Molecular characterisation of the colicin E2 operon and identification of its products

Summary The DNA sequence of the entire colicin E2 operon was determined. The operon comprises the colicin activity gene, ceaB, the colicin immunity gene, ceiB, and the lysis gene, celB, which is essential for colicin release from producing cells. A potential LexA binding site is located immediately upstream from ceaB, and a rho-independent terminator structure is located immediately downstream from celB. A comparison of the predicted amino acid sequences of colicin E2 and cloacin DF13 revealed extensive stretches of homology. These colicins have different modes of action and recognise different cell surface receptors; the two major regions of heterology at the carboxy terminus, and in the carboxy-terminal end of the central region probably correspond to the catalytic and receptor-recognition domains, respectively. Sequence homologies between colicins E2, A and E1 were less striking, and the colicin E2 immunity protein was not found to share extensive homology with the colicin E3 or cloacin DF13 immunity proteins. The lysis proteins of the ColE2, ColE1 and CloDF13 plasmids are almost identical except in the aminoterminal regions, which themselves have overall similarity with lipoprotein signal peptides. Processing of the ColE2 prolysis protein to the mature form was prevented by globomycin, a specific inhibitor of the lipoprotein signal peptidase. The mature ColE2 lysis protein was located in the cell envelope. The results are discussed in terms of the functional organisation of the colicin operons and the colicin proteins, and the way in which colicins are released from producing cells.     

A hybrid toxin from bacteriophage f1 attachment protein and colicin E3 has altered cell receptor specificity.

A hybrid protein was constructed in vitro which consists of the first 372 amino acids of the attachment (gene III) protein of filamentous bacteriophage f1 fused, in frame, to the carboxy-terminal catalytic domain of colicin E3. The hybrid toxin killed cells that had the F-pilus receptor for phage f1 but not F- cells. The activity of the hybrid protein was not dependent upon the presence of the colicin E3 receptor, BtuB protein. The killing activity was colicin E3 specific, since F+ cells expressing the colicin E3 immunity gene were not killed. Entry of the hybrid toxin was also shown to depend on the products of tolA, tolQ, and tolR which are required both for phage f1 infection and for entry of E colicins. TolB protein, which is required for killing by colicin E3, but not for infection by phage f1, was also found to be necessary for the killing activity of the hybrid toxin. The gene III protein-colicin E3 hybrid was released from producing cells into the culture medium, although the colicin E3 lysis protein was not present in those cells. The secretion was shown to depend on the 18-amino-acid-long gene III protein signal sequence. Deletion of amino acids 3 to 18 of the gene III moiety of the hybrid protein resulted in active toxin, which remained inside producing cells unless it was mechanically released.     

Genes affecting coliphage BF23 and E colicin sensitivity in Salmonella typhimurium.

Rough strains of Salmonella typhimurium were sensitive to coliphage BF23. Spontaneous mutants resistant to BF23 (bfe) were isolated, and the trait was mapped using phage P1. The bfe gene in S. typhimurium was located between argF (66% co-transducible) and rif (61% co-transducible). The BF23-sensitive S. typhimurium strains were not sensitive to the E colicins. Cells of these rough strains absorbed colicin, as measured by loss of E2 or E3 killing units from colicin solutions and by specific adsorption of 125I-colicin E2 to bfe+ cells. Sensitivity to colicins E1, E2, and E3 was observed in a S. typhimurium strain carrying the F'8 gal+ episome. This episome complemented the tolB mutation of Escherichia coli. We conclude that the bfe+ protein satisfies requirements for adsorption of both phage BF23 and the E colicins. In addition, expression of a gene from E. coli, possibly tolB, is necessary for efficient E colicin killing of S. typhimurium.     

