Sensing specific molecular interactions with the atomic force microscope

One of the unique features of the atomic force microscope (AFM) is its capacity to measure interactions between tip and sample with high sensitivity and unparalleled spatial resolution. Since the development of methods for the functionalization of the tips, the versatility of the AFM has been expanded to experiments where specific molecular interactions are measured. For illustration, we present measurements of the interaction between complementary strands of DNA. A necessary prerequisite for the quantitative analysis of the interaction force is knowledge of the spring constant of the cantilevers. Here, we compare different techniques that allow for the in situ measurement of the absolute value of the spring constant of cantilevers.     

The EcoRI-DNA complex as a model for investigating protein-DNA interactions by atomic force microscopy

Atomic force microscopy (AFM) is a technique widely used to image protein-DNA complexes, and its application has now been extended to the measurements of protein-DNA binding constants and specificities. However, the spreading of the protein-DNA complexes on a flat substrate, generally mica, is required prior to AFM imaging. The influence of the surface on protein-DNA interactions is therefore an issue which needs to be addressed. For that purpose, the extensively studied EcoRI-DNA complex was investigated with the aim of providing quantitative information about the surface influence. The equilibrium binding constant of the complex was determined by AFM at both low and high ionic strengths and compared to electrophoretic mobility shift assay measurements (EMSA). In addition, the effect of the DNA length on dissociation of the protein from its specific site was analyzed. It turned out that the AFM measurements are similar to those obtained by EMSA at high ionic strengths. We then advance the idea that this effect is due to the high counterion concentration near the highly negatively charged mica surface. In addition, a dissociation of the complexes once they are adsorbed onto the surface was observed, which is weakly dependent on the ionic strength contrary to what occurs in solution. Finally, a two-step mechanism, which describes the adsorption of the EcoRI-DNA complexes on the surface, is proposed. This model could also be extended to other protein-DNA complexes.     

Direct visualization of polypeptide shell of ferritin molecule by atomic force microscopy.

The polypeptide shell of the ferritin molecule has been imaged in water by atomic force microscopy (AFM). The central dip and the quaternary structure could be observed on the surface of the ferritin molecule anchored inhomogeneously in two dimensions. These structures observed in the AFM images are quite similar to the electron density map near the top of the apoferritin viewed down from a 4-fold axis structure reported previously (S. H. Banyard, D. K. Stammers, and P. M. Harrison, 1978. Nature (Lond.). 271:282-284). It has been achieved by introducing a "self-screening effect" of the surface charges of the AFM sample (S. Ohnishi, M. Hara, T. Furuno, and H. Sasabe. 1992. Biophys. J. 63:1425-1431) and the specially sharpened stylus of AFM cantilever.     

The height of biomolecules measured with the atomic force microscope depends on electrostatic interactions.

In biological applications of atomic force microscopy, the different surface properties of the biological sample and its support become apparent. Observed height differences between the biomolecule and its supporting surface are thus not only of structural origin, but also depend on the different sample-tip and support-tip interactions. This can result in negative or positive contributions to the measured height, effects that are described by the DLVO (Derjaguin, Landau, Verwey, Overbeek) theory. Experimental verification shows that the electrostatic interactions between tip and sample can strongly influence the result obtained. To overcome this problem, pH and electrolyte concentration of the buffer solution have to be adjusted to screen out electrostatic forces. Under these conditions, the tip comes into direct contact with the surface of support and biological system, even when low forces required to prevent sample deformation are applied. In this case, the measured height can be related to the thickness of the native biological structure. The observed height dependence of the macromolecules on electrolyte concentration makes it possible to estimate surface charge densities.     

Direct insertion of proteins into a living cell using an atomic force microscope with a nanoneedle

We have developed a tool for directly inserting proteins into living cells by using atomic force microscopy (AFM) and an ultrathin needle, termed a nanoneedle. The surface of the nanoneedle was modified with His-tagged proteins using nickel chelating nitrilotriaceticacid (NTA). The fluorescent proteins, DsRed2-His₆ and EGFP-His₆, could be attached to and detached from the surface of the nanoneedle. These results suggest that the Ni-NTA modified nanoneedle can successfully be used for specific delivery of proteins. The nanoneedle modified with DsRed2-His₆ was able to penetrate the surface of a living HeLa cell, as confirmed by laser scanning fluorescence microscopy and monitoring an exerting force on the nanoneedle using AFM. Force curves using the nanoneedle indicated that the needle was able to penetrate at displacement speeds of 0.10–10 μm/s. These results suggest that this technique can be used to directly insert proteins into living cells and is applicable for modulation or regulation of single cell activity.     

Mapping interaction forces with the atomic force microscope.

