Assembly and catalytic properties of retrovirus integrase-DNA complexes capable of efficiently performing concerted integration.

The in vitro assembly process for forming nucleoprotein complexes containing linear retrovirus-like DNA and integrase (IN) was investigated. Solution conditions that allowed avian myeloblastosis virus IN to efficiently pair two separate linear DNA fragments (each 487 bp in length) containing 3' OH recessed long terminal repeat termini were established. Pairing of the viral termini by IN during preincubation on ice permitted these nucleoprotein complexes to catalyze the concerted insertion of the two termini into a circular DNA target (full-site reaction), mimicking the in vivo reaction. The three major solution determinants were high concentrations of NaCl (0.33 M), 1,4-dioxane, and polyethylene glycol. The aprotic solvent dioxane (15%) was significantly better (sixfold) than 15% dimethyl sulfoxide for forming complexes capable of full-site rather than half-site integration events. Half-site reactions by IN involved the insertion of a single donor terminus into circular pGEM. Although NaCl was essential for the efficient promotion of the concerted integration reaction, dioxane was necessary to prevent half-site reactions from occurring at high NaCl concentrations. Under optimal solution conditions, the concerted integration reaction was directly proportional to a sixfold range of IN. The complexes appeared not to turn over, and few half-site donor-donor molecules were produced. In the presence of 0.15 or 0.35 M NaCl, dioxane prevented efficient 3' OH trimming of a blunt-ended donor by IN, suggesting that the complexes formed by IN with blunt-ended donors were different from those formed with donors containing 3' OH recessed termini for strand transfer. The results suggest that IN alone was capable of protein-protein and protein-DNA interactions that efficiently promote the in vitro concerted integration reaction.     

HIV-1 DNA integration: mechanism of viral DNA cleavage and DNA strand transfer.

Retroviral DNA integration involves a coordinated set of DNA cutting and joining reactions. Linear viral DNA is cleaved at each 3' end to generate the precursor ends for integration. The resulting recessed 3' ends are inserted into target DNA by a subsequent DNA strand transfer reaction. Purified HIV-1 integration protein carries out both of these steps in vitro. Two novel forms of the dinucleotide cleaved from HIV-1 DNA were identified and one, a cyclic dinucleotide, was used to analyze the stereochemical course of viral DNA cleavage. Both viral DNA cleavage and DNA strand transfer display inversion at chiral phosphorothioates during the course of the reaction. These results suggest that both reactions occur by a one-step mechanism without involvement of a covalent protein-DNA intermediate.     

Human immunodeficiency virus type 1 nucleocapsid protein specifically stimulates Mg2+-dependent DNA integration in vitro.

The integrase (IN) protein of the human immunodeficiency virus mediates integration of the viral DNA into the cellular genome. In vitro, this reaction can be mimicked by using purified recombinant IN and model DNA substrates. IN mediates two reactions: an endonucleolytic cleavage at each 3' end of the proviral DNA (terminal cleavage) and the joining of the linear viral DNA to 5' phosphates in the target DNA (strand transfer). Previous investigators have shown that purified IN requires Mn2+ or Mg2+ to promote strand transfer in vitro, although Mg2+ is the likely metal cofactor in vivo. IN activity in the presence of Mg2+ in vitro requires high IN concentrations and low concentrations of salt. Here, we show that the viral nucleocapsid protein NCp7 allows efficient IN-mediated strand transfer in the presence of Mg2+ at low enzyme concentrations. This potentiating effect appears to be unique to NCp7, as other small DNA-binding proteins, while capable of stimulating integration in the presence of Mn2+, all failed to stimulate strand transfer in the presence of Mg2+.     

Retroviral integration: in vitro host site selection by avian integrase.

Viral integrase catalyzes the integration of the linear viral DNA genome into the chromatin of the infected host cell, an essential step in the life cycle of retroviruses. The reaction produces a characteristic small duplication of host sequences at the site of integration, implying that there is a close juxtaposition of the viral DNA ends during a concerted integration event. We have used an in vitro assay to measure the concerted integration of virus-like plasmid DNA into naked lambda DNA catalyzed by virion purified avian integrase. In contrast to in vivo avian integration, which has strong fidelity for a 6-bp duplication, purified avian integrase in the context of this assay produced a distribution of duplication sizes, with the 6-bp size dominating. The metal cofactor Mg2+ induced increased fidelity for the 6-bp duplication relative to that with Mn2+. The immediate sequence of the host site may also influence duplication size in that we found sites that sustained multiple independent integration events producing the same duplication size. Additionally, for each set of cloned integration sites (5, 6, and 7 bp), a unique but similar symmetrical pattern of G/C and A/T sequence biases was found. Using duplex oligonucleotides as target substrates, we tested the significance of the 6-bp G/C and A/T pattern for site selection. In the context of this assay, which is likely dominated by the integration of only one viral end, the 6-bp pattern was not preferred. Instead, integration was predominantly into the 3' ends of the oligonucleotides. The combined results of the lambda and oligonucleotide assays indicated that although host site selection has properties in common with recognition of the viral DNA termini, the nonrandom sequence preferences seen for host site selection were not identical to the sequence requirements for long terminal repeat recognition.     

