Isolation and characterisation of surface active compound-producing bacteria from hydrocarbon-contaminated environments

Bacteria able to produce surface active compounds (SACs) were isolated from hydrocarbon-contaminated environments. The phylogenetic diversity of the isolates was evaluated by 16S rRNA gene analysis. The production of bioemulsifiers and biosurfactants was determined on strains representative of 18 different bacterial genera. Cupriavidus sp. BSNC28C produced extracellular biosurfactants which reduce the surface tension into the culture medium up to 37.1 mN m⁻¹. Sixteen strains, belonging to 11 different genera, released extracellular emulsifiers able to stabilise oil–water emulsions. Among them, the strains Bradyrhizobium sp. BSNC30A and Bosea sp. BSNC5B showed emulsification activities comparable to those of synthetic surfactants. Overall, the novel SAC-producing strains characterised in this work display promising features for the future development of economically efficient industrial-scale biotechnological processes.     

Microbial biosurfactants production, applications and future potential

Microorganisms synthesise a wide range of surface-active compounds (SAC), generally called biosurfactants. These compounds are mainly classified according to their molecular weight, physico-chemical properties and mode of action. The low-molecular-weight SACs or biosurfactants reduce the surface tension at the air/water interfaces and the interfacial tension at oil/water interfaces, whereas the high-molecular-weight SACs, also called bioemulsifiers, are more effective in stabilising oil-in-water emulsions. Biosurfactants are attracting much interest due to their potential advantages over their synthetic counterparts in many fields spanning environmental, food, biomedical, and other industrial applications. Their large-scale application and production, however, are currently limited by the high cost of production and by limited understanding of their interactions with cells and with the abiotic environment. In this paper, we review the current knowledge and the latest advances in biosurfactant applications and the biotechnological strategies being developed for improving production processes and future potential.     

Phylogenetic characterization of bioemulsifier-producing bacteria

Bacteria able to produce biological emulsifiers were isolated from different environments using different isolation media with the aim of discovering the widest diversity. The phylogenetic diversity of the isolates was evaluated by 16S rRNA gene analysis. Among 190 isolated strains, 127 released extracellular emulsifiers able to stabilize oil-water emulsions when grown on low-cost substrates. Among these, the 35 isolates that showed the highest emulsifier production on different substrates were found to belong to 16 different bacterial genera. Overall, this is the first systematic study of the diversity of bioemulsifier-producing bacteria and of their ability to produce bioemulsifiers on low-cost substrates.     

Evaluation of bacterial strategies to promote the bioavailability of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbon (PAHs)-degrading bacteria may enhance the bioavailability of PAHs by excreting biosurfactants, by production of extracellular polymeric substances, or by forming biofilms. We tested these hypotheses in pure cultures of PAHs-degrading bacterial strains. Most of the strains did not substantially reduce the surface tension when grown on PAHs in liquid shaken cultures. Thus, pseudo-solubilization of PAHs in biosurfactant micelles seems not to be a general strategy for these isolates to enhance PAHs-bioavailability. Three semi-colloid Sphingomonas polysaccharides all increased the solubility of PAHs (Gellan 1.3- to 5.4-fold, Welan 1.8- to 6.0-fold and Rhamsan 2.4- to 9.0-fold). The increases were most pronounced for the more hydrophobic PAHs. The polysaccharide-sorbed PAHs were bioavailable. Mineralization rates of 9-[14C]-phenanthrene and 3-[14C]-fluoranthene by Sphingobium EPA505, were similar with and without sphingans, indicating that mass-transfer rates from PAHs crystals to the bulk liquid were unaffected by the polysaccharides. Biofilm formation on PAHs crystals may favor the diffusive mass transfer of PAHs from crystals to the bacterial cells. A majority of the PAHs-degraders tested formed biofilms in microtiter wells coated with PAHs crystals. For strains capable of growing on different PAHs; the more soluble the PAHs, the lower the percentage of cells attached. Biofilm formation on PAHs-sources was the predominant mechanism among the tested bacteria to overcome mass transfer limitations when growing on poorly soluble PAHs.     

