Influence of Complex Nutrient Source on Growth of and Curvacin A Production by Sausage Isolate Lactobacillus curvatus LTH 1174

Lactobacillus curvatus LTH 1174, a fermented sausage isolate, produces the antilisterial bacteriocin curvacin A. Its biokinetics of cell growth and bacteriocin production as a function of various concentrations of a complex nutrient source were investigated in vitro during laboratory fermentations with modified MRS medium. A modification of the nutrient depletion model (Leroy and De Vuyst, Appl. Environ, Microbiol. 67:4470-4473, 2001) was used to fit the data describing growth and bacteriocin production. Both cell growth and bacteriocin activity were influenced by changes in the complex nutrient source concentration. Standard MRS medium clearly limited the growth of L. curvatus LTH 1174. Higher nutrient concentrations, up to a certain degree, led to improved growth, a higher attainable biomass concentration, and a higher bacteriocin activity in the supernatant. A lower concentration of complex nutrient source caused severe growth inhibition, leading to a lower biomass concentration but a much higher specific bacteriocin production. When examining the separate components of the complex nutrient source, a stimulating effect of bacteriological peptone on growth was found without an adverse effect on bacteriocin production, resulting in increased curvacin A activity. Furthermore, specific depletion of the amino acids tyrosine, serine, and asparagine/aspartic acid was observed for this strain.     

Sodium chloride reduces production of curvacin A, a bacteriocin produced by Lactobacillus curvatus strain LTH 1174, originating from fermented sausage

Lactobacillus curvatus LTH 1174, a strain originating in fermented sausage, produces the antilisterial bacteriocin curvacin A. Its biokinetics of cell growth and bacteriocin production as a function of various concentrations of salt (sodium chloride) were investigated in vitro during laboratory fermentations using modified MRS medium. A model was set up to describe the effects of different NaCl concentrations on microbial behavior. Both cell growth and bacteriocin activity were affected by changes in the salt concentration. Sodium chloride clearly slowed down the growth of L. curvatus LTH 1174, but more importantly, it had a detrimental effect on specific curvacin A production (k(B)) and hence on overall bacteriocin activity. Even a low salt concentration (2%, wt/vol) decreased bacteriocin production, while growth was unaffected at this concentration. The inhibitory effect of NaCl was mainly due to its role as an a(w)-lowering agent. Further, it was clear that salt interfered with bacteriocin induction. Additionally, when 6% (wt/vol) sodium chloride was added, the minimum biomass concentration necessary to start the production of curvacin A (X(B)) was 0.90 g (cell dry mass) per liter. Addition of the cell-free culture supernatant or a protein solution as a source of induction factor resulted in a decrease in X(B), an increase in k(B), and hence an increase in the maximum attainable bacteriocin activity.     

Effects of different spices used in production of fermented sausages on growth of and curvacin A production by Lactobacillus curvatus LTH 1174

Lactobacillus curvatus LTH 1174, a fermented sausage isolate, produces the listericidal bacteriocin curvacin A. The effect of different spices relevant for the production of fermented sausages was investigated in vitro through laboratory fermentations with a meat simulation medium and an imposed pH profile relevant for Belgian-type fermented sausages. The influence on the growth characteristics and especially on the kinetics of curvacin A production with L. curvatus LTH 1174 was evaluated. Pepper, nutmeg, rosemary, mace, and garlic all decreased the maximum specific growth rate, while paprika was the only spice that increased it. The effect on the lag phase was minor except for nutmeg and especially for garlic, which increased it, yet garlic was stimulatory for biomass production. The maximum attainable biomass concentration (X(max)) was severely decreased by the addition of 0.40% (wt/vol) nutmeg, while 0.35% (wt/vol) garlic or 0.80% (wt/vol) white pepper increased X(max). Nutmeg decreased both growth and bacteriocin production considerably. Garlic was the only spice enhancing specific bacteriocin production, resulting in higher bacteriocin activity in the cell-free culture supernatant. Finally, lactic acid production was stimulated by the addition of pepper, and this was not due to the manganese present because an amount of manganese that was not growth limiting was added to the growth medium. Addition of spices to the sausage mixture is clearly a factor that will influence the effectiveness of bacteriocinogenic starter cultures in fermented-sausage manufacturing.     

