The use of water lettuce (Pistia stratiotes L.) for rhizofiltration of a highly polluted solution by cadmium and lead

The effectiveness of heavy metal uptake from contaminated nutrient solution by four aquatic macrophytes (Pistia stratiotes L., Salvinia auriculata AubL, Salvinia minima Baker, and Azolla filiculoides Lam) was estimated in this study. The influence of cadmium (3.5 mg L(-1) and 10.5 mg L(-1)) and lead (25 mg L(-1) and 125 mg L(-1)) on the stress symptoms was observed through the determination of chlorophyll content and transpiration rate over 14 days of the experiment. The results of the present study showed extreme reductions in Cd and Pb concentrations in solution during the first 4 days. The accumulation of Pb in plant tissues was the highest during the first 4 days and was more than 10 times higher in the roots (42,862 mg kg(-1)) than in the leaves (3867 mg kg(-1)). The accumulation of Cd slowly increased and was the highest at the end of the experiment. Concentrations in roots (3923 mg kg(-1)) were roughly 6 times higher than in the leaves (624 mg kg(-1)). Results showed significant decrease in the transpiration rate at Pb treatment and a significant increase at Cd treatment during 48 hours of exposition.     

Baseline water quality of municipal ponds and metal removal ability of Typha latifolia L. from sewage and industrial wastewaters

Municipal effluent of three rural settings of Islamabad was assessed for physicochemical and microbiological parameters by collecting wastewater from inlet and center of ponds. Results showed that water quality was comparatively better at the center as Typha latifolia plants were growing toward the center of ponds. In another study, the wastewater treatment ability of T. latifolia was investigated by growing them in industrial and municipal effluent under greenhouse conditions. Water and plant samples were collected periodically (3rd, 10th, 17th, 24th, and 31st day after transplanting) for the measurement of Pb, Cu, and Cd concentrations. A decrease in heavy metal concentration of both effluents was observed as the experiment progressed and metal removal percentages ranged between 81% and 96%. Complementary the increase in metal concentration in plant tissues was observed over experimental period. Among plant tissues, metal concentration of Pb was highest i.e. 362 mg kg^?1 in roots and 313 mg kg^?1 in shoots at end of experiment. Pb, Cu, and Cd concentrations were higher in roots than shoots and hence translocation factors were less than 1.0. Metal removal efficiency was better from industrial wastewater and was in order of Pb > Cu > Cd. T. latifolia can be used for remediation of heavy metal-polluted wastewater.     

Phytoremediation of Cd,Ni, Pb and Zn by Salvinia minima

Most metals disperse easily in environments and can be bioconcentrated in tissues of many organisms causing risks to the health and stability of aquatic ecosystems even at low concentrations. The use of plants to phytoremediation has been evaluated to mitigate the environmental contamination by metals since they have large capacity to adsorb or accumulate these elements. In this study we evaluate Salvinia minima growth and its ability to accumulate metals. The plants were cultivated for about 60 days in different concentrations of Cd, Ni, Pb and Zn (tested alone) in controlled environmental conditions and availability of nutrients. The results indicated that S. minima was able to grow in low concentrations of selected metals (0.03 mg L^?1 Cd, 0.40 mg L^?1 Ni, 1.00 mg L^?1 Pb and 1.00 mg L^?1 Zn) and still able to adsorb or accumulate metals in their tissues when cultivated in higher concentrations of selected metals without necessarily grow. The maximum values of removal metal rates (mg m² day^?1) for each metal (Cd = 0.0045, Ni = 0.0595, Pb = 0.1423 e Zn = 0.4046) are listed. We concluded that S. minima may be used as an additional tool for metals removal from effluent.     

