Dynamic QTL Analysis and Candidate Gene Mapping for Waterlogging Tolerance at Maize Seedling Stage

Soil waterlogging is one of the major abiotic stresses adversely affecting maize growth and yield. To identify dynamic expression of genes or quantitative trait loci (QTL), QTL associated with plant height, root length, root dry weight, shoot dry weight and total dry weight were identified via conditional analysis in a mixed linear model and inclusive composite interval mapping method at three respective periods under waterlogging and control conditions. A total of 13, 19 and 23 QTL were detected at stages 3D|0D (the period during 0–3 d of waterlogging), 6D|3D and 9D|6D, respectively. The effects of each QTL were moderate and distributed over nine chromosomes, singly explaining 4.14–18.88% of the phenotypic variation. Six QTL (ph6-1, rl1-2, sdw4-1, sdw7-1, tdw4-1 and tdw7-1) were identified at two consistent stages of seedling development, which could reflect a continuous expression of genes; the remaining QTL were detected at only one stage. Thus, expression of most QTL was influenced by the developmental status. In order to provide additional evidence regarding the role of corresponding genes in waterlogging tolerance, mapping of Expressed Sequence Tags markers and microRNAs were conducted. Seven candidate genes were observed to co-localize with the identified QTL on chromosomes 1, 4, 6, 7 and 9, and may be important candidate genes for waterlogging tolerance. These results are a good starting point for understanding the genetic basis for selectively expressing of QTL in different stress periods and the common genetic control mechanism of the co-localized traits.     

Conditional and unconditional QTL mapping of drought-tolerance-related traits of wheat seedling using two related RIL populations

For discovering the quantitative trait loci (QTLs) contributing to early seedling growth and drought tolerance during germination, conditional and unconditional analyses of 12 traits of wheat seedlings: coleoptile length, seedling height, longest root length, root number, seedling fresh weight, stem and leaves fresh weight, root fresh weight, seedling dry weight, stem and leaves dry weight, root dry weight, root to shoot fresh weight ratio, root-to-shoot dry weight ratio, were conducted under two water conditions using two F_8:9 recombinant inbred line (RIL) populations. The results of unconditional analysis are as follows: 88 QTLs accounting for 3.33–77.01% of the phenotypic variations were detected on chromosomes 1A, 1B, 1D, 2A, 2B, 2D, 3A, 3B, 4A, 4B, 4D, 5A, 5B, 5D, 6A, 6B, 6D, 7A, 7B and 7D. Among these QTLs, 19 were main-effect QTLs with a contribution rate greater than 10%. The results of the conditional QTL analysis of 12 traits under osmotic stress on normal water conditions were as follows: altogether 22 QTLs concerned with drought tolerance were detected on chromosomes 1B, 2A, 2B, 3B, 4A, 5D, 6A, 6D, 7B, and 7D. Of these QTLs, six were main-effect QTLs. These 22 QTLs were all special loci directly concerned with drought tolerance and most of them could not be detected by unconditional analysis. The finding of these QTLs has an important significance for fine-mapping technique, map-based cloning, and molecular marker-assisted selection of early seedling traits, such as growth and drought tolerance.     

Molecular mapping of quantitative trait loci for drought tolerance in maize plants

Drought tolerance is one of the most important but complex traits of crops. We looked for quantitative trait loci (QTLs) that affect drought tolerance in maize. Two maize inbreds and their advanced lines were evaluated for drought-related traits. A genetic linkage map developed using RFLP markers was used to identify QTLs associated with drought-related traits. Twenty-two QTLs were detected, with a minimum of one and a maximum of nine for drought-related traits. A single-QTL was detected for sugar concentration accounting for about 52.2% of the phenotypic variation on chromosome 6. A single-QTL was also identified for each of the traits root density, root dry weight, total biomass, relative water content, and leaf abscisic acid content, on chromosomes 1 and 7, contributing to 24, 0.2, 0.4, 7, and 19% of the phenotypic variance, respectively. Three QTLs were identified for grain yield on chromosomes 1, 5, and 9, explaining 75% of the observed phenotypic variability, whereas four QTLs were detected for osmotic potential on chromosomes 1, 3, and 9, together accounting for 50% of the phenotypic variance. Nine QTLs were detected for leaf surface area on chromosomes 3 and 9, with various degrees of phenotypic variance, ranging from 25.8 to 42.2%. Four major clusters of QTLs were identified on chromosomes 1, 3, 7, and 9. A QTL for yield on chromosome 1 was found co-locating with the QTLs for root traits, total biomass, and osmotic potential in a region of about 15 cM. A cluster of QTLs for leaf surface area were coincident with a QTL for osmotic potential on chromosome 3. The QTLs for leaf area also clustered on chromosome 9, whereas QTLs for leaf abscisic acid content and relative water content coincided on chromosome 7, 10 cM apart. Co-location of QTLs for different traits indicates potential pleiotropism or tight linkage, which may be useful for indirect selection in maize improvement for drought tolerance.     