Sodium Chloride Reduces Production of Curvacin A, a Bacteriocin Produced by Lactobacillus curvatus Strain LTH 1174, Originating from Fermented Sausage

Lactobacillus curvatus LTH 1174, a strain originating in fermented sausage, produces the antilisterial bacteriocin curvacin A. Its biokinetics of cell growth and bacteriocin production as a function of various concentrations of salt (sodium chloride) were investigated in vitro during laboratory fermentations using modified MRS medium. A model was set up to describe the effects of different NaCl concentrations on microbial behavior. Both cell growth and bacteriocin activity were affected by changes in the salt concentration. Sodium chloride clearly slowed down the growth of L. curvatus LTH 1174, but more importantly, it had a detrimental effect on specific curvacin A production (k_B) and hence on overall bacteriocin activity. Even a low salt concentration (2%, wt/vol) decreased bacteriocin production, while growth was unaffected at this concentration. The inhibitory effect of NaCl was mainly due to its role as an a_w-lowering agent. Further, it was clear that salt interfered with bacteriocin induction. Additionally, when 6% (wt/vol) sodium chloride was added, the minimum biomass concentration necessary to start the production of curvacin A (X_B) was 0.90 g (cell dry mass) per liter. Addition of the cell-free culture supernatant or a protein solution as a source of induction factor resulted in a decrease in X_B, an increase in k_B, and hence an increase in the maximum attainable bacteriocin activity.     

The curing agent sodium nitrite,used in the production of fermented sausages,is less inhibiting to the bacteriocin-producing meat starter culture Lactobacillus curvatus LTH 1174 under anaerobic conditions

Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive to nitrite; even a concentration of 10 ppm of curing agent inhibited its growth and both volumetric and specific bacteriocin production. A meat simulation medium containing 5 ppm of sodium nitrite was tested to investigate the influence of the gas phase on the growth and bacteriocin production of L. curvatus LTH 1174. Aerating the culture during growth had no effect on biomass formation, but the oxidative stress caused a higher level of specific bacteriocin production and led to a metabolic shift toward acetic acid production. Anaerobic conditions, on the other hand, led to an increased biomass concentration and less growth inhibition. Also, higher maximum volumetric bacteriocin activities and a higher level of specific bacteriocin production were obtained in the presence of sodium nitrite than in fermentations under aerobic conditions or standard conditions of air supply. These results indicate that the inhibitory effect of the curing agent is at least partially masked under anaerobic conditions.     

Effects of Different Spices Used in Production of Fermented Sausages on Growth of and Curvacin A Production by Lactobacillus curvatus LTH 1174

Lactobacillus curvatus LTH 1174, a fermented sausage isolate, produces the listericidal bacteriocin curvacin A. The effect of different spices relevant for the production of fermented sausages was investigated in vitro through laboratory fermentations with a meat simulation medium and an imposed pH profile relevant for Belgian-type fermented sausages. The influence on the growth characteristics and especially on the kinetics of curvacin A production with L. curvatus LTH 1174 was evaluated. Pepper, nutmeg, rosemary, mace, and garlic all decreased the maximum specific growth rate, while paprika was the only spice that increased it. The effect on the lag phase was minor except for nutmeg and especially for garlic, which increased it, yet garlic was stimulatory for biomass production. The maximum attainable biomass concentration (X_max) was severely decreased by the addition of 0.40% (wt/vol) nutmeg, while 0.35% (wt/vol) garlic or 0.80% (wt/vol) white pepper increased X_max. Nutmeg decreased both growth and bacteriocin production considerably. Garlic was the only spice enhancing specific bacteriocin production, resulting in higher bacteriocin activity in the cell-free culture supernatant. Finally, lactic acid production was stimulated by the addition of pepper, and this was not due to the manganese present because an amount of manganese that was not growth limiting was added to the growth medium. Addition of spices to the sausage mixture is clearly a factor that will influence the effectiveness of bacteriocinogenic starter cultures in fermented-sausage manufacturing.     

