Effect of γ-irradiation on pasting and emulsification properties of octenyl succinylated rice starches

Octenylsuccinylated (OS) starches from waxy rice or high-amylose rice (28.1% amylose) (DS 0.023 and 0.025, respectively) were gamma-irradiated at 10, 30, or 50kGy and their pasting and thermal properties, crystallinity, and emulsification property were examined. When the OS starches were irradiated, the degrees of substitution gradually decreased as irradiation dose increased. A significant decrease in pasting viscosity was observed with an increase in irradiation dose, indicating the presence of chain degradation induced by the radiation. The melting temperature and enthalpy determined by differential scanning calorimetry increased slightly by irradiating at 10 or 30kGy. Little change in crystallinity was observed in the X-ray diffraction analysis for the OS high-amylose rice starch regardless of irradiation doses, whereas a decrease in crystallinity was observed with the OS waxy starch irradiated at 50kGy. Chain degradation induced by irradiation occurred mainly in the amorphous regions, but some loss of crystallinity occurred when the irradiation was excessive. The OS starches showed greater emulsion capacity and stability than the native counterparts due to their amphipathic nature. The irradiation further improved the emulsification properties of OS starches. The irradiation at 10kGy was optimal, and treating at higher doses decreased the emulsion capacity and stability of the OS starches.     

Effect of monopropylene glycol and gamma irradiation on Yarrowia lipolytica lipase stabilization

This work investigated the effects of monopropylene glycol, protease inhibitor, and gamma irradiation on Yarrowia lipolytica lipase stability during storage. Enzyme liquid stabilization was achieved by addition of monopropylene glycol (MPG) at respective concentrations of 50, 75, and 90%, the protease inhibitors (P2714 and P8215) at 0.1%, and the gamma irradiation with 10kGy, 15kGy, and 25kGy doses. The results showed that monopropylene glycol limited the microorganism growth and decreased the enzymatic activity at high concentration (up to 50%), at two temperatures (20 and 4 degrees C). Enzyme stored at 20 degrees C lost its activity by 80% after two months. This loss was attributed to the protease's effect. At this temperature, the protease's activities have been limited by the specific inhibitors. The gamma irradiations improve microbial safety of liquid enzyme.     

Photocurable biodegradable liquid copolymers: synthesis of acrylate-end-capped trimethylene carbonate-based prepolymers, photocuring, and hydrolysis

Various photocurable liquid biodegradable trimethylene carbonate (TMC)-based (co)oligomers were prepared by ring-opening (co)polymerization of TMC with or without L-lactide (LL) using low molecular weight poly(ethylene glycol) (PEG) (mol wt 200, 600, or 1000) or trimethylolpropane (TMP) as an initiator. Resultant (co)oligomers were pastes, viscous liquids, or liquids at room temperature, depending on the monomer composition and monomer/initiator ratio. Liquid (co)oligomers were subsequently end-capped with acrylate groups. Upon visible-light irradiation in the presence of camphorquinone as a radical generator, rapid liquid-to-solid transformation occurred to produce photocured solid. The photocuring yield increased with photoirradiation time, photointensity, and camphorquinone concentration. The photocured polymers derived from low molecular weight PEG (PEG200) and TMP exhibited much reduced hydrolysis potential compared with PEG1000-derived polymers in terms of weight loss, water uptake, and swelling depth. Force-distance curve measurements by nanoindentation using atomic force microscopy clearly showed that Young's moduli of the photocured polymer films decreased with increasing hydrolysis time. Their potential biomedical applications are discussed.     

Acrylate end-capped poly(ester-carbonate) and poly(ether-ester)s for polymer-on-multielectrode array devices: synthesis, photocuring, and biocompatibility

