A chromosomal genomics approach to assess and validate the desi and kabuli draft chickpea genome assemblies

With the expansion of next‐generation sequencing technology and advanced bioinformatics, there has been a rapid growth of genome sequencing projects. However, while this technology enables the rapid and cost‐effective assembly of draft genomes, the quality of these assemblies usually falls short of gold standard genome assemblies produced using the more traditional BAC by BAC and Sanger sequencing approaches. Assembly validation is often performed by the physical anchoring of genetically mapped markers, but this is prone to errors and the resolution is usually low, especially towards centromeric regions where recombination is limited. New approaches are required to validate reference genome assemblies. The ability to isolate individual chromosomes combined with next‐generation sequencing permits the validation of genome assemblies at the chromosome level. We demonstrate this approach by the assessment of the recently published chickpea kabuli and desi genomes. While previous genetic analysis suggests that these genomes should be very similar, a comparison of their chromosome sizes and published assemblies highlights significant differences. Our chromosomal genomics analysis highlights short defined regions that appear to have been misassembled in the kabuli genome and identifies large‐scale misassembly in the draft desi genome. The integration of chromosomal genomics tools within genome sequencing projects has the potential to significantly improve the construction and validation of genome assemblies. The approach could be applied both for new genome assemblies as well as published assemblies, and complements currently applied genome assembly strategies.     

A simplified,robust, and streamlined procedure for the production of <Emphasis Type="Italic">C. elegans</Emphasis>transgenes via recombineering

Background  

The nematode Caenorhabditis elegans has emerged as a powerful system to study biologic questions ranging from development to aging. The generation of transgenic animals is an important experimental tool and allows use of GFP fusion proteins to study the expression of genes of interest or generation of epitope tagged versions of specific genes. Transgenes are often generated by placing a promoter upstream of a reporter gene or cDNA. This often produces a representative expression pattern, but important exceptions have been observed. To better capture the genuine expression pattern and timing, several investigators have modified large pieces of DNA carried by BACs or fosmids for use in the construction of transgenic animals via recombineering. However, these techniques are not in widespread use despite the advantages when compared to traditional approaches. Additionally, some groups have encountered problems with employing these techniques. Hence, we sought identify ways to improve the simplicity and reliability of the procedure.     

Engineering hybrid genes without the use of restriction enzymes: gene splicing by overlap extension

Gene splicing by overlap extension is a new approach for recombining DNA molecules at precise junctions irrespective of nucleotide sequences at the recombination site and without the use of restriction endonucleases or ligase. Fragments from the genes that are to be recombined are generated in separate polymerase chain reactions (PCRs). The primers are designed so that the ends of the products contain complementary sequences. When these PCR products are mixed, denatured, and reannealed, the strands having the matching sequences at their 3' ends overlap and act as primers for each other. Extension of this overlap by DNA polymerase produces a molecule in which the original sequences are 'spliced' together. This technique is used to construct a gene encoding a mosaic fusion protein comprised of parts of two different class-I major histocompatibility genes. This simple and widely applicable approach has significant advantages over standard recombinant DNA techniques.     

Gap junctions: structure and function (Review)

Gap junctions are plasma membrane spatial microdomains constructed of assemblies of channel proteins called connexins in vertebrates and innexins in invertebrates. The channels provide direct intercellular communication pathways allowing rapid exchange of ions and metabolites up to approximately 1 kD in size. Approximately 20 connexins are identified in the human or mouse genome, and orthologues are increasingly characterized in other vertebrates. Most cell types express multiple connexin isoforms, making likely the construction of a spectrum of heteromeric hemichannels and heterotypic gap junctions that could provide a structural basis for the charge and size selectivity of these intercellular channels. The precise nature of the potential signalling information traversing junctions in physiologically defined situations remains elusive, but extensive progress has been made in elucidating how connexins are assembled into gap junctions. Also, participation of gap junction hemichannels in the propagation of calcium waves via an extracellular purinergic pathway is emerging. Connexin mutations have been identified in a number of genetically inherited channel communication-opathies. These are detected in connexin 32 in Charcot Marie Tooth-X linked disease, in connexins 26 and 30 in deafness and skin diseases, and in connexins 46 and 50 in hereditary cataracts. Biochemical approaches indicate that many of the mutated connexins are mistargeted to gap junctions and/or fail to oligomerize correctly into hemichannels. Genetic ablation approaches are helping to map out a connexin code and point to specific connexins being required for cell growth and differentiation as well as underwriting basic intercellular communication.     

