Genetic parameters for physical and quality traits of mohair in South African Angora goats

The continuous evaluation and genetic improvement of fleece traits in Angora goats are of major importance to the Angora goat industry. The objective of this study was to estimate variance components and genetic parameters for both physical and quality traits of mohair in South African Angora goats. The data used for this study were collected on between 898 and 6211 kids (depending on the trait measured) born between 2000 and 2006 in 11 different Angora goat studs. Variance components and genetic parameters were estimated with the ASREML programme for fleece weight, fibre diameter, coefficient of variation of fibre diameter, standard deviation of fibre diameter, comfort factor, spinning/effective fineness and standard deviation of fibre diameter along the length of the staple. Most of these traits (excluding fleece weight) are measured using OFDA technology exclusively, and this study was the first attempt to calculate genetic parameters for these traits in South Africa. A model including the direct additive genetic effects only, were the most appropriate for estimation of all parameters. Heritability estimates were 0.24 ± 0.03 for fleece weight, 0.45 ± 0.03 for fibre diameter, 0.37 ± 0.10 for coefficient of variation of fibre diameter, 0.32 ± 0.11 for standard deviation of fibre diameter, 0.63 ± 0.10 for comfort factor, 0.61 ± 0.10 for spinning/effective fineness and 0.14 ± 0.08 for standard deviation of fibre diameter along the length of the staple. Results from this study can now be applied for the estimation of breeding values for fleece production of South African Angora goats and in incorporation into selection programs.     

The effects of ambient temperature and thermoregulation on locomotor performance of newborn Guide toad-headed lizards (Phrynocephalus putjatia)

The effect of thermal environments during embryonic development as a proximate source of variation in the fitness of offspring has been examined in a wide variety of taxa, and reptiles have been proved to be excellent mode systems for research in this field. Here, we describe a study revealing the effects of ambient temperature and thermoregulation on locomotor performance of newborn ovoviviparous lizards. A 2 (background temperatures set at 18 °C or 22 °C) × 2 (allowing thermoregulation for 14 h or 10 h daily) factorial design experiment was carried out to examine the effects of ambient temperature and thermoregulation on the locomotor performance of newborn Guide toad-headed lizards (Phrynocephalus putjatia; Agamidae). Gravid females were collected in May 2010 from a population in Guide, Qinghai, northwestern China, and were transported to our laboratory in Hangzhou. Ten to fifteen females were housed together in 1200 mm × 600 mm × 700 mm (length × width × height) communal cages, which were placed in AAPS (artificial atmospheric phenomena simulator) rooms, and contained a substrate of sand (～400 mm depth), with rocks and pieces of clay tiles provided as shelter and basking sites. One light bulb (200 W) was suspended above one end of the cage to create a thermal gradient ranging from room temperature to 60 °C for 14 h or 10 h daily, and overnight temperatures followed AAPS temperatures (18 °C or 22 °C). Food (mealworms and house crickets) dusted with multivitamins and minerals and water were provided daily. Cages were checked twice daily for neonates after the first female gave birth, and neonates were immediately collected and weighed after birth.Twenty neonates from single litters of each testament were measured at birth for locomotor performance. All running trials were conducted at a body temperature of 30 °C, which was achieved by placing the newborns in an incubator at 30 °C for 30 min prior to testing. Locomotor performance was assessed by chasing the neonates along a 2-m-long racetrack, which was placed in a room at constant 30 °C, with one side of the racetrack transparent, allowing videoing with a Panasonic NV-DS77 digital video camera. The tapes were later examined with a computer using MGI VideoWave III software for PC (MGI Software Co., Toronto, Canada) for sprint speed in the fastest 250-mm interval and the maximal length. Each individual was measured five times after birth, at 15-day intervals, until 60 days.We found that locomotor performance of neonates was affected by thermoregulating opportunity, but not by background temperature. Neonates produced by females thermoregulated for 14 h daily performed better (both sprint speed and the maximal length) in the racetrack than those produced by females thermoregulated for 10 h daily. However, the interaction between background temperature and thermoregulating opportunity was not a significant source of variation in locomotor performance. Moreover, sprint speed was positively correlated to the maximal length in newborn P. putjatia. In summary, locomotor performance is a highly fitness-related trait, and this study implies that viviparity allows female P. putjatia to provide optimal temperatures for embryo development through thermoregulation, thereby producing well-performed offspring.     