Polymeric materials based on epsilon-caprolactone (CL), 1,5-dioxepan-2-one (DXO), and trimethylene carbonate (TMC) were prepared and evaluated as possible candidates for polymer-on-multielectrode (PoM) applications. CL was copolymerized with either DXO or TMC in the presence of the diol initiator 1,4-benzenedimethanol (BDM). The ring-opening polymerization experiments, carried out in bulk and using tin(II) catalysis, yielded the desired low molecular weight random copolymer diols, as evidenced by NMR, IR, MALDI-ToF MS, and DSC techniques. Upon reaction with acryloyl chloride, the corresponding diacrylate end-capped copolymers were obtained. The latter were characterized by NMR and IR spectroscopy, and their photocross-linking (in the presence of a UV initiator) was followed by ATR-FTIR spectroscopy. Transparent and soft thin films of the copoly(ether-ester) and copoly(ester-carbonate) diacrylates were prepared and cured under UV irradiation. The resulting polymeric films showed good biocompatibility properties as far as in vitro neural stem cells proliferation and differentiation to neurons and astrocytes are concerned. Noteworthy are the beneficial effects obtained upon preconditioning the copolymers by means of the cell-culture medium and the excellent properties shown particularly by the CL-TMC copolymer. Moreover, preliminary results show that microchannel formation by photocuring is possible with the synthesized polymers.     

Comparative studies on the conformational change and aggregation behavior of irradiated carrageenans and agar by dynamic light scattering

The conformational associative properties of kappa-, iota-, and lambda-carrageenan and agar with irradiation dose were studied by dynamic light scattering. The random scission of the carrageenans and agar by gamma irradiation resulted in the formation of polydispersed lower molecular weight fragments. At high doses, the system moves towards uniformity. Conformational change from coil to helix was observed in all carrageenans and agar at doses up to 100 kGy. The conformational change in lambda-carrageenan may be due to the irregular and hybrid structure of this polysaccharide. Only agar and lambda-carrageenan still undergo conformational transition at a high dose of 200 kGy. Gelation is observed for kappa-, iota-carrageenan up to a dose of 50 kGy while gelation is still observed at 100 kGy for agar. Increase in the hydrodynamic radius with decreasing temperatures for the non-irradiated carrageenans follows this order: lambda-carrageenan>kappa-carrageenan>iota-carrageenan. Slight increases in hydrodynamic radius were observed with irradiation.     

In vivo study on the histocompatibility and degradation behavior of biodegradable poly(trimethylene carbonate-co-D,L-lactide)

The aim of this study was to explore the in vivo behavior and histocompatibility of poly(trimethylene carbonate-co-D,L-lactide) (PDLLA/TMC) and its feasibility of manufacturing cardiovascular stents. Copolymers with 50/50 molar ratio were synthesized by ring-opening polymerization with TMC and D, L-LA, or TMC and L-LA. Poly(L-lactide) (PLLA) was synthesized as a control. The films of the three polymers were implanted into 144 Wistar rats. At different time points of implantation, polymer films were explanted for the evaluation of degradation characteristics and histocompatibility using size exclusion chromatography , nuclear magnetic resonance , environmental scanning electron microscope , and optical microscope. Results showed that there were differences in the percentage of mass loss, molecular weight, shape and appearance changes, and inflammation cell counts between different polymers. With the time extended, the film's superficial structure transformed variously, which was rather obvious in the polymer of PDLLA/TMC. In addition, there were relatively lower inflammation cell counts in the PDLLA/TMC and poly(trimethylene carbonate-co-L-lactide) (PLLA/TMC) groups at different time points in comparison with those in the PLLA group. The differences were of statistical significance (P< 0.05) in the group of PDLLA/TMC vs. PLLA, and the group of PLLA/TMC vs. PLLA, but not within the PDLLA/TMC and PLLA/TMC groups (P> 0.05). These results suggested that the polymer of PDLLA/TMC (50/50) with favorable degradation performance and histocompatibility is fully biodegradable and suitable for manufacturing implanted cardiovascular stents.     

Lignin incorporation combined with electron-beam irradiation improves the surface water resistance of starch films

We investigated the potential of an electron-beam post-treatment to tailor the properties of 70/30 and 80/20 wt. extruded starch-lignin films. The effect of a 400 kGy radiation on films differing essentially by the kind of lignins incorporated (lignosulfonates/alkali lignins) was assessed both at the macroscopic and the molecular levels. Changes in the polymer molecular structure were studied by IR spectroscopy, by thioacidolysis as well as by model compound experiments. Electron beam-irradiation at 400 kGy, a rather high dose for processing natural polymers, alters to some extent the mechanical resistance of the starch-based materials. However this treatment substantially reduces the hydrophilic surface properties of the films, while not harming their biodegradability. Involved in radical cross-coupling reactions, lignin phenolic compounds are likely to play a primary role in the formation of a hydrophobic condensed network. This study suggests that lower irradiation doses might yield biomaterials with improved usage properties.     