Transgene delivery using poly(amino ether)-gold nanorod assemblies

Gold nanorods (GNRs) have emerged as promising nanomaterials for biosensing, imaging, photothermal treatment, and therapeutic delivery for several diseases, including cancer. We have generated poly(amino ether)-functionalized gold nanorods (PAE-GNRs) using a layer-by-layer deposition approach; polymers from a poly(amino ether) library recently synthesized in our laboratory were employed to generate the PAE-GNR assemblies. PAE-GNR assemblies demonstrate long-term colloidal stability as well as the capacity to bind plasmid DNA by means of electrostatic interactions. Sub-toxic concentrations of PAE-GNRs were employed to deliver plasmid DNA to prostate cancer cells in vitro. PAE-GNRs generated using 1,4C-1,4Bis, a cationic polymer from our laboratory demonstrated significantly higher transgene expression and exhibited lower cytotoxicities when compared to similar assemblies generated using 25 kDa poly(ethylene imine) (PEI25k-GNRs), a current standard for polymer-mediated gene delivery. The roles of polyelectrolyte chemistry and zeta-potential in determining transgene expression efficacies of PAE-GNR assemblies were investigated. Our results indicate that stable and effective PAE-GNR assemblies are a promising engineered platform for transgene delivery. PAE-GNRs also have the potential to be used simultaneously for photothermal ablation, photothermally enhanced drug and gene delivery, and biological imaging, thus making them a powerful theranostic platform.     

Developments in solution-state NMR yield broader and deeper views of the dynamic ensembles of nucleic acids

Nucleic acids do not fold into a single conformation, and dynamic ensembles are needed to describe their propensities to cycle between different conformations when performing cellular functions. We review recent advances in solution-state nuclear magnetic resonance (NMR) methods and their integration with computational techniques that are improving the ability to probe the dynamic ensembles of DNA and RNA. These include computational approaches for predicting chemical shifts from structure and generating conformational libraries from sequence, measurements of exact nuclear Overhauser effects, development of new probes to study chemical exchange using relaxation dispersion, faster and more sensitive real-time NMR techniques, and new NMR approaches to tackle large nucleic acid assemblies. We discuss how these advances are leading to new mechanistic insights into gene expression and regulation.     

Targeting the proteome/epitome,implementation of subtractive immunization

Monoclonal antibody technology has generated invaluable tools for both the analytical and clinical sciences. However, standard immunization approaches frequently fail to provide monoclonal antibodies with the desired specificity. Subtractive immunization provides a powerful alternative to standard immunization and allows for the production of truly unique antibodies. With the intent of targeting specific epitopes within the proteome, subtractive immunization has been broadly and successfully implemented for the production of monoclonal antibodies otherwise unobtainable by standard immunization. Subtractive immunization utilizes a distinct immune tolerization approach that can substantially enhance the generation of monoclonal antibodies to desired antigens. The approach is based on tolerizing the host animal to immunodominant or otherwise undesired antigen(s) (tolerogen) that may be structurally or functionally related to the antigen of interest. Tolerization of the host animal can be achieved through one of three methods: High Zone, Neonatal, or Drug-induced tolerization. The tolerized animal is then inoculated with the desired antigen (immunogen) and antibodies generated by the subsequent immune response are screened for the desired antigenic reactivity. Over the past 15 years a large number of investigators have used the subtractive approach with cleverly chosen tolerogen-immunogen combinations and successfully generated uniquely reactive antibodies which are often neutralizing or function-blocking. This review will focus on the implementation of subtractive immunization for the production of antibodies otherwise unobtainable by standard immunization.     