Introduction of sheep meat breeds in extensive systems: Lamb carcass characteristics

Genotype effects on lamb carcass traits were investigated in a 4-year study aimed at assessing potential benefits from introducing meat breeds into the wool-oriented extensive sheep systems of northeastern Patagonia, Argentina. Five ram [Corriedale: CO; Border Leicester: BL; Île de France: IF; Texel: TX; and synthetic CRIII (25% Merino, 37.5% IF, 37.5% TX)] and 5 dam (CO; synthetic CRIII; BLCO: BL × CO; IFCO: IF × CO; and TXCO: TX × CO) genotypes were represented in the study. Data were collected from 436 male lambs of 9 genotypes (CO × CO, BL × CO, IF × CO, TX × CO, CRIII × CO, CRIII × BLCO, CRIII × IFCO, CRIII × TXCO, and CRIII × CRIII). Hot carcass weights and dressing yields were determined after slaughtering. Carcasses were given conformation and subcutaneous fat scores using the EUROP system [scale varying from E (best) to P (poorest) for conformation, and from 1 (lean) to 5 (overfat) for subcutaneous fat]. Linear measurements of carcass length and width were recorded and carcass compactness indices were calculated from those. Purebred CO acted as a standard for comparisons. On a constant liveweight basis, genotypes CRIII × IFCO and CRIII × CRIII presented higher (P < 0.05) carcass weight and dressing yield than CO × CO and BL × CO. Crossbred and synthetic genotypes showed higher (P < 0.05) carcass width than CO × CO. With the exception of BL × CO the remaining genotypes showed higher (P < 0.05) carcass width/length ratio than CO × CO. The probability that carcasses of crossbred and synthetic lambs presented better conformation than CO × CO was higher than 84%. Carcasses of CRIII × IFCO lambs were given the best conformation scores. The probability that BL × CO carcasses presented higher subcutaneous fat than the remaining genotypes exceeded 79%. Our results indicate significant improvements in carcass conformation arising from crossing. Sheep farmers in extensive systems could take advantage of the higher fatness of BL crossbred lambs to produce light carcasses with adequate fat cover, a crucial industry requirement. Terminal crossbreeding with Île de France, Texel, and CRIII rams could be implemented to improve carcass conformation thus matching market demand for heavy carcasses with limited fat content. Second cross schemes did not improve carcass commercial traits over the best terminal cross or the synthetic CRIII breed.     

Production of specific-molecular-weight hyaluronan by metabolically engineered Bacillus subtilis 168

Low-molecular-weight hyaluronan (LMW-HA) has attracted much attention because of its many potential applications. Here, we efficiently produced specific LMW-HAs from sucrose in Bacillus subtilis. By coexpressing the identified committed genes (tuaD, gtaB, glmU, glmM, and glmS) and downregulating the glycolytic pathway, HA production was significantly increased from 1.01 g L⁻¹ to 3.16 g L⁻¹, with a molecular weight range of 1.40×10⁶–1.83×10⁶ Da. When leech hyaluronidase was actively expressed after N-terminal engineering (1.62×10⁶ U mL⁻¹), the production of HA was substantially increased from 5.96 g L⁻¹ to 19.38 g L⁻¹. The level of hyaluronidase was rationally regulated with a ribosome-binding site engineering strategy, allowing the production of LMW-HAs with a molecular weight range of 2.20×10³–1.42×10⁶ Da. Our results confirm that this strategy for the controllable expression of hyaluronidase, together with the optimization of the HA synthetic pathway, effectively produces specific LMW-HAs, and could also be used to produce other LMW polysaccharides.     

Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

Morphological characteristics of phytoliths from representative conifers in China

Coniferous phytoliths in sediments are an effective tool for detecting the historical appearance of conifers. However, at the timberline in mountainous areas, such coniferous phytoliths are easily confused with grass phytoliths. This study analyses modern phytoliths from 17 conifer plants. Six common types and six rare types were identified. The conifers studied produce abundant blocky polyhedral and cubic (in the average 30–40 μm size range), blocky scrobiculate (average 30–40 μm), tabular elongate unsculpted (length 50–100 μm, width 10–20 μm), tabular elongate cavate (length 50–150 μm, width ∼10 μm), tabular elongate dendritic (50–100 μm × 10–20 μm), and irregular oblong (20–40 μm) phytoliths. This paper aims to show morphological characteristics of coniferous phytoliths in China, and to show how the common coniferous phytoliths differ from similar grass phytolith types, such as blocky polyhedral coniferous phytoliths from silicified parallelepipedal bulliform cells produced by grass. Blocky polyhedral and cubic phytoliths are the commonest coniferous phytoliths found in the sediments, but need to be carefully distinguished from grass parallelepipedal bulliform cells. This study indicates that clearly protruding ridges and irregular inward edges are essential features of cubic and polyhedral morphotypes produced by conifers. Results of this paper might provide important material for the study of paleovegetation and paleoecology of mountainous areas, especially at the timberline.     

Non-genetic factors affecting morphometric and fleece traits in guanaco (Lama guanicoe guanicoe) populations from Argentinean Patagonia

Lama guanicoe guanicoe is the guanaco subspecies located in the Argentinean Patagonia. It is of particular interest to characterize these populations as it is a native species and a high quality fibre production genetical resource. With the aim of describing phenotipically Lama guanicoe guanicoe populations, 262 specimens were sampled. The animals came from four different ecological regions, both wild and bred in captivity, from 5 ranches. Three age classes were established: calves (0–1 year), yearlings (1–2 years) and adults (more than 2 years). Morphometric variables measured were: body length (BL), thoracic depth (TD), half thoracic perimeter (HTP), head length (HL), shin length (ShL) and metacarpal circumference (MC). Fleece samples were evaluated on two ranches (n = 115) for: fleece total weight (FTW) and mean diameter of down (MDFD). Relationships between variables were studied and differences between morphostructures considering sex, age and ranch were analyzed. Age was the most important differencing factor (p < 0.05) for all morphometric traits (except for the ShL between yearlings and adults). Calves had finer MDFD (14.2 ± 0.6 μm) and less FTW (159 ± 47 g) than yearlings (15 ± 5.8 μm and 254 ± 57 g). Sexual dimorphism was not found in calves nor in yearlings for any of the morphometric characters considered. Adult females presented greater significant values (p < 0.05) for TD (42.7 ± 2.1 cm) and HTP (55.4 ± 3.2 cm) than males (41.6 ± 2.3 cm and 53 ± 2.9 cm, respectively). Only calf males presented higher significant values than females for the FTW (169 ± 42 g and 147 ± 51 g, respectively). FTW and MDFD were positively correlated between them (0.42) and with the thoracic measures (TD and HTP), these data imply an inverse relationship between quality and quantity of the fleece and suggest that the thoracic variables are good indicators of the fleece animal production in these Patagonian populations.     

