Chemical modification of lysine residues in Bacillus alpha-amylases: effect on activity and stability

Chemical modification of lysine residues in two bacterial alpha-amylases, a mesophilic enzyme from Bacillus amyloliquefaciens (BAA) and a thermophilic enzyme from Bacillus licheniformis (BLA) was carried out using citraconic anhydride. 13 +/- 1 residues in BAA and 10 +/- 1 residues in BLA were found modified under defined experimental conditions. Modification brought about dramatic enhancement of thermal stability of BAA and catalytic activity of BLA. Such alterations were found dependent on the temperature and pH. Results obtained on Tm, the extent of deamidation, changes in the circular dichroism (CD) spectra and kinetic parameters before and after modification are discussed in terms of their contributions to the mechanism of irreversible thermoinactivation and activity enhancement.     

Structural stability and unfolding properties of thermostable bacterial alpha-amylases: a comparative study of homologous enzymes

In a comparative investigation on two thermostable alpha-amylases [Bacillus amyloliquefaciens (BAA), T(m) = 86 degrees C and Bacillus licheniformis (BLA), T(m) = 101 degrees C], we studied thermal and guanidine hydrochloride (GndHCl)-induced unfolding using fluorescence and CD spectroscopy, as well as dynamic light scattering. Depletion of calcium from specific ion-binding sites in the protein structures reduces the melting temperature tremendously for both alpha-amylases. The reduction is nearly the same for both enzymes, namely, in the order of 50 degrees C. Thus, the difference in thermostability between BLA and BAA (DeltaT(m) approximately 15 degrees C) is related to intrinsic properties of the respective protein structures themselves and is not related to the strength of ion binding. The thermal unfolding of both proteins is characterized by a full disappearance of secondary structure elements and by a concurrent expansion of the 3D structure. GndHCl-induced unfolding also yields a fully vanishing secondary structure but with more expanded 3D structures. Both alpha-amylases remain much more compact upon thermal unfolding as compared to the fully unfolded state induced by chemical denaturants. Such rather compact thermal unfolded structures lower the conformational entropy change during the unfolding transition, which principally can contribute to an increased thermal stability. Structural flexibilities of both enzymes, as measured with tryptophan fluorescence quenching, are almost identical for both enzymes in the native states, as well as in the unfolded states. Furthermore, we do not observe any difference in the temperature dependence of the structural flexibilities between BLA and BAA. These results indicate that conformational dynamics on the time scale of our studies seem not to be related to thermal stability or to thermal adaptation.     

Amino acid residues stabilizing a Bacillus alpha-amylase against irreversible thermoinactivation

The alpha-amylase of Bacillus licheniformis (BLA) is stable and active at high temperature. More than 80% of its activity is retained after heat treatment at 90 degrees C for 30 min, and the optimum temperature for its activity is 80-85 degrees C. In contrast, the alpha-amylase of Bacillus amyloliquefaciens (BAA), the amino acid sequence of which shows 80% homology with that of BLA, is rapidly inactivated at 90 degrees C. Various chimeric genes were constructed from the structural genes for the two enzymes, and their products were analyzed for stability as to irreversible thermoinactivation. Two regions in the amino acid sequence of BLA comprising Gln178 (region I) and the 255th-270th residues (region II), respectively, were shown to determine the thermostability of BLA. Region I plays a major role in determining the thermostability. By means of site-directed mutagenesis of the BAA gene, deletion of Arg176 and Gly177 in region I and substitutions of alanine for Lys269 and aspartic acid for Asn266 in region II were shown to be responsible for the enhancement of the thermostability. Mutant BAAs containing the above deletion and substitutions showed almost the same thermostability as BLA as to irreversible thermoinactivation. Nevertheless, the mutant BAAs showed a temperature optimum as low as that of BAA (65 degrees C), indicating that they are still susceptible to reversible inactivation at temperatures higher than 65 degrees C.     