Metal biosorption in lignocellulosic biofuel biorefinery effluent: an initial step towards sustainability of water resources

Biosorption of metals by microorganisms is a promising technology to remove accumulated non-process elements in highly recycled biorefinery process water. Removal of these elements would enable greater water reuse and reduce the environmental impact of effluent discharge. A model lignocellulosic ethanol biorefinery wastewater was created based on pulp mill effluent. This generated a wastewater with an environmentally realistic high loading of dissolved natural organic matter (900?mg/l), a potentially important factor influencing metal biosorption. Analysis of feedstock and pulp mill effluent indicated that Mn and Zn are likely to be problematic in highly recycled lignocellulosic ethanol biorefinery process water. Therefore, the growth of several bacteria and fungi from existing collections, and some isolated from pulp mill effluent were tested in the model wastewater spiked with Mn and Zn (0.2?mM). Wastewater isolates grew the best in the wastewater. Metal uptake varied by species and was much greater for Zn than Mn. A bacterium, Novosphingobium nitrogenifigens Y88(T), removed the most metal per unit biomass, 35 and 17?mg?Mn/g. No other organism tested decreased the Mn concentration. A yeast, Candida tropicalis, produced the most biomass and removed the most total metal (38?% of Zn), while uptake per unit biomass was 24?mg?Zn/g. These results indicate that microorganisms can remove significant amounts of metals in wastewater with high concentrations of dissolved natural organic matter. Metal sorption by autochthonous microorganisms in an anaerobic bioreactor may be able to extend water reuse and therefore lower the water consumption of future biorefineries.     

Phytoremediation of Water Using Phragmites karka and Veteveria nigritana in Constructed Wetland

Constructed wetland is an innovative and emerging ecological technology for wastewater treatment. This study was conducted to investigate the effectiveness of a Vegetated Submerged Bed Constructed Wetland (VSBCW) for removal of heavy metals from industrial wastewater in a steel manufacturing company. A pilot Effluent Treatment Plant (ETP) consisting of equalization basin, two VSBCW basins and a storage tank was constructed. The VSBCW was constructed using 10–30 mm round granite for the different zones. This was overlaid by 200 mm deep granite and 150 mm washed sand with Phragmites karka, Vetiveria nigritana and Cana lilies as macrophytes. Irrigation of macrophytes using effluent from the industry was done after 3 months of planting and ETP monitored. Industrial wastewater samples were collected and analyzed for heavy metals such as zinc (Zn), lead (Pb), iron (Fe), manganese (Mn), magnesium (Mg) and chromium (Cr) to know the treatment efficiency of the ETP. Results indicated that the removal efficiencies of the VSBCW for Pb, Mg and Cr were 15.4%, 79.7% and 97.9% respectively. Fe and Mn were seen to increase by 1.8% and 33% respectively. The ETP using locally available macrophytes is effective in the phytoremediation of heavy metals, particularly Cr from the wastewater.     

Surface adsorption, intracellular accumulation and compartmentalization of Pb(II) in batch-operated lagoons with Salvinia minima as affected by environmental conditions, EDTA and nutrients

The effects of environmental factors and nutrients on the various possible removal mechanisms (surface adsorption, intracellular accumulation and precipitation to sediments) and partitioning of lead among various compartments (plant biomass, water column and sediments) in Salvinia minima batch-operated lagoons, were evaluated. Surface adsorption was found to be the predominant mechanism for Pb(II) removal under all environmental conditions tested in the absence of nutrients (an average of 54.3%) and in a nutrient medium (modified Hutner 1/10 medium) free of EDTA and phosphates (54.41%) at "high" initial Pb(II) concentrations (in the range of 10.3+/-0.13 to 15.2+/-0.05 mg/L). Under these conditions, the bioconcentration factors (BCFs) were 2,431+/-276 and 2,065+/-35, respectively. Lead removal was very rapid during the first 4 h and reached 70% in the absence of nutrients at the "medium" light intensity and temperature (LIT) tested, 88% in nutrient medium free of EDTA and supplemented with synthetic wastewater (at the "lowest" LIT tested), and 85% in medium free of EDTA and phosphates. It was concluded that the mechanisms of lead removal by S. minima, and the compartmentalization of this metal in the microcosm of batch-operated lagoons, are primarily a function of the presence of certain nutrients and chelants, with secondary dependence on environmental conditions. In addition, the results indicate that the percentage of lead removed is only a gross parameter and that the complementary use of BCF and compartmentalization analysis is required to gain a full insight into the metal removal process.     