Effect and aftereffect of gamma radiation pretreatment on enzymatic hydrolysis of wheat straw

Irradiation pretreatment of wheat straw was carried out at different doses by using Co-60 gamma radiation. The weight loss and fragility of wheat straw after irradiation, the combination effect of irradiation and mechanical crushing on enzymatic hydrolysis of wheat straw as well as the aftereffect of irradiation were examined. It is shown that irradiation can cause significant breakdown of the structure of wheat straw. The weight loss of wheat straw increased and the size distribution after crushing moved to fine particles at elevated irradiation doses. The glucose yield of enzymatic hydrolysis of wheat straw increased with increasing doses and achieved the maximum (13.40%) at 500 kGy. A synergistic effect between irradiation and crushing was observed, with a glucose yield of 10.24% at a dose of 500 kGy with powder of 140 mesh. The aftereffect of irradiation had important impact on enzymatic hydrolysis of wheat straw. The aftereffect (at 22nd day) of 400 kGy irradiation accounted for 20.0% of the initial effect for glucose production, and the aftereffects of 50, 100, 200 (at 9th day) and 300 kGy (at 20th day) accounted for 12.9%, 14.9%, 8.9% and 9.1%, respectively, for reducing sugar production.     

Effect of γ-irradiation on some physiochemical properties of konjac glucomannan

Konjac glucomannan (KGM) was irradiated at 5, 20, 50 and 100 kGy and the effects of γ-irradiation on some physiochemical properties of KGM were studied by using viscosimeter, colorimeter, gel permeation chromatography (GPC), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet (UV) spectroscopy, thermal gravimetric (TG) analysis and scanning electron microscopy (SEM). γ-irradiation led to significant degradation of KGM according to the significant reduction of the weight-average molecular weight (M_w). The apparent viscosity of KGM decreased with increasing dose, while the viscosity stability was improved after irradiation. The colour of KGM became more intense brown with increasing dose up to 20 kGy. FT-IR spectra indicated that γ-irradiation introduced no significant changes into the structure but UV spectra showed a distinct absorption peak at about 265 nm, increasing with irradiation dose, which was attributed to the formation of carbonyl groups or double bond. High irradiation dose (100 kGy) caused a small decrease of thermal stability but presented no visible fissures or splitting of KGM granules according to the TG analysis and SEM microphotographs.     

Effect of concentration and shell thickness on the optical behavior of aqueous CdTe/ZnSe core/shell quantum dots (QDs) exposed to ionizing radiation

In this work CdTe/ZnSe core/shell quantum dots (QDs) were synthesized via a simple, rapid and room temperature photochemical approach. Optical properties of aqueous prepared CdTe/ZnSe QDs were studied systematically under gamma irradiation with dose range of 0 Gy to 20 kGy. The obtained results showed a regular red shift behavior versus gamma irradiation dose, in photoluminescence peak and absorption edge of the CdTe/ZnSe QDs. Structural properties of CdTe/ZnSe QDs before and after gamma irradiation were characterized by means of X-ray diffraction (XRD), Raman and Fourier-transform infrared (FT-IR) analyses. The obtained results showed that the crystalline structure of CdTe/ZnSe core/shell QDs did not change after gamma irradiation. Concentration and shell thickness as two important factors on the sensitivity of CdTe/ZnSe QDs in front of gamma irradiation have been investigated. Based on this study, CdTe/ZnSe QDs are suggested as good candidates for gamma dosimeter.     

Cross-linked poly(trimethylene carbonate-co-L-lactide) as a biodegradable, elastomeric scaffold for vascular engineering applications

A series of copolymers of trimethylene carbonate (TMC) and L-lactide (LLA) were synthesized and evaluated as scaffolds for the production of artificial blood vessels. The polymers were end-functionalized with acrylate, cast into films, and cross-linked using UV light. The mechanical, degradation, and biocompatibility properties were evaluated. High TMC polymers showed mechanical properties comparable to human arteries (Young's moduli of 1.2-1.8 MPa and high elasticity with repeated cycling at 10% strain). Over 84 days degradation in PBS, the modulus and material strength decreased gradually. The polymers were nontoxic and showed good cell adhesion and proliferation over 7 days using human mesenchymal stem cells. When implanted into the rat peritoneal cavity, the polymers elicited formation of tissue capsules composed of myofibroblasts, resembling immature vascular smooth muscle cells. Thus, these polymers showed properties which were tunable and favorable for vascular tissue engineering, specifically, the growth of artificial blood vessels in vivo.     