Comparative studies on trifluoroethanol (TFE) state of a thermophilic alpha-amylase and its mesophilic counterpart: limited proteolysis, conformational analysis, aggregation and reactivation of the enzymes

Detailed circular dichroism (CD), scattering and quenching studies, 1-anilinonaphthalene-8-sulfonate (ANS) binding, irreversible thermoinactivation, activity measurements and proteolytic digestion of bacterial alpha-amylases have been carried out to elucidate the effect of trifluoroethanol (TFE) on the structure of these enzymes. Under high concentrations of TFE both of the alpha-amylases, a thermostable alpha-amylase from Bacillus licheniformis (BLA) and its mesophilic counterpart from Bacillus amyloliquefaciens (BAA), acquire partially folded state characterized by an enhanced content of the secondary structure (helix) and reduced tertiary structures. According to ANS binding studies, we suggest that the TFE states induced by TFE/water mixture are not the molten globule state in the alpha-amylase folding pathway. In addition, data shows significant reversible aggregation of both enzymes in TFE/water mixtures with concentration between 10 and 60% (v/v). However, reversibility is more in case of BAA. As expected, in the absence of TFE, the thermophilic enzyme compared to mesophilic enzyme, shows a greater resistance to digestion by thermolysin. With respect to fluorescence quenching by acrylamide and potassium iodide, the thermophilic enzyme, BLA, is characterized by higher structural flexibility as compared to the BAA. On the other hand, in the presence of TFE, the enzymes are digested by protease to produce large protein fragments. It is proposed that highly helical secondary structures, acquired by BAA and BLA when dissolved in aqueous TFE, prevent binding and adaptation of the protein substrate at the active site of the protease.     

Comparison of the molten globule states of thermophilic and mesophilic alpha-amylases

In recent years great interest has been generated in the process of protein folding, and the formation of intermediates during the folding process has been proven with new experimental strategies. In the present work, we have examined the molten globule state of Bacillus licheniformis alpha-amylase (BLA) by intrinsic fluorescence and circular dichroism spectra, 1-anilino naphthalene-8-sulfonate (ANS) binding and proteolytic digestion by pepsin, for comparison to its mesophilic counterpart, Bacillus amyloliquefaciens alpha-amylase (BAA). At pH 4.0, both enzymes acquire partially folded state which show characteristics of molten globule state. They unfold in such a way that their hydrophobic surfaces are exposed to a greater extent compared to the native forms. Chemical denaturation studies by guanidine hydrochloride and proteolytic digestion with pepsin show that molten globule state of BLA is more stable than from BAA. Results from gel filtration indicate that BAA has the same compactness at pH 4.0 and 7.5. However, molten globule state of BLA is less compact than its native state. The effects of polyols such as trehalose, sorbitol and glycerol on refolding of enzymes from molten globule to native state were also studied. These polyols are effective on refolding of mesophilic alpha-amylase but only slightly effect on BLA refolding. In addition, the folding pathway and stability of intermediate state of the thermophilic and the mesophilic alpha-amylases are discussed.     

An analysis of temperature adaptation in cold active, mesophilic and thermophilic Bacillus α-amylases

A comparative biochemical and structural study was performed on a cold active α-amylase from Bacillus cereus (BCA) and two well-known homologous mesophilic and thermophilic α-amylases from Bacillus amyloliquefaciens (BAA) and Bacillus licheniformis (BLA). In spite of a high degree of sequence and structural similarity, drastic variations were found for T_opt as 50, 70 and 90 °C for BCA, BAA and BLA, respectively. The half-lives of thermoinactivation were 1 and 9 min for BCA and BAA at 80 °C respectively, whilst there was no inactivation for BLA at this temperature. Thermodynamic studies on inactivation process suggested that lower thermostability of BCA is due to lower inactivation slope of the Arrhenius plots and subsequently, lower E_a and ΔH^#. Increased K_m and accessible surface area for catalytic residues along with a decreased number of internal interactions in this region in BCA compared to BLA suggest that BCA substrate-binding site might be temperature sensitive and is probably more flexible. On the other hand, fewer ion pairs, destructive substitutions and disruption of aromatic interaction networks in structurally critical regions of Bacillus α-amylases result in a severe decrease in BCA thermostability compared to its mesophilic and thermophilic homologues.     

