Kinetic explanations for the sequence biases observed in the nonenzymatic copying of RNA templates

The identification of nonenzymatic pathways for nucleic acid replication is a key challenge in understanding the origin of life. We have previously shown that nonenzymatic RNA primer extension using 2-aminoimidazole (2AI) activated nucleotides occurs primarily through an imidazolium-bridged dinucleotide intermediate. The reactive nature and preorganized structure of the intermediate increase the efficiency of primer extension but remain insufficient to drive extensive copying of RNA templates containing all four canonical nucleotides. To understand the factors that limit RNA copying, we synthesized all ten 2AI-bridged dinucleotide intermediates and measured the kinetics of primer extension in a model system. The affinities of the ten dinucleotides for the primer/template/helper complexes vary by over 7,000-fold, consistent with nearest neighbor energetic predictions. Surprisingly, the reaction rates at saturating intermediate concentrations still vary by over 15-fold, with the most weakly binding dinucleotides exhibiting a lower maximal reaction rate. Certain noncanonical nucleotides can decrease sequence dependent differences in affinity and primer extension rate, while monomers bridged to short oligonucleotides exhibit enhanced binding and reaction rates. We suggest that more uniform binding and reactivity of imidazolium-bridged intermediates may lead to the ability to copy arbitrary template sequences under prebiotically plausible conditions.     

Chemical primer extension: individual steps of spontaneous replication

The replication of genetic information, as we know it from today's biology, relies on template-directed, polymerase-catalyzed extension of primers. It is known that short stretches of complementary RNA can form on templates in the absence of enzymes. This account summarizes recent work on efficient enzyme-free primer extension, both with 3'-amino-terminal deoxyribonucleotide primers and with primers made of unmodified RNA. Near-quantitative primer extension with half-life times on the order of hours has been demonstrated by using azaoxybenzotriazolides of nucleotides and downstream-binding oligomers. Further, small non-nucleosidic substituents placed on the terminus of the template or the downstream-binding oligomer have been shown to increase the rate and fidelity of primer-extension reactions. Since all four templating bases (A, C, G, T/U) direct sequence-selective primer-extension steps, we feel that there is renewed hope that full, nonenzymatic replication from monomers may eventually be achieved.     

PCR hot start using primers with the structure of molecular beacons (hairpin-like structure)

A new technique of PCR hot start using oligonucleotide primers with a stem–loop structure is developed here. The molecular beacon oligonucleotide structure without any chromophore addition to the ends was used. The 3′-end sequence of the primers was complementary to the target and five or six nucleotides complementary to the 3′-end were added to the 5′-end. During preparation of the reaction mixture and initial heating, the oligonucleotide has a stem–loop structure and cannot serve as an effective primer for DNA polymerase. After heating to the annealing temperature it acquires a linear structure and primer extension can begin.     

Primer-dependent synthesis by poliovirus RNA-dependent RNA polymerase (3Dpol)

Properties of poliovirus RNA-dependent RNA polymerase (3D^pol) including optimal conditions for primer extension, processivity and the rate of dissociation from primer-template (k_off) were examined in the presence and absence of viral protein 3AB. Primer-dependent polymerization was examined on templates of 407 or 1499 nt primed such that fully extended products would be 296 or 1388 nt, respectively. Maximal primer extension was achieved with low rNTP concentrations (50–100 µM) using pH 7 and low (<1 mM) MgCl₂ and KCl (<20 mM) concentrations. However, high activity (about half maximal) was also observed with 500 µM rNTPs providing that higher MgCl₂ levels (3–5 mM) were used. The enhancement observed with the former conditions appeared to result from a large increase in the initial level or active enzyme that associated with the primer. 3AB increased the number of extended primers at all conditions with no apparent change in processivity. The k_off values for the polymerase bound to primer-template were 0.011 ± 0.005 and 0.037 ± 0.006 min^–1 (average of four or more experiments ± SD) in the presence or absence of 3AB, respectively. The decrease in the presence of 3AB suggested an enhancement of polymerase binding or stability. However, binding was tight even without 3AB, consistent with the highly processive (at least several hundred nucleotides) nature of 3D^pol. The results support a mechanism whereby 3AB enhances the ability of 3D^pol to form a productive complex with the primer-template. Once formed, this complex is very stable resulting in highly processive synthesis.     