Structural changes of skin and amnion grafts for transplantation purposes following different doses of irradiation

An important part of the preparation of biological material for transplantation is sterilization. The aim of our study was to assess the impact of ionizing radiation on three types of biological tissues and the impact of different doses on cells and extracellular matrix. Three types of frozen tissues (porcine skin xenografts, human skin allografts and human amnion) were divided into five groups, control and groups according to the dose of radiation to which these samples were exposed (12.5, 25, 35 and 50 kGy). The tissue samples were fixed by formalin, processed by routine paraffin technique and stained with hematoxylin and eosin, alcian blue at pH 2.5, orcein, periodic acid schiff reaction and silver impregnation. The staining with hematoxylin and eosin showed hydropic degeneration of the cells of epidermis in xenografts by the dose of 12.5 kGy, in human skin it was observed by the dose of 35 kGy. The staining for elastic fibers revealed damage of fine elastic fibers in the xenografts dermis by the dose of 12.5 kGy, in the allografts by 35 kGy. Another change was the disintegration of basement membrane of epithelium, especially in the human amnion at the dose of 50 kGy. The silver impregnation visualized nuclear chromatin condensation mainly in human amnion at the dose of 12.5 kGy. Our results have shown that the porcine xenografts and human amnion were more sensitive to irradiation than the human skin. In the next phase of the project we will focus at more detailed changes in the tissues using immunohistochemical techniques.     

γ-Irradiation of PEGd,lPLA and PEG-PLGA Multiblock Copolymers: I. Effect of Irradiation Doses

To evaluate the effects of different gamma irradiation doses on PEGd,lPLA and PEG-PLGA multiblock copolymers. The behaviour of the multiblock copolymers to irradiation was compared to that of PLA, PLGA polymers. PEGd,lPLA, PEG-PLGA, PLA and PLGA polymers were irradiated by using a ⁶⁰Co irradiation source at 5, 15, 25 and 50 kGy total dose. Characterization was performed on all samples before and after irradiation, by nuclear magnetic resonance (NMR), infrared absorption spectrophotometry (FTIR) and gel permeation chromatography (GPC). The effect of gamma irradiation on polymer stability was also evaluated. Results of NMR and FTIR suggest an increase in -OH and -COOH groups, attributed to scission reactions induced by irradiation treatment. Data of GPC analysis showed that the weight average molecular weight (Mw) of polymer samples decreased with increasing irradiation dose. The extent of Mw degradation expressed as percentage of Mw reduction was more prominent for polymers with high molecular weight as PEGd,lPLA and PLA. The dominant effect of gamma-irradiation on both polymer samples was chain scission. The multiblock copolymer PEGd,lPLA presented higher sensitivity to irradiation treatment with respect to PLA, likely due to the presence of PEG in the matrix. The effect of gamma irradiation continues over a much longer period of time after gamma irradiation has been performed. It is suggested that the material reacts with oxygen to form peroxyl free radicals, which may further undergo degradation reactions during storage after irradiation.     

Effect of gamma irradiation on mechanical properties of human cortical bone: influence of different processing methods