Hyperthermostabilization of Bacillus licheniformis alpha-amylase and modulation of its stability over a 50 degrees C temperature range

Bacillus licheniformis alpha-amylase (BLA) is a highly thermostable starch-degrading enzyme that has been extensively studied in both academic and industrial laboratories. For over a decade, we have investigated BLA thermal properties and identified amino acid substitutions that significantly increase or decrease the thermostability. This paper describes the cumulative effect of some of the most beneficial point mutations identified in BLA. Remarkably, the Q264S-N265Y double mutation led to a rather limited gain in stability but significantly improved the amylolytic function. The most hyperthermostable variants combined seven amino acid substitutions and inactivated over 100 times more slowly and at temperatures up to 23 degrees C higher than the wild-type enzyme. In addition, two highly destabilizing mutations were introduced in the metal binding site and resulted in a decrease of 25 degrees C in the half-inactivation temperature of the double mutant enzyme compared with wild-type. These mutational effects were analysed by protein modelling based on the recently determined crystal structure of a hyperthermostable BLA variant. Our engineering work on BLA shows that the thermostability of an already naturally highly thermostable enzyme can be substantially improved and modulated over a temperature range of 50 degrees C through a few point mutations.     

Investigation on the effects of three X-->histidine replacements on thermostability of alpha-amylase from Bacillus amyloliquefaciens

Bacillus licheniformis alpha-amylase (BLA), a thermophilic counterpart of Bacillus amyloliquefaciens alpha-amylase (BAA), is an appropriate model for the design of stabilizing mutations in BAA. BLA has 10 more histidines than BAA. Considering this prominent difference, in the present study, three out of these positions (I34, Q67, and P407; located in the thermostability determinant 1 region and Ca-III binding site of BAA) were replaced with histidine in BAA, using the site-directed mutagenesis technique. The results showed that the thermostability of P407H and Q67H mutants had increased, but no significant changes were observed in their kinetic parameters compared to that of the wild type. I34H replacement resulted in complete loss of enzyme activity. Moreover, fluorescence and circular dichroism data indicated a more rigid structure for the P407H variant compared with that of the wild-type BAA. However, the flexibility of Q67H and I34H mutants increased in comparison with that of wild-type enzyme.     

Effect of Glycosylation on the Catalytic and Conformational Stability of Homologous α-Amylases

summary. A thermostable -amylase from B. licheniformis (BLA) and a mesophilic amylase from B. amyloliquefaciens (BAA) were covalently coupled to oxidized synthetic sucrose polymers (OSP400 and OSP70) and polyglutaraldehyde (PGA) by reductive alkylation to study the effect of neoglycosylation on the activity, kinetic and thermodynamic stability. The catalytic efficiency of the modified enzymes was comparable to that of the native enzyme. Covalent coupling decreased the rate of inactivation at all the temperatures studied, both in the presence and absence of added Ca²⁺. The stability of the native enzyme was found to increase upon modification as observed from the increase in t_1/2 in the absence of Ca²⁺ ions by about 1.5–13.7 times (at 85°C) in the case of BLA and 5.7–8.4 times (at 50°C) for BAA. The highest stability was observed for OSP400 modified enzyme with C_m and T_m values of 0.63 M and 7.92°C for BLA and 0.85 M and 5.3°C for BAA, respectively. The order of stability was OSP400 > OSP70 > PGA > Native for both BLA and BAA. The stability of the modified amylases obtained from the present study were superior compared to most of the single and double mutants obtained by site-directed mutagenesis that were constructed so as to enhance the intrinsic stability of these enzymes.This article is dedicated to Dr. P.V. Sundaram.     

Distinct metal dependence for catalytic and structural functions in the L-arabinose isomerases from the mesophilic Bacillus halodurans and the thermophilic Geobacillus stearothermophilus

