Morphology and gelation of thermosensitive chitosan hydrogels

The morphology of physical hydrogels is often difficult to examine due to the delicate nature of the system and therefore has not been studied in detail. Chitosan/GP (glycerophosphate salt) is a significant hydrogel in the biomedical and cosmetic fields as it is thermosensitive and contains less than 5% polysaccharide. The morphology of this system was examined with laser scanning confocal microscopy (LSCM) to image the gel morphology. The images indicate that the gel is quite heterogeneous, and power spectra reveal a fractal-like morphology. A study of composition found that increasing chitosan concentration increased the amount of polymer-rich phase present in the gel, and that the smallest aggregates decreased in size.     

Effect of chemistry and morphology on the biofunctionality of self-assembling diblock copolypeptide hydrogels

Amphiphilic, diblock copolypeptides of hydrophilic lysine or glutamic acid and hydrophobic leucine or valine have been observed to self-assemble into rigid hydrogels in aqueous solution at neutral pH and very low volume fraction of polymer, > or =0.5 wt % polypeptide. Laser scanning confocal microscopy and ultra small angle neutron scattering revealed a heterogeneous microstructure with distinct domains of hydrogel matrix and pure water pores. In situ nanoscale characterization, using cryogenic transmission electron microscopy, revealed a porous, interconnected membranous network of assembled polypeptides. At concentrations of polypeptide below gelation, diblocks containing lysine were cytotoxic to cells, whereas those containing glutamic acid were noncytotoxic. At higher polypeptide concentrations, within rigid gel scaffolds, both lysine and glutamic acid based diblocks were noncytotoxic but did not support cell attachment/proliferation. The cationic chemistry observed as cytotoxic in the fluid state was essentially inert in the intact, rigid hydrogel state.     

Association between GM3 and CD4-Ick complex in human peripheral blood lymphocytes

The aim of this study was to further elucidate our previous observation on molecular interaction of GM3, CD4 and p56Ick in microdomains of human peripheral blood lymphocytes (PBL). We analyzed GM3 distribution by immunoelectron microscopy and the association between GM3 and CD4-p56Ick complex by scanning confocal microscopy and co-immunoprecipitation experiments. Scanning confocal microscopy analysis showed an uneven signal distribution of GM3 molecules over the surface of human lymphocytes. Nearly complete colocalization areas indicated that CD4 molecules were distributed in GM3-enriched plasma membrane domains. Co-immunoprecipitation experiments revealed that CD4 and p56Ick were immunoprecipitated by IgG anti-GM3, demonstrating that GM3 tightly binds to the CD4-p56Ick complex in human PBL. In order to verify whether GM3 association with CD4 molecules may depend on the presence of p56Ick, we analyzed this association in U937, a CD4 + and p56Ick negative cell line. The immunoprecipitation with anti-GM3 revealed the presence of a 58kDa band immunostained with anti-CD4 Ab, suggesting that the GM3-CD4 interaction does not require its association with p56Ick. These findings support the view that GM3 enriched-domains may represent a functional multimolecular complex involved in signal transduction and cell activation.     

Morphology and gelation of thermosensitive xyloglucan hydrogels

Galactose modified xyloglucan is a thermally reversible hydrogel that is increasingly used in the biomedical field due to the ease of altering the gelation time and temperature by modifying the galactose removal ratio. However there is little information concerning the morphology and rheological properties of the hydrogel under physiological conditions. Differential scanning microcalorimetry (DSmicroC) showed the thermal gelation process to occur over a broad temperature range (5-50 degrees C). The rheological properties of the hydrogels were investigated as a function of concentration, temperature and ionic strength. The final elastic moduli of the hydrogels increased with increases in concentration. Isothermal rheology suggests that the gelation occurred in two distinct stages, which was influenced by the solution media. Scanning electron microscopy (SEM) was used to characterize the morphology of the xyloglucan which were thermally gelled at 37 degrees C. The resultant morphology was strongly dependent on the concentration of the hydrogel. Strong hydrogels were only obtained at 3 wt.% at 37 degrees C, and the morphology characterized by an open 3-dimensional network, comprised of thin membranes. It is proposed that the first stage of the isothermal gelation is the formation and growth of the thin membranes, followed by the formation of a three dimensional network.     