The secondary sterilisation by irradiation reduces the risk of infectious disease transmission with tissue allografts. Achieving sterility of bone tissue grafts compromises its biomechanical properties. There are several factors, including dose and temperature of irradiation, as well as processing conditions, that may influence mechanical properties of a bone graft. The purpose of this study was to evaluate the effect of gamma irradiation with doses of 25 or 35?kGy, performed on dry ice or at ambient temperature, on mechanical properties of non-defatted or defatted compact bone grafts. Left and right femurs from six male cadaveric donors aged from 46 to 54?years, were transversely cut into slices of 10?mm height, parallel to the longitudinal axis of the bone. Compact bone rings were assigned to the eight experimental groups according to the different processing method (defatted or non-defatted), as well as gamma irradiation dose (25 or 35?kGy) and temperature conditions of irradiation (ambient temperature or dry ice). Axial compression testing was performed with a material testing machine. Results obtained for elastic and plastic regions of stress-strain curves examined by univariate analysis are described. Based on multivariate analysis it was found that defatting of bone rings had no significant effect on any mechanical parameter studied, whereas irradiation with both doses decreased significantly the ultimate strain and its derivative toughness. The elastic limit and resilience were significantly increased by irradiation with the dose 25?kGy, but not 35?kGy, when the time of irradiation was longer. Additionally, irradiation at ambient temperature decreased maximum load, elastic limit, resilience, and ultimate stress. As strain in the elastic region was not affected, decreased elastic limit resulted in lower resilience. The opposite phenomenon was observed in the plastic region, where in spite of the lower ultimate stress, the toughness was increased due to the increase in the ultimate strain. The results of our study suggest that there may be an association between mechanical properties of bone tissue grafts and the damage process of collagen structure during gamma irradiation. This collagen damage in cortical bone allografts containing water does not depends on the temperature of irradiation or defatting during processing if dose of gamma irradiation does not exceed 35?kGy.     

Polymeric grafting of acrylic acid onto poly(3-hydroxybutyrate-co-3-hydroxyvalerate): surface functionalization for tissue engineering applications

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) melt processed disks and solvent cast films were modified by graft co-polymerization with acrylic acid (AAc) in methanol solution at ambient temperature using gamma irradiation (dose rate of 4.5 kGy/h). To assess the presence of carboxylic acid groups on the surface, reaction with pentafluorophenol was performed prior to X-ray photoelectron spectroscopy analysis. The grafting yield for all samples increased with monomer concentration (2-15%), and for the solvent cast films, it also increased with dose (2-9 kGy). However, the grafting yield of the melt processed disks was largely independent of the radiation dose (2-8 kGy). Toluidine blue was used to stain the modified materials facilitating visual information about the extent of carboxylic acid functionalization and depth penetration of the grafted copolymer. Covalent linking of glucosamine to the functionalized surface was achieved using carbodiimide chemistry verifying that the modified substrates are suitable for biomolecule attachment.     

Improvement of human skin cell growth by radiation-induced modifications of a Ge/Ch/Ha scaffold

Gelatin-/chitosan-/hyaluronan-based biomaterials are used in tissue engineering as cell scaffolds. Three gamma radiation doses (1, 10 and 25 kGy) were applied to scaffolds for sterilization. Microstructural changes of the irradiated polymers were evaluated by using scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). A dose of 25 kGy produced a rough microstructure with a reduction of the porosity (from 99 to 96 %) and pore size (from 160 to 123 μm). Radiation also modified the glass transition temperature between 31.2 and 42.1 °C (1 and 25 kGy respectively). Human skin cells cultivated on scaffolds irradiated with 10 and 25 kGy proliferated at 48 h and secreted transforming growth factor β3 (TGF-β3). Doses of 0 kGy (non-irradiated) or 1 kGy did not stimulate TGF-β3 secretion or cell proliferation. The specific growth rate and lactate production increased proportionally to radiation dose. The use of an appropriate radiation dose improves the cell scaffold properties of biomaterials.     

Sterilization of tendon allografts: a method to improve strength and stability after exposure to 50 kGy gamma radiation

Terminal sterilization of tendon allografts with high dose gamma irradiation has deleterious effects on tendon mechanical properties and stability after implantation. Our goal is to minimize these effects with radio protective methods. We previously showed that radio protection via combined crosslinking and free radical scavenging maintained initial mechanical properties of tendon allografts after irradiation at 50 kGy. This study further evaluates the tissue response and simulated mechanical degradation of tendons processed with radio protective treatment, which involves crosslinking in 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide followed by soaking in an ascorbate/riboflavin-5-phosphate solution. Control untreated and treated tendons were irradiated at 50 kGy and implanted in New Zealand White rabbit knees within the joint capsule for four and 8 weeks. Tendons were also exposed to cyclic loading to 20 N at one cycle per 12 s in a collagenase solution for 150 cycles, followed by tension to failure. Control irradiated tendons displayed increased degradation in vivo, and failed prematurely during cyclic processing at an average of 25 cycles. In contrast, radio protected irradiated tendons displayed greater stability following implantation over 8 weeks, and possessed strength at 59 % of native tendons and modulus equivalent to that of native tendons after cyclic loading in collagenase. These results suggest that radio protective treatment improves the strength and the stability of tendon allografts.     