The Curing Agent Sodium Nitrite, Used in the Production of Fermented Sausages, Is Less Inhibiting to the Bacteriocin-Producing Meat Starter Culture Lactobacillus curvatus LTH 1174 under Anaerobic Conditions

Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive to nitrite; even a concentration of 10 ppm of curing agent inhibited its growth and both volumetric and specific bacteriocin production. A meat simulation medium containing 5 ppm of sodium nitrite was tested to investigate the influence of the gas phase on the growth and bacteriocin production of L. curvatus LTH 1174. Aerating the culture during growth had no effect on biomass formation, but the oxidative stress caused a higher level of specific bacteriocin production and led to a metabolic shift toward acetic acid production. Anaerobic conditions, on the other hand, led to an increased biomass concentration and less growth inhibition. Also, higher maximum volumetric bacteriocin activities and a higher level of specific bacteriocin production were obtained in the presence of sodium nitrite than in fermentations under aerobic conditions or standard conditions of air supply. These results indicate that the inhibitory effect of the curing agent is at least partially masked under anaerobic conditions.     

Influence of nutrients on growth and bacteriocin production by Leuconostoc mesenteroides L124 and Lactobacillus curvatus L442

The aim of this study was to investigate the effect of complex nutrients on microbial growth and bacteriocin production, in order to improve bacteriocin synthesis during the growth cycle of Leuconostoc mesenteroides L124 and Lactobacillus curvatus L442. The fermentations were conducted at the optimum pH and temperature for bacteriocin production (pH 5.5+/-0.1 and temperature 25+/-0.1 degrees C). Because of their association with the final biomass, conditions favouring the increase of the produced biomass resulted in the increase of bacteriocin activity in the growth medium. Since the produced final biomass and the final concentration of the bacteriocins were associated with the amount of the carbon (glucose) and nitrogen source, better growth of the lactic acid bacterial strains favoured the increase of the specific bacteriocin production. Additionally, the bacteriocin production was influenced by carbon/nitrogen ratio.     

Sequencing and expression analysis of sakacin genes in Lactobacillus curvatus strains

In this study, we focused our investigation on two strains of Lactobacillus curvatus, L442 and LTH1174, which are able to produce bacteriocins. L. curvatus LTH1174 is widely studied for its capability to produce curvacin A, while L. curvatus L442 was isolated from traditional Greek fermented sausages and was shown to possess a strong inhibitory activity toward Listeria monocytogenes. By polymerase chain reaction, we were able to target in both strains the genes for the production of sakacin P and sakacin Q, sppA and sppQ, respectively, both encoded chromosomally. While sppA was found to be conserved when compared with other sakacin P genes, sppQ showed a deletion of about 15 nucleotides when aligned with sequences obtained from Lactobacillus sakei. This difference did not affect the activity of sakacin Q as determined by testing sensitive strains. Expression analysis highlighted that sakacin P was expressed in L. curvatus L442 but not in L. curvatus LTH1174. Curing experiments were performed on L. curvatus LTH1174 to study the effect of the megaplasmid, present in this strain. In the plasmid-cured strain, expression of the sppA gene was detected. sppQ was expressed in both plasmid-cured and wild-type L. curvatus LTH1174, although expression was higher in the plasmid-cured strain.     

Optimization of culture conditions and medium composition for the production of micrococcin GO5 by Micrococcus sp. GO5

To enhance the production of micrococcin GO5, a bacteriocin produced by Micrococcus sp. GO5, cultivation conditions and medium composition were optimized. The optimal initial pH and temperature for bacteriocin production were 7.0-9.0 and 37 degrees C, respectively. Micrococcus sp. GO5 displayed the highest micrococcin GO5 activity when grown in modified MRS medium that contained lactose or sucrose, rather than glucose, as a carbon source. The maximum bacteriocin activity was obtained in modified MRS medium containing 0.5% tryptone and 1.0% yeast extract as nitrogen sources instead of the other nitrogen sources present in MRS medium. Bacteriocin production was greatly affected by the concentration of K(2)HPO(4); strain GO5 produced eight-fold more bacteriocin in medium containing 2.0-2.5% K(2)HPO(4) than in medium containing 0.2% K(2)HPO(4). The optimal concentration of MgSO(4).7H(2)O for bacteriocin production was 0.5%. The production of micrococcin GO5 was increased 32-fold in shake flask culture and 16-fold in a bioreactor using the optimized medium (TY medium), compared with culturing in MRS medium.     

