Modulation of the protein environment in the hydrophilic pore of the ammonia transporter protein AmtB upon GlnK protein binding

The conduction of ammonia/ammonium (NH3/NH4(+)) through the channel protein AmtB is inhibited by the binding of the signal transduction protein GlnK. In the AmtB-GlnK binding interface, there exists an NH3/NH4(+) binding site--Am6. The calculated pK(a) values at the Am6 sites in both the AmtB-GlnK complex and isolated AmtB implies the dominance of an uncharged NH3 state. The GlnK protein binding causes a significant downshift in the Am6 pK(a) value of the AmtB. However, this downshift is perfectly compensated by the reorientation of the protein backbone (carbonyl group of Cys312 from the AmtB part) upon AmtB-GlnK complex formation.     

Computational study of the binding affinity and selectivity of the bacterial ammonium transporter AmtB

We report results from microscopic molecular dynamics and free energy perturbation simulations of substrate binding and selectivity for the Escherichia coli high-affinity ammonium transporter AmtB. The simulation system consists of the protein embedded in a model membrane/water surrounding. The calculated absolute binding free energies for the external NH(4)(+) ions are between -5.8 and -7.3 kcal/mol and are in close agreement with experimental data. The apparent pK(a) of the bound NH(4)(+) increases by more than 4 units, indicating a preference for binding ammonium ion and not neutral ammonia. The external binding site is also selective for NH(4)(+) toward monovalent metal cations by 2.4-4.4 kcal/mol. The externally bound NH(4)(+) shows strong electrostatic interactions with the proximal buried Asp160, stabilized in the anionic form, whereas the interactions with the aromatic rings of Phe107 and Trp148, lining the binding cavity, are less pronounced. Simulated mutation of the highly conserved Asp160 to Asn reduces the pK(a) of the bound ammonium ion by approximately 7 units and causes loss of its binding. The calculations further predict that the substrate affinity of E. coli AmtB depends on the ionization state of external histidines. The computed free energies of hypothetical intermediate states related to transfer of NH(3), NH(4)(+), or H(2)O from the external binding site to the first position inside the internal channel pore favor permeation of the neutral species through the channel interior. However, the predicted change in the apparent pK(a) of NH(4)(+) upon translocation from the external site, Am1, to the first internal site, Am2, indicates that ammonium ion becomes deprotonated only when it enters the channel interior.     

On the equivalence point for ammonium (de)protonation during its transport through the AmtB channel

Structural characterization of the bacterial channel, AmtB, provides a glimpse of how members of its family might control the protonated state of permeant ammonium to allow for its selective passage across the membrane. In a recent study, we employed a combination of simulation techniques that suggested ammonium is deprotonated and reprotonated near dehydrative phenylalanine landmarks (F107 and F31, respectively) during its passage from the periplasm to the cytoplasm. At these landmarks, ammonium is forced to maintain a critical number ( approximately 3) of hydrogen bonds, suggesting that the channel controls ammonium (de)protonation by controlling its coordination/hydration. In the work presented here, a free energy-based analysis of ammonium hydration in dilute aqueous solution indicates, explicitly, that at biological pH, the transition from ammonium (NH(4)(+)) to ammonia (NH(3)) occurs when these species are constrained to donate three hydrogen bonds or less. This result demonstrates the viability of the proposal that AmtB indirectly controls ammonium (de)protonation by directly controlling its hydration.     

Ammonium recruitment and ammonia transport by E. coli ammonia channel AmtB

To investigate substrate recruitment and transport across the Escherichia coli Ammonia transporter B (AmtB) protein, we performed molecular dynamics simulations of the AmtB trimer. We have identified residues important in recruitment of ammonium and intraluminal binding sites selective of ammonium, which provide a means of cation selectivity. Our results indicate that A162 guides translocation of an extraluminal ammonium into the pore lumen. We propose a mechanism for transporting the intraluminally recruited proton back to periplasm. Our mechanism conforms to net transport of ammonia and can explain why ammonia conduction is lost upon mutation of the conserved residue D160. We unify previous suggestions of D160 having either a structural or an ammonium binding function. Finally, our simulations show that the channel lumen is hydrated from the cytoplasmic side via the formation of single file water, while the F107/F215 stack at the inner-most part of the periplasmic vestibule constitutes a hydrophobic filter preventing AmtB from conducting water.     

