Characterization of a trifunctional mimivirus mRNA capping enzyme and crystal structure of the RNA triphosphatase domain

The RNA triphosphatase (RTPase) components of the mRNA capping apparatus are a bellwether of eukaryal taxonomy. Fungal and protozoal RTPases belong to the triphosphate tunnel metalloenzyme (TTM) family, exemplified by yeast Cet1. Several large DNA viruses encode metal-dependent RTPases unrelated to the cysteinyl-phosphatase RTPases of their metazoan host organisms. The origins of DNA virus RTPases are unclear because they are structurally uncharacterized. Mimivirus, a giant virus of amoeba, resembles poxviruses in having a trifunctional capping enzyme composed of a metal-dependent RTPase module fused to guanylyltransferase (GTase) and guanine-N7 methyltransferase domains. The crystal structure of mimivirus RTPase reveals a minimized tunnel fold and an active site strikingly similar to that of Cet1. Unlike homodimeric fungal RTPases, mimivirus RTPase is a monomer. The mimivirus TTM-type RTPase-GTase fusion resembles the capping enzymes of amoebae, providing evidence that the ancestral large DNA virus acquired its capping enzyme from a unicellular host.     

Magnesium-binding studies reveal fundamental differences between closely related RNA triphosphatases

The Chlorella virus RNA triphosphatase (cvRTPase) is involved in the formation of the RNA cap structure found at the 5′-end of the viral mRNAs and requires magnesium ions to mediate its catalytic activity. To extend our studies on the role of metal ions in phosphohydrolysis, we have used a combination of fluorescence spectroscopy, circular dichroism, denaturation studies and thermodynamic analyses to monitor the binding of magnesium ions to the cvRTPase. Using these techniques, the thermodynamic forces responsible for the interaction of metal ions with an RNA triphosphatase were also evaluated for the first time. Our thermodynamic analyses indicate that the initial association of magnesium with the cvRTPase is dominated by a favorable entropic effect and is accompanied by the release of eight water molecules from the enzyme. Moreover, both fluorescence spectroscopy and circular dichroism assays indicated that minor conformational changes were occurring upon magnesium binding. Mutational studies were also performed and confirmed the importance of three specific glutamate residues located in the active site of the enzyme for the binding of magnesium ions. Finally, in contrast to the yeast RNA triphosphatase, we demonstrate that the binding of magnesium ions to the cvRTPase does not lead to the stabilization of the ground state binding of the RNA substrate. Based on the results of the present study, we hypothesize that the binding of magnesium ions induces local conformational perturbations in the active site residues that ultimately positions the lateral chains of critical amino acids involved in catalysis. Our results highlight fundamental differences in the role of magnesium ions in the phosphohydrolase reactions catalyzed by the cvRTPase and the closely related yeast RNA triphosphatase.     

Computational Insights into the Inhibitory Mechanism of Human AKT1 by an Orally Active Inhibitor,MK-2206

The AKT signaling pathway has been identified as an important target for cancer therapy. Among small-molecule inhibitors of AKT that have shown tremendous potential in inhibiting cancer, MK-2206 is a highly potent, selective and orally active allosteric inhibitor. Promising preclinical anticancer results have led to entry of MK-2206 into Phase I/II clinical trials. Despite such importance, the exact binding mechanism and the molecular interactions of MK-2206 with human AKT are not available. The current study investigated the exact binding mode and the molecular interactions of MK-2206 with human AKT isoforms using molecular docking and (un)binding simulation analyses. The study also involved the docking analyses of the structural analogs of MK-2206 to AKT1 and proposed one as better inhibitor. The Dock was used for docking simulations of MK-2206 into the allosteric site of AKT isoforms. The Ligplot+ was used for analyses of polar and hydrophobic interactions between AKT isoforms and the ligands. The MoMa-LigPath web server was used to simulate the ligand (un)binding from the binding site to the surface of the protein. In the docking and (un)binding simulation analyses of MK-2206 with human AKT1, the Trp-80 was the key residue and showed highest decrease in the solvent accessibility, highest number of hydrophobic interactions, and the most consistent involvement in all (un)binding simulation phases. The number of molecular interactions identified and calculated binding energies and dissociation constants from the co-complex structures of these isoforms, clearly explained the varying affinity of MK-2206 towards these isoforms. The (un)binding simulation analyses identified various additional residues which despite being away from the binding site, play important role in initial binding of the ligand. Thus, the docking and (un)binding simulation analyses of MK-2206 with AKT isoforms and its structure analogs will provide a suitable model for studying drug-protein interaction and will help in designing better drugs.     