Molecular distinction of C × R hybrid (Coffea congensis × Coffea canephora) from morphologically resembling male parent using rbcL and matK gene sequences

Interspecific C × R hybrid (Coffea congensis × Coffea canephora) in India is cultivated as mixed population with male parent C. canephora as this species is an efficient pollen donor for enhanced yield. But distinction of C × R hybrid from C. canephora in old plantation is difficult due to varying plant sizes of C × R hybrid and often resembles with C. canephora. C × R hybrid cultivated under different agroclimatic conditions show distinct vegetative growth pattern with varying yields. Thus development of DNA marker for identification of C × R hybrid is important for clonal propagation and seed preparation from selective individuals. In this study, two DNA bar coding loci of chloroplast genome (rbcL and matK) of parents, F1 hybrid and its back cross progeny were partially sequenced to identify SNPs as DNA marker for distinction of C × R hybrid from C. canephora. Seven SNPs in the matK gene sequence and three nucleotides in the rbcL gene sequence were identified as DNA markers for the genetic identity of C. congensis. These SNPs were found in F1 and advanced progenies of C × R hybrid due to maternal inheritance. Large number of samples of C × R hybrids with varying morphological features revealed no polymorphism among C × R hybrid and C. congensis. Thus, the SNPs in C. congensis can be used as DNA markers for precise identification of C × R hybrid for production of clones besides tagging the chloroplast inheritance in advanced progenies.     

Glomerella truncata sp. nov., the teleomorph of Colletotrichum truncatum

Anthracnose of lentil, caused by Colletotrichum truncatum is a serious threat to lentil (Lens culinaris) grown in western Canada. The teleomorph stage of this pathogen was induced to form under laboratory conditions. Random pairing of single conidium isolates enabled the identification of fertile isolates. The individual isolates of this fertile pair were crossed with 14 other isolates, and all isolates were also incubated alone. Self-sterility was observed for all 16 isolates tested. Three isolates did not produce perithecia with either tester isolate, and none of the isolates tested produced perithecia with both tester isolates. Perithecia were brown–black, superficial, solitary or in small groups, obpyriform to ovate or ampulliform, 200–520 × 110–320 μm (mean: 350 × 200 μm). Asci were cylindrical, narrowing slightly at the apex, unitunicate, evanescent, 53–142 × 5–14 μm (mean: 90 × 8 μm), and contained eight ascospores. Ascospores were hyaline, aseptate, oblong, 12–20 × 5–8 μm (mean: 15.7–6.7 μm). The characteristics agree with those described for the genus Glomerella, and the species was named G. truncata sp. nov. The morphology of the new species is compared with that of other species in the genus, and future research on G. truncata is described.     

Comparison of CT artifacts and image recognition of various fiducial markers including two types of thinner fiducial markers for CyberKnife treatment

AimThe aim of the study was to evaluate computed tomography (CT) artifacts and image recognition of the CyberKnife system. Regarding fiducial markers, VISICOIL of 0.5 mm × 5.0 mm and 0.75 mm × 5.0 mm, ball-shaped Gold Anchor (GA) of 0.28 mm × 10 mm and 0.28 mm × 20 mm, were compared with the standard cylinder marker of 0.9 mm × 3.0 mm (ACCULOC).BackgroundRecently, various kinds of commercial fiducial markers have been available in CyberKnife treatment.Materials and methodsThe CT images of a water equivalent gel with each fiducial marker were acquired for the evaluation of CT artifacts. The evaluation was performed using the standard deviation of Hounsfield Unit (HU) value for a rectangle region near the fiducial marker. Then, to evaluate the image recognition, each fiducial marker was located to overlap in the target locating system (TLS) for the two sites; the vertebral bone and the pubic bone.ResultsFor CT artifacts, the standard deviations of the VISICOIL of 0.5 mm × 5.0 mm was the smallest. The image recognition of four fiducial markers had a value close to the standard cylinder marker and was feasible for common use, but was slightly poorer when using GA of 0.28 mm × 10 mm in the dynamic conditions.ConclusionOur results indicated that VISICOIL 0.5 × 5.0 mm and the GAs can be used nearly always for CyberKnife treatment in spite of their much thinner needles than those of cylinder types.     

