Additives to biological substances. V--The stability of lactose as a carrier for Biological Standards

The stability of freeze-dried lactose has been studied, by accelerated degradation, after being ampouled under the conditions employed for the preparation of International Standards and Reference Preparations and also under less stringent conditions which might facilitate degradation. The possible formation of the reactive product, 5-hydroxymethyl-furfural, has been monitored over a period of 10 years at temperatures up to 56 degrees C. No evidence has been obtained to suggest that the formation of this compound would present a hazard to the stability of standards prepared by the procedures customarily employed.     

Alternative methods for sampling and preservation of photosynthetic pigments and tocopherols in plant material from remote locations

Current methods for the study of pigments involve freezing in liquid nitrogen and storage at −80°C or lyophilization until HPLC analysis. These requirements greatly restrict ecophysiological research in remote areas where such resources are hardly available. We aimed to overcome such limitations by developing several techniques not requiring freezing or lyophilization. Two species with contrasting foliar characteristics (Olea europaea and Taraxacum officinale) were chosen. Seven preservation methods were designed, optimized and tested in a field trial. These protocols were compared with a control immediately frozen after collection. Pigments and tocopherols were analysed by HPLC. Main artefacts were chlorophyll epimerization or phaeophytinization, carotenoid isomerization, altered de-epoxidation index and tocopherol degradation. Among all methods, sample desiccation in silica gel provides robust samples (pigment composition was unaffected by storage time or temperature) and almost unaltered pigment profiles, except for a shift in epoxidation state. Although liquid nitrogen freezing and subsequent lyophilization or freezer storage were preferred, when these facilities are either not available or not suitable for long-distance transport, desiccation with silica gel, passive extraction in acetone and/or storage of fresh samples in water vapour saturated atmospheres enable a complete pigment characterization. Silica gel is advisable for long-term sample conservation.     

Comparative evaluation of three in vacuo dessication procedures on bacterial cultures

The paper presents results obtained for the bacterial cultures preservation (E. coli ATCC 25 922 and S. aureus Wood) by three in vacuo desiccation procedures: freeze-drying (lyophilization or cryo-desiccation at eutectic zone), cryo-desiccation above eutectic zone and direct drying. It has been in view: the survival of liquid cultures as reported to the desiccation procedure per se, the loss of viability of desiccated cultures stored in refrigerator for at least one year and the residual moisture of desiccated cultures. For 3 batches there has been applied the accelerated thermal degradation test. Employing the same protective medium for both cultures, E. coli cultures prove to be more easily affected by lyophilization and cryo-desiccation above eutectic zone as compared to S. aureus cultures, fact that may be due to the differences between the wall structures of G--bacteria and G+ bacteria, respectively. During storage, E. coli and S. aureus cultures proved a quite similar loss of viability. The residual moisture content was quite similar for both E. coli and S. aureus cultures exposed to the same in vacuo desiccation procedure. The lyophilization and the cryo-desiccation above eutectic zone, as compared to direct drying, yielded superior results. The accelerated thermal degradation test provides only informative results, partially confirmed by viable counts determined at stated intervals of storage time in the refrigerator.     

Intended use of reference products & WHO International Standards/Reference Reagents in the development of similar biological products (biosimilars)

Reference Products and WHO International Standards/Reference Reagents have roles to play in the development and characterization of similar biological products (SBPs). However, these roles are distinct and non-interchangeable. The uses of these materials and their limitations are considered in this paper.     

A radioreceptor assay for pharmaceutical preparations of insulin

A radioreceptor assay has been developed that is suitable for the measurement of the potency of crystalline insulin and pharmaceutical insulin formulations. It utilizes the well characterized and widely available IM-9 human lymphocyte cell line as the source of receptor. Bovine, porcine and human crystalline and formulated insulins have been assayed against the 4th International and European Standards for Insulin and the potencies compared with those obtained by the mouse blood glucose method. Results with bovine insulin were in full correspondence with the in vivo results. Porcine and human insulins were 15-20% more potent by the radioreceptor assay than by the in vivo method when the mixed bovine and porcine insulin 4th International and European Standards were used, but were equivalent when compared with like materials. Average 95% confidence limits for formulated insulins in two assays were +/- 6% of the mean. The coefficient of variation on repeated assay of the same sample was 3.8%. The three dose parallel line radioreceptor assay with appropriate species species standards is a candidate biological test capable of international adoption as an alternative to in vivo animal testing of insulin.     