Highly efficient incorporation of the fluorescent nucleotide analogs tC and tCO by Klenow fragment

Studies of the mechanisms by which DNA polymerases select the correct nucleotide frequently employ fluorescently labeled DNA to monitor conformational rearrangements of the polymerase–DNA complex in response to incoming nucleotides. For this purpose, fluorescent base analogs play an increasingly important role because they interfere less with the DNA–protein interaction than do tethered fluorophores. Here we report the incorporation of the 5′-triphosphates of two exceptionally bright cytosine analogs, 1,3-diaza-2-oxo-phenothiazine (tC) and its oxo-homolog, 1,3-diaza-2-oxo-phenoxazine (tC^O), into DNA by the Klenow fragment. Both nucleotide analogs are polymerized with slightly higher efficiency opposite guanine than cytosine triphosphate and are shown to bind with nanomolar affinity to the DNA polymerase active site, according to fluorescence anisotropy measurements. Using this method, we perform competitive binding experiments and show that they can be used to determine the dissociation constant of any given natural or unnatural nucleotide. The results demonstrate that the active site of the Klenow fragment is flexible enough to tolerate base pairs that are size-expanded in the major groove. In addition, the possibility to enzymatically polymerize a fluorescent nucleotide with high efficiency complements the tool box of biophysical probes available to study DNA replication.     

Intestinal transport of TRH analogs through PepT1: the role of in silico and in vitro modeling

The present study involves molecular docking, molecular dynamics (MD) simulation studies, and Caco‐2 cell monolayer permeability assay to investigate the effect of structural modifications on PepT1‐mediated transport of thyrotropin releasing hormone (TRH) analogs. Molecular docking of four TRH analogs was performed using a homology model of human PepT1 followed by subsequent MD simulation studies. Caco‐2 cell monolayer permeability studies of four TRH analogs were performed at apical to basolateral and basolateral to apical directions. Inhibition experiments were carried out using Gly‐Sar, a typical PepT1 substrate, to confirm the PepT1‐mediated transport mechanism of TRH analogs. P_app of the four analogs follows the order: NP‐1894 < NP‐2378 < NP‐1896 < NP‐1895. Higher absorptive transport was observed in the case of TRH analogs, indicating the possibility of a carrier‐mediated transport mechanism. Further, the significant inhibition of the uptake of Gly‐Sar by TRH analogs confirmed the PepT1‐mediated transport mechanism. Glide docking scores of all the four analogues were in good agreement with their transport rates, suggesting the role of substrate binding affinity in the PepT1‐mediated transport of TRH analogs. MD simulation studies revealed that the polar interactions with amino acid residues present in the active site are primarily responsible for substrate binding, and a downward trend was observed with the increase in bulkiness at the N‐histidyl moiety of TRH analogs. Copyright © 2014 John Wiley & Sons, Ltd.     