Salvinia auriculata in post-treatment of dairy industry wastewater

Abstract

The present study aimed to evaluate the aquatic macrophyte Savinia auriculata in post-treatment of wastewater from a dairy industry. The experiment was carried out in a greenhouse between February and March 2015. A batch system was used, each reactor was composed of polyethylene and had capacity of 250 liters of post-treated effluent. Every seven days, pH, turbidity, temperature, dissolved oxygen, chemical oxygen demand and series of solids (total, fixed and volatile) were determined in the wastewater. Besides that, the concentration of macro and micronutrients (P, N, K, Ca, Mg, Cu, Zn, Mn, and Fe) were determined in the wastewater and in plant tissue before and after the experiment. The results showed efficiency in the decrease of N, P, turbidity, pH, solids (ST, SF) and inefficiency in the reduction of volatile solids in the wastewater. The concentration of COD, Ca, Mn, Mg, and Fe increased at the end of the experiment. Due to the absorption of some nutrients such as N and P it is possible to conclude that Salvinia auriculata is a good option for the post-treatment of the wastewater from dairy industry. However, plant senescence promotes the elevation of some elements in the effluent because in this process, nutrients that were previously retained in the plant tissue are inserted into the wastewater again. Because of this it is necessary to remove plants of the reactor in the beginning of the process of senescence.     

Surface adsorption,intracellular accumulation and compartmentalization of Pb(II) in batch-operated lagoons with Salvinia minima as affected by environmental conditions,EDTA and nutrients

The effects of environmental factors and nutrients on the various possible removal mechanisms (surface adsorption, intracellular accumulation and precipitation to sediments) and partitioning of lead among various compartments (plant biomass, water column and sediments) in Salvinia minima batch-operated lagoons, were evaluated. Surface adsorption was found to be the predominant mechanism for Pb(II) removal under all environmental conditions tested in the absence of nutrients (an average of 54.3%) and in a nutrient medium (modified Hutner 1/10 medium) free of EDTA and phosphates (54.41%) at “high” initial Pb(II) concentrations (in the range of 10.3±0.13 to 15.2±0.05 mg/L). Under these conditions, the bioconcentration factors (BCFs) were 2,431±276 and 2,065±35, respectively. Lead removal was very rapid during the first 4 h and reached 70% in the absence of nutrients at the “medium” light intensity and temperature (LIT) tested, 88% in nutrient medium free of EDTA and supplemented with synthetic wastewater (at the “lowest” LIT tested), and 85% in medium free of EDTA and phosphates. It was concluded that the mechanisms of lead removal by S. minima, and the compartmentalization of this metal in the microcosm of batch-operated lagoons, are primarily a function of the presence of certain nutrients and chelants, with secondary dependence on environmental conditions. In addition, the results indicate that the percentage of lead removed is only a gross parameter and that the complementary use of BCF and compartmentalization analysis is required to gain a full insight into the metal removal process.

     

Investigations of Hg(II) and Pb(II) tolerance,removal and bioaccumulation and their effects on antioxidant enzymes on thermophilic Exiguobacterium profundum

Abstract

Hg(II) and Pb(II) tolerance, removal, bioaccumulation and effects on antioxidant enzymes of thermophilic Exiguobacterium profundum were investigated. The results indicated that Hg(II) was more toxic than Pb(II) to E. profundum. E. profundum was also more tolerant in solid medium than in liquid medium for Pb(II) and Hg(II). The bacterial growth was not significantly influenced at 1.0 and 2.5?mg/L Pb(II) and Hg(II) for 24?h. The highest Hg(II) and Pb(II) bioaccumulation amounts were determined as 37.56 and 54.35?mg metal/dried bacteria, respectively. Bioaccumulation capacities of the cell membrane of E. profundum for Hg(II) and Pb(II) were determined. The different concentrations of Pb(II) and Hg(II) enhanced the SOD and CAT enzymes. In addition, variations of the surface macrostructure and the functionality of E. profundum after the interaction with Hg(II) and Pb(II) were investigated by the scanning electron microscope (SEM) and the Fourier transform infrared spectroscopy (FT-IR), respectively.