Calibration of replacement international standards of diphtheria and tetanus toxoids for use in flocculation test

The 1st International Reference Reagents (IRR) of Diphtheria and Tetanus Toxoids for Flocculation Test (DIFT and TEFT) were established by the WHO in 1988. These reagents are essential for the standardization of assays used to calculate Lf units of toxoids. Candidate replacement materials were provided by several European vaccine manufacturers and were formulated and freeze-dried at NIBSC. This paper provides a summary of the results of an international collaborative study including 18 laboratories from 16 countries, which examined the candidate replacement materials in a variety of methods. Materials 02/176 and 04/150 were proposed and adopted by the Expert Committee on Biological Standardization of WHO in October 2007 as 2nd WHO International Standards of Diphtheria and Tetanus Toxoid for use in Flocculation Test. The replacement standards were assigned the value of 1100 and 690Lf/ampoule, respectively, based on results of flocculation tests carried out using provided reagents. Material coded 02/176 fully complied with the WHO specifications for stability, residual moisture content, precision of fill and sterility. Stability of material coded 04/150 was slightly lower than expected but predictions were based only on 2-year data and were to be further monitored, post-adoption.     

Metal contaminants promote degradation of lipid/DNA complexes during lyophilization

Oxidation reactions represent an important degradation pathway of nucleic acid-based pharmaceuticals. To evaluate the role of metal contamination and chelating agents in the formation of reactive oxygen species (ROS) during lyophilization, ROS generation and the stability of lipid/DNA complexes were investigated. Trehalose-containing formulations were lyophilized with different levels of transition metals. ROS generation was examined by adding proxyl fluorescamine to the formulations prior to freeze-drying. Results show that ROS were generated during lyophilization, and both supercoil content and transfection rates decreased as the levels of metal-induced ROS increased. The experiments incorporating chelators demonstrated that some of these agents (e.g., DTPA, desferal) clearly suppress ROS generation, while others (e.g., EDTA) enhance ROS. Surprisingly, there was not a strong correlation of ROS generated in the presence of chelators with the maintenance of supercoil content. In this study, we demonstrated the adverse effects of the presence of metals (especially Fe(2+)) in nonviral vector formulations. While some chelators attenuate ROS generation and preserve DNA integrity, the effects of these additives on vector stability during lyophilization are difficult to predict. Further study is needed to develop potent formulation strategies that inhibit ROS generation and DNA degradation during lyophilization and storage.     

Metal contaminants promote degradation of lipid/DNA complexes during lyophilization

Oxidation reactions represent an important degradation pathway of nucleic acid-based pharmaceuticals. To evaluate the role of metal contamination and chelating agents in the formation of reactive oxygen species (ROS) during lyophilization, ROS generation and the stability of lipid/DNA complexes were investigated. Trehalose-containing formulations were lyophilized with different levels of transition metals. ROS generation was examined by adding proxyl fluorescamine to the formulations prior to freeze-drying. Results show that ROS were generated during lyophilization, and both supercoil content and transfection rates decreased as the levels of metal-induced ROS increased. The experiments incorporating chelators demonstrated that some of these agents (e.g., DTPA, desferal) clearly suppress ROS generation, while others (e.g., EDTA) enhance ROS. Surprisingly, there was not a strong correlation of ROS generated in the presence of chelators with the maintenance of supercoil content. In this study, we demonstrated the adverse effects of the presence of metals (especially Fe²⁺) in nonviral vector formulations. While some chelators attenuate ROS generation and preserve DNA integrity, the effects of these additives on vector stability during lyophilization are difficult to predict. Further study is needed to develop potent formulation strategies that inhibit ROS generation and DNA degradation during lyophilization and storage.     