Competition between bridged dinucleotides and activated mononucleotides determines the error frequency of nonenzymatic RNA primer extension

Nonenzymatic copying of RNA templates with activated nucleotides is a useful model for studying the emergence of heredity at the origin of life. Previous experiments with defined-sequence templates have pointed to the poor fidelity of primer extension as a major problem. Here we examine the origin of mismatches during primer extension on random templates in the simultaneous presence of all four 2-aminoimidazole-activated nucleotides. Using a deep sequencing approach that reports on millions of individual template-product pairs, we are able to examine correct and incorrect polymerization as a function of sequence context. We have previously shown that the predominant pathway for primer extension involves reaction with imidazolium-bridged dinucleotides, which form spontaneously by the reaction of two mononucleotides with each other. We now show that the sequences of correctly paired products reveal patterns that are expected from the bridged dinucleotide mechanism, whereas those associated with mismatches are consistent with direct reaction of the primer with activated mononucleotides. Increasing the ratio of bridged dinucleotides to activated mononucleotides, either by using purified components or by using isocyanide-based activation chemistry, reduces the error frequency. Our results point to testable strategies for the accurate nonenzymatic copying of arbitrary RNA sequences.     

Human DNA polymerase α has a strong mutagenic potential at the initial steps of DNA synthesis

DNA polymerase α (Polα) is essential for DNA replication initiation and makes a notable contribution to genome mutagenesis. The activity and fidelity of Polα during the early steps of DNA replication have not been well studied. Here we show that at the beginning of DNA synthesis, when extending the RNA primer received from primase, Polα is more mutagenic than during the later DNA elongation steps. Kinetic and binding studies revealed substantially higher activity and affinity to the template:primer when Polα interacts with ribonucleotides of a chimeric RNA–DNA primer. Polα activity greatly varies during first six steps of DNA synthesis, and the bias in the rates of correct and incorrect dNTP incorporation leads to impaired fidelity, especially upon the second step of RNA primer extension. Furthermore, increased activity and stability of Polα/template:primer complexes containing RNA–DNA primers result in higher efficiency of mismatch extension.     

Initiation of DNA replication by DNA polymerases from primers forming a triple helix

Despite extensive studies on oligonucleotide-forming triple helices, which were discovered in 1957, their possible relevance in the initiation of DNA replication remains unknown. Using sequences forming triple helices, we have developed a DNA polymerisation assay by using hairpin DNA templates with a 3′ dideoxynucleotide end and an unpaired 5′-end extension to be replicated. The T7 DNA polymerase successfully elongated nucleotides to the expected size of the template from the primers forming triple helices composed of 9–14 deoxyguanosine-rich residues. The triple helix-forming primer required for this reaction has to be oriented parallel to the homologous sequence of the hairpin DNA template. Substitution of the deoxyguanosine residues by N7 deazadeoxyguanosines in the hairpin of the template prevented primer elongation, suggesting that the formation of a triple helix is a prerequisite for primer elongation. Furthermore, DNA sequencing could be achieved with the hairpin template through partial elongation of the third DNA strand forming primer. The T4 DNA polymerase and the Klenow fragment of DNA polymerase I provided similar DNA elongation to the T7 polymerase–thioredoxin complex. On the basis of published crystallographic data, we show that the third DNA strand primer fits within the catalytic centre of the T7 DNA polymerase, thus underlying this new property of several DNA polymerases which may be relevant to genome rearrangements and to the evolution of the genetic apparatus, namely the DNA structure and replication processes.     