This investigation obviously showed that thermophilic E. profundum can also be applied for removal and recovery of toxic metals from industrial wastewater. Clearly, a further investigation should be utilized by thermophilic microorganisms. According to antioxidant enyzme activities, E. profundum can be also used as a bioindicator for the detection of toxic metal pollution in natural water samples.     

Heavy metal adsorption properties of a submerged aquatic plant (Ceratophyllum demersum)

Heavy metals can be adsorbed by living or non-living biomass. Submerged aquatic plants can be used for the removal of heavy metals. In this paper, lead, zinc, and copper adsorption properties of Ceratophyllum demersum (Coontail or hornwort) were investigated and results were compared with other aquatic submerged plants. Data obtained from the initial adsorption studies indicated that C. demersum was capable of removing lead, zinc, and copper from solution. The metal biosorption was fast and equilibrium was attained within 20 min. Data obtained from further batch studies conformed well to the Langmuir Model. Maximum adsorption capacities (q(max)) onto C. demersum were 6.17 mg/g for Cu(II), 13.98 mg/g for Zn(II) and 44.8 mg/g for Pb(II). Kinetics of adsorption of zinc, lead and copper were analysed and rate constants were derived for each metal. It was found that the overall adsorption process was best described by pseudo second-order kinetics. The results showed that this submerged aquatic plant C. demersum can be successfully used for heavy metal removal under dilute metal concentration.     

Chromatography and Atomic Absorption Spectrometry for the Assessment of Heavy Metal Distribution among Amino Acids Used in Parenteral Nutrition Formulations—Studies with Cadmium and Lead

The distribution of Cd (II) and Pb (II) among amino acids in parenteral nutrition formulations was investigated by coupling ion-chromatography (HPLC/IC) and electrothermal atomic absorption spectrometry. The methodology was based on ion-exchange separation and fluorimetric amino acid detection after post-column derivatization. Cd (II) and Pb (II) were assayed in 500-µL fractions of the column effluent. The distribution of Cd (II) and Pb (II) in alanine (Ala), aspartic acid (Asp), glutamic acid (Glu), glycine (Gly), histidine (His), methionine (Met), phenylalanine (Phe), serine (Ser), and threonine (Thr) were analyzed by monitoring changes in the concentration of free amino acids by HPLC/IC. The results indicated that Cd (II) and Pb (II) were distributed according to the following trend: Gly–Cd?>?Gly–Pb?>?Ala–Cd?>?Ala–Pb?>?His–Cd?～?His–Pb?>?Thr–Cd?>?Thr–Pb?>?Phe–Cd?～?Phe–Pb?～?Asp–Cd?～?Asp–Pb?～?Met–Cd?～?Met–Pb?～?Glu–Cd?～?Glu–Pb?>?Ser–Cd?～?Ser–Pb. The effects of amino acid concentration and stability constants of amino acid–metal complexes are discussed.     

Disposal of metal treated Salvinia biomass in soil and its effect on growth and photosynthetic efficiency of wheat

Phytoremediation technologies generate huge quantities of biomass, the disposal of which is a serious concern. Wastewater samples collected from electroplating industries were treated with Salvinia biomass. The effect of application of metal loaded Salvinia plant biomass in soil on growth and physiological indices of 10-day-old seedlings of Triticum aestivum was evaluated. Controls (A) consisted of soil supplemented with untreated plant biomass. Seed germination, seedling height, total chlorophyll, glucose and protein levels, photosynthetic efficiency (Fv/Fm), photochemical quenching (qP), non-photochemical quenching (qn), quantum yield (Y), and electron transport rate (ETR) were not significantly affected in seedlings raised in soils supplemented with metal loaded biomass from most of the samples (B-F) in comparison to control. However, significant decline was noted in total chlorophyll, glucose, and quantum yield in plants grown in soil supplemented with biomass from sample E. Among elemental levels, C(%) remained largely unaffected, N(%) showed slight enhancement but a decrease in H(%) was noted in plants grown in soil supplemented with biomass from sample E. Our results, therefore, suggest that metal accumulated Salvinia biomass obtained after phytoremediation of heavy metal contaminated wastewater can be supplemented in soil. Further studies are required to assess long-term effects of disposal of metal loaded Salvinia plant biomass in soil.     