WHO international reference reagents for bovine and porcine proinsulins

Candidate preparations for International Reference Reagents (IRR) for immunoassays of bovine and porcine proinsulin were evaluated in an international collaborative study. With the authorization of the Expert Committee on Biological Standardization of WHO, the following preparations were established as IRRs: bovine proinsulin (code 84/514, defined ampoule content 25 micrograms) and porcine proinsulin (84/528, 20 micrograms). The content of ampoules of these materials is defined in terms of mass rather than international units of activity, therefore they are IRR rather than International Standards. Both preparations are intended as primary reference reagents for the calibration of immunoassays.     

Comparison of Titrations on the Chorioallantoic Membrane of Chick Embryos with the Rabbit Scarification Technique for the Potency Assay of Smallpox Vaccines

The potency of the U.S. Reference Smallpox Vaccine, Lot 2, the International Reference Preparation of Smallpox Vaccine, and commercial smallpox vaccines was determined by the chorioallantoic membrane (CAM) and rabbit scarification (RS) potency assay methods. The mean titer of the U.S. Reference (based on 107 ampoules) was 10(8.1) pock-forming units (PFU) per ml and that of the International Reference (based on 3 ampoules) was 10(7.8) PFU/ml. A statistical analysis of the CAM data for the U.S. Reference resulted in the establishment of a table of limits of acceptance for smallpox vaccines. Of the commercial smallpox vaccines tested by the CAM and RS methods, 89% demonstrated potencies comparable to the U.S. Reference. Our results show that the CAM test method has application in the control testing of smallpox vaccines produced by U.S. licensed manufacturers provided it is used within the limits discussed.     

Isothermal unfolding studies on the apo and holo forms of Plasmodium falciparum acyl carrier protein. Role of the 4'-phosphopantetheine group in the stability of the holo form of Plasmodium falciparum acyl carrier protein

The unfolding pathways of the two forms of Plasmodium falciparum acyl carrier protein, the apo and holo forms, were determined by guanidine hydrochloride-induced denaturation. Both the apo form and the holo form displayed a reversible two-state unfolding mechanism. The analysis of isothermal denaturation data provides values for the conformational stability of the two proteins. Although both forms have the same amino acid sequence, and they have similar secondary structures, it was found that the - DeltaG of unfolding of the holo form was lower than that of the apo form at all the temperatures at which the experiments were done. The higher stability of the holo form can be attributed to the number of favorable contacts that the 4'-phosphopantetheine group makes with the surface residues by virtue of a number of hydrogen bonds. Furthermore, there are several hydrophobic interactions with 4'-phosphopantetheine that firmly maintain the structure of the holo form. We show here for the first time that the interactions between 4'-phosphopantetheine and the polypeptide backbone of acyl carrier protein stabilize the protein. As Plasmodium acyl carrier protein has a similar secondary structure to the other acyl carrier proteins and acyl carrier protein-like domains, the detailed biophysical characterization of Plasmodium acyl carrier protein can serve as a prototype for the analysis of the conformational stability of other acyl carrier proteins.     

Stabilized procedure for the determination of urokinase fibrinolytic potency

A stabilized procedure for the determination of urokinase (UK) fibrinolytic potency is described in which method response is dependent on urokinase concentration and independent of normal variation in assay parameters. The method is a selective stability-indicating procedure for UK active enzyme. It is suitable for evaluation of both high molecular weight as well as low molecular weight urokinase fractions and is calibrated against the World Health Organization International Reference Preparation for UK code 66/46 using a biological six-point parallel line log-log dose-response approach where sample and standard are compared under essentially identical conditions. High method stability and sensitivity are achieved through the use of appropriate levels of purified human plasminogen and human plasma (source of fibrinogen) as primary and secondary substrates, respectively. Method precision versus house reference standard (%RSD less than or equal to 2%) is suitable for research and pharmaceutical purposes. The absolute UK potency reference plane established in the calibrated procedure is equivalent to that established by other investigators in the fibrinolytic field.     