Incorporation of reporter molecule-labeled nucleotides by DNA polymerases. I. Chemical synthesis of various reporter group-labeled 2'-deoxyribonucleoside-5'-triphosphates

Fluorescent-labeled DNA is generated through enzymatic incorporation of fluorophore-linked 2′-deoxyribonucleoside-5′-triphosphates (dNTPs) by DNA polymerases. We describe the synthesis of a variety of dye-labeled dNTPs. Amino-linker-modified 5′-triphosphates of all four naturally occurring nucleobases were used as precursors. Commercially available dyes were coupled to the amino function of the side chain. In addition, we attached novel fluorophore derivatives. The labeled products were obtained in at least 96% purity after HPLC purification. Enzymatic incorporation into DNA and subsequent extension of the modified DNA chain were studied. Vent^R exo^– DNA polymerase and a defined template–primer system were used to analyze each dye-labeled dNTP derivative. Our data suggest that the incorporation efficiency depends on the selected dye, the nucleobase or a combination of both.     

The initial step of DNA hairpin folding: a kinetic analysis using fluorescence correlation spectroscopy

Conformational fluctuations of single-stranded DNA (ssDNA) oligonucleotides were studied in aqueous solution by monitoring contact-induced fluorescence quenching of the oxazine fluorophore MR121 by intrinsic guanosine residues (dG). We applied fluorescence correlation spectroscopy as well as steady-state and time-resolved fluorescence spectroscopy to analyze kinetics of DNA hairpin folding. We first characterized the reporter system by investigating bimolecular quenching interactions between MR121 and guanosine monophosphate in aqueous solution estimating rate constants, efficiency and stability for formation of quenched complexes. We then studied the kinetics of complex formation between MR121 and dG residues site-specifically incorporated in DNA hairpins. To uncover the initial steps of DNA hairpin folding we investigated complex formation in ssDNA carrying one or two complementary base pairs (dC–dG pairs) that could hybridize to form a short stem. Our data show that incorporation of a single dC–dG pair leads to non-exponential decays for opening and closing kinetics and reduces rate constants by one to two orders of magnitude. We found positive activation enthalpies independent of the number of dC–dG pairs. These results imply that the rate limiting step of DNA hairpin folding is not determined by loop dynamics, or by mismatches in the stem, but rather by interactions between stem and loop nucleotides.     

Mechanistic studies on DNA damage by minor groove binding copper-phenanthroline conjugates

Copper–phenanthroline complexes oxidatively damage and cleave nucleic acids. Copper bis-phenanthroline and copper complexes of mono- and bis-phenanthroline conjugates are used as research tools for studying nucleic acid structure and binding interactions. The mechanism of DNA oxidation and cleavage by these complexes was examined using two copper–phenanthroline conjugates of the sequence-specific binding molecule, distamycin. The complexes contained either one or two phenanthroline units that were bonded to the DNA-binding domain through a linker via the 3-position of the copper ligand. A duplex containing independently generated 2-deoxyribonolactone facilitated kinetic analysis of DNA cleavage. Oxidation rate constants were highly dependent upon the ligand environment but rate constants describing elimination of the alkali-labile 2-deoxyribonolactone intermediate were not. Rate constants describing DNA cleavage induced by each molecule were 11–54 times larger than the respective oxidation rate constants. The experiments indicate that DNA cleavage resulting from β-elimination of 2-deoxyribonolactone by copper–phenanthroline complexes is a general mechanism utilized by this family of molecules. In addition, the experiments confirm that DNA damage mediated by mono- and bis-phenanthroline copper complexes proceeds through distinct species, albeit with similar outcomes.     

SHAMS: Combining chemical modification of RNA with mass spectrometry to examine polypurine tract-containing RNA/DNA hybrids

Selective 2′-hydroxyl acylation analyzed by primer extension (SHAPE) has gained popularity as a facile method of examining RNA structure both in vitro and in vivo, exploiting accessibility of the ribose 2′-OH to acylation by N-methylisatoic anhydride (NMIA) in unpaired or flexible configurations. Subsequent primer extension terminates at the site of chemical modification, and these products are fractionated by high-resolution gel electrophoresis. When applying SHAPE to investigate structural features associated with the wild-type and analog-substituted polypurine tract (PPT)–containing RNA/DNA hybrids, their size (20–25 base pairs) rendered primer extension impractical. As an alternative method of detection, we reasoned that chemical modification could be combined with tandem mass spectrometry, relying on the mass increment of RNA fragments containing the NMIA adduct (M_r = 133 Da). Using this approach, we demonstrate both specific modification of the HIV-1 PPT RNA primer and variations in its acylation pattern induced by replacing template nucleotides with a non-hydrogen-bonding thymine isostere. Our selective 2′-hydroxyl acylation analyzed by mass spectrometry strategy (SHAMS) should find utility when examining the structure of small RNA fragments or RNA/DNA hybrids where primer extension cannot be performed.     