Carnocin KZ213 produced by<Emphasis Type="Italic"> Carnobacterium piscicola</Emphasis> 213 is adsorbed onto cells during growth. Its biosynthesis is regulated by temperature,pH and medium composition

Carnocin KZ213 is an antilisterial bacteriocin produced by Carnobacterium piscicola 213. The effects of pH and temperature were studied during batch fermentation in MRS* medium (modified MRS without ammonium citrate or sodium acetate). The optimal pH for growth is between 6 and 7. The maximum bacteriocin productivity in the supernatant occurs at pH 7. Operating at controlled pH increases the volumetric activity of the free bacteriocin by 8- to 16-fold, compared with uncontrolled pH. No bacteriocin production is observed below pH 6.5. Temperature has a dramatic effect on carnocin KZ213 production. Growth is optimal at 25 °C and 30 °C, although no bacteriocin production is detected at 30 °C. Also, bacteriocin production is observed at 25 °C in MRS*, but not in complex APT broth, where growth is optimal. The presence of glucose as a carbon and/or energy source is important for carnocin KZ213 synthesis. Hence, bacteriocin synthesis is regulated by temperature, carbon source and medium composition. Quantification studies of bacteriocin adsorbed onto producer cells show that the majority of the carnocin KZ213 secreted is adsorbed onto the producer cells during growth. Only 15% of the total bacteriocin produced is detected in the cell-free supernatant at the end of growth.     

Industrial Whey Utilization as a Medium Supplement for Biphasic Growth and Bacteriocin Production by Probiotic Lactobacillus casei LA-1

The ability of probiotic Lactobacillus casei LA-1 for bacteriocin production using industrial by-products, such as whey, as supplement in growth medium has been demonstrated for the first time. Whey was investigated as a sole carbon source in cooperation with other components to substitute expensive nutrients as MRS for economical bacteriocin production. Industrial whey-supplemented MRS medium was then selected as to determine the effect of four variables (temperature, initial pH, incubation time, and whey concentration) by response surface methodology on bacteriocin production. Statistical analysis of results showed that two variables have a significant effect on bacteriocin production. Response surface data showed maximum bacteriocin production of 6,132.33?AU/mL at an initial pH of 7.12, temperature 34.29?°C, and whey concentration 13.74?g/L. The production of bacteriocin started during the exponential growth phase, reaching maximum values at stationary phase, and a biphasic growth and production pattern was observed. Our current work demonstrates that this approach of utilization of whey as substitution in costly medium as MRS has great promise for cost reduction in industry for the production of novel biological metabolic product that can be utilized as a food preservative.     

Purification and amino acid sequence of a bacteriocin produced by Pediococcus acidilactici.

A bacteriocin produced by Pediococcus acidilactici has been purified to homogeneity by a rapid and simple four-step purification procedure which includes ammonium sulphate precipitation, chromatography with a cation-exchanger and Octyl Sepharose, and reverse-phase chromatography. The purification resulted in an approximately 80,000-fold increase in the specific activity and about a 6-fold increase in the total activity. The amino acid composition and sequencing data indicated that the bacteriocin contained 43-44 amino acid residues. The predicted M(r) and isolectric point of the bacteriocin are about 4600 and 8.6, respectively. Comparing the amino acid sequence of this bacteriocin with the sequences of leucocin A-UAL 187, sakacin P and curvacin A (bacteriocins produced by Leuconostoc gelidum, Lactobacillus sake and Lactobacillus curvatus, respectively) revealed that all four bacteriocins had in their N-terminal region the sequence Tyr-Gly-Asn-Gly-Val-Xaa-Cys, indicating that this concensus sequence is of fundamental importance for this group of bacteriocins. The bacteriocin from P. acidilactici and sakacin P were very similar, having at least 25 common amino acid residues. The sequence similarity was greatest in the N-terminal half of the molecules--17 of the first 19 residues were common--indicating the fundamental importance of this region. Leucocin A-UAL 187 and curvacin A had, respectively, at least 16 and 13 amino acid residues in common with the bacteriocin from P. acidilactici.     