A Highlights from MBoC Selection: Structural basis for recognition of the Sec4 Rab GTPase by its effector,the Lgl/tomosyn homologue,Sro7

Members of the tomosyn/Lgl/Sro7 family play important roles in vesicle trafficking and cell polarity in eukaryotic cells. The yeast homologue, Sro7, is believed to act as a downstream effector of the Sec4 Rab GTPase to promote soluble N-ethylmaleimide–sensitive factor adaptor protein receptor (SNARE) assembly during Golgi-to–cell surface vesicle transport. Here we describe the identification of a Sec4 binding site on the surface of Sro7 that is contained within a cleft created by the junction of two adjacent β-propellers that form the core structure of Sro7. Computational docking experiments suggested four models for interaction of GTP-Sec4 with the Sro7 binding cleft. Further mutational and biochemical analyses confirmed that only one of the four docking arrangements is perfectly consistent with our genetic and biochemical interaction data. Close examination of this docking model suggests a structural basis for the high substrate and nucleotide selectivity in effector binding by Sro7. Finally, analysis of the surface variation within the homologous interaction site on tomosyn-1 and Lgl-1 structural models suggests a possible conserved Rab GTPase effector function in tomosyn vertebrate homologues.     

Human polymerase α inhibitors for skin tumors. Part 2. Modeling,synthesis and influence on normal and transformed keratinocytes of new thymidine and purine derivatives

Recently, the three-dimensional structure of the active site of human DNA polymerase α (pol α) was proposed based on the application of molecular modeling methods and molecular dynamic simulations. The modeled structure of the enzyme was used for docking selective inhibitors (nucleotide analogs and the non-nucleoside inhibitor aphidicolin) in its active site in order to design new drugs for actinic keratosis and squamous cell carcinoma (SCC). The resulting complexes explained the geometrical and physicochemical interactions of the inhibitors with the amino acid residues involved in binding to the catalytic site, and offered insight into the experimentally derived binding data. The proposed structures were synthesized and tested in vitro for their influence on human keratinocytes and relevant tumor cell lines. Effects were compared to aphidicolin which inhibits pol α in a non-competitive manner, as well as to diclofenac and 5-fluorouracil, both approved for therapy of actinic keratosis. Here we describe three new nucleoside analogs inhibiting keratinocyte proliferation by inhibiting DNA synthesis and inducing apoptosis and necrosis. Thus, the combination of modeling studies and in vitro tests should allow the derivation of new drug candidates for the therapy of skin tumors, given that the agents are not relevant substrates of nucleotide transporters expressed by skin cancer cells. Kinases for nucleoside activation were detected, too, corresponding with the observed effects of nucleoside analogs.     

Mapping multiple potential ATP binding sites on the matrix side of the bovine ADP/ATP carrier by the combined use of MD simulation and docking

The mitochondrial adenosine diphosphate/adenosine triphosphate (ADP/ATP) carrier-AAC-was crystallized in complex with its specific inhibitor carboxyatractyloside (CATR). The protein consists of a six-transmembrane helix bundle that defines the nucleotide translocation pathway, which is closed towards the matrix side due to sharp kinks in the odd-numbered helices. In this paper, we describe the interaction between the matrix side of the AAC transporter and the ATP(4-) molecule using carrier structures obtained through classical molecular dynamics simulation (MD) and a protein-ligand docking procedure. Fifteen structures were extracted from a previously published MD trajectory through clustering analysis, and 50 docking runs were carried out for each carrier conformation, for a total of 750 runs ("MD docking"). The results were compared to those from 750 docking runs performed on the X-ray structure ("X docking"). The docking procedure indicated the presence of a single interaction site in the X-ray structure that was conserved in the structures extracted from the MD trajectory. MD docking showed the presence of a second binding site that was not found in the X docking. The interaction strategy between the AAC transporter and the ATP(4-) molecule was analyzed by investigating the composition and 3D arrangement of the interaction pockets, together with the orientations of the substrate inside them. A relationship between sequence repeats and the ATP(4-) binding sites in the AAC carrier structure is proposed.     