L-Arabinose isomerase (AI) catalyzes the isomerization of L-arabinose to L-ribulose. It can also convert d-galactose to d-tagatose at elevated temperatures in the presence of divalent metal ions. The araA genes, encoding AI, from the mesophilic bacterium Bacillus halodurans and the thermophilic Geobacillus stearothermophilus were cloned and overexpressed in Escherichia coli, and the recombinant enzymes were purified to homogeneity. The purified enzymes are homotetramers with a molecular mass of 232 kDa and close amino acid sequence identity (67%). However, they exhibit quite different temperature dependence and metal requirements. B. halodurans AI has maximal activity at 50 degrees C under the assay conditions used and is not dependent on divalent metal ions. Its apparent K(m) values are 36 mM for L-arabinose and 167 mM for d-galactose, and the catalytic efficiencies (k(cat)/K(m)) of the enzyme were 51.4 mM(-1)min(-1) (L-arabinose) and 0.4 mM(-1)min(-1) (d-galactose). Unlike B. halodurans AI, G. stearothermophilus AI has maximal activity at 65-70 degrees C, and is strongly activated by Mn(2+). It also has a much higher catalytic efficiency of 4.3 mM(-1)min(-1) for d-galactose and 32.5 mM(-1)min(-1)for L-arabinose, with apparent K(m) values of 117 and 63 mM, respectively. Irreversible thermal denaturation experiments using circular dichroism (CD) spectroscopy showed that the apparent melting temperature of B. halodurans AI (T(m)=65-67 degrees C) was unaffected by the presence of metal ions, whereas EDTA-treated G. stearothermophilus AI had a lower T(m) (72 degrees C) than the holoenzyme (78 degrees C). CD studies of both enzymes demonstrated that metal-mediated significant conformational changes were found in holo G. stearothermophilus AI, and there is an active tertiary structure for G. stearothermophilus AI at elevated temperatures for its catalytic activity. This is in marked contrast to the mesophilic B. halodurans AI where cofactor coordination is not necessary for proper protein folding. The metal dependence of G. stearothermophilus AI seems to be correlated with their catalytic and structural functions. We therefore propose that the metal ion requirement of the thermophilic G. stearothermophilus AI reflects the need to adopt the correct substrate-binding conformation and the structural stability at elevated temperatures.     

Nucleotide sequence, structural investigation and homology modeling studies of a Ca2+-independent alpha-amylase with acidic pH-profile

The novel alpha-amylase purified from locally isolated strain, Bacillus sp. KR-8104, (KRA) (Enzyme Microb Technol; 2005; 36: 666-671) is active in a wide range of pH. The enzyme maximum activity is at pH 4.0 and it retains 90% of activity at pH 3.5. The irreversible thermoinactivation patterns of KRA and the enzyme activity are not changed in the presence and absence of Ca(2+) and EDTA. Therefore, KRA acts as a Ca(2+)-independent enzyme. Based on circular dichroism (CD) data from thermal unfolding of the enzyme recorded at 222 nm, addition of Ca(2+) and EDTA similar to its irreversible thermoinactivation, does not influence the thermal denaturation of the enzyme and its T(m). The amino acid sequence of KRA was obtained from the nucleotide sequencing of PCR products of encoding gene. The deduced amino acid sequence of the enzyme revealed a very high sequence homology to Bacillus amyloliquefaciens (BAA) (85% identity, 90% similarity) and Bacillus licheniformis alpha-amylases (BLA) (81% identity, 88% similarity). To elucidate and understand these characteristics of the alpha-amylase, a model of 3D structure of KRA was constructed using the crystal structure of the mutant of BLA as the platform and refined with a molecular dynamics (MD) simulation program. Interestingly enough, there is only one amino acid substitution for KRA in comparison with BLA and BAA in the region involved in the calcium-binding sites. On the other hand, there are many amino acid differences between BLA and KRA at the interface of A and B domains and around the metal triad and active site area. These alterations could have a role in stabilizing the native structure of the loop in the active site cleft and maintenance and stabilization of the putative metal triad-binding site. The amino acid differences at the active site cleft and around the catalytic residues might affect their pKa values and consequently shift its pH profile. In addition, the intrinsic fluorescence intensity of the enzyme at 350 nm does not show considerable change at pH 3.5-7.0.     

Binding of Tris to Bacillus licheniformis alpha-amylase can affect its starch hydrolysis activity

Bacillus licheniformis alpha-amylase (BLA) is routinely used as a model thermostable amylase in biochemical studies. Its starch hydrolysis activity has recently been studied in Tris buffer. Here, we address the question that whether the application of Tris buffer may influence the results of BLA activity analyses. Based on the inhibition studies and docking simulations, we suggest that Tris molecule is a competitive inhibitor of starch-hydrolyzing activity of BLA, and it has a high tendency to bind the enzyme active site. Hence, it is critically important to consider such effect when interpreting the results of activity studies of this enzyme in Tris buffer.     

