda DNA, between gene Rz and the cos site, are 2050 bp of apparently non-coding DNA. We have cloned a lambda DNA fragment containing this DNA into a plasmid and constructed a deletion, omega l, extending from a site within the Rz gene to a site about 560 bp from cos. This deletion could be recombined into viable lambda phage at a frequency equal to that observed for the undeleted sequence. Recombinant phage lambda carrying the omega l deletion were demonstrated to have the same burst size and kinetics of phage production as undeleted lambda. The omega l deletion can be used to extend the capacity of lambda cloning vectors and to provide a region for the insertion of heterologous DNA which should exhibit controllable high level expression from the lambda late promoter, p'R.     

Retrovirus-mediated insertional mutagenesis: phagemid rescue of flanking DNA by selecting plasmid ori

A method for screening recombinant lambda libraries was devised to select phage containing genomic regions containing provirus insertions of retroviruses that carry the kanamycin and G418 resistance factor neo and the origin of replication derived from pBR322 (oripBR). Such recombinants are phagemids, able to replicate as bacteriophages or as plasmids under lambda repressor control. lambda repressor was cloned into a plasmid derived from pSC101 that is compatible with pBR322-derived phagemids. A strain carrying this plasmid may be used to select phagemids derived from a single proviral insertion with 100% efficiency from complex recombinant libraries. Homologous recombination between proviral long terminal repeats was observed at a rate of 10(-4)/plaque-forming unit in recABC+ strains. Despite this frequency, intact phagemids are easily recovered as phage after temperature shift to 42 degrees C. Since oripBR itself is a selectable marker in this system, the method could be applied to recover any sequence carrying the ori sequence from pBR322.     

Phasmid vectors for identification of genes by complementation of Escherichia coli mutants.

A bacteriophage lambda cloning vector was designed to facilitate the isolation of genes from procaryotic organisms by complementation of Escherichia coli mutants. This vector, lambda SE4, was constructed by attaching a very-low-copy-number replication system (from the plasmid NR1) and a spectinomycin resistance gene to the left arm of lambda 1059 (Karn et al., Proc. Natl. Acad. Sci. U.S.A. 77:5172-5176, 1980). This phasmid cloning vector is capable of growing lytically as a phage in a nonimmune host or lysogenically as a phasmid in an immune host. This phasmid utilizes the Spi- selection for insertions of DNA into the vector and has the ability to accept 2- to 19-kilobase Sau3A1, BamHI, BglII, BclI, or XhoII fragments; recombinants lysogenize immune hosts as single-copy-number selectable plasmids at 100% frequency. An E. coli library was constructed by using the initial vector lambda SE4, and clones of a number of representative genes were identified. A typical clone, lambda ant+, was shown to be readily mutagenized by a mini-Tn10 transposon. A general method for transferring cloned DNA segments onto bacteriophage lambda was developed. The method involves the use of in vivo recombination with a selection and was used to construct two derivatives of lambda SE4. Possible uses of these vectors and of the method for transferring cloned DNA onto phage lambda are discussed.     

Phage R4 integrase mediates site-specific integration in human cells.

The R4 integrase is a site-specific, unidirectional recombinase derived from the genome of phage R4 of Streptomyces parvulus. Here we define compact attB and attP recognition sites for the R4 integrase and express the enzyme in mammalian cells. We demonstrate that R4 integrase functions in human cells, performing efficient and precise recombination between R4 attB and attP sites cloned on an extrachromosomal vector. We also provide evidence that the enzyme can mediate integration of an incoming plasmid bearing an attB or attP site into endogenous sequences in the human genome. Furthermore, when R4 attB and attP sites are placed into the human genome, either by random integration or at a specific sequence by using the phi C31 integrase, they act as targets for integration of incoming plasmids bearing R4 att sites. The R4 integrase has immediate utility as a site-specific integration tool for genome engineering, as well as potential for further development.     