Genetics of Sensitivity of Salmonella Species to Colicin M and Bacteriophages T5, T1, and ES18

Nearly all of 62 strains of Salmonella paratyphi B were sensitive to colicin M and phage T5 but resistant to phages T1 and ES18 and to colicin B. All tested S. typhimurium strains were resistant to colicin M and phage T5, and many were sensitive to phage ES18. A rough S. typhimurium LT2 strain given the tonA region of Escherichia coli or S. paratyphi B became sensitive to colicin M and phage T5. We infer that the tonA allele of S. paratyphi B, like that of E. coli, determines an outer membrane protein that adsorbs T5 and colicin M but not phage ES18, whereas the S. typhimurium allele determines a protein able to adsorb only ES18. The partial T1 sensitivity of a rough LT2 strain with a tonA allele from E. coli or S. paratyphi B and also the tonB(+) phentotype of an E. coli B trp-tonB Delta mutant carrying an F' trp of LT2 origin showed that S. typhimurium LT2 has a tonB allele like that of E. coli with respect to determination of sensitivity to colicins and phage T1. Rough S. paratyphi B, although T5 sensitive, remained resistant to T1 even when given F' tonB(+) of E. coli origin. Classes of Salmonella mutants selected as resistant to colicin M included: T5-resistant mutants, probably tonA(-); mutants unchanged except for M resistance, perhaps tolerant; and Exb(+) mutants, producing a colicin inhibitor (presumably enterochelin). Some Exb(+) mutants were resistant to a bacteriocin inactive on E. coli but active on all tested S. paratyphi B and S. typhimurium strains (and on nearly all other tested Salmonella). A survey showed sensitivity to colicin M in several other species of Salmonella.     

DNA and amino acid sequence analysis of structural and immunity genes of colicins Ia and Ib.

The nucleotide sequences for colicin Ia and colicin Ib structural and immunity genes were determined. The two colicins each consist of 626 amino acid residues. Comparison of the two sequences along their lengths revealed that the two colicins are nearly identical in the N-terminal 426 amino acid residues. The C-terminal 220 amino acid residues of the colicins are only 60% identical, suggesting that this is the region most likely recognized by their cognate immunity proteins. The predicted proteins for the colicin immunity proteins would contain 111 amino acids for the colicin Ia immunity protein and 115 amino acids for the colicin Ib immunity protein. The colicin immunity proteins have no detectable DNA or amino acid homology but do exhibit a conservation of overall hydrophobicity. The colicin immunity genes lie distal to and in opposite orientation to the colicin structural genes. The colicin Ia immunity protein was purified to apparent homogeneity by a combination of isoelectric focusing and preparative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The N-terminal amino acid sequence of the purified Ia immunity protein was determined and was found to be in perfect agreement with that predicted from the DNA sequence of its structural gene. The Ia immunity protein is not a processed membrane protein.     

The effect of supercoiling of DNA from colicinogenic plasmids on the expression of col, imm and lys genes

The expression of colicin genes is controlled by the SOS-system (Lex A repressor) and the adenylate-cyclase system (cAMP-CAP complex). The effect of plasmid DNA supercoiling on the expression of the operons of colicins E1, E2, and E3 has been studied by using E. coli minicells. It has been shown for the colicin E1 operon that it is the promoter that is influenced by supercoiling: an increase in negative supercoiling elevates the expression and, vice versa, DNA relaxation reduces the expression. The effect of supercoiling on gene activity of the colicin E1 immunity protein has not been observed, which may be due to the specific orientation of this gene. With the two other colicins supercoiling affects the expression of all genes which constitute the operon. The regulation of the colicin operon expression has been confirmed to occur at three levels: by the LexA protein, by the cAMP-CAP complex, and by the plasmid DNA supercoiling.     

Nucleotide sequences from the colicin E8 operon: homology with plasmid ColE2-P9

The primary structures of the immunity (Imm) and lysis (Lys) proteins, and the C-terminal 205 amino acid residues of colicin E8 were deduced from nucleotide sequencing of the 1,265 bp ClaI-PvuI DNA fragment of plasmid ColE8-J. The gene order is col-imm-lys confirming previous genetic data. A comparison of the colicin E8 peptide sequence with the available colicin E2-P9 sequence shows an identical receptor-binding domain but 20 amino acid replacements and a clustering of synonymous codon usage in the nuclease-active region. Sequence homology of the two colicins indicates that they are descended from a common ancestral gene and that colicin E8, like colicin E2, may also function as a DNA endonuclease. The native ColE8 imm (resident copy) is 258 bp long and is predicted to encode an acidic protein of 9,604 mol. wt. The six amino acid replacements between the resident imm and the previously reported non-resident copy of the ColE8 imm ([E8 imm]) found in the ribonuclease-producing ColE3-CA38 plasmid offer an explanation for the incomplete protection conferred by [E8 Imm] to exogenously added colicin E8. Except for one nucleotide and amino acid change in the putative signal peptide sequence, the ColE8 lys structure is identical to that present in ColE2-P9 and ColE3-CA38.     