An unusual twin-his arrangement in the pore of ammonia channels is essential for substrate conductance

Amt proteins constitute a class of ubiquitous integral membrane proteins that mediate movement of ammonium across cell membranes. They are homotrimers, in which each subunit contains a narrow pore through which substrate transport occurs. Two conserved histidine residues in the pore have been proposed to be necessary for ammonia conductance. By analyzing 14 engineered polar and non-polar variants of these histidines, in Escherichia coli AmtB, we show that both histidines are absolutely required for optimum substrate conductance. Crystal structures of variants confirm that substitution of the histidine residues does not affect AmtB structure. In a subgroup of Amt proteins, found only in fungi, one of the histidines is replaced by glutamate. The equivalent substitution in E. coli AmtB is partially active, and the structure of this variant suggests that the glutamate side chain can make similar interactions to those made by histidine.     

In vitro analysis of the Escherichia coli AmtB-GlnK complex reveals a stoichiometric interaction and sensitivity to ATP and 2-oxoglutarate

In Escherichia coli, the ammonia channel AmtB and the P(II) signal transduction protein GlnK constitute an ammonium sensory system that effectively couples the intracellular nitrogen regulation system to external changes in ammonium availability. Binding of GlnK to AmtB apparently inactivates the channel, thereby controlling ammonium influx in response to the intracellular nitrogen status. We designed an N-terminally histidine-tagged version of AmtB with a native C-terminal region in order to purify the AmtB-GlnK complex. Purification revealed a stable and direct interaction between AmtB and GlnK, thereby showing for the first time that stability of the complex does not require other proteins. The stoichiometry of the complex was determined by two independent approaches, both of which indicated a 1:1 ratio of AmtB to GlnK. We also showed by mass spectrometry that only the fully deuridylylated form of GlnK co-purifies with AmtB. The purified complex allowed in vitro studies of dissociation and association of AmtB and GlnK. The interaction of GlnK with AmtB is dependent on ATP and is also sensitive to 2-oxoglutarate. Our in vitro data suggest that in vivo association and dissociation of the complex might not only be dependent on the uridylylation status of GlnK but may also be influenced by intracellular pools of ATP and 2-oxoglutarate.     

Function of a separate NH3-pore in Aquaporin TIP2;2 from wheat

Functional analysis of heterologously expressed TaTIP2;2 by means of stopped-flow spectrometric studies provide evidence for water and ammonia conductivity. A series of experiments under increasing pH indicate that the gaseous NH(3), rather than the ammonium ion NH(4)(+) was transported. Results from inhibitor studies strongly suggest that NH(3) is not transported in file with water, but through a separate pathway, which could be supplied by the 5th central pore in a tetramer conformation.     

Detailed mechanism for AmtB conducting NH4+/NH3: molecular dynamics simulations

The mechanism by which the ammonium transporter, AmtB, conducts NH4+/NH3 into the cytoplasm was investigated using conventional molecular dynamics (MD) simulations. These simulations revealed that the neutral molecule, NH3, passes automatically through the channel upon its arrival at the Am2 site and that the function of the channel as a one-way valve for passage of NH3 is not determined by the cytoplasmic exit gate but, rather, by the periplasmic entrance gate of the channel. The NH3, produced by deprotonation of NH4+ at the entrance gate, is spontaneously conveyed to the central region of the channel via a hydrogen-bond network comprising His-168, His-318, Tyr-32, and the NH3 molecule. Finally, the NH3 molecule exits the channel through the exit gate formed by Phe-31, Ile-266, Val-314, and His-318. In addition, Ser-263 is shown to play a critical role in the final stages, acting as a pivoting arm to shunt the NH3 molecule from the cytoplasmic exit gate of the channel out into the cytoplasm. This finding is further supported by another simulation which shows that NH3 fails to be translocated through the channel formed by the Ser-263-Ala mutation. Thus, this study casts new insights on the mechanism of AmtB-mediated passage of NH3 across cellular membranes.     