Mapping QTLs for phosphorus deficiency tolerance in rice (Oryza sativa L.)

 The amplified fragment length polymorphism (AFLP) technique combined with selective genotyping was used to map quantitative trait loci (QTLs) associated with tolerance for phosphorus (P) deficiency in rice. P deficiency tolerant cultivar IR20 was crossed to IR55178-3B-9-3 (sensitive to P-deficiency) and 285 recombinant inbred lines (RILs) were produced by single-seed descent. The RILs were phenotyped for the trait by growing them in P-sufficient (10.0 mg/l) and P-deficient (0.5 mg/l) nutrient solution and determining their relative tillering ability at 28 days after seeding, and relative shoot dry weight and relative root dry weight at 42 days after seeding. Forty two of each of the extreme RILs (sensitive and tolerant) and the parents were subjected to AFLP analysis. A map consisting of 217 AFLP markers was constructed. Its length was 1371.8 cM with an average interval size of 7.62 cM. To assign linkage groups to chromosomes, 30 AFLP and 26 RFLP markers distributed over the 12 chromosomes were employed as anchor markers. Based on the constructed map, a major QTL for P-deficiency tolerance, designated PHO, was located on chromosome 12 and confirmed by RFLP markers RG9 and RG241 on the same chromosome. Several minor QTLs were mapped on chromosomes 1, 6, and 9. Received: 21 April 1998 / Accepted: 9 June 1998     

QTL mapping analysis of plant height and ear height of maize (Zea mays L.)

Genetic map containing 103 microsatellite loci obtained on 200 F2 plants derived from the cross R15 x 478 was used for quantitative trait loci (QTL) mapping in maize. QTL were characterized in a population of 200 F2:4 lines, derived from selfing the F2 plants, and were evaluated with two replications in two environments. QTL determinations were made from the mean of these two environments. Plant height (PH) and ear height (EH) were measured. Using composite interval mapping (CIM) method, a total of 14 distinct QTLs were identified: nine for PH and five for EH. Additive, partial dominance, dominance, and overdominance actions existed among all detected QTL affecting plant height and ear height. The QTL explained 78.27% of the phenotypic variance of PH and 41.50% of EH. The 14 QTLs displayed mostly dominance or partial dominance gene action and mapped to chromosomes 2, 3, 4, 8 and 9.     

Maize leaf temperature responses to drought: Thermal imaging and quantitative trait loci (QTL) mapping

Leaf temperature has been shown to vary when plants are subjected to water stress conditions. Recent advances in infrared thermography have increased the probability of recording drought tolerant responses more accurately. The aims of this study were to identify the effects of drought on leaf temperature using infrared thermography. Furthermore, the genomic regions responsible for the expression of leaf temperature variation in maize seedlings (Zea mays L.) were explored. The maize inbred lines Zong3 and 87-1 were evaluated using infrared thermography and exhibited notable differences in leaf temperature response to water stress. Correlation analysis indicated that leaf temperature response to water stress played an integral role in maize biomass accumulation. Additionally, a mapping population of 187 recombinant inbred lines (RILs) derived from a cross between Zong3 and 87-1 was constructed to identify quantitative trait loci (QTL) responsible for physiological traits associated with seedling water stress. Leaf temperature differences (LTD) and the drought tolerance index (DTI) of shoot fresh weight (SFW) and shoot dry weight (SDW) were the traits evaluated for QTL analysis in maize seedlings. A total of nine QTL were detected by composite interval mapping (CIM) for the three traits (LTD, RSFW and RSDW). Two co-locations responsible for both RSFW and RSDW were detected on chromosomes 1 and 2, respectively, which showed common signs with their trait correlations. Another co-location was detected on chromosome 9 between LTD and shoot biomass, which provided genetic evidence that leaf temperature affects biomass accumulation. Additionally, the utility of a thermography system for drought tolerance breeding in maize was discussed.     