Biochemistry and structural DNA nanotechnology: an evolving symbiotic relationship

Structural DNA nanotechnology is derived from naturally occurring structures and phenomena in cellular biochemistry. Motifs based on branched DNA molecules are linked together by sticky ends to produce objects, periodic arrays, and nanomechanical devices. The motifs include Holliday junction analogues, double and triple crossover molecules, knots, and parallelograms. Polyhedral catenanes, such as a cube or a truncated octahedron, have been assembled from branched junctions. Stiff motifs have been used to produce periodic arrays, containing topographic features visible in atomic force microscopy; these include deliberately striped patterns and cavities whose sizes can be tuned by design. Deliberately knotted molecules have been assembled. Aperiodic arrangements of DNA tiles can be used to produce assemblies corresponding to logical computation. Both DNA structural transitions and branch migration have been used as the basis for the operation of DNA nanomechanical devices. Structural DNA nanotechnology has been used in a number of applications in biochemistry. An RNA knot has been used to establish the existence of RNA topoisomerase activity. The sequence dependence of crossover isomerization and branch migration at symmetric sites has been established through the use of symmetric immobile junctions. DNA parallelogram arrays have been used to determine the interhelical angles for a variety of DNA branched junctions. The relationship between biochemistry and structural DNA nanotechnology continues to grow.     

BACCardI--a tool for the validation of genomic assemblies, assisting genome finishing and intergenome comparison

SUMMARY: We provide the graphical tool BACCardI for the construction of virtual clone maps from standard assembler output files or BLAST based sequence comparisons. This new tool has been applied to numerous genome projects to solve various problems including (a) validation of whole genome shotgun assemblies, (b) support for contig ordering in the finishing phase of a genome project, and (c) intergenome comparison between related strains when only one of the strains has been sequenced and a large insert library is available for the other. The BACCardI software can seamlessly interact with various sequence assembly packages. MOTIVATION: Genomic assemblies generated from sequence information need to be validated by independent methods such as physical maps. The time-consuming task of building physical maps can be circumvented by virtual clone maps derived from read pair information of large insert libraries.     

Double-stranded DNA liquid-crystalline dispersions as biosensing units

Three different approaches to constructing biosensing units based on double-stranded (ds) DNA molecules, capable of detecting various biologically active compounds, are considered. The first approach is based on the abnormal optical activity of the liquid-crystalline dispersion formed from ds DNA molecules, modified by relevant physical factors or treated with biologically active compounds. The second one is based on the abnormal optical activity of the liquid-crystalline dispersions formed first from the ds DNA and then treated with coloured biologically active compounds. The third one is based on the abnormal optical activity, specific to particles of the liquid-crystalline dispersions, where the neighbouring DNA molecules are crosslinked by artificial polymeric bridges. These approaches permit the detection of biologically relevant compounds of various origins.     

Cyclic assemblies formed by metal ions, pyrimidines and isogeometrical heterocycles: DNA binding properties and antitumour activity

In this contribution, we discuss the use of simple pyrimidine derivatives and geometrically related heterocycles in combination with protected metal ions to build cyclic polynuclear coordination assemblies. The resulting assemblies range from conformationally rigid triangles to corrugated octagons with positively charged cavities and surfaces that can interact with anionic species in a supramolecular fashion. Special attention has been focussed to the supramolecular interaction of these systems towards mononucleotides and DNA as a possible novel interaction of DNA binding metallo-drugs. The results show that these systems efficiently interact with both mononucleotides and ds-DNA. The molecular recognition of ds-DNA leads to significant conformational changes, however, this interaction gives only rise to moderate cytotoxic effects towards tumour cell lines.     

