Imaging proteins in live mammalian cells with biotin ligase and monovalent streptavidin

This protocol describes a simple and efficient way to label specific cell surface proteins with biophysical probes on mammalian cells. Cell surface proteins tagged with a 15-amino acid peptide are biotinylated by Escherichia coli biotin ligase (BirA), whereas endogenous proteins are not modified. The biotin group then allows sensitive and stable binding by streptavidin conjugates. This protocol describes the optimal use of BirA and streptavidin for site-specific labeling and also how to produce BirA and monovalent streptavidin. Streptavidin is tetravalent and the cross-linking of biotinylated targets disrupts many of streptavidin's applications. Monovalent streptavidin has only a single functional biotin-binding site, but retains the femtomolar affinity, low off-rate and high thermostability of wild-type streptavidin. Site-specific biotinylation and streptavidin staining take only a few minutes, while expression of BirA takes 4 d and expression of monovalent streptavidin takes 8 d.     

Expression and purification of E. coli BirA biotin ligase for in vitro biotinylation

The extremely tight binding between biotin and avidin or streptavidin makes labeling proteins with biotin a useful tool for many applications. BirA is the Escherichia coli biotin ligase that site-specifically biotinylates a lysine side chain within a 15-amino acid acceptor peptide (also known as Avi-tag). As a complementary approach to in vivo biotinylation of Avi-tag-bearing proteins, we developed a protocol for producing recombinant BirA ligase for in vitro biotinylation. The target protein was expressed as both thioredoxin and MBP fusions, and was released from the corresponding fusion by TEV protease. The liberated ligase was separated from its carrier using HisTrap HP column. We obtained 24.7 and 27.6 mg BirA ligase per liter of culture from thioredoxin and MBP fusion constructs, respectively. The recombinant enzyme was shown to be highly active in catalyzing in vitro biotinylation. The described protocol provides an effective means for making BirA ligase that can be used for biotinylation of different Avi-tag-bearing substrates.     

Redirecting lipoic acid ligase for cell surface protein labeling with small-molecule probes

Live cell imaging is a powerful method to study protein dynamics at the cell surface, but conventional imaging probes are bulky, or interfere with protein function, or dissociate from proteins after internalization. Here, we report technology for covalent, specific tagging of cellular proteins with chemical probes. Through rational design, we redirected a microbial lipoic acid ligase (LplA) to specifically attach an alkyl azide onto an engineered LplA acceptor peptide (LAP). The alkyl azide was then selectively derivatized with cyclo-octyne conjugates to various probes. We labeled LAP fusion proteins expressed in living mammalian cells with Cy3, Alexa Fluor 568 and biotin. We also combined LplA labeling with our previous biotin ligase labeling, to simultaneously image the dynamics of two different receptors, coexpressed in the same cell. Our methodology should provide general access to biochemical and imaging studies of cell surface proteins, using small fluorophores introduced via a short peptide tag.     

Ligand-linked structural changes in the Escherichia coli biotin repressor: the significance of surface loops for binding and allostery.

The Escherichia coli repressor of biotin biosynthesis (BirA) is an allosteric site-specific DNA-binding protein. BirA catalyzes synthesis of biotinyl-5'-AMP from substrates biotin and ATP and the adenylate serves as the positive allosteric effector in binding of the repressor to the biotin operator sequence. Although a three-dimensional structure of the apo-repressor has been determined by X-ray crystallographic techniques, no structures of any ligand-bound forms of the repressor are yet available. Results of previously published solution studies are consistent with the occurrence of conformational changes in the protein concomitant with ligand binding. In this work the hydroxyl radical footprinting technique has been used to probe changes in reactivity of the peptide backbone of BirA that accompany ligand binding. Results of these studies indicate that binding of biotin to the protein results in protection of regions of the central domain in the vicinity of the active site and the C-terminal domain from chemical cleavage. Biotin-linked changes in reactivity constitute a subset of those linked to adenylate binding. Binding of both bio-5'-AMP and biotin operator DNA suppresses cleavage at additional sites in the amino and carboxy-terminal domains of the protein. Varying degrees of protection of the five surface loops on BirA from hydroxyl radical-mediated cleavage are observed in all complexes. These results implicate the C-terminal domain of BirA, for which no function has previously been known, in small ligand and site-specific DNA binding and highlight the significance of surface loops, some of which are disordered in the apoBirA structure, for ligand binding and transmission of allosteric information in the protein.     