Structure-activity relationship of sphingomyelin analogs with sphingomyelinase from Bacillus cereus

The aim of this study was to examine how structural properties of different sphingomyelin (SM) analogs affected their substrate properties with sphingomyelinase (SMase) from Bacillus cereus. Using molecular docking and dynamics simulations (for SMase-SM complex), we then attempted to explain the relationship between SM structure and enzyme activity. With both micellar and monolayer substrates, 3O-methylated SM was found not to be degraded by the SMase. 2N-methylated SM was a substrate, but was degraded at about half the rate of its 2NH-SM control. PhytoPSM was readily hydrolyzed by the enzyme. PSM lacking one methyl in the phosphocholine head group was a good substrate, but PSM lacking two or three methyls failed to act as substrates for SMase. Based on literature data, and our docking and MD simulations, we conclude that the 3O-methylated PSM fails to interact with Mg(2+) and Glu53 in the active site, thus preventing hydrolysis. Methylation of 2NH was not crucial for binding to the active site, but appeared to interfere with an induced fit activation of the SMase via interaction with Asp156. An OH on carbon 4 in the long-chain base of phytoPSM appeared not to interfere with the 3OH interacting with Mg(2+) and Glu53 in the active site, and thus did not interfere with catalysis. Removing two or three methyls from the PSM head group apparently increased the positive charge on the terminal N significantly, which most likely led to ionic interactions with Glu250 and Glu155 adjacent to the active site. This likely interaction could have misaligned the SM substrate and hindered proper catalysis.     

Molecular modeling study for conformational changes of Sirtuin 2 due to substrate and inhibitor binding

Sirtuin is a member of NAD(+)-dependent deacetylase family. The structural details of Sirtuin 2 (SIRT2) complex will be very useful to discover the drug which might have beneficial effects on various diseases like cancer, diabetes, etc. Unfortunately, SIRT2 complex structure is not available yet, hence molecular docking was carried out to dock the substrate (NAD(+) and acetylated lysine) and inhibitor (sirtinol) in the NAD(+) binding site. The suitable binding orientation of substrate and inhibitor in the SIRT2 active site was selected and subjected to 5 ns molecular dynamics simulations to adjust the binding orientation of inhibitor and substrate as well as to identify the conformational changes in the active site. The result provides an insight about 3D SIRT2 structural details as well as the importance of F96 in deacetylation function. In addition, our simulations revealed the displacement of F96 upon substrate and inhibitor binding, inducing an extended conformation of loop3 and changing its interactions with the rest of SIRT2. We believe that our study could be helpful to gain a structural insight of SIRT2 and to design the receptor-based inhibitors.     

Molecular modeling study for conformational changes of Sirtuin 2 due to substrate and inhibitor binding

Sirtuin is a member of NAD⁺-dependent deacetylase family. The structural details of Sirtuin 2 (SIRT2) complex will be very useful to discover the drug which might have beneficial effects on various diseases like cancer, diabetes, etc. Unfortunately, SIRT2 complex structure is not available yet, hence molecular docking was carried out to dock the substrate (NAD⁺ and acetylated lysine) and inhibitor (sirtinol) in the NAD⁺ binding site. The suitable binding orientation of substrate and inhibitor in the SIRT2 active site was selected and subjected to 5?ns molecular dynamics simulations to adjust the binding orientation of inhibitor and substrate as well as to identify the conformational changes in the active site. The result provides an insight about 3D SIRT2 structural details as well as the importance of F96 in deacetylation function. In addition, our simulations revealed the displacement of F96 upon substrate and inhibitor binding, inducing an extended conformation of loop3 and changing its interactions with the rest of SIRT2. We believe that our study could be helpful to gain a structural insight of SIRT2 and to design the receptor-based inhibitors.     

Substrate specificity of glycogen synthase from rabbit skeletal muscles

Nitrous bases were shown to play an essential role in the specificity of active and adenyl nucleotide binding sites. Pyrimidine base determines the substrate specificity of rabbit skeletal muscle glycogen synthase; a crucial role in this process is ascribed to the lactam fragment of the pyrimidine cycle. The 2-oxo group was also shown to be involved in substrate binding. The adenyl nucleotide binding site interacts only with 6-aminopurine derivatives. A negative interaction was found between the enzyme active center and the adenyl nucleotide binding site.     

Specificity of rabbit muscle phosphofructokinase for nucleotides as substrates or as allosteric effectors.

