Lactic acid fermentation in a recycle batch reactor using immobilized Lactobacillus casei

Lactic acid production by recycle batch fermentation using immobilized cells of Lactobacillus casei subsp. rhamnosus was studied. The culture medium was composed of whey treated with an endoprotease, and supplemented with 2.5 g/L of yeast extract and 0.18 mM Mn(2+) ions. The fermentation set-up comprised of a column packed with polyethyleneimine-coated foam glass particles, Pora-bact A, and connected with recirculation to a stirred tank reactor vessel for pH control. The immobilization of L. casei was performed simply by circulating the culture medium inoculated with the organism over the beads. At this stage, a long lag period preceded the cell growth and lactic acid production. Subsequently, for recycle batch fermentations using the immobilized cells, the reducing sugar concentration of the medium was increased to 100 g/L by addition of glucose. The lactic acid production started immediately after onset of fermentation and the average reactor productivity during repeated cycles was about 4.3 to 4.6 g/L . h, with complete substrate utilization and more than 90% product yield. Sugar consumption and lactate yield were maintained at the same level with increase in medium volume up to at least 10 times that of the immobilized biocatalyst. The liberation of significant amounts of cells into the medium limited the number of fermentation cycles possible in a recycle batch mode. Use of lower yeast extract concentration reduced the amount of suspended biomass without significant change in productivity, thereby also increasing the number of fermentation cycles, and even maintained the D-lactate amount at low levels. The product was recovered from the clarified and decolorized broth by ion-exchange adsorption. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:841-853, 1997.     

Continuous beer fermentation using immobilized yeast cell bioreactor systems

Traditional beer fermentation and maturation processes use open fermentation and lager tanks. Although these vessels had previously been considered indispensable, during the past decades they were in many breweries replaced by large production units (cylindroconical tanks). These have proved to be successful, both providing operating advantages and ensuring the quality of the final beer. Another promising contemporary technology, namely, continuous beer fermentation using immobilized brewing yeast, by contrast, has found only a limited number of industrial applications. Continuous fermentation systems based on immobilized cell technology, albeit initially successful, were condemned to failure for several reasons. These include engineering problems (excess biomass and problems with CO(2) removal, optimization of operating conditions, clogging and channeling of the reactor), unbalanced beer flavor (altered cell physiology, cell aging), and unrealized cost advantages (carrier price, complex and unstable operation). However, recent development in reactor design and understanding of immobilized cell physiology, together with application of novel carrier materials, could provide a new stimulus to both research and application of this promising technology.     

Ethanol fermentation in an immobilized cell reactor using Saccharomyces cerevisiae

Fermentation of sugar by Saccharomyces cerevisiae, for production of ethanol in an immobilized cell reactor (ICR) was successfully carried out to improve the performance of the fermentation process. The fermentation set-up was comprised of a column packed with beads of immobilized cells. The immobilization of S. cerevisiae was simply performed by the enriched cells cultured media harvested at exponential growth phase. The fixed cell loaded ICR was carried out at initial stage of operation and the cell was entrapped by calcium alginate. The production of ethanol was steady after 24 h of operation. The concentration of ethanol was affected by the media flow rates and residence time distribution from 2 to 7 h. In addition, batch fermentation was carried out with 50 g/l glucose concentration. Subsequently, the ethanol productions and the reactor productivities of batch fermentation and immobilized cells were compared. In batch fermentation, sugar consumption and ethanol production obtained were 99.6% and 12.5% v/v after 27 h while in the ICR, 88.2% and 16.7% v/v were obtained with 6 h retention time. Nearly 5% ethanol production was achieved with high glucose concentration (150 g/l) at 6 h retention time. A yield of 38% was obtained with 150 g/l glucose. The yield was improved approximately 27% on ICR and a 24 h fermentation time was reduced to 7 h. The cell growth rate was based on the Monod rate equation. The kinetic constants (K(s) and mu(m)) of batch fermentation were 2.3 g/l and 0.35 g/lh, respectively. The maximum yield of biomass on substrate (Y(X-S)) and the maximum yield of product on substrate (Y(P-S)) in batch fermentations were 50.8% and 31.2% respectively. Productivity of the ICR were 1.3, 2.3, and 2.8 g/lh for 25, 35, 50 g/l of glucose concentration, respectively. The productivity of ethanol in batch fermentation with 50 g/l glucose was calculated as 0.29 g/lh. Maximum production of ethanol in ICR when compared to batch reactor has shown to increase approximately 10-fold. The performance of the two reactors was compared and a respective rate model was proposed. The present research has shown that high sugar concentration (150 g/l) in the ICR column was successfully converted to ethanol. The achieved results in ICR with high substrate concentration are promising for scale up operation. The proposed model can be used to design a lager scale ICR column for production of high ethanol concentration.     

Evaluation of protein hydrolysates using the fermentation activity of immobilized yeast cells

A rapid, easy, and reproducible method for evaluation of protein hydrolysates has been developed using the ethanol fermentation of immobilized yeast cells as a monitoring system. The method is sensitive to the origin, concentration, and degree of hydrolysis of the hydrolysates.     