Influence of pH,temperature and culture media on the growth and bacteriocin production by vaginal Lactobacillus salivarius CRL 1328

AIMS: To study the influence of pH, temperature and culture medium on the growth and bacteriocin production by vaginal Lactobacillus salivarius subsp. salivarius CRL 1328. METHODS AND RESULTS: The study was performed using a complete factorial experimental design. Lactobacillus salivarius was cultivated in LAPTg and MRS broths, adjusted to specific initial pH, and at different temperatures of incubation. The growth, which was evaluated by the Gompertz model, was higher in MRS broth than in LAPTg broth. The initial pH of the culture medium and the temperature had a dramatic effect on the production of bacteriocin. The optimal conditions for bacteriocin production were different to those for optimal growth. The decrease in the pH of the culture medium was parallel to the growth; pH had similar final values in both the MRS and the LAPTg broths. CONCLUSIONS: The optimal growth conditions were recorded in MRS broth, with an initial pH of 6.5 and a temperature of 37 degrees C. The maximum bacteriocin activity was obtained in LAPTg after 6 h at 37 degrees C, and at an initial pH of 6.5 or 8.0. SIGNIFICANCE AND IMPACT OF THE STUDY: The application of a complete factorial design, and the evaluation of the growth parameters through the Gompertz model, enabled a rapid and simultaneous exploration of the influence of pH, temperature and growth medium on both growth and bacteriocin production by vaginal Lact. salivarius CRL 1328.     

Optimization of bacteriocin production by Lactobacillus plantarum ST13BR, a strain isolated from barley beer

The cell-free supernatant containing bacteriocin ST13BR, produced by Lactobacillus plantarum ST13BR, inhibits the growth of L. casei, Pseudomonas aeruginosa, Enterococcus faecalis, Klebsiella pneumoniae and Escherichia coli. Based on tricine-SDS-PAGE, bacteriocin ST13BR is 10 kDa in size. Complete inactivation or significant reduction in bacteriocin activity was observed after treatment with Proteinase K, trypsin and pronase, but not with catalase or alpha-amylase. Low bacteriocin activity (200 AU/ml) was recorded in BHI medium, M17 broth, 10% (w/v) soy milk, and 2% and 10% (w/v) molasses, despite good growth. Maximal bacteriocin activity (6,400 AU/ml) was recorded after 23 h in MRS broth, but only at 30 degrees C. Tween 80 in MRS broth increased bacteriocin production by more than 50%. Meat extract or yeast extract as sole nitrogen source, or a combination of the two (1 : 1) in MRS broth, stimulated bacteriocin production (6,400 AU/ml). Only 50% activity (3,200 AU/ml) was recorded with tryptone as sole nitrogen source, whereas a combination of tryptone, meat extract and yeast extract yielded 6,400 AU/ml. Bacteriocin production was not stimulated by the addition of glucose at 2.0% w/v (3,200 AU/ml), nor 2% (w/v) fructose, sucrose, lactose or mannose, respectively (800 AU/ml). Activity levels less than 200 AU/ml were recorded in the presence of 0.05% to 0.5% (w/v) maltose. Maximal bacteriocin production (6,400 AU/ml) was recorded in the presence of 2% (w/v) maltose. Maltose at 4.0% (w/v) led to a 50% reduction of bacteriocin activity. The presence of 1.0% (w/v) and higher KH(2)PO(4), or glycerol at 0.2% (w/v) suppressed bacteriocin production.     