DNase protection analysis of retrovirus integrase at the viral DNA ends for full-site integration in vitro

Retrovirus intasomes purified from virus-infected cells contain the linear viral DNA genome and integrase (IN). Intasomes are capable of integrating the DNA termini in a concerted fashion into exogenous target DNA (full site), mimicking integration in vivo. Molecular insights into the organization of avian myeloblastosis virus IN at the viral DNA ends were gained by reconstituting nucleoprotein complexes possessing intasome characteristics. Assembly of IN-4.5-kbp donor complexes capable of efficient full-site integration appears cooperative and is dependent on time, temperature, and protein concentration. DNase I footprint analysis of assembled IN-donor complexes capable of full-site integration shows that wild-type U3 and other donors containing gain-of-function attachment site sequences are specifically protected by IN at low concentrations (<20 nM) with a defined outer boundary mapping ~20 nucleotides from the ends. A donor containing mutations in the attachment site simultaneously eliminated full-site integration and DNase I protection by IN. Coupling of wild-type U5 ends with wild-type U3 ends for full-site integration shows binding by IN at low concentrations probably occurs only at the very terminal nucleotides (<10 bp) on U5. The results suggest that assembly requires a defined number of avian IN subunits at each viral DNA end. Among several possibilities, IN may bind asymmetrically to the U3 and U5 ends for full-site integration in vitro.     

Genetic evidence that the avian retrovirus DNA endonuclease domain of pol is necessary for viral integration.

We used in vitro mutagenesis in the 3' region of the avian retrovirus polymerase (pol) gene to genetically define the role of the DNA endonuclease domain. In-frame insertional mutations, which were dispersed throughout the 5' region of pp32, produced a series of five replication-deficient mutants. In contrast, a single point mutant (Ala----Pro) located 48 amino acids from the NH2 terminus of pp32 exhibited a delayed replication phenotype. Molecular analysis of this mutant demonstrated that upon infection it was capable of synthesizing both linear and circular species of unintegrated viral DNA. The levels of unintegrated viral DNA present in cells infected with the mutant virus were several times greater than wild-type levels. Quantitation of the amount of integrated viral genomes demonstrated that the mutant virus integrated viral DNA one-fifth as efficiently as wild-type virus. This single point mutation in the NH2 terminus of pp32 prevented efficient integration of viral DNA, with no apparent effect on viral DNA synthesis per se. Thus, the DNA endonuclease domain has been genetically defined as necessary for avian retrovirus integration.     

Human immunodeficiency virus type 1 DNA integration: fine structure target analysis using synthetic oligonucleotides.

The target specificity of DNA strand transfer mediated by human immunodeficiency virus type 1 integrase was examined in vitro with synthetic oligonucleotides. Although insertion occurred at most locations in the target, some sites were preferred over others by at least 15-fold. Changing the nucleotide sequence of the target changed the distribution of preferred sites in complex ways, some of which included changes in target preference distant from the sequence alteration. Alignment of target sequences revealed that adenosine is preferred adjacent to the insertion site. Strand transfer occurred to within 2 nucleotides of the 3' end and to within 3 nucleotides of the 5' end of the target. This suggests that only 2 or 3 nucleotides flanking the target site are required for integration; such restricted contact with target DNA would allow integrase to insert the two ends of viral DNA into two closely spaced sites in host DNA, consistent with the concerted in vivo integration reaction that generates a 5-bp target duplication.     

Human immunodeficiency virus type 1 integration protein: DNA sequence requirements for cleaving and joining reactions.

Using purified integration protein (IN) from human immunodeficiency virus (HIV) type 1 and oligonucleotide mimics of viral and target DNA, we have investigated the DNA sequence specificity of the cleaving and joining reactions that take place during retroviral integration. The first reaction in this process is selective endonucleolytic cleaving of the viral DNA terminus that generates a recessed 3' OH group. This 3' OH group is then joined to a 5' phosphoryl group located at a break in the target DNA. We found that the conserved CA located close to the 3' end of the plus strand of the U5 viral terminus (also present on the minus strand of the U3 terminus) was required for both cleaving and joining reactions. Six bases of HIV U5 or U3 DNA at the ends of model substrates were sufficient for nearly maximal levels of selective endonucleolytic cleaving and joining. However, viral sequence elements upstream of the terminal 6 bases could also affect the efficiencies of the cleaving and joining reactions. The penultimate base (C) on the minus strand of HIV U5 was required for optimal joining activity. A synthetic oligonucleotide mimic of the putative in vivo viral "DNA" substrate for HIV IN, a molecule that contained a terminal adenosine 5'-phosphate (rA) on the minus strand, was indistinguishable in the cleaving and joining reactions from the DNA substrate containing deoxyadenosine instead of adenosine 5'-phosphate at the terminal position. Single-stranded DNA served as an in vitro integration target for HIV IN. The DNA sequence specificity of the joining reaction catalyzed in the reverse direction was also investigated.     