Force curves were recorded as the sample was raster-scanned under the tip. This opens new opportunities for imaging with the atomic force microscope: several characteristics of the samples can be measured simultaneously, for example, topography, adhesion forces, elasticity, van der Waals, and electrostatic interactions. The new opportunities are illustrated by images of several characteristics of thin metal films, aggregates of lysozyme, and single molecules of DNA.     

Direct measurement of single-molecule visco-elasticity in atomic force microscope force-extension experiments

Measuring the visco-elastic properties of biological macromolecules constitutes an important step towards the understanding of dynamic biological processes, such as cell adhesion, muscle function, or plant cell wall stability. Force spectroscopy techniques based on the atomic force microscope (AFM) are increasingly used to study the complex visco-elastic response of (bio-)molecules on a single-molecule level. These experiments either require that the AFM cantilever is actively oscillated or that the molecule is clamped at constant force to monitor thermal cantilever motion. Here we demonstrate that the visco-elasticity of single bio-molecules can readily be extracted from the Brownian cantilever motion during conventional force-extension measurements. It is shown that the characteristics of the cantilever determine the signal-to-noise (S/N) ratio and time resolution. Using a small cantilever, the visco-elastic properties of single dextran molecules were resolved with a time resolution of 8.3 ms. The presented approach can be directly applied to probe the dynamic response of complex bio-molecular systems or proteins in force-extension experiments. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Direct visualization of phosphorylase-phosphorylase kinase complexes by scanning tunneling and atomic force microscopy.

In skeletal muscle the activation of phosphorylase b is catalyzed by phosphorylase kinase. Both enzymes occur in vivo as part of a multienzyme complex. The two enzymes have been imaged by atomic force microscopy and the results compared to those previously found by scanning tunneling microscopy. Scanning tunneling microscopy and atomic force microscopy have been used to view complexes between the activating enzyme phosphorylase kinase and its substrate phosphorylase b. Changes in the size and shape of phosphorylase kinase were observed when it bound phosphorylase b.     

Imaging cells with the atomic force microscope

Different types of cells have been imaged with the atomic force microscope. The morphology of the archaebacterium Halobacterium halobium in its dry state was revealed. On a leaf of the small Indian tree Lagerstroemia subcostata a stoma was imaged. The lower side of a water lily leaf was imaged in water showing features down to 12 nm. Finally, fixed red and white blood cells were imaged in buffer showing features down to 8 nm. The images demonstrate that atomic force microscopy can provide high-resolution images of cell surfaces under physiological conditions.     

Using DNA as a fiducial marker to study SMC complex interactions with the atomic force microscope

Atomic force microscopy can potentially provide information on protein volumes, shapes, and interactions but is susceptible to variable tip-induced artifacts. In this study, we present an atomic force microscopy approach that can measure volumes of nonglobular polypeptides such as structural maintenance of chromosomes (SMC) proteins, and use it to study the interactions that occur within and between SMC complexes. Together with the protein of interest, we coadsorb a DNA molecule and use it as a fiducial marker to account for tip-induced artifacts that affect both protein and DNA, allowing normalization of protein volumes from images taken on different days and with different tips. This approach significantly reduced the error associated with volume analysis, and allowed determination of the oligomeric states and architecture of the Bacillus subtilis SMC complex, formed by the SMC protein, and by the smaller ScpA and ScpB subunits. This work reveals that SMC and ScpB are dimers and that ScpA is a stable monomer. Moreover, whereas ScpA binds directly to SMC, ScpB only binds to SMC in the presence of ScpA. Notably, the presence of both ScpA and ScpB favored the formation of higher-order structures of SMC complexes, suggesting a role for these subunits in the organization of SMC oligomers.     

Imaging biological structures with the cryo atomic force microscope.

It has long been recognized that one of the major limitations in biological atomic force microscopy (AFM) is the softness of most biological samples, which are easily deformed or damaged by the AFM tip, because of the high pressure in the contact area, especially from the very sharp tips required for high resolution. Another is the molecular motion present at room temperature due to thermal fluctuation. Using an AFM operated in liquid nitrogen vapor (cryo-AFM), we demonstrate that cryo-AFM can be applied to a large variety of biological samples, from immunoglobulins to DNA to cell surfaces. The resolution achieved with cryo-AFM is much improved when compared with AFM at room temperature with similar specimens, and is comparable to that of cryo-electron microscopy on randomly oriented macromolecules. We will also discuss the technical problems that remain to be solved for achieving even higher resolution with cryo-AFM and other possible applications of this novel technique.     