固定化植物乳杆菌的制备及其发酵条件优化

采用海藻酸钠包埋植物乳杆菌并通过测定固定化细胞发酵清液的抑菌效果,优化得到的固定化最佳工艺条件为:海藻酸钠浓度为3%,CaCl2浓度为1.5%,菌悬液体积为3.5 mL(4.0×108 cfu/mL).固定化细胞重复发酵多批次效果良好.固定化细胞发酵条件优化结果表明:最适pH为7.0,最适温度为36℃,培养基中添加0....     

Lactic acid fermentation by cells of Lactobacillus rhamnosus immobilized in polyacrylamide gel

Summary The process of lactic acid fermentation of lactose to lactic acid by Lactobacillus rhamnosus ATCC 7469 has been studied. The following processes have been explored: growth kinetics, as well as lactose utilization, production of lactic acid and further degradation of lactic acid. The immobilization experiments were conducted with microbial cells entrapped in polyacrylamide gels. Gels with different ratios of the monomer (acrylamide) and the cross-linking agent (N,N′-methylene-bis-acrylamide) have been tested. These were used in a repeat-batch process. The current processes inside and outside the gel particles were subjects of examination. The evolution of the activity of immobilized cells with repeated use showed that the particles served mainly as a donor of cells for the free culture. In all experiments a very high degree of conversion, 85–90% was observed. After several runs however, the particles were exhausted for microbial cells. A kinetic model of the process of lactic acid production was developed. This model allowed the evaluation of the effect of microbial growth and diffusion limitations inside the gel particles on the process rate and the separate contribution of the free and immobilized cells to the overall fermentation process upon multiple use.     

Continuous ethanol fermentation using immobilized yeast cells

Growing cells of Saccharomyces cerevisiae immobilized in calcium alginate gel beads were employed in fluidizedbed reactors for continuous ethanol fermentation from cane molasses and other sugar sources. Some improvements were made in order to avoid microbial contamination and keep cell viability for stable long run operations. Notably, entrapment of sterol and unsaturated fatty acid into immobilized gel beads enhanced ethanol productivity more than 50 g ethanol/L gel h and prolonged life stability for more than one-half year. Cell concentration in the carrier was estimated over 250 g dry cell/L gel. A pilot plant with a total column volume of 4 kL was constructed and has been operated since 1982. As a result, it was confirmed that 8-10%(v/v)ethanol-containing broth was continuously produced from nonsterilized diluted cane molasses for over one-half year. The productivity of ethanol was calculated as 0.6 kL ethanol/kL reactor volume day with a 95% conversion yield versus the maximum theoretical yield for the case of 8.5% (v/v) ethanol broth.     

Controlled malolactic fermentation in cider using Oenococcus oeni immobilized in alginate beads and comparison with free cell fermentation

Cells of Oenococcus oeni (formerly Leuconostoc oenos) immobilized in alginate beads were used as starter culture to conduct malolactic fermentation in cider production. Concentrations of major organic acids and volatile compounds were monitored during the process, and results were compared to those obtained when using free cells in the same conditions. The rates of malic acid consumption were similar but lower ethanoic acid content and higher concentration of alcohols were detected with immobilized cells. These features have beneficial effects on the organoleptic properties of cider. A comparison between the kinetic behavior in immobilized and free cells, based on the data obtained for the malic acid consumption, has been developed solving the homogeneous diffusion model when it is applied to the system with immobilized cells.     

Biomimetic carbohydrate substrates of tunable properties using immobilized dextran hydrogels

Glycidylmethacrylate-modified dextran macromers (Dex-GMA) of different degrees of substitution (DS) were synthesized. The elastic modulus of the hydrogels produced using one-component and two-component macromer systems was measured using rheometry. When one macromer of DS 1/10 was used, a hydrogel modulus in the range of 0.2 Pa to 42 kPa was obtained by varying the Dex-GMA concentration from 80 to 200 mg/mL. When a mixture of two macromers of different DS (1/10 and 1/23) was used, a more uniform variation of modulus in the range of 0.4 Pa to 42 kPa was achieved by controlling the ratio of the two macromers. When dextran hydrogels were functionalized with fibronectin and immobilized onto glass substrates, the attachment, spreading, and growth of human aortic smooth muscle cells were modulated by the elastic properties of the dextran matrix. The dextran hydrogel system with tunable mechanical and biochemical properties appears promising for applications in cell culture and tissue engineering.     