Comparison of starch hydrolysis activity and thermal stability of two Bacillus licheniformis alpha-amylases and insights into engineering alpha-amylase variants active under acidic conditions

Bacillus licheniformis alpha-amylase (BLA) is widely used in various procedures of starch degradation in the food industry, and a BLA species with improved activity at higher temperature and under acidic conditions is desirable. Two BLA species, designated as PA and MA, have been isolated from the wild-type B. licheniformis strain and a mutant strain, respectively. In this study, their starch-hydrolysis activity and thermal stability were examined. MA showed higher activity than PA, especially at acidic pH (pH 5.0-5.5), and even after 1 h of treatment at 90 degrees C. MA was active in the range of pH 4.0-8.0, which is much wider than that (pH 4.5-7.5) of PA. It was shown that the proton dissociation constants on the acidic and alkaline sides (pKa1 and pKa2) were shifted to more acidic and basic values, respectively, by the mutation of PA to MA. The activation energy and thermodynamic parameters for their thermal inactivation indicate that MA is more thermally stable and catalytically active than PA, suggesting that MA could be useful for glucose-production process coupled with reactions catalyzed by beta-amylase.     

Bivalent cations and amino-acid composition contribute to the thermostability of Bacillus licheniformis xylose isomerase.

Comparative analysis of genome sequence data from mesophilic and hyperthermophilic micro-organisms has revealed a strong bias against specific thermolabile amino-acid residues (i.e. N and Q) in hyperthermophilic proteins. The N + Q content of class II xylose isomerases (XIs) from mesophiles, moderate thermophiles, and hyperthermophiles was examined. It was found to correlate inversely with the growth temperature of the source organism in all cases examined, except for the previously uncharacterized XI from Bacillus licheniformis DSM13 (BLXI), which had an N + Q content comparable to that of homologs from much more thermophilic sources. To determine whether BLXI behaves as a thermostable enzyme, it was expressed in Escherichia coli, and the thermostability and activity properties of the recombinant enzyme were studied. Indeed, it was optimally active at 70-72 degrees C, which is significantly higher than the optimal growth temperature (37 degrees C) of B. licheniformis. The kinetic properties of BLXI, determined at 60 degrees C with glucose and xylose as substrates, were comparable to those of other class II XIs. The stability of BLXI was dependent on the metallic cation present in its two metal-binding sites. The enzyme thermostability increased in the order apoenzyme < Mg2+-enzyme < Co2+-enzyme approximately Mn2+-enzyme, with melting temperatures of 50.3 degrees C, 53.3 degrees C, 73.4 degrees C, and 73.6 degrees C. BLXI inactivation was first-order in all conditions examined. The energy of activation for irreversible inactivation was also strongly influenced by the metal present, ranging from 342 kJ x mol(-1) (apoenzyme) to 604 kJ x mol(-1) (Mg2+-enzyme) to 1166 kJ x mol(-1) (Co2+-enzyme). These results suggest that the first irreversible event in BLXI unfolding is the release of one or both of its metals from the active site. Although N + Q content was an indicator of thermostability for class II XIs, this pattern may not hold for other sets of homologous enzymes. In fact, the extremely thermostable alpha-amylase from B. licheniformis was found to have an average N + Q content compared with homologous enzymes from a variety of mesophilic and thermophilic sources. Thus, it would appear that protein thermostability is a function of more complex molecular determinants than amino-acid content alone.     