Integration of specialized transducing bacteriophage lambda cI857 St68 h80 dgnd his by an unusual pathway promotes formation of deletions and generates a new translocatable element.

Molecular and genetic studies have revealed that several illegitimate recombinational events are associated with integration of the specialized transducing bacteriophage lambda cI57 St68 h80 dgnd his into either the Escherichia coli chromosome or into a plasmid. Most Gnd+ His+ transductants did not carry the prophage at att phi-80, and 10% were not immune to lambda, i.e., "nonlysogenic." Integration of the phage was independent of the phage Int and Red gene products and of the host's general recombination (Rec) system. In further studies, bacterial strains were selected which carried the phage integrated into an R-factor, pSC50. Restriction endonuclease analysis of plasmid deoxyribonucleic acid (DNA) purified from these strains showed that formation of the hybrid plasmids resulted from recombination between a single region of pSC50 and one of several sites within the lambda-phi 80 portion of the phage. Furthermore the his-gnd region of the phage, present in the chromosome of one nonlysogenic transductant, was shown to be able to translocate to pSC50. Concomitant deletion of phage DNA sequences or pSC50 DNA was frequently observed in conjunction with these integration or translocation events. In supplemental studies, a 22- to 24-megadalton segment of the his-gnd region of the chromosome of a prototrophic recA E. coli strain was shown to translocate to pSC50. One terminus of this translocatable segment was near gnd and was the same as a terminus of the his-gnd segment of the phage which translocated from the chromosome of the nonlysogenic transductant. These data suggest that integration of lambda cI857 St 68 h80 dgnd his may be directed by a recombinationally active sequence on another replicon and that the resulting cointegrate structure is subject to the formation of deletions which extend from the recombinationally active sequence. Translocation of the his-gnd portion of the phage probably requires prior replicon fusion, whereas the his-gnd region of the normal E. coli chromosome may comprise a discrete, transposable element.     

New transducing phage with RNA polymerase beta- and beta'-subunit genes derived from a hybrid phage lambda att80: isolation, genetic analysis and physical mapping]

A hybrid lambda att 80 phage with the genetic structure lambda (A-J) phi 80 (att-int-xis) imm lambda..cI857s7 is shown to be a convenient vector for creating transducing phages. On the one hand, the restriction analysis indicates that it has 3 restriction sites for EcoRI in comparison with 5 and 9 sites for parental phages lambda and phi 80 respectively. On the other hand, its buoyant density is less than that of phage lambda and under centrifugation it is easier separated from the phage transducing particles. When lambda att 80 prophage was excluded from the bfe locus of Escherichia coli, transducing phages with genes of two RNA polymerase beta-subunits (rpoB and rpoC) were isolated. To identify the latter, a convenient genetic test was worked out. A physical map of lambda att 80 drifd 35 transducing phage, carrying rpoB and rpoC genes has been constructed using endonucleases EcoRI and HindIII. A comparison of this map and the corresponding maps of transducing phages lambda drifd 18 and lambda drifd 47, studied earlier, led to the discovery of two integration sites of phage lambda within the locus bfe spaced apart by about 1800 nucleotide pairs. At all the sites both phages (lambda and lambda att 80) have integrated in the locus bfe in the counter clockwise order.     

High efficiency transduction of single strand plasmid DNA into enteric bacteria

Summary This report demonstrates high efficiency transduction of enteric bacteria using single strand plasmids packaged in M13 phage capsids. Transformation by plasmid DNA is usually a very inefficient process in many enteric bacteria other than Escherichia coli K12. Plasmids carrying an M13 origin of replication can be replicated and packaged when cells carrying such plasmids are infected with M13 or a derivative helper phage. By introducing an F plasmid into E. coli, Serratia marcescens, Citrobacter freundii, and Enterobacter aerogenes, these species can now be infected at high efficiency with M13 phage and with packaged single strand plasmids, yielding an efficient method to introduce cloned DNA fragments into these bacteria. The titer of colony forming units in a lysate was essentially equivalent in all the bacteria, demonstrating an equal efficiency of transduction of these other enteric bacteria compared to E. coli.     