Pluronic F68 enhanced the conformational stability of salmon calcitonin in both aqueous solution and lyophilized solid form

The effects of different surfactants on the conformational stability and structural similarity of salmon calcitonin (sCT) in aqueous solution and lyophilized forms were investigated by using microscopic Fourier transform infrared (FTIR) spectroscopy with second-derivative spectral analysis. Six surfactants, HCO-60, sodium dodecyl sulfate (SDS), Tween 80, PEG 400, Pluronic 68, and F127 were selected. The sCT aqueous solution with or without different surfactants was, respectively, incubated at 40°C for up to 35 h. sCT films were casted on the CaF(2) plates and IR spectra were collected as a function of incubation time. Second derivative analysis showed that the native sCT having a major α-helical structure was gradually changed to the combination of α-helix, random coil, and β-sheet conformations in aqueous solution at 40°C. Similar conformational changes with delayed β-sheet formation were obtained for sCT after co-incubation with all the surfactants except Pluronic F68. When the native sCT was freeze-dried alone, a marked conformational alteration was found as illustrated by a poor spectral correlation coefficient (r) value of 0.823 as compared to that of the unlyophilized native sCT. This r value was significantly deviated from 1, strongly indicating the influence of lyophilization stress on the surfactant-free sCT. The r value for sCT after lyophilizing with HCO-60, Pluronic F127, PEG 400, or Pluronic F68 was >0.9, suggesting the possible stabilization of these surfactants in the lyophilization process. The sCT sample after lyophilizing with Pluronic F68 showed a highest r value (>0.968), indicating the most optimal stabilization effect of Pluronic F68 for sCT sample via lyophilization. Pluronic F68 was found to be the preferential surfactant for preventing the secondary structure changes in aqueous solution at 40°C as well as in lyophilized powder.     

Microbiological study of lyophilized dairy kefir

Preservation of the intrinsic inhibitory power of dairy kefir after lyophilization by testing several desiccation substrates and several regeneration media was studied. The tested cryoprotectors were ribitol, sodium glutamate and glycerol. After lyophilization, the pellets of kefir were regenerated in water or milk. Glycerol was the best cryoprotector because of its high efficiency and its low cost, white sodium glutamate was unsatisfactory.     

Degradation products of insulin generated by hepatocytes and by insulin protease

The enzymatic mechanisms for insulin breakdown by hepatocytes have not been established, nor have the degradation products been identified. Several lines of evidence have suggested that the enzyme insulin protease is involved in insulin degradation by hepatocytes. To identify the products of insulin generated by insulin protease and to compare them with those produced by hepatocytes, we have incubated insulin specifically iodinated at either the B-16 or the B-26 tyrosines with insulin protease and with isolated hepatocytes, separated the products on high performance liquid chromatography (HPLC), and identified the B-chain cleavages. Insulin-sized products were obtained by Sephadex G-50 filtration. These insulin-sized products were injected on reverse-phase HPLC, and the peaks of radioactivity were identified. The product patterns generated by the enzyme and by hepatocytes were essentially identical with both isomers. The products were also sulfitolized to prepare the S-sulfonate derivatives of the B-chain and B-chain peptides. Again, the patterns on HPLC generated by the enzyme and by hepatocytes with both isomers were identical. Each of the original product peaks was also sulfitolized and injected separately on HPLC to relate B-chain peptides with product peaks. Again, the peptide compositions of the product peaks for both enzyme and hepatocytes were essentially identical. To identify the cleavage sites in the B-chain of insulin produced by insulin protease, the peptides from the degradation of [125I]iodo(B-26)insulin were purified and submitted to automated Edman degradation to identify the cycle in which radioactivity appeared. Seven peptides with cleavages on the amino side of the B26 residue were identified, and the cleavage sites were determined. Cleavages were found between B-9 and B-10 (Ser-His), B-10 and B-11 (His-Leu), B-14 and B-15 (Ala-Leu), B-13 and B-14 (Glu-Ala), B-16 and B-17 (Tyr-Leu), B-24 and B-25 (Phe-Phe), and B-25 and B-26 (Phe-Tyr). Peptides were also isolated from [125I]iodoinsulin incubated with isolated hepatocytes, and the cleavage sites in several of these were determined. These agreed exactly with the cleavage sites identified generated by the enzyme. The major peptides generated by the degradation of [125I]iodo(B-16)insulin were also isolated and sequenced, again showing identical cleavage sites.(ABSTRACT TRUNCATED AT 400 WORDS)     

Can tritiated water-dilution space accurately predict total body water in chukar partridges?