In vitro interaction between the ammonium transport protein AmtB and partially uridylylated forms of the P(II) protein GlnZ

The ammonium transport family Amt/Rh comprises ubiquitous integral membrane proteins that facilitate ammonium movement across biological membranes. Besides their role in transport, Amt proteins also play a role in sensing the levels of ammonium in the environment, a process that depends on complex formation with cytosolic proteins of the P(II) family. Trimeric P(II) proteins from a variety of organisms undergo a cycle of reversible posttranslational modification according to the prevailing nitrogen supply. In proteobacteria, P(II) proteins are subjected to reversible uridylylation of each monomer. In this study we used the purified proteins from Azospirillum brasilense to analyze the effect of P(II) uridylylation on the protein's ability to engage complex formation with AmtB in vitro. Our results show that partially uridylylated P(II) trimers can interact with AmtB in vitro, the implication of this finding in the regulation of nitrogen metabolism is discussed. We also report an improved expression and purification protocol for the A. brasilense AmtB protein that might be applicable to AmtB proteins from other organisms.     

Electron and atomic force microscopy of the trimeric ammonium transporter AmtB

Escherichia coli AmtB is an archetypal member of the ammonium transporter (Amt) family, a family of proteins that are conserved in all domains of life. Reconstitution of AmtB in the presence of lipids produced large, ordered two-dimensional crystals. From these, a 12 A resolution projection map was determined by cryoelectron microscopy, and high-resolution topographs were acquired using atomic force microscopy. Both techniques showed the trimeric structure of AmtB in which each monomer seems to have a pseudo-two-fold symmetry. This arrangement is likely to represent the in vivo structure. This work provides the first views of the structure of any member of the Amt family.     

Ammonium sensing in Escherichia coli. Role of the ammonium transporter AmtB and AmtB-GlnK complex formation

The Amt proteins are high affinity ammonium transporters that are conserved in all domains of life. In bacteria and archaea the Amt structural genes (amtB) are invariably linked to glnK, which encodes a member of the P(II) signal transduction protein family, proteins that regulate many facets of nitrogen metabolism. We have now shown that Escherichia coli AmtB is inactivated by formation of a membrane-bound complex with GlnK. Complex formation is reversible and occurs within seconds in response to micromolar changes in the extracellular ammonium concentration. Regulation is mediated by the uridylylation/deuridylylation of GlnK in direct response to fluctuations in the intracellular glutamine pool. Furthermore under physiological conditions AmtB activity is required for GlnK deuridylylation. Hence the transporter is an integral part of the signal transduction cascade, and AmtB can be formally considered to act as an ammonium sensor. This system provides an exquisitely sensitive mechanism to control ammonium flux into the cell, and the conservation of glnK linkage to amtB suggests that this regulatory mechanism may occur throughout prokaryotes.     

Molecular dynamics of synthetic leucine-serine ion channels in a phospholipid membrane

Molecular dynamics calculations were carried out on models of two synthetic leucine-serine ion channels: a tetrameric bundle with sequence (LSLLLSL)(3)NH(2) and a hexameric bundle with sequence (LSSLLSL)(3)NH(2). Each protein bundle is inserted in a palmitoyloleoylphosphatidylcholine bilayer membrane and solvated by simple point charge water molecules inside the pore and at both mouths. Both systems appear to be stable in the absence of an electric field during the 4 ns of molecular dynamics simulation. The water motion in the narrow pore of the four-helix bundle is highly restricted and may provide suitable conditions for proton transfer via a water wire mechanism. In the wider hexameric pore, the water diffuses much more slowly than in bulk but is still mobile. This, along with the dimensions of the pore, supports the observation that this peptide is selective for monovalent cations. Reasonable agreement of predicted conductances with experimentally determined values lends support to the validity of the simulations.     