Rheological characterisation of a novel thermosensitive chitosan/poly(vinyl alcohol) blend hydrogel

Thermosensitive hydrogels that are triggered by changes in environmental temperature thus resulting in in situ hydrogel formation have recently attracted the attention of many investigators for biomedical applications. In the current work, the thermosensitive hydrogel was prepared through the mixture of chitosan (CS), poly(vinyl alcohol) (PVA) and sodium bicarbonate. The mixture was liquid aqueous solutions at low temperature (about 4 °C), but a gel under physiological conditions. The hydrogel was characterized by FTIR, swelling and rheological analysis. The effect of hydrogel composition and temperature on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. In addition, the hydrogel interior morphology as well as porosity of structure was evaluated by scanning electron microscopy (SEM). The potential of the hydrogels as vehicles for delivering bovine serum albumin (BSA) were also examined. In this study, the physically crosslinked chitosan/PVA gel was prepared under mild conditions without organic solvent, high temperature or harsh pH. The viscoelastic properties, as investigated rheologically, indicate that the gel had good mechanical strength. The gel formed implants in situ in response to temperature change, from low temperature (about 4 °C) to body temperature, which was very suitable for local and sustained delivery of proteins, cell encapsulation and tissue engineering.     

Thermoreversible protein hydrogel as cell scaffold

A thermoreversible fibrillar hydrogel has been formed from an aqueous lysozyme solution in the presence of dithiothreitol (DTT). Its physical properties and potential as a tissue engineering scaffold have been explored. Hydrogels were prepared by dissolving 3 mM protein in a 20 mM DTT/water mixture, heating to 85 degrees C and cooling at room temperature. No gel was observed for the equivalent sample without DTT. The elastic nature of the gel formed was confirmed by rheology, and the storage modulus of our gel was found to be of the same order of magnitude as for other cross-linked biopolymers. Micro differential scanning calorimetry (microDSC) experiments confirmed that the hydrogel was thermally reversible and that gelation and melting occurs through a solid-liquid-like first-order transition. Infrared spectroscopy of the hydrogel and transmission electron microscopy studies of very dilute samples revealed the presence of beta-sheet-rich fibrils that were approximately 4-6 nm in diameter and 1 mum in length. These fibrils are thought to self-assemble along their long axes to form larger fibers that become physically entangled to form the three-dimensional network observed in both cryo-scanning electron microscopy (cryo-SEM) and small-angle neutron scattering (SANS) studies. The hydrogel was subsequently cultured with 3T3 fibroblasts and cells spread extensively after 7 days and stretched actin filaments formed that were roughly parallel to each other, indicating the development of organized actin filaments in the form of stress fibers in cells.     

Association between GM3 and CD4-Ick complex in human peripheral blood lymphocytes

The aim of this study was to further elucidate our previous observation on molecular interaction of GM3, CD4 and p56^lck in microdomains of human peripheral blood lymphocytes (PBL). We analyzed GM3 distribution by immunoelectron microscopy and the association between GM3 and CD4-p56^lck complex by scanning confocal microscopy and co-immunoprecipitation experiments. Scanning confocal microscopy analysis showed an uneven signal distribution of GM3 molecules over the surface of human lymphocytes. Nearly complete colocalization areas indicated that CD4 molecules were distributed in GM3-enriched plasma membrane domains. Co-immunoprecipitation experiments revealed that CD4 and p56^lck were immunoprecipitated by IgG anti-GM3, demonstrating that GM3 tightly binds to the CD4-p56^lck complex in human PBL. In order to verify whether GM3 association with CD4 molecules may depend on the presence of p56^lck, we analyzed this association in U937, a CD4+and p56^lck negative cell line. The immunoprecipitation with anti-GM3 revealed the presence of a 58[emsp4 ]kDa band immunostained with anti-CD4 Ab, suggesting that the GM3-CD4 interaction does not require its association with p56^lck. These findings support the view that GM3 enriched-domains may represent a functional multimolecular complex involved in signal transduction and cell activation.     

The effects of toxicological agents on the optics and mitochondria of the lens and the mitochondria of the corneal epithelium

This review describes how the morphology and distribution of the mitochondria of the epithelium and the superficial fibre layers of the lens were studied using confocal scanning laser microscopy. This research was correlated with an effort to use the optical properties of the intact lens in culture as a proxy for the cornea in measuring ocular toxicity. In turn, this work led to the confocal study of the in vitro and then the in vivo cornea and their possible use in using confocal microscopy to evaluate the effect of various treatments on the integrity of the surface of the eye. Finally, confocal examination of the mitochondria of the lens has provided an avenue to the study of mitochondrial dynamics.     