Bacteria from wheat and cucurbit plant roots metabolize PAHs and aromatic root exudates: Implications for rhizodegradation

The chemical interaction between plants and bacteria in the root zone can lead to soil decontamination. Bacteria that degrade polycyclic aromatic hydrocarbons (PAHs) have been isolated from the rhizospheres of plant species with varied biological traits; however, it is not known what phytochemicals promote contaminant degradation. One monocot and two dicotyledon plants were grown in PAH-contaminated soil from a manufactured gas plant (MGP) site. A phytotoxicity assay confirmed greater soil decontamination in rhizospheres when compared to bulk soil controls. Bacteria were isolated from plant roots (rhizobacteria) and selected for growth on anthracene and chrysene on PAH-amended plates. Rhizosphere isolates metabolized 3- and 4-ring PAHs and PAH catabolic intermediates in liquid incubations. Aromatic root exudate compounds, namely flavonoids and simple phenols, were also substrates for isolated rhizobacteria. In particular, the phenolic compounds—morin, caffeic acid, and protocatechuic acid—appear to be linked to bacterial degradation of 3- and 4-ring PAHs in the rhizosphere.     

Isolation of adherent polycyclic aromatic hydrocarbon (PAH)-degrading bacteria using PAH-sorbing carriers

Two different procedures were compared to isolate polycyclic aromatic hydrocarbon (PAH)-utilizing bacteria from PAH-contaminated soil and sludge samples, i.e., (i) shaken enrichment cultures in liquid mineral medium in which PAHs were supplied as crystals and (ii) a new method in which PAH degraders were enriched on and recovered from hydrophobic membranes containing sorbed PAHs. Both techniques were successful, but selected from the same source different bacterial strains able to grow on PAHs as the sole source of carbon and energy. The liquid enrichment mainly selected for Sphingomonas spp., whereas the membrane method exclusively led to the selection of Mycobacterium spp. Furthermore, in separate membrane enrichment set-ups with different membrane types, three repetitive extragenic palindromic PCR-related Mycobacterium strains were recovered. The new Mycobacterium isolates were strongly hydrophobic and displayed the capacity to adhere strongly to different surfaces. One strain, Mycobacterium sp. LB501T, displayed an unusual combination of high adhesion efficiency and an extremely high negative charge. This strain may represent a new bacterial species as suggested by 16S rRNA gene sequence analysis. These results indicate that the provision of hydrophobic sorbents containing sorbed PAHs in the enrichment procedure discriminated in favor of certain bacterial characteristics. The new isolation method is appropriate to select for adherent PAH-degrading bacteria, which might be useful to biodegrade sorbed PAHs in soils and sludge.     

Characterization of a Polycyclic Aromatic Hydrocarbon-Degrading Microbial Consortium from a Petrochemical Sludge Landfarming Site

Anthracene, phenanthrene, and pyrene are polycyclic aromatic hydrocarbon (PAHs) that display both mutagenic and carcinogenic properties. They are recalcitrant to microbial degradation in soil and water due to their complex molecular structure and low solubility in water. This study presents the characterization of an efficient PAH (anthracene, phenanthrene, and pyrene)-degrading microbial consortium, isolated from a petrochemical sludge landfarming site. Soil samples collected at the landfarming area were used as inoculum in Warburg flasks containing soil spiked with 250 mg kg^-1 of anthracene. The soil sample with the highest production of CO₂-C in 176 days was used in liquid mineral medium for further enrichment of anthracene degraders. The microbial consortium degraded 48%, 67%, and 22% of the anthracene, phenanthrene, and pyrene in the mineral medium, respectively, after 30 days of incubation. Six bacteria, identified by 16S rRNA sequencing as Mycobacterium fortuitum, Bacillus cereus, Microbacterium sp., Gordonia polyisoprenivorans, two Microbacteriaceae bacteria, and a fungus identified as Fusarium oxysporum were isolated from the enrichment culture. The consortium and its monoculture isolates utilized a variety of hydrocarbons including PAHs (pyrene, anthracene, phenanthrene, and naftalene), monoaromatics hydrocarbons (benzene, ethylbenzene, toluene, and xylene), aliphatic hydrocarbons (1-decene, 1-octene, and hexane), hydrocarbon mixtures (gasoline and diesel oil), intermediary metabolites of PAHs degradation (catechol, gentisic acid, salicylic acid, and dihydroxybenzoic acid) and ethanol for growth. Biosurfactant production by the isolates was assessed by an emulsification index and reduction of the surface tension in the mineral medium. Significant emulsification was observed with the isolates, indicating production of high-molecular-weigh surfactants. The high PAH degradation rates, the wide spectrum of hydrocarbons utilization, and emulsification capacities of the microbial consortium and its member microbes indicate that they can be used for biotreatment and bioaugumentation of soils contaminated with PAHs.     