2,5-Diaryloxadiazoles and their precursors as novel inhibitors of cathepsins B,H and L

High levels of cathepsins indicated in various pathological conditions like arthritis, cancer progressions, and atherosclerosis explains the need to explore potential inhibitors of these proteases which can be of great therapeutic significance. We, in the present work, report the synthesis of some 2,5-diaryloxadiazoles from N-subsitutedbenzylidenebenzohydrazides. The synthesized compounds were screened for their inhibitory potential on cathepsins B, H and L. Structure Activity Relationship studies show that 2,5-diaryloxadiazoles were less inhibitory than their precursors. 1i and 2k have been found to be most inhibitory to cathepsins B and L. Their K_i values have been calculated as 11.38 × 10⁻⁸ M and 66.4 × 10⁻⁸ M for cathepsin B and 4.2 × 10⁻⁹ M and 47.31 × 10⁻⁹ M for cathepsin L, respectively. However, cathepsin H activity was maximally inhibited by compounds, 1e and 2c with K_i values of 4.4 × 10⁻⁷ M and 5.6 × 10⁻⁷ M, respectively. Enzyme kinetic studies suggest that these compounds are competitive inhibitors to the enzymes. The results have been compared with docking results obtained using iGemDock.     

The influence of rapid urbanization and land use changes on terrestrial carbon sources/sinks in Guangzhou,China

Complex changes in carbon sources and sinks caused by rapid urbanization have been observed with extensive changes in the quantity, structure, and spatial pattern of land use types. Based on the modified Carnegie-Ames-Stanford Approach model and on gray relational analysis, we analyzed the influence of land use changes on carbon sinks and emissions in Guangzhou from 2000 to 2012. The aim was to identify suitable options for built-up land expansion that would allow for minimal carbon losses. The key results were as follows: (1) Built-up land increased by 118.91% in Guangzhou city over the study period, with this expansion taking the form of concentric circles extending around the old Yuexiu district. (2) Carbon emissions over the period of analysis significantly exceeded carbon sink capabilities. The total carbon sink decreased by 30.02%, from 535.40 × 10³ t to 374.6 × 10³ t. Total carbon emissions increased by 1.89 times, from 13.73 × 10⁶ t to 39.67 × 10⁶ t; 80% of carbon emissions were derived from energy consumption. (3) There were large differences in the extent of carbon sink losses at different scales of built-up land expansion and land use change. In Guangzhou, the loss of carbon sink is small when cultivated land (though not prime farmland) and water bodies are converted to built-up land on a small scale. The loss of carbon sink is much smaller when grasslands are converted to built-up land on a large scale. However, forested land, which has excellent carbon sink functions, should not be converted. (4) Changes in carbon sinks were mainly affected by natural factors and land urbanization. Changes in carbon emissions were mainly affected by population urbanization, economic urbanization, and land urbanization. (5) To achieve “economical and intensive use of land”, “urban growth boundary” and “ecological red lines” should be determined for government policies on land use management. These factors have great significance for “increasing carbon sinks and reducing carbon emissions” in urban ecological systems.     

Monte Carlo study on the secondary cancer risk estimations for patients undergoing prostate radiotherapy: A humanoid phantom study

AimThe aim of this study was to estimate the secondary malignancy risk from the radiation in FFB prostate linac-based radiotherapy for different organs of the patient.BackgroundRadiation therapy is one of the main procedures of cancer treatment. However, the application the radiation may impose dose to organs of the patient which can be the cause of some malignancies.Materials and methodsMonte Carlo (MC) simulation was used to calculate radiation doses to patient organs in 18 MV linear accelerator (linac) based radiotherapy. A humanoid MC phantom was used to calculate the equivalent dose s for different organs and probability of secondary cancer, fatal and nonfatal risk, and other risks and parameters related to megavoltage radiation therapy. In out-of-field radiation calculation, it could be seen that neutrons imparted a higher dose to distant organs, and the dose to surrounding organs was mainly due to absorbed scattered photons and electron contamination.ResultsOur results showed that the bladder and skin with 54.89 × 10⁻³ mSv/Gy and 46.09 × 10⁻³ mSv/Gy, respectively, absorbed the highest equivalent dose s from photoneutrons, while a lower dose was absorbed by the lung at 3.42 × 10⁻³ mSv/Gy. The large intestine and bladder absorbed 55.00 × 10⁻³ mSv/Gy and 49.08 × 10⁻³, respectively, which were the highest equivalent dose s due to photons. The brain absorbed the lowest out-of-field dose, at 1.87 × 10⁻³ mSv/Gy.ConclusionsWe concluded that secondary neutron portion was higher than other radiation. Then, we recommended more attention to neutrons in the radiation protection in linac based high energy radiotherapy.     