The consensus concept for thermostability engineering of proteins

Previously, sequence comparisons between a mesophilic enzyme and a more thermostable homologue were shown to be a feasible approach to successfully predict thermostabilizing amino acid substitutions. The 'consensus approach' described in the present paper shows that even a set of amino acid sequences of homologous, mesophilic enzymes contains sufficient information to allow rapid design of a thermostabilized, fully functional variant of this family of enzymes. A sequence alignment of homologous fungal phytases was used to calculate a consensus phytase amino acid sequence. Upon construction of the synthetic gene, recombinant expression and purification, the first phytase obtained, termed consensus phytase-1, displayed an unfolding temperature (T(m)) of 78.0 degrees C which is 15-22 degrees C higher than the T(m) values of all parent phytases used in its design. Refinement of the approach, combined with site-directed mutagenesis experiments, yielded optimized consensus phytases with T(m) values of up to 90.4 degrees C. These increases in T(m) are due to the combination of multiple amino acid exchanges which are distributed over the entire sequence of the protein and mainly affect surface-exposed residues; each individual substitution has a rather small thermostabilizing effect only. Remarkably, in spite of the pronounced increase in thermostability, catalytic activity at 37 degrees C is not compromised. Thus, the design of consensus proteins is a potentially powerful and novel alternative to directed evolution and to a series of rational approaches for thermostability engineering of enzymes and other proteins.     

Cytidine deaminase from two extremophilic bacteria: cloning, expression and comparison of their structural stability.

We cloned, purified and characterized two extremophilic cytidine deaminases: CDA(Bcald) and CDA(Bpsy), isolated from Bacillus caldolyticus (growth at 72 degrees C) and Bacillus psychrophilus (growth at 10 degrees C), respectively. We compared their thermostability also with the mesophilic counterpart, CDA(Bsubt), isolated from Bacillus subtilis (growth at 37 degrees C). The DNA fragments encoding CDA(Bcald) and CDA(Bpsy) were sequenced and the deduced amino acid sequences showed 70% identity. High sequence similarity was also found with the mesophilic CDA(Bsubt). Both enzymes were found to be homotetramers of approximately 58 kDa. CDA(Bcald) was found to be highly thermostable, as expected, up to 65 degrees C, whereas CDA(Bpsy) showed higher specific activity at lower temperatures and was considerably less thermostable than CDA(Bcald). After partial denaturation at 72 degrees C for 30 min, followed by renaturation on ice, CDA(Bcald) recovered 100% of its enzymatic activity, whereas CDA(Bpsy) as well as CDA(Bsubt) were irreversibly inactivated. Circular dichroism (CD) spectra of CDA(Bcald) and CDA(Bpsy) at temperatures ranging from 10 to 95 degrees C showed a markedly different thermostability of their secondary structures: at 10 and 25 degrees C the CD spectra were indistinguishable, suggesting a similar overall structure, but as temperature increases up to 50-70 degrees C, the alpha-helices of CDA(Bpsy) unfolded almost completely, whereas its beta-structure and the aromatic amino acids core remained pretty stable. No significant differences were seen in the secondary structures of CDA(Bcald) with increase in temperature.     

Probing structural determinants specifying high thermostability in Bacillus licheniformis alpha-amylase

Bacillus licheniformis alpha-amylase (BLA) is a starch-degrading enzyme that is highly thermostable although it is produced by a rather mesophilic organism. Over the last decade, the origin of BLA thermal properties has been extensively investigated in both academic and industrial laboratories, yet it is poorly understood. Here, we have used structure-based mutagenesis in order to probe the role of amino acid residues previously proposed as being important for BLA thermostability. Residues involved in salt-bridges, calcium binding or potential deamidation processes have been selected and replaced with various amino acids using a site-directed mutagenesis method, based on informational suppression. A total of 175 amylase variants were created and analysed in vitro. Active amylase variants were tested for thermostability by measuring residual activities after incubation at high temperature. Out of the 15 target residues, seven (Asp121, Asn126, Asp164, Asn192, Asp200, Asp204 and Ala269) were found to be particularly intolerant to any amino acid substitutions, some of which lead to very unstable mutant enzymes. By contrast, three asparagine residues (Asn172, Asn188 and Asn190) could be replaced with amino acid residues that significantly increase the thermostability compared to the wild-type enzyme. The highest stabilization event resulted from the substitution of phenylalanine in place of asparagine at position 190, leading to a sixfold increase of the enzyme's half-life at 80 degrees C (pH 5.6, 0.1 mM CaCl(2)).These results, combined with those of previous mutational analyses, show that the structural determinants contributing to the overall thermostability of BLA concentrate in domain B and at its interface with the central A domain. This region contains a triadic Ca-Na-Ca metal-binding site that appears extremely sensitive to any modification that may alter or reinforce the network of electrostatic interactions entrapping the metal ions. In particular, a loop spanning from residue 178 to 199, which undergoes pronounced conformational changes upon removal of calcium, appears to be the key feature for maintaining the enzyme structural integrity. Outside this region, most salt-bridges that were destroyed by mutations were found to be dispensable, except for an Asp121-Arg127 salt-bridge that contributes to the enhanced thermostability of BLA compared to other homologous bacterial alpha-amylases. Finally, our studies demonstrate that the natural resistance of BLA against high temperature is not optimized and can be enhanced further through various means, including the removal of possibly deamidating residues.     