QTL mapping for test weight by using F<Subscript><Emphasis Type="Bold">2:3</Emphasis></Subscript> population in maize

Test weight is an important trait in maize breeding. Understanding the genetic mechanism of test weight is important for effective selection of maize test weight improvement. In this study, quantitative trait loci (QTL) for maize test weight were identified. In the years 2007 and 2008, a F_2:3 population along with the parents Chang7-2 and Zheng58 were planted in Zhengzhou, People’s Republic of China. Significant genotypic variation for maize test weight was observed in both years. Based on the genetic map containing 180 polymorphic SSR markers with an average linkage distance of 11.0 cM, QTL for maize test weight were analysed by mixed-model composite interval mapping. Five QTL, including four QTL with only additive effects, were identified on chromosomes 1, 2, 3, 4 and 5, and together explained 25.2% of the phenotypic variation. Seven pairs of epistatic interactions were also detected, involving 11 loci distributed on chromosomes 1, 2, 3, 4, 5 and 7, respectively, which totally contributed 18.2% of the phenotypic variation. However, no significant QTL × environment (Q×E) interaction and epistasis × environment interaction effects were detected. The results showed that besides the additive QTL, epistatic interactions also formed an important genetic basis for test weight in maize.     

QTL analysis of cadmium and zinc accumulation in the heavy metal hyperaccumulator Thlaspi caerulescens

Thlaspi caerulescens (Tc; 2n = 14) is a natural Zn, Cd and Ni hyperaccumulator species belonging to the Brassicaceae family. It shares 88% DNA identity in the coding regions with Arabidopsis thaliana (At) (Rigola et al. 2006). Although the physiology of heavy metal (hyper)accumulation has been intensively studied, the molecular genetics are still largely unexplored. We address this topic by constructing a genetic map based on AFLP markers and expressed sequence tags (ESTs). To establish a genetic map, an F(2) population of 129 individuals was generated from a cross between a plant from a Pb/Cd/Zn-contaminated site near La Calamine, Belgium, and a plant from a comparable site near Ganges (GA), France. These two accessions show different degrees of Zn and, particularly, Cd accumulation. We analyzed 181 AFLP markers (of which 4 co-dominant) and 13 co-dominant EST sequences-based markers and mapped them to seven linkage groups (LGs), presumably corresponding to the seven chromosomes of T. caerulescens. The total length of the genetic map is 496 cM with an average density of one marker every 2.5 cM. This map was used for Quantitative Trait Locus (QTL) mapping in the F(2). For Zn as well as Cd concentration in root we mapped two QTLs. Three QTLs and one QTL were mapped for Zn and Cd concentration in shoot, respectively. These QTLs explain 23.8-60.4% of the total variance of the traits measured. We found only one common locus (LG6) for Zn and Cd (concentration in root) and one common locus for shoot and root concentrations of Zn (LG1) and of Cd (LG3). For all QTLs, the GA allele increased the trait value except for two QTLs for Zn accumulation in shoot (LG1 and LG4) and one for Zn concentration in root (LG1).     

Identification of QTLs with main, epistatic and QTL?×?environment interaction effects for salt tolerance in rice seedlings under different salinity conditions