Gap junctions: structure and function (Review)

Gap junctions are plasma membrane spatial microdomains constructed of assemblies of channel proteins called connexins in vertebrates and innexins in invertebrates. The channels provide direct intercellular communication pathways allowing rapid exchange of ions and metabolites up to ~1 kD in size. Approximately 20 connexins are identified in the human or mouse genome, and orthologues are increasingly characterized in other vertebrates. Most cell types express multiple connexin isoforms, making likely the construction of a spectrum of heteromeric hemichannels and heterotypic gap junctions that could provide a structural basis for the charge and size selectivity of these intercellular channels. The precise nature of the potential signalling information traversing junctions in physiologically defined situations remains elusive, but extensive progress has been made in elucidating how connexins are assembled into gap junctions. Also, participation of gap junction hemichannels in the propagation of calcium waves via an extracellular purinergic pathway is emerging. Connexin mutations have been identified in a number of genetically inherited channel communication-opathies. These are detected in connexin 32 in Charcot Marie Tooth-X linked disease, in connexins 26 and 30 in deafness and skin diseases, and in connexins 46 and 50 in hereditary cataracts. Biochemical approaches indicate that many of the mutated connexins are mistargeted to gap junctions and/or fail to oligomerize correctly into hemichannels. Genetic ablation approaches are helping to map out a connexin code and point to specific connexins being required for cell growth and differentiation as well as underwriting basic intercellular communication.     

Thermodynamics of DNA branching.

Branched DNA molecules arise transiently as intermediates in genetic recombination or on extrusion of cruciforms from covalent circular DNA duplexes that contain palindromic sequences. The free energy of these structures relative to normal DNA duplexes is of interest both physically and biologically. Oligonucleotide complexes that can form stable branched structures, DNA junctions, have made it possible to model normally unstable branched states of DNA such as Holliday recombinational intermediates. We present here an evaluation of the free energy of creating four-arm branch points in duplex DNA, using a system of two complementary junctions and four DNA duplexes formed from different combinations of the same set of eight 16-mer strands. The thermodynamics of formation of each branched structure from the matching pair of intact duplexes have been estimated in two experiments. In the first, labeled strands are allowed to partition between duplexes and junctions in a competition assay on polyacrylamide gels. In the second, the heats of forming branched or linear molecules from the component strands have been determined by titration microcalorimetry at several temperatures. Taken together these measurements allow us to determine the standard thermodynamic parameters for the process of creating a branch in an otherwise normal DNA duplex. The free energy for reacting two 16-mer duplexes to yield a four-arm junction in which the branch site is incapable of migrating is + 1.1 (+/- 0.4) kcal mol-1 (at 18 degrees C, 10 mM-Mg2+). Analysis of the distribution of duplex and tetramer products by electrophoresis confirms that the free energy difference between the four duplexes and two junctions is small at this temperature. The associated enthalpy change at 18 degrees C is +27.1 (+/- 1.3) kcal mol-1, while the entropy is +89 (+/- 30) cal K-1 mol-1. The free energy for branching is temperature dependent, with a large unfavorable enthalpy change compensated by a favorable entropy term. Since forming one four-stranded complex from two duplexes should be an entropically unfavorable process, branch formation is likely to be accompanied by significant changes in hydration and ion binding. A significant apparent delta Cp is also observed for the formation of one mole of junction, +0.97 (+/-0.05) kcal deg-1 mol-1.     

Identification of mixups among DNA sequencing plates

MOTIVATION: During the process of high-throughput genome sequencing there are opportunities for mixups of reagents and data associated with particular projects. The sequencing templates or sequence data generated for an assembly may become contaminated with reagents or sequences from another project, resulting in poorer quality and inaccurate assemblies. RESULTS: We have developed a system to assess sequence assemblies and monitor for laboratory mixups. We describe several methods for testing the consistency of assemblies and resolving mixed ones. We use statistical tests to evaluate the distribution of sequencing reads from different plates into contigs, and a graph-based approach to resolve situations where data has been inappropriately combined. While these methods have been designed for use in a high-throughput DNA sequencing environment processing thousands of clones, they can be applied in any situation where distinct sequencing projects are performed at redundant coverage.     

Adjacent satellite DNA segments in Drosophila: Structure of junctions

The structure of eight satellite DNA molecules containing a junction between tandem arrays of different repeated sequences is described. In one class of junctions there was an abrupt switch with the juxtaposition of two satellite arrays. These arrays were closely related and the periodicity of repeats was maintained in phase across the junction. These arrays usually showed extreme homogeneity in their repeating sequences. A second class of junctions was more complex, and in two cases may have arisen by the insertion of a mobile element into a satellite array. A novel mechanism of satellite formation is proposed to explain the precision of junctions and sequence similarities of neighboring satellite arrays. Homogeneous satellite arrays would be generated enzymatically by synthesis of a repeat using the preceding repeat as template. Occasional errors in copying of the template, either single base changes or misreading the length of the repeat unit, would lead to abrupt switches in the repeating sequence.     