Various ATP and AMP analogs with modifications in the base moiety or in the polyphosphate chain were tested as substrates and/or as allosteric effectors of rabbit muscle phosphofructokinase. The significance of different structural elements for the nucleotide-enzyme interaction is discussed. While all investigated triphosphate analogs with a modified purine base are substrates for phosphofructokinase, those with a modified polyphosphate chain are competitive inhibitors. 5′-Adenylyl-(β,γ-methylene) diphosphonate, which is a weak competitive inhibitor, is shown to have a high affinity for the allosteric site of phosphofructokinase. Among the investigated monophosphate analogs only adenosine-N¹-oxide 5′-monophosphate can reverse the inhibitory effect of excessive ATP. A qualitative correlation is found between the quenching of the phospho-fructokinase-8-anilino-1-naphthalene-sulfonate fluorescence and the ability of the nucleotide analogs to act as substrates or as allosteric effectors of phosphofructokinase. It is concluded that the interaction of ATP with the allosteric site is more complex than that with the substrate site and requires both an intact adenine moiety and an intact terminal phosphate group for full activity.     

Comparative surface geometry of the protein kinase family

Identifying conserved pockets on the surfaces of a family of proteins can provide insight into conserved geometric features and sites of protein–protein interaction. Here we describe mapping and comparison of the surfaces of aligned crystallographic structures, using the protein kinase family as a model. Pockets are rapidly computed using two computer programs, FADE and Crevasse. FADE uses gradients of atomic density to locate grooves and pockets on the molecular surface. Crevasse, a new piece of software, splits the FADE output into distinct pockets. The computation was run on 10 kinase catalytic cores aligned on the αF‐helix, and the resulting pockets spatially clustered. The active site cleft appears as a large, contiguous site that can be subdivided into nucleotide and substrate docking sites. Substrate specificity determinants in the active site cleft between serine/threonine and tyrosine kinases are visible and distinct. The active site clefts cluster tightly, showing a conserved spatial relationship between the active site and αF‐helix in the C‐lobe. When the αC‐helix is examined, there are multiple mechanisms for anchoring the helix using spatially conserved docking sites. A novel site at the top of the N‐lobe is present in all the kinases, and there is a large conserved pocket over the hinge and the αC‐β4 loop. Other pockets on the kinase core are strongly conserved but have not yet been mapped to a protein–protein interaction. Sites identified by this algorithm have revealed structural and spatially conserved features of the kinase family and potential conserved intermolecular and intramolecular binding sites.     

Rational design of novel diketoacid-containing ferrocene inhibitors of HIV-1 integrase

Molecular interaction field, density functional, and docking studies of novel potential ferrocene inhibitors of HIV-1 integrase (IN) are reported. The high docking scores, analysis of the ligand-receptor interactions in the active site as well as the molecular interaction potential calculations at the binding site of the receptor indicate important features for novel HIV-1 IN inhibitors. We also confirm in this work a novel binding trench in HIV-1 integrase, recently reported in a theoretical work by other authors. This observation may be interesting since the lack of detailed structural information about IN-ligand interactions has hampered the design of IN inhibitors. Our proposed ligands are open to experimental synthesis and testing.     

Structure–activity relationship of sphingomyelin analogs with sphingomyelinase from Bacillus cereus

The aim of this study was to examine how structural properties of different sphingomyelin (SM) analogs affected their substrate properties with sphingomyelinase (SMase) from Bacillus cereus. Using molecular docking and dynamics simulations (for SMase–SM complex), we then attempted to explain the relationship between SM structure and enzyme activity. With both micellar and monolayer substrates, 3O-methylated SM was found not to be degraded by the SMase. 2N-methylated SM was a substrate, but was degraded at about half the rate of its 2NH–SM control. PhytoPSM was readily hydrolyzed by the enzyme. PSM lacking one methyl in the phosphocholine head group was a good substrate, but PSM lacking two or three methyls failed to act as substrates for SMase. Based on literature data, and our docking and MD simulations, we conclude that the 3O-methylated PSM fails to interact with Mg^2 + and Glu53 in the active site, thus preventing hydrolysis. Methylation of 2NH was not crucial for binding to the active site, but appeared to interfere with an induced fit activation of the SMase via interaction with Asp156. An OH on carbon 4 in the long-chain base of phytoPSM appeared not to interfere with the 3OH interacting with Mg^2 + and Glu53 in the active site, and thus did not interfere with catalysis. Removing two or three methyls from the PSM head group apparently increased the positive charge on the terminal N significantly, which most likely led to ionic interactions with Glu250 and Glu155 adjacent to the active site. This likely interaction could have misaligned the SM substrate and hindered proper catalysis.     