Direct visualization of KirBac3.1 potassium channel gating by atomic force microscopy

KirBac3.1 belongs to a family of transmembrane potassium (K⁺) channels that permit the selective flow of K-ions across biological membranes and thereby regulate cell excitability. They are crucial for a wide range of biological processes and mutations in their genes cause multiple human diseases. Opening and closing (gating) of Kir channels may occur spontaneously but is modulated by numerous intracellular ligands that bind to the channel itself. These include lipids (such as PIP₂), G-proteins, nucleotides (such as ATP) and ions (e.g. H⁺, Mg²⁺, Ca²⁺). We have used high-resolution atomic force microscopy (AFM) to examine KirBac3.1 in two different configurations. AFM imaging of the cytoplasmic surface of KirBac3.1 embedded in a lipid bilayer has allowed visualization of the tetrameric assembly of the ligand-binding domain. In the absence of Mg²⁺, the four subunits appeared as four protrusions surrounding a central depression corresponding to the cytoplasmic pore. They did not display 4-fold symmetry, but formed a dimer-of-dimers with 2-fold symmetry. Upon addition of Mg²⁺, a marked rearrangement of the intracellular ligand-binding domains was observed: the four protrusions condensed into a single protrusion per tetramer, and there was an accompanying increase in protrusion height. The central cavity within the four intracellular domains also disappeared on addition of Mg²⁺, indicating constriction of the cytoplasmic pore. These structural changes are likely transduced to the transmembrane helices, which gate the K⁺ channel. This is the first time AFM has been used as an interactive tool to study K⁺ channels. It has enabled us to directly measure the conformational changes in the protein surface produced by ligand binding.     

Direct visualization of the EcoRII-DNA triple synaptic complex by atomic force microscopy

Interactions between distantly separated DNA regions mediated by specialized proteins lead to the formation of synaptic protein-DNA complexes. This is a ubiquitous phenomenon which is critical in various genetic processes. Although such interactions typically occur between two sites, interactions among three specific DNA regions have been identified, and a corresponding model has been proposed. Atomic force microscopy was used to test this model for the EcoRII restriction enzyme and provide direct visualization and characterization of synaptic protein-DNA complexes involving three DNA binding sites. The complex appeared in the images as a two-loop structure, and the length measurements proved the site specificity of the protein in the complex. The protein volume measurements showed that an EcoRII dimer is the core of the three-site synaptosome. Other complexes were identified and analyzed. The protein volume data showed that the dimeric form of the protein is responsible for the formation of other types of synaptic complexes as well. The applications of these results to the mechanisms of the protein-DNA interactions are discussed.     

Imaging viscoelasticity by force modulation with the atomic force microscope

Force modulation and phase sensitive detection was used to image soft surfaces with the atomic force microscope. This force modulation microscopy allows the simultaneous recording of images of the surface profile, the storage modulus, and the loss modulus of the sample. A theoretical treatment of the elastic tip-sample interaction is given. As examples, images of Langmuir-Blodgett films of a polymeric amphiphile and of a structured fatty acid are presented.     

The study of protein mechanics with the atomic force microscope.

The unfolding and folding of single protein molecules can be studied with an atomic force microscope (AFM). Many proteins with mechanical functions contain multiple, individually folded domains with similar structures. Protein engineering techniques have enabled the construction and expression of recombinant proteins that contain multiple copies of identical domains. Thus, the AFM in combination with protein engineering has enabled the kinetic analysis of the force-induced unfolding and refolding of individual domains as well as the study of the determinants of mechanical stability.     

难溶性药用纳米微粒的原子力显微检测

建立用原子力显微镜(AFM)检测难溶性药用纳米微粒的方法。将纳米微粒配成一定浓度的悬浮液,以新鲜裂解的云母表面作为样品载体,在室温下用AFM的接触模式成像,用粒度分析软件进行粒度分析。以此方法对两种微粒(活性炭及氧化锌纳米微粒)进行了成像和测量,同时对两种样品进行透射电镜(TEM)观察。AFM检测结果显示,纳米活性炭微粒形态近似球形,表面较平滑,平均直径为(299±187)nm;纳米氧化锌微粒呈球形,平均直径(50±20)nm,与TEM检测结果具有较高一致性。该法简便可靠。     

Quantitative membrane electrostatics with the atomic force microscope

The atomic force microscope (AFM) is sensitive to electric double layer interactions in electrolyte solutions, but provides only a qualitative view of interfacial electrostatics. We have fully characterized silicon nitride probe tips and other experimental parameters to allow a quantitative electrostatic analysis by AFM, and we have tested the validity of a simple analytical force expression through numerical simulations. As a test sample, we have measured the effective surface charge density of supported zwitterionic dioleoylphosphatidylcholine membranes with a variable fraction of anionic dioleoylphosphatidylserine. The resulting surface charge density and surface potential values are in quantitative agreement with those predicted by the Gouy-Chapman-Stern model of membrane charge regulation, but only when the numerical analysis is employed. In addition, we demonstrate that the AFM can detect double layer forces at a separation of several screening lengths, and that the probe only perturbs the membrane surface potential by <2%. Finally, we demonstrate 50-nm resolution electrostatic mapping on heterogeneous model membranes with the AFM. This novel combination of capabilities demonstrates that the AFM is a unique and powerful probe of membrane electrostatics.