Transfer of chromosomal genes and formation of R'-derivatives using PR4::D312cts15 plasmids in Pseudomonas aeruginosa cells

Several hybrid RP4 plasmids containing the genome of heat-inducible D3112cts15 phage integrated into 2 different sites of RP4 were selected. It was shown that the plasmids RP4::D3112cts15 mobilized the chromosome of Pseudomonas aeruginosa from many sites located in different chromosome regions. Chromosomal recombinants are, formed at frequencies of about 10(-4) per recipient cell. Analysis of coinheritance of unselected markers showed that the majority of recombinants inherited short donor chromosome fragments (about 5 min). R' plasmids can be easily selected by mating with a rec- recipient. For instance, the frequency of selection of R' plasmids containing argH+ locus was about 10(-5) per donor cell. Conjugative transfer of RP4::D3112cts15 into nonlysogenic strains PAO P. aeruginosa results in partial or complete loss of prophage from a hybrid plasmid. The RP4::D3112cts15 plasmids appear to have retained the broad host range of the original RP4 (they are maintained in P. putida and Escherichia coli).     

Structural analysis of the actinophage phi C31 attachment site.

The lysogenisation of actinophage phi C31 in S. coelicolor J 1501 occurs by site-specific recombination. The DNA segments containing the attachment sites on the host chromosome, the phage genome and the two junctions created by the insertion of the prophage were cloned and the nucleotide sequences determined. The attachment sites (att) share an extremely short common sequence of three base pairs. Adjacent to the core sequences some direct- and inverted repeats were found as potential binding sites for proteins involved in site-specific recombination.     

Formation of oligomeric structures from plasmid DNA carrying cos lambda that is packaged into bacteriophage lambda heads.

Plasmids that carry cos lambda, the region necessary for lambda phage packaging and that are as small as four kilobases in size can be packaged into lambda phage heads in head-to-tail tandem oligomeric structures. Multimeric oligomers as large as undecamers have been detected. Oligomer formation depends upon the products of red and gam of lambda, and the general recombination occurs between different plasmids that share homologous DNA regions. The packaging efficiency of plasmids depends on its copy number in cells and its genome size. Upon injection into a cell, the DNA establishes itself as a plasmid in a tandem structure. When such a plasmid in a high oligomeric structure is used as the source of packaging DNA, the packaging efficiency of the plasmids is elevated. The oligomers are stable in recA cells, whereas they drift toward lower oligomers in recA+ cells.     

Replication defective RP4 plasmids recovered after chromosomal integration

pHH6000 is a composite replicon made by the in vitro ligation of the IncP plasmid RP4 to a fragment of bacteriophage lambda capable of autonomous replication. Derivatives were selected in which it had integrated into the Escherichia coli chromosome by homologous recombination with the resident lambda prophage, and plasmids were subsequently regenerated from the integrated molecules. Although of the same molecular size as pHH6000, all had altered properties: those recovered from the chromosome of cells simultaneously carrying a distinguishable autonomous IncP plasmid showed a 100- to 1000-fold reduction in their ability to become established in a lambda lysogen; those regenerated from cells with no autonomous IncP plasmid were no longer RP4 replicons, now being dependent on replication functions encoded by the lambda DNA they carry and therefore unable to form a plasmid in a lambda lysogen. This second class of plasmids still exhibited normal RP4 incompatibility and stability even though neither property is encoded by the lambda replicator DNA. It was concluded that expression of RP4 incompatibility and partitioning control do not require an intact RP4 replicon. The data also suggest that the presence in the chromosome of a normal RP4 molecule may be deleterious to the host, although the manner in which the integrated molecules were obtained allows other explanations. The composite plasmids replicating from cloned lambda genes should be useful in analysis of the regulated distribution of RP4 molecules at cell division.