Salt tolerance of rice (Oryza sativa L.) at the seedling stage is one of the major determinants of its stable establishment in saline soil. One population of recombinant inbred lines (RILs, F (2:9)) derived from a cross between the salt-tolerant variety Jiucaiqing and the salt-sensitive variety IR26 was used to determine the genetic mechanism of four salt tolerance indices, seedling height (SH), dry shoot weight (DSW), dry root weight (DRW) and Na/K ratios (Na/K) in roots after 10 days in three salt concentrations (0.0, 0.5 and 0.7 % NaCl). The main effect QTLs (M-QTLs) and epistatic QTLs (E-QTLs) were detected by QTL IciMapping program using single environment phenotypic values. Eleven M-QTLs and 11 E-QTLs were identified for the salt tolerance indices. There were six M-QTLs and two E-QTLs identified for SH, three M-QTLs and five E-QTLs identified for DSW, two M-QTLs and one E-QTL identified for DRW, and three E-QTLs identified for Na/K. The phenotypic variation explained by each M-QTL and E-QTL ranged from 7.8 to 23.9 % and 13.3 to 73.7 %, respectively. The QTL-by-environment interactions were detected by QTLNetwork program in the joint analyses of multi-environment phenotypic values. Six M-QTLs and five E-QTLs were identified. The phenotypic variation explained by each QTL and QTL × environment interaction ranged from 0.95 to 6.90 % and 0.02 to 0.50 %, respectively. By comparing chromosomal positions of these M-QTLs with those previously identified, five M-QTLs qSH1.3, qSH12.1, qSH12.2, qDSW12.1 and qDRW11 might represent novel salt tolerance genes. Five selected RILs with high salt tolerance had six to eight positive alleles of the M-QTLs, indicating that pyramiding by marker-assisted selection (MAS) of M-QTLs can be applied in rice salt tolerance breeding programs.     

小麦幼苗耐热性的QTL定位分析

以小麦DH群体(‘旱选10号’ב鲁麦14’)为材料,在高温(热胁迫)及常温(对照)两种条件下考察小麦幼苗的根干重、苗干重、幼苗生物量、叶片叶绿素含量、叶绿素荧光参数及其耐热指数,并应用基于混合线性模型的复合区间作图法分析幼苗性状及其耐热指数QTL的数量、染色体分布及表达情况,以及QTL与环境的互作效应。结果显示:(1)亲本‘旱选10号’的耐热性明显优于‘鲁麦14’,且杂交后代的耐热性出现超亲分离。(2)控制幼苗耐热相关性状的QTL位点在染色体2D、6B、3A、4A、5A和7A上分布较多,而控制幼苗性状耐热指数的QTL在染色体6A、6B、3A、2D、5A和7A上分布较多,QTL位点在染色体上的分布有区域化的趋势。(3)控制幼苗性状的单个加性QTL和上位性QTL解释的表型变异分别平均为2.48%和2.65%;而控制耐热指数的单个加性QTL和上位性QTL解释的表型变异分别平均为8.84%和1.98%。(4)在热胁迫和对照条件下共检测到与幼苗性状及其耐热指数有关的加性效应QTL 13个和上位性效应QTL 28对,分布在除4D和6D以外的19条染色体上。研究表明,控制幼苗性状的QTL以上位性效应为主,而其耐热指数的QTL以加性效应为主。     

Identification of quantitative trait loci associated with low boron stress that regulate root and shoot growth in Brassica napus seedlings

Brassica napus (Brassicaceae) is among the most important oil crops and a promising biofuel. In the tropics and subtropics, boron (B) deficiency is a major factor limiting Brassica yields. The effect of B on the regulation of root and shoot growth in a doubled haploid (DH) population was evaluated in experiments that utilized hydroponic culture. Strong genetic variability for traits of interest at normal and low B concentrations was demonstrated. Quantitative trait loci (QTL) were analyzed for seven plant growth parameters: increment of primary root length (IPRL), shoot dry weight (SDW), root dry weight (RDW), ratio of RDW to SDW (R/S), shoot B accumulation (SBA), root B accumulation (RBA), and ratio of RBA to SBA [(R/S)BA] in the population. Twenty-seven QTL were detected at normal B levels: four for IPRL, seven for SDW, three for RDW, two for R/S, six for SBA, two for RBA, and three for (R/S)BA. At low B, 18 QTL were detected: four for IPRL, three for SDW, two for RDW, two for R/S, five for SBA, one for RBA, and one for (R/S)BA. Three QTL for adaptability were detected: one A_IPRL and two A_SDW. No putative QTL was detected at both low and normal B. B-related genes were mapped in silico and their locations compared with the QTL identified. The present analyses show the profound and varied effects of B on B. napus and studies on QTL related to B efficiency will help to locate candidate genes and elucidate possible functions of B-efficiency-related QTL.     