Preparation of an active strain of Bacillus licheniformis--producer of thermostable alpha-amylase

A highly potent strain of Bacillus licheniformis 103 that synthesized thermostable alpha-amylase with temperature and pH optima of 90-95 degrees C and 6.0-8.5, respectively, was obtained by mutagenesis and selection. The composition of fermentation media and conditions for submerged cultivation of the producer were optimized. alpha-Amylase whose activity reached 260 U/ml was obtained in laboratory fermenters.     

Hydrolysis of soluble starch using Bacillus licheniformis alpha-amylase immobilized on superporous CELBEADS

In the present work, indigenously prepared rigid superporous (pore size of approximately 3 microm) cross-linked cellulose matrix (CELBEADS) has been used as a support for the immobilization of Bacillus licheniformis alpha-amylase (BLA). Optimum pH and temperature, and Michaelis-Menten constants were determined for both free and immobilized BLA. Immobilized BLA was observed to produce a different saccharide profile than free BLA at any value of dextrose equivalent. It was observed that pH, temperature, and initial starch concentration has a significant effect on the saccharide profile of starch hydrolysate produced using immobilized BLA in the batch mode, whereas the ratio of concentration of enzyme units to initial starch concentration has no influence on the same. Hence immobilized BLA can be used as an additional tool for production of maltodextrins with different saccharide profiles. Immobilized BLA has better thermostability than free BLA. Immobilized BLA was found to retain full activity even after eight batches of hydrolysis, each of 8h duration at 55 degrees C and 90 mg/mL initial starch concentration. A semiempirical model has been used for the prediction of saccharide composition of starch hydrolysate with respect to time.     

Characterization of a thermostable L-arabinose (D-galactose) isomerase from the hyperthermophilic eubacterium Thermotoga maritima

The araA gene encoding L-arabinose isomerase (AI) from the hyperthermophilic bacterium Thermotoga maritima was cloned and overexpressed in Escherichia coli as a fusion protein containing a C-terminal hexahistidine sequence. This gene encodes a 497-amino-acid protein with a calculated molecular weight of 56,658. The recombinant enzyme was purified to homogeneity by heat precipitation followed by Ni(2+) affinity chromatography. The native enzyme was estimated by gel filtration chromatography to be a homotetramer with a molecular mass of 232 kDa. The purified recombinant enzyme had an isoelectric point of 5.7 and exhibited maximal activity at 90 degrees C and pH 7.5 under the assay conditions used. Its apparent K(m) values for L-arabinose and D-galactose were 31 and 60 mM, respectively; the apparent V(max) values (at 90 degrees C) were 41.3 U/mg (L-arabinose) and 8.9 U/mg (D-galactose), and the catalytic efficiencies (k(cat)/K(m)) of the enzyme were 74.8 mM(-1).min(-1) (L-arabinose) and 8.5 mM(-1).min(-1) (D-galactose). Although the T. maritima AI exhibited high levels of amino acid sequence similarity (>70%) to other heat-labile mesophilic AIs, it had greater thermostability and higher catalytic efficiency than its mesophilic counterparts at elevated temperatures. In addition, it was more thermostable in the presence of Mn(2+) and/or Co(2+) than in the absence of these ions. The enzyme carried out the isomerization of D-galactose to D-tagatose with a conversion yield of 56% for 6 h at 80 degrees C.