邻近标记在蛋白质组学中的发展及应用

人体内各种复杂的生命活动离不开蛋白质之间的相互作用。这种相互作用具有瞬时性和结合力弱等特点,并受到多种动态调节,特别是蛋白质翻译后修饰（post-translation modifications, PTM）。传统的亲和质谱检测方法存在蛋白纯化的局限性,在高效检测到动态变化方面存在不足。邻近标记是一种能够给与靶蛋白质瞬时靠近,或者互作（邻近）的蛋白质加上生物素的技术,它与质谱检测技术的联合使用能检测细胞过程中弱的、瞬时的蛋白质相互作用,有效解决上述问题。本文综述了基于生物素的邻近标记方法的发展现状,从依赖于融合序列的生物素标记开始,依次介绍有关生物素连接酶、过氧化物酶及其进化后的2代标记方法等经典生物素标记的方法和原理,比较各个方法间的差异和优缺点;也列举了一些近年来新出现的标记方法,如将生物素连接酶进行拆分、鉴定蛋白质在不同复合物中功能的方法、抗体靶向的标记方法,以及其他来源的生物素连接酶突变体,例如枯草芽孢杆菌（Bacillus subtilis）的C端氨基酸突变的生物素连接酶,能够应用在苍蝇和蠕虫中的生物素连接酶突变体。本文对这些方法进行归纳总结,旨在为初步接触该领域的科研工作者提供参考,同时也希望能够提供一些新的思路,推动蛋白质相互作用组学的发展。     

邻近标记在蛋白质组学中的发展及应用

人体内各种复杂的生命活动离不开蛋白质之间的相互作用。这种相互作用具有瞬时性和结合力弱等特点,并受到多种动态调节,特别是蛋白质翻译后修饰（post-translation modifications, PTM）。传统的亲和质谱检测方法存在蛋白纯化的局限性,在高效检测到动态变化方面存在不足。邻近标记是一种能够给与靶蛋白质瞬时靠近,或者互作（邻近）的蛋白质加上生物素的技术,它与质谱检测技术的联合使用能检测细胞过程中弱的、瞬时的蛋白质相互作用,有效解决上述问题。本文综述了基于生物素的邻近标记方法的发展现状,从依赖于融合序列的生物素标记开始,依次介绍有关生物素连接酶、过氧化物酶及其进化后的2代标记方法等经典生物素标记的方法和原理,比较各个方法间的差异和优缺点;也列举了一些近年来新出现的标记方法,如将生物素连接酶进行拆分、鉴定蛋白质在不同复合物中功能的方法、抗体靶向的标记方法,以及其他来源的生物素连接酶突变体,例如枯草芽孢杆菌（Bacillus subtilis）的C端氨基酸突变的生物素连接酶,能够应用在苍蝇和蠕虫中的生物素连接酶突变体。本文对这些方法进行归纳总结,旨在为初步接触该领域的科研工作者提供参考,同时也希望能够提供一些新的思路,推动蛋白质相互作用组学的发展。     

Design, production, and characterization of an engineered biotin ligase (BirA) and its application for affinity purification of staphylokinase produced from Bacillus subtilis via secretion

A major attraction in using Bacillus subtilis as an expression host for heterologous protein production is its ability to secrete extracellular proteins into the culture medium. To take full advantage of this system, an efficient method for recovering the target protein is crucial. For secretory proteins which cannot be purified by a simple scheme, in vitro biotinylation using biotin ligase (BirA) offers an effective alternative for their purification. The availability of large amounts of quality BirA can be critical for in vitro biotinylation. We report here the engineering and production of an Escherichia coli BirA and its application in the purification of staphylokinase, a fibrin-specific plasminogen activator, from the culture supernatant of Bacillus subtilis via in vitro biotinylation. BirA was tagged with both a chitin-binding domain and a hexahistidine tail to facilitate both its purification and its removal from the biotinylated sample. We show in this paper how, in a unique way, we solved the problem of protein aggregation in the E. coli BirA production system to achieve a yield of soluble functional BirA hitherto unreported in the literature. Application of this novel BirA to protein purification via in vitro biotinylation in general will also be discussed. Biotinylated staphylokinase produced in the study not only can act as an intermediate for easy purification, it can also serve as an important element in the creation of a blood clot targeting and dissolving agent.     

Promiscuous protein biotinylation by Escherichia coli biotin protein ligase

Biotin protein ligases (BPLs) are enzymes of extraordinary specificity. BirA, the BPL of Escherichia coli biotinylates only a single cellular protein. We report a mutant BirA that attaches biotin to a large number of cellular proteins in vivo and to bovine serum albumin, chloramphenicol acetyltransferase, immunoglobin heavy and light chains, and RNAse A in vitro. The mutant BirA also self biotinylates in vivo and in vitro. The wild type BirA protein is much less active in these reactions. The biotinylation reaction is proximity-dependent in that a greater extent of biotinylation was seen when the mutant ligase was coupled to the acceptor proteins than when the acceptors were free in solution. This approach may permit facile detection and recovery of interacting proteins by existing avidin/streptavidin technology.     

Metabolic biotinylation of secreted and cell surface proteins from mammalian cells

Due to its strength and specificity, the interaction between avidin and biotin has been used in a variety of medical and scientific applications ranging from drug targeting to immunohistochemistry. To maximize the application of this technology in mammalian systems, we recently demonstrated the ability to metabolically biotinylate tagged proteins in mammalian cells using the endogenous biotin ligase enzymes of the mammalian cell. This technology allows site-specific biotinylation without any exogenous reagents and eliminates possible inactivation of the protein of interest by nonspecific biotinylation. Here, we report further expansion of the mammalian metabolic biotinylation technology to enable biotinylation of proteins secreted from mammalian cells and expressed on their cell surface by cosecretion with BirA, the biotin ligase of E. coli. This technique can be used to biotinylate secreted proteins for purification or targeting and also for biotinylating the surfaces of mammalian cells to facilitate their labeling and purification from other nontagged cells.     