Multiple conformations of the nucleotide site of Kinesin family motors in the triphosphate state

Identifying conformational changes in kinesin family motors associated with nucleotide and microtubule (MT) binding is essential to determining an atomic-level model for force production and motion by the motors. Using the mobility of nucleotide analog spin probes bound at the active sites of kinesin family motors to monitor conformational changes, we previously demonstrated that, in the ADP state, the open nucleotide site closes upon MT binding [Naber, N., Minehardt, T. J., Rice, S., Chen, X., Grammer, J., Matuska, M., et al. (2003). Closing of the nucleotide pocket of kinesin family motors upon binding to microtubules. Science, 300, 798-801]. We now extend these studies to kinesin-1 (K) and ncd (nonclaret disjunctional protein) motors in ATP and ATP-analog states. Our results reveal structural differences between several triphosphate and transition-state analogs bound to both kinesin and ncd in solution. The spectra of kinesin/ncd in the presence of SLADP•AlFx/BeFx and kinesin, with the mutation E236A (K-E236A; does not hydrolyze ATP) bound to ATP, show an open conformation of the nucleotide pocket similar to that seen in the kinesin/ncd•ADP states. In contrast, the triphosphate analogs K•SLAMPPNP and K-E236A•SLAMPPNP induce a more immobilized component of the electron paramagnetic resonance spectrum, implying closing of the nucleotide site. The MT-bound states of all of the triphosphate analogs reveal two novel spectral components. The equilibrium between these two components is only weakly dependent on temperature. Both components have more restricted mobility than observed in MT-bound diphosphate states. Thus, the closing of the nucleotide pocket when the diphosphate state binds to MTs is amplified in the triphosphate state, perhaps promoting accelerated ATP hydrolysis. Consistent with this idea, molecular dynamics simulations show a good correlation between our spectroscopic data, X-ray crystallography, and the electron microscopy of MT-bound triphosphate-analog states.     

Crystal structure and activity of Kunjin virus NS3 helicase; protease and helicase domain assembly in the full length NS3 protein

Flaviviral NS3 is a multifunctional protein displaying N-terminal protease activity in addition to C-terminal helicase, nucleoside 5'-triphosphatase (NTPase), and 5'-terminal RNA triphosphatase (RTPase) activities. NS3 is held to support the separation of RNA daughter and template strands during viral replication. In addition, NS3 assists the initiation of replication by unwinding the RNA secondary structure in the 3' non-translated region (NTR). We report here the three-dimensional structure (at 3.1 A resolution) of the NS3 helicase domain (residues 186-619; NS3:186-619) from Kunjin virus, an Australian variant of the West Nile virus. As for homologous helicases, NS3:186-619 is composed of three domains, two of which are structurally related and held to host the NTPase and RTPase active sites. The third domain (C-terminal) is involved in RNA binding/recognition. The NS3:186-619 construct occurs as a dimer in solution and in the crystals. We show that NS3:186-619 displays both ATPase and RTPase activities, that it can unwind a double-stranded RNA substrate, being however inactive on a double-stranded DNA substrate. Analysis of different constructs shows that full length NS3 displays increased helicase activity, suggesting that the protease domain plays an assisting role in the RNA unwinding process. The structural interaction between the helicase and protease domain has been assessed using small angle X-ray scattering on full length NS3, disclosing that the protease and helicase domains build a rather elongated molecular assembly differing from that observed in the NS3 protein from hepatitis C virus.