Determination of protein-DNA binding constants and specificities from statistical analyses of single molecules: MutS-DNA interactions

Atomic force microscopy (AFM) is a powerful technique for examining the conformations of protein–DNA complexes and determining the stoichiometries and affinities of protein–protein complexes. We extend the capabilities of AFM to the determination of protein–DNA binding constants and specificities. The distribution of positions of the protein on the DNA fragments provides a direct measure of specificity and requires no knowledge of the absolute binding constants. The fractional occupancies of the protein at a given position in conjunction with the protein and DNA concentrations permit the determination of the absolute binding constants. We present the theoretical basis for this analysis and demonstrate its utility by characterizing the interaction of MutS with DNA fragments containing either no mismatch or a single mismatch. We show that MutS has significantly higher specificities for mismatches than was previously suggested from bulk studies and that the apparent low specificities are the result of high affinity binding to DNA ends. These results resolve the puzzle of the apparent low binding specificity of MutS with the expected high repair specificities. In conclusion, from a single set of AFM experiments, it is possible to determine the binding affinity, specificity and stoichiometry, as well as the conformational properties of the protein–DNA complexes.     

Quantitative detection of single nucleotide polymorphisms for a pooled sample by a bioluminometric assay coupled with modified primer extension reactions (BAMPER)

A new method for SNP analysis based on the detection of pyrophosphate (PPi) is demonstrated, which is capable of detecting small allele frequency differences between two DNA pools for genetic association studies other than SNP typing. The method is based on specific primer extension reactions coupled with PPi detection. As the specificity of the primer-directed extension is not enough for quantitative SNP analysis, artificial mismatched bases are introduced into the 3′-terminal regions of the specific primers as a way of improving the switching characteristics of the primer extension reactions. The best position in the primer for such artificial mismatched bases is the third position from the primer 3′-terminus. Contamination with endogenous PPi, which produces a large background signal level in SNP analysis, was removed using PPase to degrade the PPi during the sample preparation process. It is possible to accurately and quantitatively analyze SNPs using a set of primers that correspond to the wild-type and mutant DNA segments. The termini of these primers are at the mutation positions. Various types of SNPs were successfully analyzed. It was possible to very accurately determine SNPs with frequencies as low 0.02. It is very reproducible and the allele frequency difference can be determined. It is accurate enough to detect meaningful genetic differences among pooled DNA samples. The method is sensitive enough to detect 14 amol ssM13 DNA. The proposed method seems very promising in terms of realizing a cost-effective, large-scale human genetic testing system.     

Design and synthesis of a photocleavable biotinylated nucleotide for DNA analysis by mass spectrometry

We report here the design, synthesis and evaluation of a novel photocleavable (PC) biotinylated nucleotide analog, dUTP-PC-Biotin, for DNA polymerase extension reaction to isolate DNA products for mass spectrometry (MS) analysis. This nucleotide analog has a biotin moiety attached to the 5-position of 2′-deoxyribouridine 5′-triphosphate via a photocleavable 2-nitrobenzyl linker. We have demonstrated that dUTP-PC-Biotin can be faithfully incorporated by the DNA polymerase Thermo Sequenase into the growing DNA strand in a DNA polymerase extension reaction and that its incorporation does not hinder the addition of the subsequent nucleotide. Therefore, the DNA extension fragments generated by using the dUTP-PC-Biotin can be efficiently isolated by a streptavidin-coated surface and recovered by near-UV light irradiation at room temperature in mild condition for further analysis without using any chemicals or heat. Single and multiple primer extension reactions were performed using the dUTP-PC-Biotin to generate DNA products for MALDI-TOF MS analysis. Such nucleotide analogs that carry a biotin and a photocleavable linker will allow the isolation and purification of DNA products under mild conditions for MS-based genetic analysis by DNA sequencing or multiplex single nucleotide polymorphism (SNP) detection. Furthermore, these nucleotide analogs should also be useful in isolating DNA–protein complexes under non-denaturing conditions.     