Structural and functional organization of the colicin operon in the ColD-CA23 plasmid

The organization of the genes involved in colicin D synthesis was studied. These are colicin, immunity and lysis genes. The nucleotide sequence of the immunity gene, its structural and regulatory regions were determined. This gene was shown to be located next to the colicin gene on the same strand and followed by the lysis gene. When colicin synthesis is induced with mitomycin C the immunity gene is transcribed from the general SOS-dependent promotor as a part of the colicin operon. However it has its own SOS-independent promotor in normal growth conditions. A high homology in amino acid sequences of Co1D lysis protein and that of Co1E1, Co1E2, Co1E3, Co1DF13, Co1A was revealed. A detailed scheme of Co1D-CA23 colicin operon structural organization is suggested.     

Identification of a unique specificity determinant of the colicin E3 immunity protein.

Plasmid immunity to a nuclease-type colicin is defined by the specific binding of an immunity (or inhibitor) protein, Imm, to the C-terminal nuclease domain, T2A, of the colicin molecule. Whereas most regions of colicin operons exhibit extensive sequence identity, the small plasmid region encoding T2A and Imm is exceptionally varied. Since immunity is essential for the survival of the potentially lethal colicin plasmid (Col), we inferred that T2A and Imm must have co-evolved, retaining their mutual binding specificities. To evaluate this co-evolution model for the col and imm genes of ColE3 and ColE6, we attempted to obtain a stabilized clone from a plasmid which had been destabilized with a non-cognate immunity gene. A hybrid Col, in which the immE3 gene of the ColE3 was replaced with immE6 from ColE6, was lethal to the host cells upon SOS induction. From among this suicidal cell population, we isolated a stabilized, i.e., evolved, clone which produced colicin E3 (E3) stably and exhibited immunity to E3. This change arose from only a single mutation in ImmE6, from Trp48 to Cys, the same residue as in the ImmE3 sequence. In addition, we constructed a series of chimeric genes through homologous recombination between immE3 and immE6. Characterization of these chimeric immunity genes confirmed the above finding that colicins E3 and E6 are mostly distinguished by only Cys48 of the ImmE3 protein.     

A physiological role for DNA supercoiling in the anaerobic regulation of colicin gene expression

Summary The mechanism of anaerobic regulation of synthesis of colicins E1, E2, E3, K and D was studied. It was found that anaerobiosis significantly increases expression of the genes for colicins E1, E2, E3, K, and D. Experiments with novobiocin (a DNA gyrase inhibitor) showed that colicin synthesis in minicells and derepressed colicin synthesis in cells are dramatically reduced by relaxation of DNA supercoiling. A good correlation was observed between the levels of colicin synthesis and plasmid DNA supercoiling and the degree of aeration of the cultures. Thus, the regulation of colicin gene expression in response to a change in aeration appears to be mediated by environmentally induced variations in DNA supercoiling.     

Functional stability of the bfe and tonB gene products in Escherichia coli.

The expression of several functional properties of the products of the bfe and tonB genes in Escherichia coli was measured after the specific termination of the synthesis of the products of these genes. This was accomplished by the use of a temperature-sensitive amber suppressor mutation, which allowed control, by manipulation of the growth temperature, of the level of product formed from suppressible mutant alleles of the bfe or tonB gene. The bfe product is an outer membrane receptor protein for vitamin B12, the E-colicins, and bacteriophage BF23. The identity of the tonB product is unknown, but it is necessary for a subsequent step of uptake of vitamin B12, iron chelates, all of the group B colicins, and bacteriophages T1 and phi 80. Results from a different experimental system had shown that the termination of expression of the bfe locus was rapidly followed by loss of sensitivity to colicins E2 and E3 and, subsequently, to bacteriophage BF23. This was confirmed with this experimental system. Receptors that were no longer functional for colicin or phage uptake remained fully effective for B12 uptake, showing that receptors are stable on the cell surface. This supports previous contentions for the presence of different functional states for colicin receptors. The functional properties of the tonB product, measured by B12 uptake or sensitivity to the group B colicin D, were unstable, declining extensively after cessation of its synthesis.     