Characterization of an immobilized cell, trickle bed reactor during long term butanol (ABE) fermentation

Acetone-butanol-ethanol (ABE) fermentation was performed continuously in an immobilized cell, trickle bed reactor for 54 days without, degeneration by maintaining the pH above 4.3. Column clogging was minimized by structured packing of immobilization matrix. The reactor contained two serial glass columns packed with Clostridium acetobutylicum adsorbed on 12- and 20-in.-long polyester sponge strips at total flow rates between 38 and 98.7 mL/h. Cells were initially grown at 20 g/L glucose resulting in low butanol (1.15 g/L) production encouraging cell growth. After the initial cell growth phase a higher glucose concentration (38.7 g/L) improved solvent yield from 13.2 to 24.1 wt%, and butanol production rate was the best. Further improvement in solvent yield and butanol production rate was not observed with 60 g/L of glucose. However, when the fresh nutrient supply was limited to only the first column, solvent yield increased to 27.3 wt% and butanol selectivity was improved to 0.592 as compared to 0.541 when fresh feed was fed to both columns. The highest butanol concentration of 5.2 g/L occurred at 55% conversion of the feed with 60 g/L glucose. Liquid product yield of immobilized cells approached the theoretical value reported in the literature. Glucose and product concentration profiles along the column showed that the columns can be divided into production and inhibition regions. The length of each zone was dependent upon the feed glucose concentration and feed pattern. Unlike batch fermentation, there was no clear distinction between acid and solvent production regions. The pH dropped, from 6.18-6.43 to 4.50-4.90 in the first inch of the reactor. The pH dropped further to 4.36-4.65 by the exit of the column. The results indicate that the strategy for long term stable operation with high solvent yield requires a structured packing of biologically stable porous matrix such as polyester sponge, a pH maintenance above 4.3, glucose concentrations up to 60 g/L and nutrient supply only to the inlet of the reactor.     

Geometrical design of immobilized cell modular units for ethanol fermentation

Formula are developed for calculating the performance characteristics (surface-to-total-volume ratio, surface-to-packing-volume ratio, and void volume fraction) of four different types of immobilized cell modular units (ICMUs) for ethanol fermentation: plate-type, spiral-type, beehive-type and bead-type ICMUs. Examples are used to illustrate how the formulas are useful for investigating the effects of characteristic dimensions of packing geometry, as well as the effect of scale on the performance characteristics of the ICMUs.     

Direct alcoholic fermentation of starchy biomass using amylolytic yeast strains in batch and immobilized cell systems

Summary Direct alcoholic fermentation of dextrin or soluble starch with selected amylolytic yeasts was studied in both batch and immobilized cell systems. In batch fermentations, Saccharomyces diastaticus was capable of fermenting high dextrin concentrations much more efficiently than Schwanniomyces castellii. From 200 g·l^–1 of dextrin S. diastaticus produced 77 g·l^–1 of ethanol (75% conversion efficiency). The conversion efficiency decreased to 59% but a higher final ethanol concentration of 120 g·l^–1 was obtained with a medium containing 400 g·l^–1 of dextrin. With a mixed culture of S. diastaticus and Schw. castellii 136 g·l^–1 of ethanol was produced from 400 g·l^–1 of dextrin (67% conversion efficiency). S. diastaticus cells attached well to polyurethane foam cubes and a S. diastaticus immobilized cell reactor produced 69 g·l^–1 of ethanol from 200 g·l^–1 of dextrin, corresponding to an ethanol productivity of 7.6g·l^–1·h^–1. The effluent from a two-stage immobilized cell reactor with S. diastaticus and Endomycopsis fibuligera contained 70 g·l^–1 and 80 g·l^–1 of ethanol using initial dextrin concentrations of 200 and 250 g·l^–1 respectively. The corresponding values for ethanol productivity were 12.7 and 9.6 g·l^–1·h^–1. The productivity of the immobilized cell systems was higher than for the batch systems, but much lower than for glucose fermentation.     

Continuous alcohol fermentation in an immobilized cell rotating disk reactor

The increasing interest in alcohol fermentation over these last years because of the energy crisis has been demonstrated by an increase in scientific research. After a brief analysis of the main results of the literature in the field of alcohol fermentation reactors, the use of a new type of immobilized cell reactor [the rotating biological surface (RBS) reactor] was studied. As is well known, the RBS reactor is a form of fixed-film reactor and can be described as a dynamic trickling filter. Our experimental apparatus employed a spongy material to trap the yeast cells on the disks. The results of fermentations carried out in the RBS reactor working in batch, in continuous with cell support, and in continuous without cell support have been presented in order to compare the different productivities and to assess the performance of the RBS immobilized cell reactor. An ethanol productivity of 7.1 g/L h was achieved in the RBS-ICR at a dilution rate of 0.3 h(-1), 2.5 times higher than the maximum productivity obtained in the RBS reactor without support at a lower dilution rate. The adoption of a spongy material as a cell immobilizer, combined with the use of the RBS reactor, enhances the particular advantages of both systems.     

Modulation of anti-pathogenic activity in canine-derived Lactobacillus species by carbohydrate growth substrate

AIMS: To investigate the effect of various carbon sources on the production of extracellular antagonistic compounds against two Escherichia coli strains and Salmonella enterica serotype Typhimurium by three canine-derived lactobacilli strains. METHODS AND MATERIALS: Cell-free preparations, pH neutralized, were used in antibiotic disc experiments as an initial screening. The bacteria/carbohydrate combinations that showed inhibition of the growth of those pathogens, were further investigated in batch co-culture experiments. The cell-free supernatants of the cultures, that decreased the population number of the pathogens in the co-culture experiments to log CFU ml-1 相似文献