Biodegradable and pH-sensitive hydrogels for cell encapsulation and controlled drug release

Hydrogels with pH-sensitive poly(acrylic acid) (PAAc) chains and biodegradable acryloyl-poly(-caprolactone)-2-hydroxylethyl methacrylate (AC-PCL-HEMA) chains were designed and synthesized. The morphology of hydrogel was observed by scanning electron microscopy. The degradation of the hydrogel in the presence of Pseudomonas lipase was studied. The in vitro release of bovine serum albumin from the hydrogel was investigated. Cytotoxicity study shows that the AC-PCL-HEMA/AAc copolymer exhibits good biocompatibility. Cell adhesion and migration into the hydrogel networks were evaluated by using different cell lines. The hydrogel with a lower cross-linking density and a larger pore size exhibited a better performance for cells migration.     

Novel PVA-based hydrogel microparticles for doxorubicin delivery

Micro- and nanoparticles are considered suitable drug delivery systems for their unique features, such as a large surface to volume ratio, and for the possibility to tune their size and hydrophobicity. A polymer/polymer/water emulsion method was used for producing a chemically cross-linked hydrogel made of poly(vinyl alcohol) and of poly(methacrylate) moieties. Mesoscopic investigation of the microparticles was accomplished by laser scanning confocal microscopy. Dynamics of confined water within the gel meshes was studied by quasi-elastic incoherent neutron scattering. Succinoylation of these particles allowed an efficient loading with a maximum doxorubicin payload of about 50% (w/w) of dry microparticles. To evaluate the potentials of such a microdevice for drug delivery, LoVo colon cancer cells have been exposed to doxorubicin loaded microparticles to study the in vitro efficiency of the payload release and the consequent cytotoxic effect.     

Prion protein is a component of the multimolecular signaling complex involved in T cell activation

In this study we analyzed the interaction of prion protein PrP^C with components of glycosphingolipid-enriched microdomains in lymphoblastoid T cells. PrP^C was distributed in small clusters on the plasma membrane, as revealed by immunoelectron microscopy. PrP^C is present in microdomains, since it coimmunoprecipitates with GM3 and the raft marker GM1. A strict association between PrP^C and Fyn was revealed by scanning confocal microscopy and coimmunoprecipitation experiments. The phosphorylation protein ZAP-70 was immunoprecipitated by anti-PrP after T cell activation. These results demonstrate that PrP^C interacts with ZAP-70, suggesting that PrP^C is a component of the multimolecular signaling complex within microdomains involved in T cell activation.     

Colocalization and Complex Formation Between Prosaposin and Monosialoganglioside GM3 in Neural Cells

Abstract: Prosaposin, the precursor of saposins A, B, C, and D, was recently identified as a neurotrophic factor in vitro as well as in vivo. Its neurotrophic activity has been localized to a linear 12-amino acid sequence located in the NH₂-terminal portion of the saposin C domain. In this study, we show the colocalization of prosaposin and ganglioside GM3 on NS20Y cell plasma membrane by scanning confocal microscopy. Also, TLC and western blot analyses showed that GM3 was specifically associated with prosaposin in immunoprecipitates; this binding was Ca²⁺-independent and not disassociated during sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The association of prosaposin-GM3 complexes on the cell surface appeared to be functionally important, as determined by differentiation assays. Neurite sprouting, induced by GM3, was inhibited by antibodies raised against a 22-mer peptide, prosaptide 769, containing the neurotrophic sequence of prosaposin. In addition, pertussis toxin inhibited prosaptide-induced neurite outgrowth, as well as prosaptide-enhanced ganglioside concentrations in NS20Y cells, suggesting that prosaposin acted via a G protein-mediated pathway, affecting both ganglioside content and neuronal differentiation. Our findings revealed a direct and right GM3-prosaposin association on NS20Y plasma membranes. We suggest that ganglioside-protein complexes are structural components of the prosaposin receptor involved in cell differentiation.     

Functionalized Nanolipobubbles Embedded Within a Nanocomposite Hydrogel: a Molecular Bio-imaging and Biomechanical Analysis of the System