Low frequency-low voltage alternating electric current-induced anoxic granulation in biofilm-electrode reactor: A study of granule properties

We characterized anoxic nitrate granules produced by an alternating current biofilm electrode reactor operating at low voltage-low frequency under optimum conditions. Hydrodynamic results revealed that the settling velocity for the granules ranged from 0.12 to 2.85 cm/s, while that of settling velocities ranged from 0.07 to 3.42 cm/s. Granule diameter varied, with a mean mass of 3.65 ± 1.29 mm and corresponding dry mass ranging from 0.52 to 5.64 mg. Roundness ratio of the sampled granules was determined to be 0.78 ± 0.11. Integrity coefficient obtained from a shear strength test was 87.05 ± 2.07% after 2 min and 74.1 ± 4.14% after 5 min. An adhesion test revealed hydrophilic properties of bacteria. The Most probable number (MPN) value was 2.0 × 10⁶ for HDB and 2.0 × 10³ for ADB. An apoptosis assay by flow cytometry confirmed that the majority of cells (87.7%) were viable and non-apoptotic (Annexin V-PI) and dehydrogenase activity was 15.05 ± 1.76 μg TF/mg biomass cm⁻² d. Comparison of seed and granules by ¹H NMR spectra showed different signals in the range of 0.279–1, 1–1.5, and 1.5–7.5 ppm. Therefore, the biofilm in ACBER can be easily granulated and used to generate dense and fast-settling sludge granules.     

Protein requirements of Texel crossbred lambs

A comparative slaughter trial was conducted to determine the protein requirements for maintenance and growth of feedlot Texel crossbred lambs. Thirty 11/16 Texel × 5/16 Ile de France crossbred noncastrated male lambs weaned at 42 days of age (16.2 ± 2.1 kg of shrunk body weight; SBW) were used. Five lambs were chosen randomly and slaughtered after 10 days of experimental management and diet adaptation (baseline group). Fifteen lambs were fed ad libitum and slaughtered at 25, 30 or 35 kg of SBW. The remaining 10 lambs were then assigned randomly to two levels of dry matter intake, either 70 or 55% of the ad libitum intake, and were slaughtered concomitantly with lambs slaughtered at 35 kg of SBW but given free choice access to feed. Total body N content and retention were determined. Additionally, six Texel × Ile de France crossbred lambs (30.4 ± 2.6 kg of SBW) housed in individual metabolic cages were used in a replicated 3 × 3 Latin square digestibility trial to evaluate diet digestibility and microbial protein synthesis at the different levels of feed intake. The endogenous N loss was 243 ± 29 mg/kg^0.75 of SBW, corresponding to a net protein requirement for maintenance of 1.52 ± 0.18 g/kg^0.75 of SBW. The metabolizable protein (MP) requirement for maintenance was 2.31 g/kg^0.75 of SBW, and the efficiency of MP use for maintenance was 0.66. Fleece-free body protein content decreased from 163 to 155 g/kg of empty body weight (EBW) as EBW increased from 13 to 28 kg. However, when protein in fleece was considered the whole-body protein content remained nearly constant. Net protein requirements for body weight gain and wool growth of lambs at 15 and 35 kg of SBW, and an average daily gain of 250 g, were 28.7 and 27.3 g/day and 3.8 and 5.8 g/day, respectively. Estimated efficiencies of MP use for body weight gain (k_pg) and wool growth (k_pw) were, respectively, 0.71 and 0.46. Growth pattern of the wool has a high influence on protein requirements of lambs. Texel crossbred growing lambs used in our study showed protein requirements for growth lower than those reported by the most nutritional systems.     