Identification of Major QTL for Waterlogging Tolerance Using Genome-Wide Association and Linkage Mapping of Maize Seedlings

To investigate the genetic basis of maize seedling response to waterlogging, we performed a genome-wide association study in 144 maize inbred lines, measuring length, fresh and dry weight of roots and shoots under normal and waterlogged conditions using 45,868 SNPs. This panel was divided into three subgroups based on the population structure results and the LD decay distance was 180 kb. A biparental advanced backcross (AB) population was also used to detect quantitative trait loci (QTL). In a comparison of 16 different models, principal components analysis (PCA/top PC3)?+?K was found to be best for reduction of false-positive associations for further analysis. A whole-genome scan detected four strong peak signals (P <?2.18?×?10^?5) significantly associated with the waterlogging response on chromosomes 5, 6 and 9. SNP4784, SNP200, SNP298, and SNP6314 showed significant association with corresponding traits under waterlogging and explained 14.99–19.36 %, 15.75–17.64 %, 16.08 % and 15.44 % of the phenotypic variation, respectively. The identified SNPs were located in GRMZM2G012046, GRMZM2G009808, GRMZM2G137108 and GRMZM2G369629 (AGPV1). SNP4784 (GRMZM2G012046) was colocalized with the major QTL that was identified with the same traits in the AB population. Forty-seven SNPs significantly associated (P?<?2.18?×?10^?4) with six traits in association mapping were identified and, among these, 33 SNPs were already reported in literature as waterlogging-related traits. These results will help elucidate the genetic basis of differential responses and tolerance to waterlogging stress among maize inbred lines, and provide novel loci for improvement of waterlogging tolerance of maize inbred lines using marker-assisted selection.     

QTL analyses of drought tolerance and growth for a Salix dasyclados × Salix viminalis hybrid in contrasting water regimes

Quantitative trait loci (QTL) for growth traits and water-use efficiency have been identified in two water regimes (normal and drought-treated) and for a treatment index. A tetraploid hybrid F₂ population originating from a cross between a Salix dasyclados clone (SW901290) and a Salix viminalis clone (Jorunn) was used in the study. The growth response of each individual including both above and below ground dry-matter production (i.e. shoot length, shoot diameter, aboveground and root dry weight, internode length, root dry weight/total dry weight, relative growth rate and leaf nitrogen content) was analysed in a replicated block experiment with two water treatments. A composite interval mapping approach was used to estimate number of QTL, the magnitude of the QTL and their position on genetic linkage maps. QTL specific for each treatment and for the treatment index were found, but QTL common across the treatments and the treatment index were also detected. Each QTL explained from 8% to 29% of the phenotypic variation, depending on trait and treatment. Clusters of QTL for different traits were mapped close to each other at several linkage groups, indicating either a common genetic base or tightly linked QTL. Common QTL identified between treatments and treatment index in the complex trait dry weight can be useful tools in the breeding and selection for drought stress tolerance in Salix.     

Quantitative trait loci affecting body weight and fatness from a mouse line selected for extreme high growth.

Quantitative trait loci (QTL) influencing body weight were mapped by linkage analysis in crosses between a high body weight selected line (DU6) and a control line (DUKs). The two mouse lines differ in body weight by 106% and in abdominal fat weight by 100% at 42 days. They were generated from the same base population and maintained as outbred colonies. Determination of line-specific allele frequencies at microsatellite markers spanning the genome indicated significant changes between the lines on 15 autosomes and the X chromosome. To confirm these effects, a QTL analysis was performed using structured F2 pedigrees derived from crosses of a single male from DU6 with a female from DUKs. QTL significant at the genome-wide level were mapped for body weight on chromosome 11; for abdominal fat weight on chromosomes 4, 11, and 13; for abdominal fat percentage on chromosomes 3 and 4; and for the weights of liver on chromosomes 4 and 11, of kidney on chromosomes 2 and 9, and of spleen on chromosome 11. The strong effect on body weight of the QTL on chromosome 11 was confirmed in three independent pedigrees. The effect was additive and independent of sex, accounting for 21-35% of the phenotypic variance of body weight within the corresponding F2 populations. The test for multiple QTL on chromosome 11 with combined data from all pedigrees indicated the segregation of two loci separated by 36 cM influencing body weight.     