Membrane topology of the Mep/Amt family of ammonium transporters

The Mep/Amt proteins constitute a new family of transport proteins that are ubiquitous in nature. Members from bacteria, yeast and plants have been identified experimentally as high-affinity ammonium transporters. We have determined the topology of AmtB, a Mep/Amt protein from Escherichia coli, as a representative protein for the complete family. This was established using a minimal set of AmtB-PhoA fusion proteins with a complementary set of AmtB-LacZ fusions. These data, accompanied by an in silico analysis, indicate that the majority of the Mep/Amt proteins contain 11 membrane-spanning helices, with the N-terminus on the exterior face of the membrane and the C-terminus on the interior. A small subset, including E. coli AmtB, probably have an additional twelfth membrane-spanning region at the N-terminus. Addition of PhoA or LacZ alpha-peptide to the C-terminus of E. coli AmtB resulted in complete loss of transport activity, as judged by measurements of [14C]-methylammonium uptake. This C-terminal region, along with four membrane-spanning helices, contains multiple residues that are conserved within the Mep/Amt protein family. Structural modelling of the E. coli AmtB protein suggests a number of secondary structural features that might contribute to function, including a putative ammonium binding site on the periplasmic face of the membrane at residue Asp-182. The implications of these results are discussed in relation to the structure and function of the related human Rhesus proteins.     

Of blood, brains and bacteria, the Amt/Rh transporter family: emerging role of Amt as a unique microbial sensor

Members of the Amt/Rh family of transporters are found almost ubiquitously in all forms of life. However, the molecular state of the substrate (NH₃ or NH₄⁺) has been the subject of active debate. At least for bacterial Amt proteins, the model emerging from computational, X-ray crystal and mutational analysis is that NH₄⁺ is deprotonated at the exterior, conducted through the membrane as NH_3, and reprotonated at the cytoplasmic interface. A proton concomitantly is transferred from the exterior to the interior, although the mechanism is unclear. Here we discuss recent evidence indicating that an important function of at least some eukaryotic and bacterial Amts is to act as ammonium sensors and regulate cellular metabolism in response to changes in external ammonium concentrations. This is now well documented in the regulation of yeast pseudohyphal development and filamentous growth. As well, membrane sequestration of GlnK, a PII signal transduction protein, by AmtB has been shown to regulate nitrogenase in some diazotrophs, and nitrogen metabolism in some Gram-positive bacteria. Formation of GlnK–AmtB membrane complexes might have other, as yet undiscovered, regulatory roles. This possibility is emphasized by the discovery in some genomes of genes for chimeric Amts with fusions to various regulatory elements.     

Distinct transport mechanisms in yeast ammonium transport/sensor proteins of the Mep/Amt/Rh family and impact on filamentation

Ammonium transport proteins of the Mep/Amt/Rh family include microbial and plant Mep/Amt members, crucial for ammonium scavenging, and animal Rhesus factors likely involved in ammonium disposal. Recent structural information on two bacterial Mep/Amt proteins has revealed the presence, in the hydrophobic conducting pore, of a pair of preserved histidines proposed to play an important role in substrate conductance, by participating either in NH(4)(+) deprotonation or in shaping the pore. Here we highlight the existence of two functional Mep/Amt subfamilies distinguishable according to whether the first of these histidines is conserved, as in yeast ScMep2, or replaced by glutamate, as in ScMep1. Replacement of the native histidine of ScMep2 with glutamate leads to conversion from ScMep2 to ScMep1-like properties. This includes a two-unit upshift of the optimal pH for transport and an increase of the transport rate, consistent with alleviation of an energy-limiting step. Similar effects are observed when the same substitution is introduced into the Escherichia coli AmtB protein. In contrast to ScMep1, ScMep2 is proposed to play an additional signaling role in the induction of filamentous growth, a dimorphic change often associated with virulence in pathogenic fungi. We show here that the histidine to glutamate substitution in ScMep2 leads to uncoupling of the transport and sensor functions, suggesting that a ScMep2-specific transport mechanism might be responsible for filamentation. Our overall data suggest the existence of two functional groups of Mep/Amt-type proteins with different transport mechanisms and distinct impacts on cell physiology and signaling.     

Membrane sequestration of PII proteins and nitrogenase regulation in the photosynthetic bacterium Rhodobacter capsulatus

Both Rhodobacter capsulatus PII homologs GlnB and GlnK were found to be necessary for the proper regulation of nitrogenase activity and modification in response to an ammonium shock. As previously reported for several other bacteria, ammonium addition triggered the AmtB-dependent association of GlnK with the R. capsulatus membrane. Native polyacrylamide gel electrophoresis analysis indicates that the modification/demodification of one PII homolog is aberrant in the absence of the other. In a glnK mutant, more GlnB was found to be membrane associated under these conditions. In a glnB mutant, GlnK fails to be significantly sequestered by AmtB, even though it appears to be fully deuridylylated. Additionally, the ammonium-induced enhanced sequestration by AmtB of the unmodifiable GlnK variant GlnK-Y51F follows the wild-type GlnK pattern with a high level in the cytoplasm without the addition of ammonium and an increased level in the membrane fraction after ammonium treatment. These results suggest that factors other than PII modification are driving its association with AmtB in the membrane in R. capsulatus.     