Effect of plant spacing on the growth,flowering and bulb production of four lachenalia cultivars

A 2-year field experiment was performed with lachenalia (‘Namakwa’, ‘Ronina,’ ‘Rosabeth’ and ‘Rupert’) to study the effects of planting density on leaf formation, inflorescence quality and bulb production. Bulbs 6.0 cm in circumference were planted at a spacing of 2.0 × 5.0 cm, 3.0 × 7.0 cm and 5.0 × 10.0 cm, and cultivated in the open air in Polish conditions in 2009 and 2010. The spacing affected the number of leaves only in lachenalia ‘Namakwa’ in 2010. In the other cases, the bulbs formed 2–3 leaves. Plant height increased with the high-density treatment, but flower yield and the total time to the beginning of flowering were independent of planting density. The cultivars proved to differ in terms of the time of blooming: ‘Namakwa’ and ‘Ronina’ flowered earlier (after 63–73 days) than ‘Rosabeth’ and ‘Rupert’ (after 82–90 days). Plant arrangement had little effect on inflorescence length and the number of florets. Irrespective of the spacing, lachenalia ‘Rupert’ seemed to be the most floriferous — one bulb produced even 30 flowers. Lower planting density influenced advantageously the quality of bulbs (circumference and weight), without affecting their quantity (number of bulbs from one plant).     

The risk of cancer in the offspring and parental length of life

BackgroundWe investigated if cancer onset in offspring is related to having short-lived parents for different cancer types and to see if there was a difference in smoking- and non-smoking related cancers.MethodsOur study included 524,391 individuals born in Norway 1940–1950. All children were followed up for cancer from the age of 20 until they were between 59 and 69 years. Parental longevity was examined by grouping parental age of death into parents dying before 75 years of age and parents dying at 75 years of age or older.ResultsAn increased risk of 1.14 (95%CI = 1.10–1.19) among male offspring and 1.08 (95%CI = 1.04–1.12) among female offspring was observed for total cancer when both parents died before the age of 75 compared to offspring with two long-lived parents. The highest increase was found for cancer in the lungs and trachea for both male (HR = 1.67, 95%CI = 1.50–1.86) and female offspring (HR = 1.53, 95%CI = 1.33–1.76). For other smoking-related cancers, the risk was lower. No increased risk was observed for non-smoking-related cancers.ConclusionOffspring of long-lived parents have lower risk of developing cancer compared with offspring of short-lived parents. Intergenerational transmission of risk factors from parents to offspring may play an important role, especially for tobacco-related cancers. However, genetic factors cannot be ruled out, since consistent evidence has implicated genetic factors in smoking behaviour.     

Biocontrol of major postharvest pathogens on apple using Rhodotorula glutinis and its effects on postharvest quality parameters

The biocontrol activity of Rhodotorula glutinis on gray mold decay and blue mold decay of apple caused by Botrytis cinerea and Penicillium expansum, respectively, was investigated, as well as its effects on postharvest quality of apple fruits. The results show there was a significant negative correlation between concentrations of the yeast cells and the disease incidence of the pathogens. The higher concentration of the R. glutinis, the better effect of the biocontrol capacity. At concentrations of R. glutinis 1 × 10⁸ CFU ml^?1, the amount of gray mold decay was completely inhibited after 5 days incubation at 20 °C, after challenge with B. cinerea spores suspension of 1 × 10⁵ spores ml^?1; While the blue mold decay was completely inhibited at concentrations of 5 × 10⁸ CFU ml^?1, at challenged with P. expansum spores suspension of 5 × 10⁴ spores ml^?1_. These results demonstrated that the efficacy of R. glutinis in controlling of gray mold decay of apples was better than the efficacy of controlling blue mold. R. glutinis within inoculated wounds on apples increased in numbers at 20 °C from an initial level of 9.5 × 10⁵ CFU per wound to 2.24 × 10⁷ CFU at 20 °C after 1 day. The highest population of the yeast was recovered 4 days after inoculation, the yeast population in wounds increased by 56.9 times. After that, the population of the yeast began to decline very slowly. R. glutinis significantly reduced the incidence of natural infections on intact fruit from 75% in the control fruit to 28.3% after 5 days at 20 °C, and from 58.3 to 6.7% after 30 days at 4 °C followed by 4 days at 20 °C. R. glutinis treatment had no deleterious effect on quality parameters after 5 days at 20 °C or after 30 days at 4 °C followed by 4 days at 20 °C.     