Biosurfactant-Mediated Biodegradation of Polycyclic Aromatic Hydrocarbons—Naphthalene

The present study is aimed at the naphthalene degradation with and without biosurfactant produced from Pseudomonas aeruginosa isolated from oil-contaminated soil. The present study was carried out to isolate the bacterial strains for the naphthalene degradation and also for biosurfactant production. The isolated strains were screened for their ability to degrade the naphthalene by the methods of optimum growth rate test and for the production of biosurfactants by cetyltrimethylammonium bromide, blood agar medium, and thin-layer chromatography. The present study also focused on the effect of biosurfactant for the degradation of naphthalene by isolate-1. Two bacterial strains were isolated and screened, one for biodegradation and another for biosurfactant production. The second organism was identified as Pseudomonas aeruginosa by 16S rRNA analysis. The purified biosurfactant reduces the surface tension of water and also forms stable emulsification with hexadecane and kerosene. The end product of naphthalene degradation was estimated as salicylic acid equivalent by spectrophotometric method. The results demonstrated that Pseudomonas aeruginosa has the potential to produce biosurfactant, which enhances the biodegradation of naphthalene. The study reflects the potential use of biosurfactants for an effective bioremediation in the management of contaminated soils.     

Anthracene biodegradation and surface activity by an iron-stimulated Pseudomonas sp

Iron may enhance polycyclic aromatic hydrocarbons (PAHs) degradation directly by increasing the activity of the enzymes involved in the aerobic biodegradation pathways for hydrocarbons, and indirectly by increasing the PAHs bioavailability due to the stimulation of biosurfactant production. In the present work, the PAH anthracene was used in order to study the effect of different forms and concentrations of iron on its biodegradation and surfactant production by Pseudomonas spp. isolates from a 14-years old petrochemical sludge landfarm site. Among the iron forms, iron nitrate was chosen based on its high solubility and effect on the increase in the growth of the isolate. Iron concentration of 0.1mM was selected as the limit between deficiency and toxicity for isolates growth and anthracene degradation. After 48 days Pseudomonas citronellolis isolate 222A degraded 72% of anthracene related to iron stimulation and surface tension decrease, indicating surfactant production. Pseudomonas aeruginosa isolate 332C was iron-stimulated but did not reduce surface tension while P. aeruginosa isolate 312A exhibited a noniron and surfactant dependence to degrade 72% of anthracene. Isolate 222A showed a direct dependence on iron to stimulate surfactant activity, which probably increased anthracene bioavailability. To our knowledge, this is the first report about the iron effect on anthracene degradation and surfactant production by a Pseudomonas sp. Based on the iron requirement and surfactant activity, the Pseudomonas isolates may be useful for bioremediation of PAHs.     

Cultural factors affecting biosurfactant production by Gordonia sp. BS29

Gordonia sp. BS29 is a hydrocarbon-degrading bacterium isolated from a site chronically contaminated by diesel. The strain produces extracellular bioemulsifiers, able to produce stable emulsions, and cell-bound glycolipid biosurfactants, able to reduce surface tension. The aims of this work were to investigate the cultural factors affecting the production of the cell-bound biosurfactants by Gordonia sp. BS29 and to find the optimal composition of growth medium for the production. The cultural factors which have a significant influence on surfactant biosynthesis, identified by a two level 2^(8-2) Fractional Factorial Design, were the type and concentration of the carbon source, the concentrations of phosphates and sodium chloride, and the interactions among these factors. On these factors, a flask-scale optimisation of cultural conditions was carried out. Then, a steepest ascent procedure and a Central Composite Design were applied to obtain a second order polynomial function fitting the experimental data near the optimum. In the optimised cultural condition we obtained a 5-fold increase in the biosurfactant concentration compared to the un-optimised medium (26.00), reaching a Critical Micelle Dilution value (129.43) among the highest in literature. The optimisation procedure did not change the number and type of the glycolipid biosurfactants produced by Gordonia sp. BS29.     