The purpose of this study was to explore the use of molecular bio-imaging systems and biomechanical dynamics to elucidate the fate of a nanocomposite hydrogel system prepared by merging FITC-labeled nanolipobubbles within a cross-linked hydrogel network. The nanocomposite hydrogel system was characterized by size distribution analysis and zeta potential as well as shears thinning behavior, elastic modulus (G’), viscous loss moduli (G”), TEM, and FTIR. In addition, molecular bio-imaging via Vevo ultrasound and Cell-viZio techniques evaluated the stability and distribution of the nanolipobubbles within the cross-linked hydrogel. FITC-labeled and functionalized nanolipobubbles had particle sizes between 135 and 158 nm (PdI?=?0.129 and 0.190) and a zeta potential of ?34 mV. TEM and ultrasound imaging revealed the uniformity and dimensional stability of the functionalized nanolipobubbles pre- and post-embedment into the cross-linked hydrogel. Biomechanical characterization of the hydrogel by shear thinning behavior was governed by the polymer concentration and the cross-linker, glutaraldehyde. Ultrasound analysis and Cell-viZio bio-imaging were highly suitable to visualize the fluorescent image-guided nanolipobubbles and their morphology post-embedment into the hydrogel to form the NanoComposite system. Since the nanocomposite is intended for targeted treatment of neurodegenerative disorders, the distribution of the functionalized nanolipobubbles into PC12 neuronal cells was also ascertained via confocal microscopy. Results demonstrated effective release and localization of the nanolipobubbles within PC12 neuronal cells. The molecular structure of the synthetic surface peptide remained intact for an extended period to ensure potency for targeted delivery from the hydrogel ex vivo. These findings provide further insight into the properties of nanocomposite hydrogels for specialized drug delivery.     

Surface-directed structure formation of β-lactoglobulin inside droplets

The morphology of β-lactoglobulin structures inside droplets was studied during aggregation and gelation using confocal laser scanning microscopy (CLSM) equipped with a temperature stage and transmission electron microscopy (TEM). The results showed that there is a strong driving force for the protein to move to the interface between oil and water in the droplet, and the β-lactoglobulin formed a dense shell around the droplet built up from the inside of the droplets. Less protein was found inside the droplets. The longer the β-lactoglobulin was allowed to aggregate prior to gel formation, the larger the part of the protein went to the interface, resulting in a thicker shell and very little material being left inside the droplets. The droplets were easily deformed because no network stabilizes them. When 0.5% emulsifier, polyglycerol polyresinoleat (PGPR), was added to the oil phase, the β-lactoglobulin was situated both inside the droplets and at the interface between the droplets and the oil phase; when 2% PGPR was added, the β-lactoglobulin structure was concentrated to the inside of the droplets. The possibility to use the different morphological structures of β-lactoglobulin in droplets to control the diffusion rate through a β-lactoglobulin network was evaluated by fluorescence recovery after photobleaching (FRAP). The results show differences in the diffusion rate due to heterogeneities in the structure: the diffusion of a large water-soluble molecule, FITC-dextran, in a dense particulate gel was 1/4 of the diffusion rate in a more open particulate β-lactoglobulin gel in which the diffusion rate was similar to that in pure water.     

Inhibition of influenza-virus-induced cytopathy by sialylglycoconjugates

The anti-viral activity of gangliosides such as SPG (sialylparagloboside), GD1a, GM3, and GM4 was assessed by inhibition of the cytopathy of MDCK cells due to infection with the influenza virus A/PR/8/34. The inhibitory effect was in the following sequence: SPG>GD1a>GM3>GM4. The IC50 of SPG and GD1a was 7 and 70 microM, respectively, indicating that they are more effective than the representative inhibitor amantadine. Although 3'-sialyllactose (3'-SL) and 3'-sialyllactosamine (3'-SLN), which are identical to the terminal trisaccharides of GM3 and SPG, respectively, did not show any inhibitory effect, introduction of an amino group to the reducing end of 3'-SL following amidation with lauroyl chloride gave the inhibitory potency, which was comparable to that of GM3. These results suggest that the viral hemagglutinin recognizes exogenous sialyloligosaccharides rather than inherent sialyloligosaccharides expressed on MDCK cells, since introduction of the hydrophobic moiety to oligosaccharides might cause micelle formation.     

Application of the immunofluorescence technique and confocal laser scanning microscopy for studying the distribution of the luteinizing hormone/chorionic gonadotropin (LH/CG) receptor on rat luteal cells

We used confocal scanning microscopy to study the semi-quantitative distribution of luteinizing hormone/chorionic gonadotropin (LH/CG) receptors on rat luteal cells at both the two- and the three-dimensional level. The receptors were visualized in 6-microns sections of pseudopregnant rat ovaries using polyclonal rabbit antiserum to hCG-affinity-purified LH/CG receptor in conjunction with rhodamine-conjugated anti-rabbit immunoglobulins. Twenty to 30 optical sections were taken at different focal planes from representative luteal cells with a confocal laser scanning microscope and then processed digitally to two- and three-dimensional pseudocolored images. Distinct differences in fluorescence intensity could be demonstrated at both the two- and the three-dimensional level on the luteal cell surfaces, suggesting an uneven distribution of the LH/CG receptors on the cell membranes. This probably results in the compartmentalization and polarization of luteal cell function.     