When Is Hub Gene Selection Better than Standard Meta-Analysis?

Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when) hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data). Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis) and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility) in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA) in three comprehensive and unbiased empirical studies: (1) Finding genes predictive of lung cancer survival, (2) finding methylation markers related to age, and (3) finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1). However, standard meta-analysis methods perform as good as (if not better than) a consensus network approach in terms of validation success (criterion 2). The article also reports a comparison of meta-analysis techniques applied to gene expression data and presents novel R functions for carrying out consensus network analysis, network based screening, and meta analysis.     

Rapid screening of a large insert BAC library for specific 16S rRNA genes using TRFLP

It is widely believed that the vast majority of microbes in the environment have-yet-to-be cultured using standard techniques. Bulk DNA from microbial communities is therefore often cloned into large insert vectors (e.g. bacterial artificial chromosomes [BAC] or cosmids) in order to study the genetic properties of these as yet (un)-cultured bacteria. In a typical BAC experiment, tens of thousands of clones are generated with only a small fraction of colonies containing the target(s) of interest. Efficient screening methodologies are therefore needed to allow targeted clone isolation. In this paper, we describe a rapid, inexpensive protocol that allows for the identification of specific 16S ribosomal RNA genes in a metagenomic library arrayed into 384-well microtiter plates. The rapid screening protocol employs Terminal Restriction Fragment Length Polymorphism (TRFLP) analysis to identify wells containing specific T-RF peaks. A nested approach using multiplexed samples of 384, 48, 8, and single colony analysis is described and applied in order to survey a BAC library generated from a marine microbial community off the coast of New Jersey. Screening revealed a total of 50 different 16 rRNA genes within the BAC library. Overall, the multiplexing format provided a simple, cost effective methodology for detecting clones bearing a target gene of interest in a large clone library. However, the limitations of screening BAC libraries using PCR methodologies and recommendations for improved screening efficiency using this approach are also discussed.     

In vitro double transposition for DNA identification

We present a double transposition technique that inserts two different transposons into target DNA to act as priming sites for amplifying the region between the two transposons for sequencing applications. Unlike some current sequencing approaches, the genome of the unknown target remains intact in this method. The transposition reaction, DNA repair, and subsequent sequencing were performed entirely in vitro, without the need for transformation into bacteria, and resulted in sequence homology with the plasmid DNA target. This approach can reduce the time required for the assay by more than a day compared with standard techniques and reduces the number of required enzymatic steps. In addition, the in vitro method enables transposition to be carried out in automated microfluidic platforms without the need for significant sample manipulation. As a demonstration of incorporating transposition techniques into high-throughput technologies, single transposition reactions were carried out in picoliter-sized droplets generated on a microfluidic platform.     