Isolation of Adherent Polycyclic Aromatic Hydrocarbon (PAH)-Degrading Bacteria Using PAH-Sorbing Carriers

Two different procedures were compared to isolate polycyclic aromatic hydrocarbon (PAH)-utilizing bacteria from PAH-contaminated soil and sludge samples, i.e., (i) shaken enrichment cultures in liquid mineral medium in which PAHs were supplied as crystals and (ii) a new method in which PAH degraders were enriched on and recovered from hydrophobic membranes containing sorbed PAHs. Both techniques were successful, but selected from the same source different bacterial strains able to grow on PAHs as the sole source of carbon and energy. The liquid enrichment mainly selected for Sphingomonas spp., whereas the membrane method exclusively led to the selection of Mycobacterium spp. Furthermore, in separate membrane enrichment set-ups with different membrane types, three repetitive extragenic palindromic PCR-related Mycobacterium strains were recovered. The new Mycobacterium isolates were strongly hydrophobic and displayed the capacity to adhere strongly to different surfaces. One strain, Mycobacterium sp. LB501T, displayed an unusual combination of high adhesion efficiency and an extremely high negative charge. This strain may represent a new bacterial species as suggested by 16S rRNA gene sequence analysis. These results indicate that the provision of hydrophobic sorbents containing sorbed PAHs in the enrichment procedure discriminated in favor of certain bacterial characteristics. The new isolation method is appropriate to select for adherent PAH-degrading bacteria, which might be useful to biodegrade sorbed PAHs in soils and sludge.     

Surface-Active Agents from Two Bacillus Species

Two Bacillus species were studied which produced bioemulsifiers; however, they were distinctly different compounds. Bacillus sp. strain IAF 343 produced unusually high yields of extracellular biosurfactant when grown on a medium containing only water-soluble substrates. The yield of 1 g/liter was appreciably better than those of most of the biosurfactants reported previously. This neutral lipid product, unlike most lipid biosurfactants, had significant emulsifying properties. It did not appreciably lower the surface tension of water. On the same medium, Bacillus cereus IAF 346 produced a more conventional polysaccharide bioemulsifier, but it also produced a monoglyceride biosurfactant. The bioemulsifier contained substantial amounts of glucosamine and originated as part of the capsule layer. The monoglyceride lowered the surface tension of water to 28 mN/m. It formed a strong association with the polysaccharide, and it was necessary to use ultrafiltration to effect complete separation. The removal of the monoglyceride caused the polysaccharide to precipitate. It is suggested that earlier reports of biopolymers which both stabilized emulsions and lowered surface tension were actually similar aggregates of lipid and bioemulsifier.     

Phylogenetic and physiological comparisons of PAH-degrading bacteria from geographically diverse soils

The diversity of bacteria isolated from creosote- contaminated soils in the United States, Norway, and Germany was determined by comparing their ability to degrade polycyclic aromatic hydrocarbons (PAHs), their phospholipid ester-linked fatty acid (GC-FAME) profiles, sole carbon source utilization patterns (Biolog assays (Use of trade names or specific products does not imply endorsement by the U.S. EPA.), and 16S rRNA sequences. Bacteria were initially obtained by enrichment with phenanthrene and fluoranthene. Many were capable of degrading a broad range of the PAHs found in creosote. Phenanthrene- or fluoranthene- degraders were abundant in most of the soils tested. Several of the fluoranthene-degrading isolates clustered with Sphingomonas (formerly Pseudomonas) paucimobilis strain EPA505 in the GC-FAME and Biolog analyses and three of the isolates examined by 16S rRNA sequence comparisons showed a close relationship with Sphingomonas. In addition, the Sphingomonas strains showed the most extensive degradation of 4- & 5-ring PAHs in creosote. Burkholderia cepacia strains isolated on phenanthrene from PAH-contaminated soils had limited ability to attack higher molecular weight PAHs either individually or in creosote. Thus, PAH degradation capabilities appeared to be associated with members of certain taxa, independent of the origin of the soils from which the bacteria were isolated.     