Methylglyoxal, an endogenous aldehyde, crosslinks DNA polymerase and the substrate DNA

Methylglyoxal, a known endogenous and environmental mutagen, is a reactive α-ketoaldehyde that can modify both DNA and proteins. To investigate the possibility that methylglyoxal induces a crosslink between DNA and DNA polymerase, we treated a ‘primed template’ DNA and the exonuclease-deficient Klenow fragment (KF^exo–) of DNA polymerase I with methylglyoxal in vitro. When the reaction mixtures were analyzed by SDS–PAGE, we found that methylglyoxal induced a DNA–KF^exo– crosslink. The specific binding complex of KF^exo– and ‘primed template’ DNA was necessary for formation of the DNA–KF^exo– crosslink. Methylglyoxal reacted with guanine residues in the single-stranded portion of the template DNA. When 2′-deoxyguanosine was incubated with Nα-acetyllysine or N-acetylcysteine in the presence of methylglyoxal, a crosslinked product was formed. No other amino acid derivatives tested could generate a crosslinked product. These results suggest that methylglyoxal crosslinks a guanine residue of the substrate DNA and lysine and cysteine residues near the binding site of the DNA polymerase during DNA synthesis and that DNA replication is severely inhibited by the methylglyoxal-induced DNA–DNA polymerase crosslink.     

Capillary electrophoretic separation of nucleotide isomers via complexation with cyclodextrin and borate

The electrophoretic behaviour of monophosphorylated nucleotide isomers can be manipulated using complex-forming reactions with β-cyclodextrin (β-CD) and borate. Resolution of the 2'- and 3'-isomers of nucleotides is possible when the electrophoresis buffer contains 10 mM CD. The effect of β-CD concentration on electrophoretic mobility is used to calculate the formation constant, K, of β-CD—nucleotide complexes. The 3'-isomer of adenosine monophosphate (AMP) forms the strongest complex with β-CD probably as a result of hydrogen bonding between the phosphate group of AMP and hydroxyls of β-CD. In addition, complexation of 5'-nucleotides with borate increases the migration time window and leads to better separation. Complex-forming reactions of guanosine monophosphate and uridine monophosphate are shown to be strongly dependent on buffer pH. A mixture of 12 monophosphorylated nucleotides can be separated in less than 15 min using a buffer of 20 mM borate—10 mM β-CD.     

Simple Detection of the IS6110 Sequence of Mycobacterium tuberculosis Complex in Sputum,Based on PCR with Graphene Oxide

Graphene oxide (GO) has proven to be a satisfactory DNA-sensor platform for applications in enzyme-free signal amplification, fluorescence-based amplification, and nanoparticle-based platforms because of its excellent electrical, thermal, and optical properties. In this study, we designed a novel platform for the fluorescence detection of biomolecules, using a fluorescent dye-labeled primer and GO. We applied this system for the detection of the IS6110 insertion sequence of the Mycobacterium tuberculosis complex (MTB) and evaluated its feasibility for use in molecular diagnostics. Fifty-four sputum specimens were collected at our institution from October 2010 to March 2012. To detect MTB in the samples, we performed PCR amplification of the IS6110 DNA sequence using FAM-labeled primers, after which the PCR amplicon was incubated with GO and the fluorescence was measured. The results were compared with those obtained by conventional real-time quantitative PCR (RQ-PCR). The fluorescence intensity observed increased in a concentration-dependent manner with the FAM-labeled IS6110 amplicon. The results of the PCR-GO system for detecting IS6110 DNA were in good agreement with those obtained with conventional RQ-PCR (kappa statistic = 0.925). The PCR-GO system detected MTB DNA in 23 of 25 RQ-PCR-positive sputum samples (92.0%; 95% CI, 75.0–98.0%), but not in 29 of 29 RQ-PCR-negative sputum samples (100%; 95% CI, 88.1–100.0%). These results indicate the utility of the PCR-GO system in molecular diagnostics.