Removal of lead(II) by Saccharomyces cerevisiae AUMC 3875

The removal of lead(II) from artificial aqueous solution using live and dead biomass of Saccharomyces cerevisiae AUMC 3875 was investigated. The minimum inhibitory concentration (MIC) value of S. cerevisiae AUMC 3875 for lead(II) was 600 mg/l. For live and dead biomass, maximum lead(II) uptake capacities were achieved at pH?5.0, initial metal ion concentration 300 mg/l, and biomass dosage 3 g/l. Maximum biosorption capacities were reached after 3 h and 20 min for live and dead cells, respectively. Fourier Transform Infrared spectroscopy (FTIR) results revealed the important role of C?=?O,? OH,? NH, protein amide II band, $ \mathrm{PO}_2^{-} $ , mannans, sulphur and sulphur-oxygen compounds in lead(II) uptake. Scanning electron microscopy analysis (SEM) showed that the cell surface morphology and surface area/volume ratio changed greatly after lead(II) uptake. Transmission electron microscopy analysis (TEM) confirmed the involvement of both extracellular adsorption and intracellular penetration through the cell wall. X-ray powder diffraction (XRD) analysis revealed the presence of Pb(SO₄),Pb₂OSO₄ by dead biomass and Pb₃O₂(SO₄),Pb₂OSO₄ by live biomass. Energy dispersive X-ray microanalysis (EDAX) confirmed the occurrence of sulphur, oxygen and lead(II) on the cell wall. The removal of lead(II) from storage battery industry wastewater was performed by dead biomass efficiently.     

Desarrollo de un bioadsorbente laminar con Phanerochaete chrysosporium hipertolerante al cadmio,al níquel y al plomo para el tratamiento de aguas

BackgroundThe use of basidiomycetes for metal removal is an alternative to traditional methods. In this, the biomass acts as a natural ionic exchanger removing metals from solution.ObjectiveTo develop a laminar biosorbent using a basidiomycete fungus resistant to high Cd, Ni and Pb concentrations.MethodsThe tolerance of Trametes versicolor, Pleurotus ostreatus and Phanerochaete chrysosporium was evaluated using increasing concentrations of the heavy metal salts, cadmium sulphate, lead acetate and nickel chloride. A biosorbent system was developed based on polyethylene sheets with a fungal biomass. It was evaluated in bubble columns using synthetic wastewater with the 3 metal salts at a rate of 300 mg/l. Finally, in a complementary experiment using shake flasks, the effect of a higher amount of biomass related to the metal removal efficiency was evaluated.ResultsP. chrysosporium strain was more tolerant to C₄H₆O₄Pb (10,000 mg/l), Cl₂Ni (300 mg/l) and CdSO₄·8H₂O (1,500 mg/l). In a reactor, under non-ligninolytic conditions, the fungus removed 69% of the chemical oxygen demand and produced enzymes such as LiP (0.01 U/l) and MnP (0.6 U/l.). An accumulation of metals in the wall was observed. By increasing the biomass to 1.6 (w/v), the metal biosorption was favored in the mixture (57% Pb, 74% Cd, and 98% Ni) and separately (95% Pb, 60% Cd, and 56% Ni). Competition between Ni and Pb by ligands of the wall was observed.ConclusionA novel laminar system based on P. chrysosporium viable biomass was developed. It has a large surface area and tolerance to high concentrations of Cd, Ni and Pb. It seems to be an alternative for the removal of metals from water.     

