Evaluation of a countercurrent biosorption system for the removal of lead and copper from aqueous solutions

Abstract: An automated bench-scale countercurrent biosorption system (CBS) has been designed for the removal of metals from aqueous effluents. The system has been tested with activated sludge microorganisms as a biosorbent and lead and copper as model metals. Nearly 5 1 of a lead nitrate solution at 100 mg l⁻¹ of lead have been treated down to a final concentration of 0.1 mg l⁻¹ (99.9% removal) by using 4.8 g of dry biosorbent. Under similar conditions, copper chloride solutions at 100 mg 1⁻¹ of copper were treated down to a final concentration of 35–45 mg l^−l representing 60% removal. The advantage of the CBS is to maximize metal concentration in the biosorbent, from which the metal may thereby be recovered if desired. In addition, the CBS minimizes metal concentration in the treated effluent, which is the first objective of the treatment.     

A spiral bioreactor for removal and recovery of metals from aqueous wastes

Microorganisms from activated sludge were immobilized on a spiral reactor fabricated from a PVC-Silica based biosupport, and used to biosorb lead from synthetic waste streams. Biosorption parameters determined for lead from Freundlich isotherms indicate that 89% of the binding capacity of that observed in suspended cell system is retained in the spiral bioreactor. More than 87% of biosorbed lead was recovered each time after breakthrough by dilute acid washing between the pH of 2 to 2.5. No significant changes in the biosorption pattern was observed over several adsorption and recovery cycles that were conducted. The spiral bioreactor is better than suspended cell systems because it provides comparable surface area as that in the suspended cell system in an immobilized (small volume) form. It is also better than the entrapped microbial cell reactors because it eliminates mass transfer resistance across the external matrix, which may reduce the inherent binding capacity.This work was conducted at the New Jersey Institute of Technology Biotechnology Laboratory. The work was funded by the State of New Jersey Commission on Science and Technology under the Innovative Partnership Program. SRE, Inc. was the industrial co-investigator for the project. The authors would like to thank Dr. Daniel Watts of the Hazardous Substance Management Research Center at NJIT for his kind support.     

Application of seaweeds for the removal of lead from aqueous solution

Ten different seaweed species were compared on the basis of lead uptake at different pH conditions. The brown seaweed, Turbinaria conoides, exhibited maximum lead uptake (at pH 4.5) and hence was selected for further studies. Sorption isotherms, obtained at different pH (4–5) and temperature (25–35 °C) conditions were fitted using Langmuir and Sips models. According to the Langmuir model, the maximum lead uptake of 439.4 mg/g was obtained at optimum pH (4.5) and temperature (30 °C). The Sips model better described the sorption isotherms with high correlation coefficients at all conditions examined. Various thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated indicating that the present system was a spontaneous and endothermic process. Through potentiometric titrations, number of binding sites (carboxyl groups) and pK₁ were determined as 4.1 mmol/g and 4.4, respectively. The influence of co-ions (Na⁺, K⁺, Mg²⁺ and Ca²⁺) on lead uptake was well pronounced in the case of divalent ions compared to monovalent ions. The solution of 0.1 M HCl successfully eluted all lead ions from lead-loaded T. conoides biomass. The regeneration experiments revealed that the alga could be successfully reused for five cycles without any loss in lead biosorption capacity. A glass column (2 cm i.d. and 35 cm height) was used to study the continuous lead biosorption performance of T. conoides. At 25 cm (bed height), 5 ml/min (flow rate) and 100 mg/l (initial lead concentration), T. conoides exhibited lead uptake of 220.1 mg/g. The column was successfully eluted using 0.1 M HCl, with elution efficiency of 99.7%.     

Chemical activation of hickory and peanut hull hydrochars for removal of lead and methylene blue from aqueous solutions

Hickory and peanut hydrochars were chemically activated with KOH and H₃PO₄ and tested for their ability to remove methylene blue and lead from aqueous solutions. The physicochemical characteristics of the activated hydrochars determined were surface area, pore volume, and elemental composition. Kinetics and isotherm studies were then conducted on methylene blue adsorption. Compared to their nonactivated counterparts, the chemically activated hydrochars had higher surface areas and more functional groups. Activated hydrochars also had greater methylene blue and lead adsorption rates, which can be attributed to the improved physicochemical characteristics. H₃PO₄ activated hydrochars removed more contaminants than the corresponding KOH ones.     