Sperm loss using different artificial vaginas in rams

The objective of the present study was to evaluate the effect of certain factors on sperm loss during ram semen collection, using an artificial vagina (AV). The factors analyzed were the effect of the male (8 rams), length of the artificial vagina (short versus long), order of the ejaculate (first versus second ejaculate) and lubrication technique (with or without lube). An observational study from a data set containing 55 semen collections from the 8 rams of different breeds (Montadale, Suffolk, Hamphshire, Polypay) were evaluated during the breeding season using a multiple regression statistical analysis over a period of 10 weeks. The results did not show any differences between rams, order of the ejaculate or the use of lubrication on sperm loss. The two types of artificial vaginas however showed significant differences in the percentage sperm loss (P < 0.001). The total ejaculate volume (collection tube volume + liner and cone recovery volume) and sperm concentration/ml (×10⁹) were similar when using the two types of artificial vaginas. The total ejaculate volume recorded for the short artificial vagina was 1.5 ± 0.4 ml and for the long artificial vagina was 1.3 ± 0.6 ml. The concentration of the ejaculate was 2.7 ± 0.6 × 10⁹ sperm/ml for the short artificial vagina and 2.9 ± 0.7 × 10⁹ sperm/ml for the long artificial vagina. The volume of semen in the collection tube using the short artificial vagina was 1.3 ± 0.4 ml, compared to the 0.7 ± 0.5 ml for the long artificial vagina (P < 0.001). The percentage of sperm loss from the short artificial vagina (12.9 ± 5.9%) was significantly lower than when using the long artificial vagina (50.8 ± 13.9%; P < 0.001). From this study, it may be concluded that the type of artificial vagina affects the sperm loss; with the shorter AV recording a lower sperm loss. No effects were detected between rams, order of the ejaculate or the use of lubrication on sperm loss. From the results obtained the use of the short artificial vagina can be recommended.     

Investigation of Foscan® interactions with plasma proteins

The present study investigates the interaction of the second generation photosensitizer Foscan® with plasma albumin and lipoproteins. Spectroscopic studies indicated the presence of monomeric and aggregated Foscan® species upon addition to plasma protein solutions. Kinetics of Foscan® disaggregation in albumin-enriched solutions were very sensitive to the protein concentration and incubation temperature. Kinetic analysis demonstrated that two types of Foscan® aggregated species could be involved in disaggregation: dimers with a rate constant of k₁ = (2.30 ± 0.15) × 10⁻³ s⁻¹ and higher aggregates with rate constants varying from (0.55 ± 0.04) × 10⁻³ s⁻¹ for the lowest to the (0.17 ± 0.02) × 10⁻³ s⁻¹ for the highest albumin concentration. Disaggregation considerably increased with the temperature rise from 15 °C to 37 °C. Compared to albumin, Foscan® disaggregation kinetics in the presence of lipoproteins displayed poorer dependency on lipoprotein concentrations and smaller variations in disaggregation rate constants. Gel-filtration chromatography analysis of Foscan® in albumin solutions demonstrated the presence of aggregated fraction of free, non-bound to protein Foscan® and monomeric Foscan®, bound to protein.