Total body water (TBW) volumes determined from the dilution space of injected tritiated water have consistently overestimated actual water volumes (determined by desiccation to constant mass) in reptiles and mammals, but results for birds are controversial. We investigated potential errors in both the dilution method and the desiccation method in an attempt to resolve this controversy. Tritiated water dilution yielded an accurate measurement of water mass in vitro. However, in vivo, this method yielded a 4.6% overestimate of the amount of water (3.1% of live body mass) in chukar partridges, apparently largely because of loss of tritium from body water to sites of dissociable hydrogens on body solids. An additional source of overestimation (approximately 2% of body mass) was loss of tritium to the solids in blood samples during distillation of blood to obtain pure water for tritium analysis. Measuring tritium activity in plasma samples avoided this problem but required measurement of, and correction for, the dry matter content in plasma. Desiccation to constant mass by lyophilization or oven-drying also overestimated the amount of water actually in the bodies of chukar partridges by 1.4% of body mass, because these values included water adsorbed onto the outside of feathers. When desiccating defeathered carcasses, oven-drying at 70 degrees C yielded TBW values identical to those obtained from lyophilization, but TBW was overestimated (0.5% of body mass) by drying at 100 degrees C due to loss of organic substances as well as water.(ABSTRACT TRUNCATED AT 250 WORDS)     

Insulin-induced changes in metabolism-related proteins during maize germination

Insulin regulates a wide range of metabolic processes in mammals, such as homeostasis and the breakdown of glucose. Recently, the existence of an insulin-related growth factor in maize (ZmIGF) and a possible receptor for this growth factor has been reported. This peptide exerts effects on plant growth and promotes germination by activating the target of rapamycin (TOR) signaling pathways, which is similar to the insulin response in mammals. In this study, we analyzed the insulin response in maize embryos using a proteomic approach. Our results indicated that insulin modulates the expression of proteins involved in processes, such as storage protein degradation, protein processing, redox and desiccation stress, and glucose metabolism. The involvement of TOR signaling pathways was analyzed using the TOR inhibitor, rapamycin. The results showed that the modulation of these proteins by insulin is independent of the TOR pathway. These results indicated that insulin promotes changes in metabolism-related proteins to ensure successful germination in maize.     

Liposomal budesonide for dry powder inhaler: Preparation and stabilization

The purpose of the study was to prepare stable liposomally entrapped budesonide (BUD) for a dry powder inhaler (DPI) formulation. BUD liposomes composed of egg phosphatidyl choline and cholesterol were prepared by lipid film hydration technique and sonicated to have the desired size (<5 μm). A rapid method was used for separation of free drug by centrifugation at a lower centrifugal force (G value). Liposomal dispersion was subjected to lyophilization after blending BUD with cryoprotectant in varying bulk and mass ratios, and percent drug remaining entrapped after lyophilization was optimized. Comparative drug retention studies on storage of DPI formulations were carried out in accordance with International Conference on Harmonization guidelines. Critical relative humidity of the formulations was determined and reported as one of the manufacturing controls. Sucrose was found to be the most effective cryoprotectant when present on both sides of the lamellae of liposomes in a bulk strength of 500 mM and mass ratio of lipid:sugar; 1∶10. Blending of sorbolac before lyophilization showed better retention of encapsulated drug (95.59%). The respirable fraction of the product (20.69±1.50%) was comparable with that of the control (26.49±1.52%), suggesting that the liposomal BUD can be successfully delivered throughout the broncho-pulmonary tree. The findings demonstrate that liposome of BUD can be prepared with a high entrapment value, stabilized by lyophilization, and delivered as an aerosolized DPI. The stability studies of lyophilized product suggests a shelf-life of one year when stored under refrigeration (2°C–8°C).