Stereospecificity of reactions catalyzed by HIV-1 integrase

The retroviral integrase catalyzes two successive chemical reactions essential for integration of the retroviral genome into a host chromosome: 3' end processing, in which a dinucleotide is cleaved from each 3' end of the viral DNA; and the integration reaction itself, in which the resulting recessed 3' ends of the viral DNA are joined to the host DNA. We have examined the stereospecificity of human immunodeficiency virus type 1 integrase for phosphorothioate substrates in these reactions and in a third reaction, disintegration, which is macroscopically the reverse of integration. Integrase preferentially catalyzed end processing and integration of a substrate with the (R(p))-phosphorothioate stereoisomer at the reaction center and disintegration of a substrate with an (S(p))-phosphorothiate at the reaction center. These results suggest a model for the architecture of the active site of integrase, and its interactions with key features of the viral and target DNA.     

Human immunodeficiency virus integrase protein requires a subterminal position of its viral DNA recognition sequence for efficient cleavage.

Retroviral integration requires cis-acting sequences at the termini of linear double-stranded viral DNA and a product of the retroviral pol gene, the integrase protein (IN). IN is required and sufficient for generation of recessed 3' termini of the viral DNA (the first step in proviral integration) and for integration of the recessed DNA species in vitro. Human immunodeficiency virus type 1 (HIV-1) IN, expressed in Escherichia coli, was purified to near homogeneity. The substrate sequence requirements for specific cleavage and integration of retroviral DNA were studied in a physical assay, using purified IN and short duplex oligonucleotides that correspond to the termini of HIV DNA. A few point mutations around the IN cleavage site substantially reduced cleavage; most other mutations did not have a drastic effect, suggesting that the sequence requirements are limited. The terminal 15 bp of the retroviral DNA were demonstrated to be sufficient for recognition by IN. Efficient specific cutting of the retroviral DNA by IN required that the cleavage site, the phosphodiester bond at the 3' side of a conserved CA-3' dinucleotide, be located two nucleotides away from the end of the viral DNA; however, low-efficiency cutting was observed when the cleavage site was located one, three, four, or five nucleotides away from the terminus of the double-stranded viral DNA. Increased cleavage by IN was detected when the nucleotides 3' of the CA-3' dinucleotide were present as single-stranded DNA. IN was found to have a strong preference for promoting integration into double-stranded rather than single-stranded DNA.     

Efficient autointegration of avian retrovirus DNA in vitro.

We have developed a cell-free system for an avian retrovirus that promotes autointegration, one-long-terminal-repeat (LTR) circle formation, and correct integration into exogenous target DNA. In this system, autointegration and one-LTR circle formation occurred far more frequently than integration into exogenous target DNA. Autointegration had the same characteristics of normal integration into target DNA except in its selection of target. Highly efficient autointegration as well as one-LTR circle formation in vitro suggest that there may be a mechanism to prevent these processes in vivo.     

Efficient concerted integration by recombinant human immunodeficiency virus type 1 integrase without cellular or viral cofactors

Replication of retroviruses requires integration of the linear viral DNA genome into the host chromosomes. Integration requires the viral integrase (IN), located in high-molecular-weight nucleoprotein complexes termed preintegration complexes (PIC). The PIC inserts the two viral DNA termini in a concerted manner into chromosomes in vivo as well as exogenous target DNA in vitro. We reconstituted nucleoprotein complexes capable of efficient concerted (full-site) integration using recombinant wild-type human immunodeficiency virus type I (HIV-1) IN with linear retrovirus-like donor DNA (480 bp). In addition, no cellular or viral protein cofactors are necessary for purified bacterial recombinant HIV-1 IN to mediate efficient full-site integration of two donor termini into supercoiled target DNA. At about 30 nM IN (20 min at 37 degrees C), approximately 15 and 8% of the input donor is incorporated into target DNA, producing half-site (insertion of one viral DNA end per target) and full-site integration products, respectively. Sequencing the donor-target junctions of full-site recombinants confirms that 5-bp host site duplications have occurred with a fidelity of about 70%, similar to the fidelity when using IN derived from nonionic detergent lysates of HIV-1 virions. A key factor allowing recombinant wild-type HIV-1 IN to mediate full-site integration appears to be the avoidance of high IN concentrations in its purification (about 125 microg/ml) and in the integration assay (<50 nM). The results show that recombinant HIV-1 IN may not be significantly defective for full-site integration. The findings further suggest that a high concentration or possibly aggregation of IN is detrimental to the assembly of correct nucleoprotein complexes for full-site integration.