A combination of gamma irradiation and CaCl2 immersion for a pectin-based biodegradable film

Using citrus pectin a biodegradable film was prepared by a combination treatment of gamma irradiation (0, 10, 20, and 30 kGy) and CaCl₂ immersion (0, 5, and 10%) cross-linking. The tensile strength of the pectin-based film was the highest in the 5% CaCl₂ treatment at 20 kGy of an irradiation dose. The tensile strength of the film with CaCl₂ was generally higher than that of the non-CaCl₂ treatment. The elongation at break and water vapor permeability were the lowest at a CaCl₂ of 5% among the irradiated treatments. The total organic carbon content produced from the Paenibacillus polymyxa and Pseudomonas aeruginosa showed that the film of the 20 kGy-irradiated film was lower than those of the 0, 10, and 30 kGy-irradiated films. In conclusion, irradiation of the film casting solution at 20 kGy combined with a 5% CaCl₂ immersion resulted in film with improved mechanical properties and biodegradability.     

Sterilization of allograft bone: effects of gamma irradiation on allograft biology and biomechanics

Gamma irradiation from Cobalt 60 sources has been used to terminally sterilize bone allografts for many years. Gamma radiation adversely affects the mechanical and biological properties of bone allografts by degrading the collagen in bone matrix. Specifically, gamma rays split polypeptide chains. In wet specimens irradiation causes release of free radicals via radiolysis of water molecules that induces cross-linking reactions in collagen molecules. These effects are dose dependent and give rise to a dose-dependent decrease in mechanical properties of allograft bone when gamma dose is increased above 25 kGy for cortical bone or 60 kGy for cancellous bone. But at doses between 0 and 25 kGy (standard dose), a clear relationship between gamma dose and mechanical properties has yet to be established. In addition, the effects of gamma radiation on graft remodelling have not been intensively investigated. There is evidence that the activity of osteoclasts is reduced when they are cultured onto irradiated bone slices, that peroxidation of marrow fat increases apoptosis of osteoblasts; and that bacterial products remain after irradiation and induce inflammatory bone resorption following macrophage activation. These effects need considerably more investigation to establish their relevance to clinical outcomes. International consensus on an optimum dose of radiation has not been achieved due to a wide range of confounding variables and individual decisions by tissue banks. This has resulted in the application of doses ranging from 15 to 35 kGy. Here, we provide a critical review on the effects of gamma irradiation on the mechanical and biological properties of allograft bone.     

Effect of low dose and moderate dose gamma irradiation on the mechanical properties of bone and soft tissue allografts

The increased use of allograft tissue for musculoskeletal repair has brought more focus to the safety of allogenic tissue and the efficacy of various sterilization techniques. Gamma irradiation is an effective method for providing terminal sterilization to biological tissue, but it is also reported to have deleterious effects on tissue mechanics in a dose-dependent manner. At irradiation ranges up to 25 kGy, a clear relationship between mechanical strength and dose has yet to be established. The aim of this study was to investigate the mechanical properties of bone and soft tissue allografts, irradiated on dry ice at a low absorbed dose (18.3–21.8 kGy) and a moderate absorbed dose (24.0–28.5 kGy), using conventional compressive and tensile testing, respectively. Bone grafts consisted of Cloward dowels and iliac crest wedges, while soft tissue grafts consisted of patellar tendons, anterior tibialis tendons, semitendinosus tendons, and fascia lata. There were no statistical differences in mechanical strength or modulus of elasticity for any graft irradiated at a low absorbed dose, compared to control groups. Also, bone allografts and two soft tissue allografts (anterior tibialis and semitendinosus tendon) that were irradiated at a moderate dose demonstrated similar strength and modulus of elasticity values to control groups. The results of this study support the use of low dose and moderate dose gamma irradiation of bone grafts. For soft tissue grafts, the results support the use of low dose irradiation.