Diversity of bacterial strains degrading hexadecane in relation to the mode of substrate uptake

The relative distribution of the modes of hydrocarbon uptake, used by bacteria of the environment for the degradation of long-chain alkanes, has been evaluated. The first mode of uptake, direct interfacial accession, involves contact of cells with hydrocarbon droplets. In the second mode, biosurfactant-mediated transfer, cell contact takes place with hydrocarbons emulsified or solubilized by biosurfactants. Sixty-one strains growing on hexadecane were isolated from polluted and non-polluted soils and identified. The majority (61%) belonged to the Corynebacterium-Mycobacterium-Nocardia group. Criteria selected for characterizing hexadecane uptake were cell hydrophobicity, interfacial and surface tensions and production of glycolipidic extracellular biosurfactants. These properties were determined in flask cultures on an insoluble (hexadecane) and on a soluble (glycerol or succinate) carbon source for a subset of 23 representative strains. Exclusive direct interfacial uptake was utilized by 47% of studied strains. A large proportion of strains (53%) produced biosurfactants. The data on cellular hydrophobicity suggested the existence of two distinct alkane transfer mechanisms in this group. Accordingly, tentative assignments of biosurfactant-mediated micellar transfer were made for 11% of the isolated strains, and of biosurfactant-enhanced interfacial uptake for 42%.     

Screening of biosurfactant-producing Bacillus strains using glycerol from the biodiesel synthesis as main carbon source

Glycerol, a co-product of biodiesel production, was evaluated as carbon source for biosurfactant production. For this reason, seven non-pathogenic biosurfactant-producing Bacillus strains, isolated from the tank of chlorination at the Wastewater Treatment Plant at Federal University of Ceara, were screened. The production of biosurfactant was verified by determining the surface tension value, as well as the emulsifying capacity of the free-cell broth against soy oil, kerosene and N-hexadecane. Best results were achieved when using LAMI005 and LAMI009 strains, whose biosurfactant reduced the surface tension of the broth to 28.8?±?0.0 and 27.1?±?0.1?mN?m(-1), respectively. Additionally, at 72?h of cultivation, 441.06 and 267.56?mg?L(-1) of surfactin were produced by LAMI005 and LAMI009, respectively. The biosurfactants were capable of forming stable emulsions with various hydrocarbons, such as soy oil and kerosene. Analyses carried out with high performance liquid chromatography (HPLC) showed that the biosurfactant produced by Bacillus subtilis LAMI009 and LAMI005 was compatible with the commercially available surfactin standard. The values of minimum surface tension and the CMC of the produced biosurfactant indicated that it is feasible to produce biosurfactants from a residual and renewable and low-cost carbon source, such as glycerol.     

Isolation and Characterization of Biosurfactant-and Bioemulsifier-Producing Bacteria from Petroleum Contaminated Sites in Western Canada

Biosurfactant-producing bacteria were isolated from two petroleum contaminated sites in western Canada. Seven potential biosurfactant/bioemulsifier-producing isolates were screened and characterized. All of the seven isolates were able to form emulsions. Emulsion-stabilizing capacity was also measured up to 48 hrs. Strain C-111-2 and C-203-2 would lead to highly reduced surface tension. For strain C-203-2, the optimum conditions that supported bacteria growth and production were investigated. The influences of carbon sources, medium pH values, and temperature were taken into account. The experimental results indicated that the crude oil and glucose were promising carbon sources for biosurfactants production; the isolated strains produced a maximum concentration of biosurfactant in a neutral pH environment and showed a higher surface activity under the temperature level of 35°C than that under 10°C. To further optimize the carbon and nitrogen source for biosurfactant production, response surface methodology (RSM) was applied to explore the favorable concentration of two carbon sources: glucose, crude oil, and one nitrogen source, NaNO₃. The optimal concentration of 8.1g/L, 4% and 3.9 g/L for glucose, crude oil, and NaNO₃, respectively, which can be obtained through RSM analysis.     

Diversity of biosurfactant producing microorganisms isolated from soils contaminated with diesel oil