Effect of medium components on bacteriocin production by Lactobacillus plantarum strains ST23LD and ST341LD, isolated from spoiled olive brine

Bacteriocin ST23LD levels of 2930AU/OD were recorded in MRS broth (pH of 6.5) and in the presence of tryptone and yeast extract as sole nitrogen sources. Growth in MRS broth at an initial pH of 6.0 yielded only 1460AU/OD bacteriocin ST23LD. Activities of 5861AU/OD were recorded with maltose (20, 30 and 40 g/l) as sole carbon source and 9036AU/OD with the addition of 2.0-10.0 g/l KH2PO4. Bacteriocin ST341LD levels of 2850 and 2841AU/OD were recorded in MRS broth at an initial pH of 6.0 or 5.5, respectively. Only 709AU/OD was recorded in the same medium with an initial pH of 6.5. Bacteriocin ST341LD production was stimulated by the presence of tryptone. However, glucose at 10 and 40 g/l, or the presence of 5.0 or 10.0 g/l K2HPO4, resulted in a 50% reduction of bacteriocin activity. Glycerol in the growth medium repressed bacteriocin production. No increased bacteriocin production was recorded in medium supplemented with vitamins.     

Factors affecting production of an antilisterial bacteriocin by Carnobacterium piscicola strain A9b in laboratory media and model fish systems

AIMS: To investigate factors influencing bacteriocin production and bacteriocin stability of the bioprotective culture Carnobacterium piscicola strain A9b. METHODS AND RESULTS: Maximum activity was obtained in MRS7 broth (MRS adjusted to pH 7.2), with or without glucose. No bacteriocin was produced in APT broth when a low inoculum level (0.001%) was used. In contrast, inoculum level did not influence bacteriocin production in BHI and MRS7 without glucose. Bacteriocin production in APT was induced by the presence of an extracellular compound present in the sterile, filtered, cell-free supernatant fluid of a stationary-phase culture. Increasing concentrations of NaCl (2-7%) reduced bacteriocin production and maximum cell density of C. piscicola A9b when grown in cooked fish juice at 4 degrees C. CONCLUSION: Media composition, inoculum level and sodium chloride concentration affected production. SIGNIFICANCE AND IMPACT OF THE STUDY: The influence of NaCl on bacteriocin production may negate the inhibitory effect of C. piscicola A9b against Listeria monocytogenes in salty foods.     

Influence of growth conditions on the production of a nisin-like bacteriocin by Lactococcus lactis subsp. lactis A164 isolated from kimchi

The influence of growth parameters on the fermentative production of a nisin-like bacteriocin by Lactococcus lactis subsp. lactis A164 isolated from kimchi was studied. The bacteriocin production was greatly affected by carbon and nitrogen sources. Strain A164 produced at least 4-fold greater bacteriocin in M17 broth supplemented with lactose than other carbon sources. The amount of 3% yeast extract was found to be the optimal organic nitrogen source. While the maximum biomass was obtained at 37 degrees C, the optimal temperature for the bacteriocin production was 30 degrees C. The bacteriocin production was also affected by pH of the culture broth. The optimal pH for growth and bacteriocin production was 6.0. Although the cell growth at pH 6.0 was nearly the same level at pH 5.5 and 6.5, the greater bacteriocin activity was observed at pH 6.0. Exponential growth took place only during an initial period of the cultivation, and then linear growth was observed. Linear growth rates increased from 0.160 g(DCW) x l(-1) x h(-1) to 0.245 g(DCW) x l(-1) x h(-1) with increases in lactose concentrations from 0.5 to 3.0%. Maximum biomass was also increased from 1.88 g(DCW) x l(-1) to 4.29 g(DCW) x l(-1). However, increase in lactose concentration did not prolong the active growth phase. After 20 h cultivation, cell growth stopped regardless of lactose concentration. Production of the bacteriocin showed primary metabolic kinetics. However, bacteriocin yield based on cell mass increased greatly during the late growth phase. A maximum activity of 131x10(3) AU x ml(-1) was obtained at early stationary growth phase (20 h) during the batch fermentation in M17L broth (3.0% lactose) at 30 degrees C and pH 6.0.