QTL Mapping of Agronomic Waterlogging Tolerance Using Recombinant Inbred Lines Derived from Tropical Maize (Zea mays L) Germplasm

Waterlogging is an important abiotic stress constraint that causes significant yield losses in maize grown throughout south and south-east Asia due to erratic rainfall patterns. The most economic option to offset the damage caused by waterlogging is to genetically incorporate tolerance in cultivars that are grown widely in the target agro-ecologies. We assessed the genetic variation in a population of recombinant inbred lines (RILs) derived from crossing a waterlogging tolerant line (CAWL-46-3-1) to an elite but sensitive line (CML311-2-1-3) and observed significant range of variation for grain yield (GY) under waterlogging stress along with a number of other secondary traits such as brace roots (BR), chlorophyll content (SPAD), % stem and root lodging (S&RL) among the RILs. Significant positive correlation of GY with BR and SPAD and negative correlation with S&RL indicated the potential use of these secondary traits in selection indices under waterlogged conditions. RILs were genotyped with 331 polymorphic single nucleotide polymorphism (SNP) markers using KASP (Kompetitive Allele Specific PCR) Platform. QTL mapping revealed five QTL on chromosomes 1, 3, 5, 7 and 10, which together explained approximately 30% of phenotypic variance for GY based on evaluation of RIL families under waterlogged conditions, with effects ranging from 520 to 640 kg/ha for individual genomic regions. 13 QTL were identified for various secondary traits associated with waterlogging tolerance, each individually explaining from 3 to 14% of phenotypic variance. Of the 22 candidate genes with known functional domains identified within the physical intervals delimited by the flanking markers of the QTL influencing GY and other secondary traits, six have previously been demonstrated to be associated with anaerobic responses in either maize or other model species. A pair of flanking SNP markers has been identified for each of the QTL and high throughput marker assays were developed to facilitate rapid introgression of waterlogging tolerance in tropical maize breeding programs.     

Genetic linkage map construction and QTL mapping of cadmium accumulation in radish (Raphanus sativus L.)

Cadmium (Cd) is a widespread soil pollutant and poses a significant threat to human health via the food chain. Large phenotypic variations in Cd concentration of radish roots and shoots have been observed. However, the genetic and molecular mechanisms of Cd accumulation in radish remain to be elucidated. In this study, a genetic linkage map was constructed using an F(2) mapping population derived from a cross between a high Cd-accumulating cultivar NAU-Dysx and a low Cd-accumulating cultivar NAU-Yh. The linkage map consisted of 523 SRAP, RAPD, SSR, ISSR, RAMP, and RGA markers and had a total length of 1,678.2 cM with a mean distance of 3.4 cM between two markers. All mapped markers distributed on nine linkage groups (LGs) having sizes between 134.7 and 236.8 cM. Four quantitative trait loci (QTLs) for root Cd accumulation were mapped on LGs 1, 4, 6, and 9, which accounted for 9.86 to 48.64 % of all phenotypic variance. Two QTLs associated with shoot Cd accumulation were detected on LG1 and 3, which accounted for 17.08 and 29.53 % of phenotypic variance, respectively. A major-effect QTL, qRCd9 (QTL for root Cd accumulation on LG9), was identified on LG 9 flanked by NAUrp011_754 and EM5me6_286 markers with a high LOD value of 23.6, which accounted for 48.64 % of the total phenotypic variance in Cd accumulation of F(2) lines. The results indicated that qRCd9 is a novel QTL responsible for controlling root Cd accumulation in radish, and the identification of specific molecular markers tightly linked to the major QTL could be further applied for marker-assisted selection (MAS) in low-Cd content radish breeding program.     

Internodal elongation under submergence in the Amazonian wild rice species <Emphasis Type="Italic">Oryza glumaepatula</Emphasis>: the growth response is induced by hypoxia but not by ethylene

Phosphate (Pi) plays important roles in plant development and architecture. With the goal of identifying genomic regions that influence tolerance to Pi deficiency (TPDE) in hybrid rice (Oryza sativa L.), quantitative trait loci (QTL) were mapped using recombinant inbred lines (RILs) that were derived from a cross between tolerant ‘XieqingzaoB’ (XB) and susceptible ‘Zhonghui9308’. Six TPDE-related traits, including the root length, root dry weight, tillers number, shoot dry weight, total plant dry weight and root-to-shoot ratio, were evaluated for QTL analysis during both the tillering and heading stages. A correlation analysis showed that most of the traits were correlated with each other. Twenty-one additive QTL were detected and jointly explained between 10–49% of the trait variance, tending to cluster on chromosomes 4, 6, 10 and 11. Three QTL, qTPDE4 ^XB , qTPDE10 ^XB and qTPDE11.3 ^XB , were validated by the phenotypic evaluation using near isogenic lines (NILs, BC₄F₃) during the seedling stage. qTPDE4 ^XB showed the most stable tolerance against Pi deficiency. These QTL will enrich the genetic resources and accelerate hybrid rice breeding against Pi deficiency.     