Decontamination of coal mine effluent generated at the Rajrappa coal mine using phytoremediation technology

Toxicity of the effluent generated at the Rajrappa coal mine complex under the Central Coalfields Limited (CCL, a subsidiary of Coal India Limited) in Jharkhand, India was investigated. The concentrations (mg L^?1) of all the toxic metals (Fe, Mn, Ni, Zn, Cu, Pb, Cr, and Cd) in the coal mine effluent were above the safe limit suggested by the Environmental Protection Agency (EPA 2003). Among these, Fe showed the highest concentration (18.21 ± 3.865), while Cr had the lowest effluent concentration (0.15 ± 0.014). Efforts were also made to detoxify the effluent using two species of aquatic macrophytes namely “‘Salvinia molesta and Pistia stratiotes.” After 10 days of phytoremediation, S. molesta removed Pb (96.96%) > Ni (97.01%) > Cu (96.77%) > Zn (96.38%) > Mn (96.22%) > Fe (94.12%) > Cr (92.85%) > Cd (80.99%), and P. stratiotes removed Pb (96.21%) > Fe (94.34%) > Ni (92.53%) > Mn (85.24%) > Zn (79.51%) > Cr (78.57%) > Cu (74.19%) > Cd (72.72%). The impact of coal mine exposure on chlorophyll content showed a significant decrease of 42.49% and 24.54% from control values in S. molesta and P. stratiotes, respectively, perhaps due to the damage inflicted by the toxic metals, leading to the decay of plant tissues.     

Performance of a membrane bioreactor used for the treatment of wastewater contaminated with heavy metals

In this work the performance of a Membrane bioreactor (MBR) was assessed for the removal of 3-15 mg/l of copper, lead, nickel and zinc from wastewater. The average removal efficiencies accomplished by the MBR system were 80% for Cu(II), 98% for Pb(II), 50% for Ni(II) and 77% for Zn(II). The addition of 5 g/l vermiculite into the biological reactor enhanced metal removal to 88% for copper, 85% for zinc and 60% for nickel due to adsorption of metal ions on the mineral, while it reduced biomass inhibition and increased biomass growth. The metal ions remaining in soluble form penetrated into the permeate, while those attached to sludge flocs were effectively retained by the ultrafiltration membranes. The average heterotrophic biomass inhibition was 50%, while it reduced to 29% when lower metal concentrations were fed into the reactor in the presence of vermiculite. The respective autotrophic biomass inhibition was 70% and 36%. The presence of heavy metals and vermiculite in the mixed liquor adversely impacted on membrane fouling.     

Studies on SAGO wastewater treatment using anaerobic rotating biological contactor

Experimental studies were done in a laboratory scale Anaerobic Rotating Biological Contactor (RBC), for treatment of Synthetic sago wastewater. This paper describes the development and laboratory testing of an Anaerobic RBC process that couples the advantages of the fixed film horizontal flow RBC process with the high strength, starch degradation capabilities of anaerobic systems. The reactor was operated at ambient temperature and was subjected to organic and hydraulic loading rates. The reactor performance with respect to Chemical Oxygen Demand (COD) removal, alkalinity, volatile acids at each stage and biogas production were evaluated. The Anaerobic RBC reactor liquid volume is 70 litres and total disc surface area is 4.45 m². The reactor was operated with about 100% of the disc area submerged and with a rotational speed held constant at 9?rev/min. The synthetic sago wastewater was started with a COD value of 1087?mg/l at a hydraulic retention time(HRT) of 42?h and it was varied till maximum COD of 9522?mg/l. From the present study, the optimum COD load was found to be 6860?mg/l with a COD removal efficiency of 97.2%.With this optimum COD load, hydraulic loading rate(HLR) study was done at 24?h to 48?h HRT. COD removal efficiencies at hydraulic loading rates were compared with the work of Subrahmanyam &; Sastry (1988). From the present study, the proportionality coefficient was found to be 1.18 with process efficiencies at different hydraulic loading rates.     