Structures of helical junctions in nucleic acids

Our knowledge of the architectural principles of nucleic acid junctions has seen significant recent advances. The conformation of DNA junctions is now well understood, and this provides a new basis for the analysis of important structural elements in RNA. The most significant new data have come from X-ray crystallography of four-way DNA junctions; incidentally showing the great importance of serendipity in science, since none of the three groups had deliberately set out to crystallise a junction. Fortunately the results confirm, and of course extend, the earlier conformational studies of DNA junctions in almost every detail. This is important, because it means that these methods can be applied with greater confidence to new systems, especially in RNA. Methods like FRET, chemical probing and even the humble polyacrylamide gel can be rapid and very powerful, allowing the examination of a large number of sequence variants relatively quickly. Molecular modelling in conjunction with experiments is also a very important component of the general approach. Ultimately crystallography provides the gold standard for structural analysis, but the other, simple approaches have considerable value along the way. At the beginning of this review I suggested two simple folding principles for branched nucleic acids, and it is instructive to review these in the light of recent data. In brief, these were the tendency for pairwise coaxial stacking of helical arms, and the importance of metal ion interactions in the induction of folding. We see that both are important in a wide range of systems, both in DNA and RNA. The premier example is the four-way DNA junction, which undergoes metal ion-induced folding into the stacked X-structure that is based on coaxial stacking of arms. As in many systems, there are two alternative ways to achieve this depending on the choice of stacking partners. Recent data reveal that both forms often exist in a dynamic equilibrium, and that the relative stability of the two conformers depends upon base sequence extending a significant distance from the junction. The three-way junction has provided a good test of the folding principles. Perfect three-way (3H) DNA junctions seem to defy these principles in that they appear reluctant to undergo coaxial stacking of arms, and exhibit little change in conformation with addition of metal ions. Modelling suggests that such a junction is stereochemically constrained in an extended conformation. However, upon inclusion of a few additional base pairs at the centre (to create a 3HS2 junction for example) the additional stereochemical flexibility allows two arms to undergo coaxial stacking. Such a junction exhibits all the properties consistent with the general folding principles, with ion-induced folding into a form based on pairwise coaxial stacking of arms in one of two different conformers. The three-way junction is therefore very much the exception that proves the rule. It is instructive to compare the folding of corresponding species in DNA and RNA, where we find both similarities and differences. The RNA four-way junction can adopt a structure that is globally similar to the stacked X-structure (Duckett et al. 1995a), and the crystal structure of the DNAzyme shows that the stacked X-conformation can include one helical pair in the A-conformation (Nowakowski et al. 1999). However, modelling suggests that the juxtaposition of strands and grooves will be less satisfactory in RNA, and the higher magnesium ion concentration required to fold the RNA junction indicates a lower stability of the antiparallel form. Perhaps the biggest difference between the properties of the DNA and RNA four-way junctions is the lack of an unstacked structure at low salt concentrations for the RNA species. This clearly reflects a major difference in the electrostatic interactions in the RNA junction. In general the folding of branched DNA provides some good indications on the likely folding of the corresponding RNA species, but caution is required in making the extrapolation because the two polymers are significantly different. A number of studies point to the flexibility and malleability of branched nucleic acids, and this turns out to have particular significance in their interactions with proteins. Proteins such as the DNA junction-resolving enzymes exhibit considerable selectivity for the structure of their substrates, which is still not understood at a molecular level. Despite this, it appears to be universally true that these proteins distort the global, and in some cases at least the local, structure of the junctions. The somewhat perplexing result is that the proteins appear to distort the very property that they recognise. In general it seems that four-way DNA junctions are opened to one extent or another by interaction with proteins. (ABSTRACT TRUNCATED)     

Proteomic and electron microscopy survey of large assemblies in macrophage cytoplasm

Many cellular processes are carried out by large macromolecular assemblies. We systematically analyzed large macromolecular assemblies in the cytoplasm of mouse macrophages (RAW264.7 cell line), cells with crucial roles in immunity and inflammation. Fractionation of the cytoplasmic fraction was performed using sucrose density gradient centrifugation, and individual fractions were subjected in parallel to (i) identification of constituent proteins by mass spectrometry and (ii) structural visualization by electron microscopy. Macromolecular assemblies present in the fractions were analyzed by integrating available data using bioinformatic approaches. We identified 368 unique proteins in our sample. Among these are components of some well-characterized assemblies involved in diverse cellular processes and structures including translation, proteolysis, protein folding, metabolism, and the cytoskeleton, as well as less characterized proteins that may correspond to additional components of known assemblies or other homo- or hetero-oligomeric structures. Single-particle analysis of electron micrographs of negatively stained samples allowed the identification of clearly distinguishable two-dimensional projections of discrete protein assemblies. Among these, we can identify small ribosomal subunits and preribosomal particles, the 26S proteasome complex and small ringlike structures resembling the molecular chaperone complexes. In addition, a broad range of discrete and different complexes were seen at size ranges between 11 to 38 nm in diameter. Our procedure selects the assemblies on the basis of abundance and ease of isolation, and therefore provides an immediately useful starting point for further study of structure and function of large assemblies. Our results will also contribute toward building a molecular cell atlas.