Genetics of colicin E susceptibility inCitrobacter freundii

The insensitivity ofCitrobacter freundii to the E colicins is based on tolerance to colicin E1 and resistance to colicins E2 and E3. Spontaneous colicin A resistant mutants ofC. freundii also lost their colicin E1 receptor function. Sensitivity to colicin E1 can be induced by F′gal ⁺ tol ⁺ plasmids, thetol A⁺ gene product of which is responsible for this effect. Receptor function for colicins E2 and E3 is induced by theE. coli F′14bfe ⁺ plasmid, which is also able to enhance notably the receptor capacity for colicin E1. Thebfe ⁺ gene product ofE. coli, which is responsible for these phenomena, also restores the receptor function for colicin A and E1 in colicin A resistant mutants ofC. freundii. All results show that there is a remarkable difference between theE. coli bfe ⁺ gene product and thebfe ⁺ gene product ofC. freundii and also between thetol A⁺ gene products of these strains. The sensitivity to phage BF23 parallels the sensitivity to colicins E2 and E3 and is also induced by the F′14bfe ⁺ plasmid.     

Characterization of Colicin S4 and Its Receptor, OmpW, a Minor Protein of the Escherichia coli Outer Membrane

Analysis of the nucleotide sequence of an Escherichia coli colicin S4 determinant revealed 76% identity to the pore-forming domain of the colicin A protein, 77% identity to the colicin A immunity protein, and 82% identity to the colicin A lysis protein. The N-terminal region, which is responsible for the Tol-dependent uptake of colicin S4, has 94% identity to the N-terminal region of colicin K. By contrast, the predicted receptor binding domain shows no sequence similarities to other colicins. Mutants that lacked the OmpW protein were resistant to colicin S4.     

The pyocins of Pseudomonas aeruginosa

Pyocins are produced by more than 90% of Pseudomonas aeruginosa strains and each strain may synthesise several pyocins. The pyocin genes are located on the P. aeruginosa chromosome and their activities are inducible by mutagenic agents such as mitomycin C. Three types of pyocins are described. (i). R-type pyocins resemble non-flexible and contractile tails of bacteriophages. They provoke a depolarisation of the cytoplasmic membrane in relation with pore formation. (ii). F-type pyocins also resemble phage tails, but with a flexible and non-contractile rod-like structure. (iii). S-type pyocins are colicin-like, protease-sensitive proteins. They are constituted of two components. The large component carries the killing activity (DNase activity for pyocins S1, S2, S3, AP41; tRNase for pyocin S4; channel-forming activity for pyocin S5). It interacts with the small component (immunity protein). The synthesis of pyocins starts when a mutagen increases the expression of the recA gene and activates the RecA protein, which cleaves the repressor PrtR, liberating the expression of the protein activator gene prtN. R and F-pyocins are derived from an ancestral gene, with similarities to the P2 phage family and the lambda phage family, respectively. The killing domains of S1, S2, AP41 pyocins show a close evolutionary relationship with E2 group colicins, S4 pyocin with colicin E5, and S5 pyocin with colicins Ia, and Ib.     

Assembly of colicin genes from a few DNA fragments. Nucleotide sequence of colicin D

The nucleotide sequence of a 2.4 kb Dral-EcoRV fragment of pColD-CA23 DNA was determined. The segment of DNA contained the colicin D structural gene (cda) and the colicin D immunity gene (cdi). From the nucleotide sequence it was deduced that colicin D had a molecular weight of 74683D and that the immunity protein had a molecular weight of 10057D. The amino-terminal portion of colicin D was found to be 96% homologous with the same region of colicin B. Both colicins share the same cell-surface receptor, FepA, and require the TonB protein for uptake. A putative TonB box pentapeptide sequence was identified in the amino terminus of the colicin D protein sequence. Since colicin D inhibits protein synthesis, it was unexpected that no homology was found between the carboxy-terminal part of this colicin and that of the protein synthesis inhibiting colicin E3 and cloacin DF13. This could indicate that colicin D does not function in the same manner as the latter two bacteriocins. The observed homology with colicin B supports the domain structure concept of colicin organization. The structural organization of the colicin operon is discussed. The extensive amino-terminal homology between colicins D and B, and the strong carboxy-terminal homology between colicins B, A, and N suggest an evolutionary assembly of colicin genes from a few DNA fragments which encode the functional domains responsible for colicin activity and uptake.     