Localization of ammonium ions in the minor groove of DNA duplexes in solution and the origin of DNA A-tract bending

Monovalent cation binding sites on nucleic acids in solution can be localized using the isotopically labeled ammonium ion (15NH4+) as a probe in high resolution NMR spectroscopy experiments. The application of this technique to a series of DNA duplexes reveals a preference for the binding of ammonium cations in the minor groove of A-tract sequences. These results are consistent with a recent report which indicates that some solvent electron densities previously identified as water molecules in DNA X-ray crystal structures are partially occupied by sodium ions. The sequence-specific nature of monovalent cation binding sites demonstrated here for A-tract DNA provides an explanation for the origin of sequence-directed bending.     

The conserved carboxy-terminal region of the ammonia channel AmtB plays a critical role in channel function

The ammonium transport (Amt) proteins are a highly conserved family of integral membrane proteins found in eubacteria, archaea, fungi and plants. Genetic, biochemical and bioinformatic analyses suggest that they have a common tertiary structure comprising eleven trans-membrane helices with an N-out, C-in topology. The cytoplasmic C-terminus is variable in length but includes a core region of some 22 residues with considerable sequence conservation. Previous studies have indicated that this C-terminus is not absolutely required for Amt activity but that mutations that alter C-terminal residues can have very marked effects. Using the Escherichia coli AmtB protein as a model system for Amt proteins, we have carried out an extensive site-directed mutagenesis study to investigate the possible role of this region of the protein. Our data indicate that nearly all mutations fall into two phenotypic classes that are best explained in terms of two distinct effects of the C-terminal region on AmtB activity. Residues within the C-terminus play a significant role in normal AmtB function and the C-terminal region might also mediate co-operativity between the three subunits of AmtB.     

Molecular determinants of ammonia and urea conductance in plant aquaporin homologs

Aquaporins and/or aquaglyceroporins regulate the permeability of plant membranes to water and small, uncharged molecules. Using molecular simulations with a plant plasma membrane aquaporin tetramer, the residues in the channel constriction region were identified as the crucial determinants of ammonia and urea conductance. The impact of these residues was experimentally verified using AtPIP2;1 pore mutants. Several, but not all, mutants with a NIP-like selectivity filter promoted yeast growth on urea or ammonia as sole sources of nitrogen. TIP-like mutants conducted urea but not NH(3), and a residue without direct contact to the pore lumen was critical for conduction in the mutants.     

Crystal and molecular structure of the ammonium salt of the dinucleoside monophosphate d(CpG)

The crystal and molecular structure of the ammonium salt of deoxycytidylyl-(3'-5')-deoxyguanosine has been determined from 0.85 A resolution single crystal X-ray diffraction data. The crystals obtained by acetone diffusion technique at -20 degrees C, are orthorhombic, P212121, a = 12.880(2), b = 17444(2) and c = 27.642(2) A. The structure was solved by high resolution Patterson and Fourier methods and refined to R = 0.136. There are two d(CpG) molecules in the asymmetric unit forming a mini left handed Z-DNA helix. This is in contrast to the earlier reported forms of d(CpG) where the molecules form self base paired duplexes. There are two ammonium ions in the asymmetric unit. The major groove NH+4 ion interacts with N7 of guanines through water bridges besides making H-bonded interactions directly with the phosphate oxygen atoms. A second NH+4 ion is found in the minor groove interacting directly with the phosphate oxygen atoms. Symmetry related molecules pack in such a way that the cytosine base stacks on cytosine and guanine base on guanine. Our structure demonstrates that alternating d(CpG) sequences have the ability to adopt the left handed Z-DNA structure even at the dimer level i.e., in a sequence which is only two base pairs long.