Co-repressor induced order and biotin repressor dimerization: a case for divergent followed by convergent evolution

BirA catalyzes the adenylation and subsequent covalent attachment of biotin to the biotin carboxyl carrier protein (BCCP). In the absence of apo-BCCP, biotin-5'-AMP acts as a co-repressor that induces BirA dimerization and binding to the bio operator to repress biotin biosynthesis. The crystal structures of apo-BirA, and BirA in complex with biotin have been reported. We here describe the 2.8A resolution crystal structure of BirA in complex with the co-repressor analog biotinol-5'-AMP. It was previously shown that the structure of apo-BirA is monomeric and that binding of biotin weakly induces a dimeric structure in which three disordered surface loops become organized to form the dimer interface. The structure of the co-repressor complex is also a dimer, clearly related to the BirA.biotin structure, but with several significant conformational changes. A hitherto disordered "adenylate binding loop" forms a well-defined structure covering the co-repressor. The co-repressor buttresses the dimer interface, resulting in improved packing and a 12 degrees change in the hinge-bending angle along the dimer interface relative to the BirA.biotin structure. This helps explain why the binding of the co-repressor is necessary to optimize the binding of BirA to the bioO operator. The structure reveals an unexpected use of the nucleotide-binding motif GXGXXG in binding adenylate and controlling the repressor function. Finally, based on structural analysis we propose that the class of adenylating enzymes represented by BirA, lipoate protein ligase and class II tRNA synthetases diverged early and were selected based on their ability to sequester co-factors or amino acid residues, and adenylation activity arose independently through functional convergence.     

Novel system for in vivo biotinylation and its application to crab antimicrobial protein scygonadin

BirA is a biotin ligase from Escherichia coli that specifically biotinylates a lysine side-chain within a 15-amino acid acceptor peptide (also known as Avi-tag). We developed a protocol for producing recombinant BirA ligase in E. coli for in vitro biotinylation (Li and Sousa, Prot Expr Purif, 82:162-167, 2012) in which the target protein was expressed as both thioredoxin and MBP fusions, and was released by TEV protease-mediated cleavage. The liberated ligase and the fusion proteins were enzymatically active. Based on that observation, we have now developed a novel system for in vivo biotinylation by co-expressing the Avi-tagged target protein with the MBP-BirA fusion. The effectiveness of this system was demonstrated by the successful in vivo labeling of antimicrobial protein, scygonadin. This new system shows improved efficiency compared with pre-existing one and this is likely attributed to the high expression level and solubility of the co-expressed MBP-BirA.     

A plasmid expression system for quantitative in vivo biotinylation of thioredoxin fusion proteins in Escherichia coli.

The high affinity binding interaction of biotin to avidin or streptavidin has been used widely in biochemistry and molecular biology, often in sensitive protein detection or protein capture applications. However, in vitro chemical techniques for protein biotinylation are not always successful, with some common problems being a lack of reaction specificity, inactivation of amino acid residues critical for protein function and low levels of biotin incorporation. This report describes an improved expression system for the highly specific and quantitative in vivo biotinylation of fusion proteins. A short 'biotinylation peptide', described previously by Schatz, is linked to the N-terminus of Escherichia coli thioredoxin (TrxA) to form a new protein, called BIOTRX. The 'biotinylation peptide' serves as an in vivo substrate mimic for E. coli biotin holoenzyme synthetase (BirA), an enzyme which usually performs highly selective biotinylation of E.coli biotin carboxyl carrier protein (BCCP). A plasmid expression vector carrying the BIOTRX and birA genes arranged as a bacterial operon can be used to obtain high level production of soluble BIOTRX and BirA proteins and, under appropriate culture conditions, BIOTRX protein produced by this system is completely biotinylated. Fusions of BIOTRX to other proteins or peptides, whether these polypeptides are linked to the C-terminus or inserted into the BIOTRX active site loop, are also quantitatively biotinylated. Both types of BIOTRX fusion can be captured efficiently on avidin/streptavidin media for purification purposes or to facilitate interaction assays. We illustrate the utility of the system by measurements of antibody and soluble receptor protein binding to BIOTRX fusions immobilized on streptavidin-conjugated BIAcore chips.     

An immobilized biotin ligase: surface display of Escherichia coli BirA on Saccharomyces cerevisiae

The Escherichia coli biotin ligase enzyme BirA has been extensively used in recent years to generate site-specifically biotinylated proteins via a biotin acceptor peptide tag. In the present study, BirA was displayed for the first time on the yeast Saccharomyces cerevisiae using the Aga1p-Aga2p platform and assayed using a peptide-tagged protein as the substrate. The enzyme is fully functional and resembles the soluble form in many of its properties, but the yeast-displayed enzyme demonstrates stability and reusability on the time scale of weeks. Thus, the yeast-displayed BirA system represents a facile and highly economical alternative for producing site-specifically biotinylated proteins.