Utilization of various agricultural wastes for activated carbon preparation and application for the removal of dyes and metal ions from aqueous solutions

Activated carbons were prepared from the agricultural solid wastes, silk cotton hull, coconut tree sawdust, sago waste, maize cob and banana pith and used to eliminate heavy metals and dyes from aqueous solution. Adsorption of all dyes and metal ions required a very short time and gave quantitative removal. Experimental results show all carbons were effective for the removal of pollutants from water. Since all agricultural solid wastes used in this investigation are freely, abundantly and locally available, the resulting carbons are expected to be economically viable for wastewater treatment.     

Removal of lead from aqueous solutions by Penicillium biomass

The removal of lead ions from aqueous solutions by adsorption on nonliving Penicillium chrysogenum biomass was studied. Biosorption of the Pb(+2) ion was strongly affected by pH. Within a pH range of 4 to 5, the saturated sorption uptake of Pb(+2) was 116 mg/g dry biomass, higher than that of activated charcoal and some other microorganisms. At pH 4.5, P. chrysogenum biomass exhibited selectivity for Pb(+2) over other metal ions such as Cd(+2), Cu(+2), Zn(+2), and As(+3) Sorption preference for metals decreased in the following order: Pb > Cd > Cu > Zn > As. The sorption uptake of Pb(+2) remained unchanged in the presence of Cu(+2) and As(+3), it decreased in the presence of Zn(+2), and increased in the presence of Cd(+2). (c) 1993 John Wiley & Sons, Inc.     

Phenol removal from aqueous solutions by peroxidase extracted from horseradish

Horseradish peroxidase (HRP) is one of the most recently used enzymes in the process of enzymatic phenol removal. It has a catalytic ability over a broad range of pH, temperature and contaminant concentrations. In this study we revealed the possibility of successful use the crude peroxidase obtained from horseradish roots for the phenol removal from aqueous solutions in the presence of the low molecular polyethylene glycol (PEG 300) at room temperature (20°C) and pH 7.2. Reaction was monitored by direct measuring of the absorbance changes in a samples taken at certain time intervals from the reaction mixture. At the first time PEG 300 was shown to be a more stabilizing effect on crude HRP and provided a higher phenol removal in comparison with PEG 3350. Crude HRP used in these study demonstrated a greater resistance on phenol and hydrogen peroxide inactivation that allowed a higher phenol removal. The highest phenol removal was achieved when the concentration of PEG 300, phenol and hydrogen peroxide were 300 mg/L, 2.0 and 2.5 mM, respectively.     

Favorable chitosan/cellulose film combinations for copper removal from aqueous solutions

Three well-formed film combinations of chitosan, in the beta form and cellulose acetate biopolymer, having different proportions, have been synthesized and characterized by X-ray diffraction and infrared spectroscopy. The film having a 1.0/0.50 proportion presented 6.87 mmol of nitrogen atoms per gram of synthesized hybrid, with the highest affinity for adsorbing copper from aqueous solutions at 298+/-1K. The isotherm obtained in this adsorption showed a saturation plateau that corresponds to 1.92 mmol of copper per gram of hybrid. The energetic effects caused by copper ion interaction were determined through calorimetric titration at the solid-liquid interface in aqueous solution and gave a net thermal effect that enabled the calculation of the exothermic enthalpic values and the equilibrium constant. The complete thermodynamic data showed that the system is favored by exothermic enthalpies, negative Gibbs free energies and positive entropies.     

Alginate coated loofa sponge discs for the removal of cadmium from aqueous solutions

A biosorbent was prepared by coating the fibrous network of loofa sponge (Luffa cylindrica) with a thin film of calcium alginate. Alginate-coated loofa sponge removed Cd(II) rapidly, reaching equilibrium loading of 124 mg g(-1) in 30 min. Seventy % of equilibrium uptake was achieved in 10 min. In contrast, it took 240 min for alginate beads to reach a loading equilibrium of 88 mg g(-1) under identical conditions. The biosorption behaviour followed the Langmuir adsorption isotherm and the ACLS biosorbent was shown to be highly effective in removing Cd(II) from a 10 mg l(-1) solution in a continuous flow fixed-bed column bioreactor.     