Root and shoot traits responses to phosphorus deficiency and QTL analysis at seedling stage using introgression lines of rice

Phosphorous （P） deficiency is a major restraint factor for crop production and plants have developed several mechanisms to adapt to low P stress. In this study, a set of 271 introgression lines （ILs） were used to characterize the responses of seedlings to low P availability and to identify QTLs for root traits, biomass, and plant height under P-deficiency and P-sufficiency conditions. Plant height, total dry weight, shoot dry weight, and root number were inhibited under P-deficiency, whereas maximum root length （MRL） and root-shoot ratio （RS） were induced by P-deficiency stress. Relative MRL （RMRL, the ratio of MRL under P-deficiency to MRL under P-sufficiency con- dition） and relative RS （RRS） were used to evaluate P-deficiency tolerance at the seedling stage. A total of 24 additive QTLs and 29 pairs of epistatic QTLs were detected, but only qRN4 was detected in both conditions. This suggested that different mechanisms may exist in both P supply levels. QTLs for adaptive traits （RMRL, RRS, RRV, and RRDW） and qRN4 consistently expressed to increase trait stability may contribute to P-deficiency tolerance. Twelve intervals were cluster regions of QTLs for P-deficiency tolerance, and one QTL （qRRSS） showed pleiotropic effects on P-deficiency tolerance and drought tolerance. These interesting QTLs can be used in marker-assisted breeding through the target ILs.     

Genetic analysis of cold-tolerance of photosynthesis in maize

The genetic basis of cold-tolerance was investigated by analyzing the quantitative trait loci (QTL) of an F₂:3 population derived from a cross between two lines bred for contrasting cold-tolerance using chlorophyll fluorescence as a selection tool. Chlorophyll fluorescence parameters, CO₂ exchange rate, leaf greenness, shoot dry matter and shoot nitrogen content were determined in plants grown under controlled conditions at 25/22 °C or 15/13 °C (day/night). The analysis revealed the presence of 18 and 19 QTLs (LOD > 3.5) significantly involved in the variation of nine target traits in plants grown at 25/22 °C and 15/13 °C, respectively. Only four QTLs were clearly identified in both temperatures regimes for the same traits, demonstrating that the genetic control of the performance of the photosynthetic apparatus differed, depending on the temperature regime. A major QTL for the cold-tolerance of photosynthesis was identified on chromosome 6. This QTL alone explained 37.4 of the phenotypic variance in the chronic photoinhibition at low temperature and was significantly involved in the expression of six other traits, including the rate of carbon fixation and shoot dry matter accumulation, indicating that the tolerance to photoinhibition is a key factor in the tolerance of maize to low growth temperature. An additional QTL on chromosomes 2 corresponded to a QTL identified previously in another population, suggesting some common genetic basis of the cold-tolerance of photosynthesis in different maize germplasms.     

Seed Film Coating with Uniconazole Improves Rape Seedling Growth in Relation to Physiological Changes Under Waterlogging Stress

Waterlogging is an important constraint of global production of rape. The effects of seed film coating with 0.0075% uniconazole on the growth and physiology was investigated using seedlings from three varieties of rape (Brassica napus L.) subjected to waterlogging. While seed coating with uniconazole had no significant effect on germination percentage during waterlogging stress, it enhanced root vigour, increased root length, root volume and root dry weight. It also significantly enhanced leaf dry weight and ratio of root to shoot, but induced a significant decrease in shoot height and stem dry weight. Seed film coating with uniconazole also significantly increased the activities of the antioxidant enzymes, POD, CAT and SOD, and soluble sugar concentration during waterlogging. Thus, it suggests that seed film coating with uniconazole at a suitable concentration can improve rape seedling growth and increase seedling establishment during waterlogging.