Kinetic Modelling and Characterization of Microbial Community Present in a Full-Scale UASB Reactor Treating Brewery Effluent

The performance of a full-scale upflow anaerobic sludge blanket (UASB) reactor treating brewery wastewater was investigated by microbial analysis and kinetic modelling. The microbial community present in the granular sludge was detected using fluorescent in situ hybridization (FISH) and further confirmed using polymerase chain reaction. A group of 16S rRNA based fluorescent probes and primers targeting Archaea and Eubacteria were selected for microbial analysis. FISH results indicated the presence and dominance of a significant amount of Eubacteria and diverse group of methanogenic Archaea belonging to the order Methanococcales, Methanobacteriales, and Methanomicrobiales within in the UASB reactor. The influent brewery wastewater had a relatively high amount of volatile fatty acids chemical oxygen demand (COD), 2005 mg/l and the final COD concentration of the reactor was 457 mg/l. The biogas analysis showed 60–69 % of methane, confirming the presence and activities of methanogens within the reactor. Biokinetics of the degradable organic substrate present in the brewery wastewater was further explored using Stover and Kincannon kinetic model, with the aim of predicting the final effluent quality. The maximum utilization rate constant U _max and the saturation constant (K _B) in the model were estimated as 18.51 and 13.64 g/l/day, respectively. The model showed an excellent fit between the predicted and the observed effluent COD concentrations. Applicability of this model to predict the effluent quality of the UASB reactor treating brewery wastewater was evident from the regression analysis (R ²?=?0.957) which could be used for optimizing the reactor performance.     

Anaerobic treatment of wastewater from a food-manufacturing plant with a low concentration of organic matter and regeneration of usable pure water

Wastewater from a food-manufacturing plant with a low concentration of organic matter below 100 mg/l TOC was first treated at 37°C in an anaerobic fluidized-bed reactor (AFBR) or in an upflow anaerobic sludge blanket (UASB). The TOC removal efficiency in both reactors decreased from 85% to 65% as the influent TOC concentration decreased from 100 to 35 mg/l at a hydraulic retention time (HRT) of 6 h. Treatment at an HRT of 4 h resulted in an effluent TOC concentration of 11 to 15 mg/l. The concentration of suspended solids in the effluent could be reduced to 20 mg/l, which corresponded to 7% of that of the influent. The effluent from both reactors was then treated anaerobically in a fixed-bed reactor system. The TOC concentration and optical density (OD) of the effluent from the aerobic treatment were reduced to 5 mg/l and 0.005, respectively, at an HRT of 2 h. When anaerobically or aerobically treated effluent was passed over an activated carbon column, the effluent TOC concentration was reduced to 2 to 3 mg/l. The conductivity of 1.3 mS/cm in raw wastewater, which was not removed through the above treatments, was reduced to 0.001 mS/cm on an ion-exchange resin column. An effluent quality corresponding to that of ultra-pure water for industrial use was finally attained by the treatment in this multi-step system.     

Geographic patterns and environmental correlates of taxonomic and phylogenetic diversity of aquatic plants in China

Studies on large-scale geographic patterns of aquatic plant diversity can promote research on the generality of macroecological patterns in different ecosystems. Here, we compiled a checklist of 889 aquatic angiosperms in China, including 738 helophytes (emergent and marshy plants) and 151 hydrophytes (submerged, free-floating, and floating-leaved plants). We explore the geographic patterns and environmental correlates of aquatic plant diversity based on six metrics including species richness (SR), weighted endemism (WE), phylogenetic diversity (PD), phylogenetic endemism (PE), the standardized effect size of phylogenetic diversity (PDses), and the standardized effect size of mean phylogenetic distance (MPDses). Our results show that the diversity of aquatic plants in China is extremely uneven, with high diversity in southeastern China and low diversity in northwestern China, and the geographic patterns of taxonomic and PD are generally consistent. The pattern of helophytes differs from that of hydrophytes. Notably, the wavy-shaped pattern of aquatic plant diversity (especially SR and PD for hydrophytes) across the latitude observed in this study is not consistent with those previously observed for aquatic plants in other continents. Climatic variables and water environmental variables are the main drivers of aquatic plant diversity in China; however, the effects of individual variables differ between helophytes and hydrophytes. Water environmental variables have a greater impact on PDses and MPDses of hydrophytes than those of helophytes. Overall, our work provides insight into understanding the large-scale patterns of aquatic plant diversity and is a critical addition to previous studies on the macroecological pattern of terrestrial organisms.