Aflatoxin M1 removal from aqueous solutions by Flavobacterium aurantiacum

In liquid cultures growing and stationary phase cells ofFlavobacterium aurantiacum NRRL B-184 eliminated aflatoxin M₁. Toxin concentrations of 15µg/ml and 37.5µg/ml interfered with bacterial growth, and at the higher level 4.4µg M₁ was removed from the growth medium by a milligram (dry weight) of bacteria. Toxin was completely removed from the liquid medium by incubating 5 × 10¹⁰ resting cells per milliliter with 8µg/ml of aflatoxin M₁ for 4 h. Attempted recovery of M₁ from cells following incubation of the bacteria with the toxin demonstrated that the M₁ was essentially nonextractable. Bacterial cells also removed aflatoxin M₁ from toxin-contaminated milk.     

Drin pesticides removal from aqueous solutions using acid-treated date stones

This work describes the potential applicability of chemically and thermally treated date stones for removing drin pesticides (aldrin, dieldrin and endrin) from aqueous solutions. The effect of several parameters, such as sorbent particle size, adsorbent dose, shaking speed, shaking time, concentration of pesticide solution and temperature, was evaluated by batch experiments. Pesticide determination was carried out using stir bar sorptive extraction and gas chromatography coupled with mass spectroscopy. Maximum removal efficiency (93%) was reached using 0.1 g of acid-treated date stones (ATDS) (63–100 μm) and 100 mL of aldrin (0.5 mg L⁻¹). The removal efficiency of drin pesticides decreased in the order of aldrin, dieldrin and endrin, and decreased as the temperature rose. Adsorption data were processed according to various kinetic models. Lagergren and Morris-Weber equations were applied to fit the kinetic results. The second order model was the most suitable on the whole, and intra-particle diffusion was found to be the rate-controlling the adsorption process. According to adsorption kinetic data, 3.5 h were considered as the equilibrium time for determining adsorption isotherms. Adsorption data were analyzed by the Langmuir, Freundlich and Dubinin–Radushkevich adsorption approaches. Experimental results showed that the Freundlich isotherm model best described the adsorption process. In addition, thermodynamic parameters such as ΔH, ΔS and ΔG were calculated. Negative values of ΔH and ΔG indicate the exothermic and spontaneous nature of pesticide adsorption on ATDS.     

Removal of lead from aqueous solutions on palm shell activated carbon

The performance of a commercially available palm shell based activated carbon to remove lead ions from aqueous solutions by adsorption was evaluated. The adsorption experiments were carried out at pH 3.0 and 5.0. The effect of malonic and boric acid presence on the adsorption of lead ions was also studied. Palm shell activated carbon showed high adsorption capacity for lead ions, especially at pH 5 with an ultimate uptake of 95.2mg/g. This high uptake showed palm shell activated carbon as amongst the best adsorbents for lead ions. Boric acid presence did not affect significantly lead uptake, whereas malonic acid decreased it. The diffuse layer surface complexation model was applied to predict the extent of adsorption. The model prediction was found to be in concordance with the experimental values.     

Removal of lead from aqueous solutions by agricultural waste maize bran

Maize bran is a low cost biosorbent that has been used for the removal of lead(II) from an aqueous solution. The effects of various parameters such as contact time, adsorbate concentration, pH of the medium and temperature were examined. Optimum removal at 20 degrees C was found to be 98.4% at pH 6.5, with an initial Pb(II) concentration of 100 mg l(-1). Dynamics of the sorption process and mass transfer of Pb(II) to maize bran were investigated and the values of rate constant of adsorption, rate constant of intraparticle diffusion and the mass transfer coefficients were calculated. Different thermodynamic parameters viz., changes in standard free energy, enthalpy and entropy were evaluated and it was found that the reaction was spontaneous and exothermic in nature. The adsorption data fitted the Langmuir isotherm. A generalized empirical model was proposed for the kinetics at different initial concentrations. The data were subjected to multiple regression analysis and a model was developed to predict the removal of Pb(II) from an aqueous solution.     