Visualization of silver-enhanced reaction products from protein- and immuno-colloidal gold probes by laser scanning confocal microscopy in leflection mode

We have employed a laser scanning confocal microscope in reflection mode to directly and indirectly visualize sites of deposition of silver-enhanced reaction products from colloidal gold probes. A direct approach was used for the localization of alpha-fetoprotein receptors in human myoblasts by incubating primary cultures with an alpha-fetoprotein-gold conjugate. For an indirect approach, cultured CEM cells, derived from a human T-lymphoma cell line, were incubated with a mouse monoclonal antibody to mature T-cells, followed by a gold-labelled antibody to mouse immunglobulins. Multiple optical sections of each sample were collected by reflection laser scanning confocal microscopy and combined into three-dimensional renderings. A (non-confocal) transmission image was generated of each field for comparative purposes. The increasing use of reflection laser scanning confocal microscopy combined with colloidal gold conjugates as biological markes will probably be of considerable advantage in cytochemical analysis.     

3D Confocal Laser Scanning Microscopy for Quantification of the Phase Behaviour in Agarose-MCC co-gels in Comparison to the Rheological Blending-law Analysis

The need for a rapid and direct alternative to the rheology-based blending laws in quantifying phase behaviour in biopolymer composite gels is explored in this study. In doing so, the efficacy of confocal laser scanning microscopy (CLSM) paired with image analysis software – FIJI and Imaris - in quantifying phase volume was studied. That was carried out in a model system of agarose with varying concentrations of microcrystalline cellulose (MCC) in comparison to the rheological blending laws. Structural studies performed using SEM, FTIR, differential scanning calorimetry and dynamic oscillation in-shear unveiled a continuous, weak agarose network supporting the hard, rod-shaped MCC inclusions where the composite gel strength increased with higher ‘filler’ concentration. The phase volumes of MCC, estimated with the microscopic protocol, matched the predictions obtained from computerized modelling using the Lewis-Nielsen blending laws. Results highlight the suitability of the microscopic protocol in estimating the water partition and effective phase volumes in the agarose-MCC composite gel.

     

Preparation of chromosome spreads for electron (TEM,SEM, STEM), light and confocal microscopy

In the past, ultrastructural studies on chromosome morphology have been carried out using light microscopy, scanning electron microscopy and transmission electron microscopy of whole mounted or sectioned samples. Until now, however, it has not been possible to use all of these techniques on the same specimen. In this paper we describe a specimen preparation method that allows one to study the same chromosomes by transmission, scanning-transmission and scanning electron microscopy, as well as by standard light microscopy and confocal microscopy. Chromosome plates are obtained on a carbon coated glass slide. The carbon film carrying the chromosomes is then transferred to electron microscopy grids, subjected to various treatments and observed. The results show a consistent morphological correspondence between the different methods. This method could be very useful and important because it makes possible a direct comparison between the various techniques used in chromosome studies such as banding, in situ hybridization, fluorescent probe localization, ultrastructural analysis, and colloidal gold cytochemical reactionsAbbreviations CLSM confocal laser scanning microscope - EM electron microscopy - kV kilovolt(s) - LM light microscope - SEM scanning electron microscope - STEM scanning-transmission electron microscope - TEM transmission electron microscope     

A physico-chemical and biological study of novel chitosan-chloroquinoline derivative for biomedical applications

This paper describes an elegant cross-linking technique for the preparation of chitosan-chloroquinoline derivative by using a greener technique. Chitosan solution in aqueous acetic acid was treated with 2-chloroquinoline-3-carbaldehyde solution to form hydrogel; the resulting hydrogel was subjected to solvent exchange. Combining the results of FTIR and XRD confirmed that 2-chloroquinoline-3-carbaldehyde have been reacted to chitosan. The morphology of the derivative was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The thermal stability of the derivative was examined by thermogravimetric analysis (TGA). The photoluminescence (PL) spectra of chitosan-chloroquinoline derivative show red-shifted emission maximum. The microbiological screening has demonstrated the antimicrobial activity of the derivative against bacteria viz. Staphylococcus aureus, Escherichia coli and Candida albicans. The obtained results showed that the chitosan-chloroquinoline derivative might be a promising candidate for novel antimicrobial agents for biomedical applications.