Plasmid pColBM-Cl139 does not encode a colicin lysis protein but contains sequences highly homologous to the D protein (resolvase) and the oriV region of the miniF plasmid

Colicins are usually released from producing cells by so-called lysis proteins. No sequence homologous to the structurally very similar colicin lysis genes was found in the gene cluster cmi cma cbi cba, which determines the activity and immunity proteins of colicin B and M on pColBM-Cl139. Instead, the region upstream of cmi contained sequences that showed 91% homology to the structural gene of protein D (resolvase) and 75.5% homology to the rfsF sequence of the Escherichia coli miniF plasmid. It is concluded that colicins B and M are not released via the activity of lysis proteins and that the highly homologous regions encode a resolvase and its target respectively.     

Mechanism of export of colicin E1 and colicin E3.

The mechanism of export of colicins E1 and E3 was examined. Neither colicin E1, colicin E3, Nor colicin E3 immunity protein appears to be synthesized as a precursor protein with an amino-terminal extension. Instead, the colicins, as well as the colicin E3 immunity protein, appear to leave the cells where they are made, long after their synthesis, by a nonspecific mechanism which results in increased permeability of the producing cells. Induction of ColE3-containing cells with mitomycin C leads to actual lysis of those cells, as some time after synthesis of the colicin E3 and its immunity protein has been completed. Induction of ColE1-containing cells results in increased permeability of the cells, but not in actual lysis, and most of the colicin E1 produced never leaves the producing cells. Intracellular proteins such as elongation factor G can be found outside of colicinogenic cells after mitomycin C induction, along with the colicin. Until substantial increases in permeability occur, most of the colicin remains cell associated, in the soluble cytosol, rather than in a membrane-associated form.     

Nucleotide sequence of the colicin B activity gene cba: consensus pentapeptide among TonB-dependent colicins and receptors.

Colicin B formed by Escherichia coli kills sensitive bacteria by dissipating the membrane potential through channel formation. The nucleotide sequence of the structural gene (cba) which encodes colicin B and of the upstream region was determined. A polypeptide consisting of 511 amino acids was deduced from the open reading frame. The active colicin had a molecular weight of 54,742. The carboxy-terminal amino acid sequence showed striking homology to the corresponding channel-forming region of colicin A. Of 216 amino acids, 57% were identical and an additional 19% were homologous. In this part 66% of the nucleotides were identical in the colicin A and B genes. This region contained a sequence of 48 hydrophobic amino acids. Sequence homology to the other channel-forming colicins, E1 and I, was less pronounced. A homologous pentapeptide was detected in colicins B, M, and I whose uptake required TonB protein function. The same consensus sequence was found in all outer membrane proteins involved in the TonB-dependent uptake of iron siderophores and of vitamin B12. Upstream of cba a sequence comprising 294 nucleotides was identical to the sequence upstream of the structural gene of colicin E1, with the exception of 43 single-nucleotide replacements, additions, or deletions. Apparently, the region upstream of colicins B and E1 and the channel-forming sequences of colicins A and B have a common origin.     

Analysis of a cloned colicin Ib gene: complete nucleotide sequence and implications for regulation of expression.

The complete nucleotide sequence of a 2,971 base pair EcoRI fragment carrying the structural gene for colicin Ib has been determined. The length of the gene is 1,881 nucleotides which is predicted to produce a protein of 626 amino acids and of molecular weight 71,364. The structural gene is flanked by likely promoter and terminator signals and in between the promoter and the ribosome binding site is an inverted repeat sequence which resembles other sequences known to bind the LexA protein. Further analysis of the 5' flanking sequences revealed a second region which may act either as a second LexA binding site and/or in the binding of cyclic AMP receptor protein. Comparison of the predicted amino acid sequence of colicin Ib with that of colicins A and E1 reveals localised homology. The implications of these similarities in the proteins and of regulation of the colicin Ib structural gene are discussed.