Inorganic nanoparticles for transfection of mammalian cells and removal of viruses from aqueous solutions

Owing to their small size, synthetic nanoparticles show unprecedented biophysical and biochemical properties which may foster novel advances in life-science research. Using flame-spray synthesis technology we have produced non-coated aluminum-, calcium-, cerium-, and zirconium-derived inorganic metal oxide nanoparticles which not only exhibit high affinity for nucleic acids, but can sequester such compounds from aqueous solution. This non-covalent DNA-binding capacity was successfully used to transiently transfect a variety of mammalian cells including human, reaching transfection efficiencies which compared favorably with classic calcium phosphate precipitation (CaP) procedures and lipofection. In this straightforward protocol, transfection was enabled by simply mixing nanoparticles with DNA in solution prior to addition to the target cell population. Transiently transfected cells showed higher production levels of the human secreted glycoprotein SEAP compared to isogenic populations transfected with established technologies. Inorganic metal oxide nanoparticles also showed a high binding capacity to human-pathogenic viruses including adenovirus, adeno-associated virus and human immunodeficiency virus type 1 and were able to clear these pathogens from aqueous solutions. The DNA transfection and viral clearance capacities of inorganic metal oxide nanoparticles may provide cost-effective biopharmaceutical manufacturing and water treatment in developing countries.     

Copper flotation waste from KGHM as potential sorbent for heavy metal removal from aqueous solutions

Sorption affinity of copper flotation waste from KGHM toward Cd(II), Cr(III), Cu(II), and Pb(II) ions was investigated in this work. Batch sorption studies, using single-element synthetic aqueous solutions at various pH (2–12), contact time (10–300 min), initial concentration (100–5000 mg dm^?3; 1–100 mg dm^?3 for Cd(II)) and adsorbent dose (25–200 g dm^?3), were performed. Bonding strength of adsorbed metals was tested from the degree of desorption. The maximum metal removal was observed at pH 5–8, ≥120 min reaction time, and 25 g dm^?3 adsorbent dose. Maximum sorption capacities of studied material were 41.6, 58.8, and 83.8 mg g^?1 for Cr(III), Cu(II), and Pb(II), respectively, for 5000 mg dm^?3 initial concentration, and 0.86 mg g^?1 for Cd(II) for initial concentration of 50 mg dm^?3. Sorption isotherms were very well fitted to Langmuir (Cd, Cr, Pb) and Freundlich (Cu) models. Sorption kinetics was nearly ideally fitted to pseudo-second-order kinetic model. Desorption studies showed that most of Cr(III) (98.5%) and Pb(II) (67.3%) ions remained bound to the surface, indicating that the chemisorption dominated as a controlling process. On the other hand, mostly desorbed were Cd(II) (98.5%) and Cu(II) (90.3%) ions, which indicated that processes like physisorption or precipitation were prevailing.     

Application of Arthrospira (Spirulina) platensis biomass for silver removal from aqueous solutions

The cyanobacterium Arthrospira (Spirulina) platensis was used to study the process of silver biosorption. Effects of various parameters such as contact time, dosage of biosorbent, initial pH, temperature, and initial concentration of Ag(I) were investigated for a batch adsorption system. The optimal biosorption conditions were determined as pH 5.0, biosorbent dosage of 0.4 g, and initial silver concentration of 30 mg/L. Equilibrium adsorption data were analyzed by the Langmuir and Freundlich models – however, the Freundlich model provided a better fit to the experimental data. The kinetic data fit the pseudo-second-order model well, with a correlation coefficient of 0.99. The analysis of thermodynamic parameters (ΔG°, ΔH° and ΔS°) revealed that the adsorption process of silver ion by spirulina biomass was exothermic and spontaneous (ΔG° < 0), and exothermic (ΔH° < 0) process. The biosorption capacity of biomass A. platensis serves as a basis for the development of green technology for environmental remediation.     

典型固体废物中冶金微生物及其浸出机理研究进展

典型固体废物(废电器、废电池、污泥、焚烧飞灰、废催化剂等)含有大量金属资源，回收再利用的价值极高。微生物浸出典型固体废物受多因素影响。对不同微生物浸出金属的菌种筛选、浸出规律和机理的掌握，有助于典型固体废物中金属资源的绿色高效回收，可为我国“双碳”目标作出贡献。本文综述了从典型固体废物中浸出金属的各类微生物，分析了冶金微生物的作用机制，并展望了微生物冶金的应用前景，以期为微生物冶金技术在典型固体废物中的高效应用提供理论参考。     

Efficient removal of atrazine from aqueous solutions using magnetic Saccharomyces cerevisiae bionanomaterial

Applied Microbiology and Biotechnology - A novel bionanomaterial comprising Saccharomyces cerevisiae (S. cerevisiae) and Fe3O4 nanoparticles encapsulated in a sodium alginate-polyvinyl alcohol...