Biosurfactant production is a desirable property of hydrocarbon-degrading microorganisms (HDM). We characterized biosurfactant producing microbial populations from a Long Beach soil, California (USA) and a Hong Kong soil (China), contaminated with diesel oil. A total of 33 hydrocarbon-utilizing microorganisms were isolated from the soils. Twelve isolates and three defined consortia were tested for biosurfactant production and emulsification activity. The highest reduction of surface tension was achieved with a consortium of L1, L2 and L3 isolates from a Long Beach soil (41.4mN m(-1)). Isolate L1 (Acinetobacter junii) displayed the highest reduction of surface tension (46.5 mN m(-1)). The emulsifying capacity evaluated by the E24 emulsification index was highest in the culture of isolate L5 (74%). No substantial emulsification was achieved with the cell-free extracts, indicating that the emulsifying activity was not extracellular. Based on surface tension and the E24 index results, isolates F1, F2, F3, F4, L1, L2, L3 and L4 were identified by 16S rRNA gene sequencing as Bacillus cereus, Bacillus sphaericus, B. fusiformis, Acinetobacter junii, a non-cultured bacterium, Pseudomonas sp. and B. pumilus, respectively. Cluster analyses of 16S rRNA gene sequences of the bacterial isolates revealed 70% similarity amongst hydrocarbon-degrading bacterial community present in both soils. Five isolates (isolates F1, F2, F3, F4 and L4) belong to the Firmicutes order, two isolates (L1 and L3) belong to the Proteobacteria order and one isolate (L2) is an Actinomyces sp. Simpson's index (1 - D) and the Shannon-Weaver index (H) revealed more diversity of HDM in the Hong Kong soil, while evenness (E) and the equitability (J) data indicated that there was not a dominant population. Bacterial isolates displaying substantial potential for production of biosurfactants can be applied in the bioremediation of soils contaminated with petroleum hydrocarbons.     

Isolation of soil bacteria adapted to degrade humic acid-sorbed phenanthrene

The goal of these studies was to determine how sorption by humic acids affected the bioavailability of polynuclear aromatic hydrocarbons (PAHs) to PAH-degrading microbes. Micellar solutions of humic acid were used as sorbents, and phenanthrene was used as a model PAH. Enrichments from PAH-contaminated soils established with nonsorbed phenanthrene yielded a total of 25 different isolates representing a diversity of bacterial phylotypes. In contrast, only three strains of Burkholderia spp. and one strain each of Delftia sp. and Sphingomonas sp. were isolated from enrichments with humic acid-sorbed phenanthrene (HASP). Using [14C]phenanthrene as a radiotracer, we verified that only HASP isolates were capable of mineralizing HASP, a phenotype hence termed "competence." Competence was an all-or-nothing phenotype: noncompetent strains showed no detectable phenanthrene mineralization in HASP cultures, but levels of phenanthrene mineralization effected by competent strains in HASP and NSP cultures were not significantly different. Levels and rates of phenanthrene mineralization exceeded those predicted to be supported solely by the metabolism of phenanthrene in the aqueous phase of HASP cultures. Thus, competent strains were able to directly access phenanthrene sorbed by the humic acids and did not rely on desorption for substrate uptake. To the best of our knowledge, this is the first report of (i) a selective interaction between aerobic bacteria and humic acid molecules and (ii) differential bioavailability to bacteria of PAHs sorbed to a natural biogeopolymer.     

Capacity for biosurfactant production of environmental Pseudomonas and Vibrionaceae growing on carbohydrates

Summary Pseudomonas and Vibrionaceae strains with the capacity to produce biosurfactants when growing on sucrose were isolated from the environment by a simple screening procedure. Agargrown colonies were randomly selected; each colony was suspended in a water droplet on a microscope slide. The tested strain was regarded as positive if the droplet spread over the surface.1779 Pseudomonas and 660 Vibrionaceae isolates were tested; 1% and 0.8% of the isolates, respectively, were positive for biosurfactant production. No production was detected amongst the isolates of a control group of 538 Gram-positive and 1063 Gram-negative strains.Four biosurfactant producing strains were grown in fermenter cultures on a semisynthetic medium using sucrose as carbon and energy source. The terminal concentrations of biosurfactants were in the range of a factor 40 times the critical micelle dilution. One P. fluorescens strain was grown in a carbon limited chemostat (succinate). The biosurfactant production was successively decreasing until it stopped after less than ten generation times.     

Biosurfactant production by two isolates ofPseudomonas aeruginosa

Two strains of biosurfactant-producing bacteria, identified asPseudomonas aeruginosa, were isolated from injection water and crude oil-associated water in Venezuelan oil fields. Both biosurfactants resembled rhamnolipids and produced stable emulsions of heavy and extra-heavy crude oils, reducing the surface tension of water from 72 to 28 dynes/cm. Tenso-active properties of the biosurfactants were not affected by pH, temperature, salinity or Ca²⁺ or Mg²⁺ at concentrations in excess of those found in many oil reservoirs in Venezuela.