How microtubules get fluorescent speckles.

The dynamics of microtubules in living cells can be seen by fluorescence microscopy when fluorescently labeled tubulin is microinjected into cells, mixing with the cellular tubulin pool and incorporating into microtubules. The subsequent fluorescence distribution along microtubules can appear "speckled" in high-resolution images obtained with a cooled CCD camera (Waterman-Storer and Salmon, 1997. J. Cell Biol. 139:417-434). In this paper we investigate the origins of these fluorescent speckles. In vivo microtubules exhibited a random pattern of speckles for different microtubules and different regions of an individual microtubule. The speckle pattern changed only after microtubule shortening and regrowth. Microtubules assembled from mixtures of labeled and unlabeled pure tubulin in vitro also exhibited fluorescent speckles, demonstrating that cellular factors or organelles do not contribute to the speckle pattern. Speckle contrast (measured as the standard deviation of fluorescence intensity along the microtubule divided by the mean fluorescence intensity) decreased as the fraction of labeled tubulin increased, and it was not altered by the binding of purified brain microtubule-associated proteins. Computer simulation of microtubule assembly with labeled and unlabeled tubulin showed that the speckle patterns can be explained solely by the stochastic nature of tubulin dimer association with a growing end. Speckle patterns can provide fiduciary marks in the microtubule lattice for motility studies or can be used to determine the fraction of labeled tubulin microinjected into living cells.     

Equilibrium studies of a fluorescent paclitaxel derivative binding to microtubules

A fluorescent derivative of paclitaxel, 3'-N-m-aminobenzamido-3'-N-debenzamidopaclitaxel (N-AB-PT), has been prepared in order to probe paclitaxel-microtubule interactions. Fluorescence spectroscopy was used to quantitatively assess the association of N-AB-PT with microtubules. N-AB-PT was found equipotent with paclitaxel in promoting microtubule polymerization. Paclitaxel and N-AB-PT underwent rapid exchange with each other on microtubules assembled from GTP-, GDP-, and GMPCPP-tubulin. The equilibrium binding parameters for N-AB-PT to microtubules assembled from GTP-tubulin were derived through fluorescence titration. N-AB-PT bound to two types of sites on microtubules (K(d1) = 61 +/- 7.0 nM and K(d2) = 3.3 +/- 0.54 microM). The stoichiometry of each site was less than one ligand per tubulin dimer in the microtubule (n(1) = 0.81 +/- 0.03 and n(2) = 0.44 +/- 0.02). The binding experiments were repeated after exchanging the GTP for GDP or for GMPCPP. It was found that N-AB-PT bound to a single site on microtubules assembled from GDP-tubulin with a dissociation constant of 2.5 +/- 0.29 microM, and that N-AB-PT bound to a single site on microtubules assembled from GMPCPP-tubulin with a dissociation constant of 15 +/- 4.0 nM. It therefore appears that microtubules contain two types of binding sites for paclitaxel and that the binding site affinity for paclitaxel depends on the nucleotide content of tubulin. It has been established that paclitaxel binding does not inhibit GTP hydrolysis and microtubules assembled from GTP-tubulin in the presence of paclitaxel contain almost exclusively GDP at the E-site. We propose that although all the subunits of the microtubule at steady state are the same "GDP-tubulin-paclitaxel", they are formed through two paths: paclitaxel binding to a tubulin subunit before its E-site GTP hydrolysis is of high affinity, and paclitaxel binding to a tubulin subunit containing hydrolyzed GDP at its E-site is of low affinity.     

The use of the fluorescence photobleaching recovery technique to study the self-assembly of tubulin

Fluorescently labeled microtubule-associated proteins or poly-L-lysine (13,000 MW) were prepared by reaction with fluorescein isothiocyanate. The labeled compounds were used as probes of the assembly of calf brain tubulin using fluorescence photobleaching recovery techniques which allow measurement of the diffusion coefficient and percentage mobility of the fluorescent probe. When unfractionated tubulin (defined as material containing tubulin and microtubule-associated proteins) was polymerized at room temperature or 37 degrees C, either probe could be incorporated into microtubules, since the observed diffusion coefficient (approximately 1.7 X 10(-8) cm2/s) was much slower than that for either probe free in solution. The microtubules formed in the presence of labeled microtubule-associated proteins were free to diffuse while those formed in the presence of labeled polylysine were partially immobilized. Thus the fluorescence photobleaching recovery technique can be used to measure crosslinking of microtubules as well as assembly or interactions with other structures. When unfractionated tubulin was incubated with labeled polylysine in the presence of Ca2+ at room temperature, the observed diffusion coefficient (approximately 5.1 X 10(-8) cm2/s) probably represents the formation of rings of tubulin. The effect of mild and vigorous shearing, of cholchicine, and of different Mg2+ concentrations on the properties of the system were examined.     

A comparative study of the distribution of fluorescently labeled calmodulin and tubulin in the meiotic apparatus of the mouse oocyte

The localizations of tubulin and calmodulin were investigated in the mouse oocyte during the second meiosis by fluorescently labeling and microinjecting these proteins prepared from porcine brain tissue. When injected, both tubulin and calmodulin were quickly incorporated into the preformed meiotic apparatus of the oocyte at metaphase. The localization of labeled tubulin was coincident with that of birefringence. However, the localization of labeled calmodulin was somewhat different: the fluorescence of calmodulin was intense in the polar regions of the spindle. After the chromosomes began to move, followed by parthenogenetic activation upon microinjection of a calcium buffer, these two fluorescent proteins, localized in the meiotic apparatus, moved to the interzonal region of the spindle during anaphase. At late anaphase and throughout telophase, calmodulin was excluded from the mid-bodylike structures in the interzonal region, whereas tubulin did accumulate in these structures.     

Enhanced microtubule binding and tubulin assembly properties of conformationally constrained paclitaxel derivatives

Microtubule binding and tubulin assembly promotion by a series of conformationally restricted paclitaxel (PTX) derivatives was investigated. In these derivatives, the C-4 acetate of the taxane is tethered to the C-3' phenyl at ortho and meta positions with different length linkers. The apparent affinity of these derivatives for GMPCPP-stabilized microtubules was assessed by a competition assay, and their influence on microtubule polymerization was evaluated by measuring the critical concentration of GDP-tubulin in the presence of the respective molecule. In general, taxane derivatives with higher apparent affinity for microtubules induced tubulin assembly more efficiently. Among the derivatives, molecules with the shortest tether display the strongest affinity for microtubules. These derivatives exhibited enhanced microtubule stabilization properties and efficiently induced GDP-tubulin assembly into microtubules at low temperature of 12 degrees C and in the absence of Mg2+ ions in 0.1 M PIPES. Based on molecular dynamics simulations, we propose that the enhanced ability to assemble microtubules by these taxane derivatives is linked to their ability to effectively shape the conformation of the M-loop of tubulin for cross-protofilament interaction.     

The microtubule stabilizing agent laulimalide does not bind in the taxoid site,kills cells resistant to paclitaxel and epothilones,and may not require its epoxide moiety for activity

Laulimalide is a cytotoxic natural product that stabilizes microtubules. The compound enhances tubulin assembly, and laulimalide is quantitatively comparable to paclitaxel in its effects on the reaction. Laulimalide is also active in P-glycoprotein overexpressing cells, while isolaulimalide, a congener without the drug's epoxide moiety, was reported to have negligible cytotoxic and biochemical activity [Mooberry et al. (1999) Cancer Res. 59, 653-660]. We report here that laulimalide binds at a site on tubulin polymer that is distinct from the taxoid site. We found that laulimalide, while as active as paclitaxel, epothilone A, and eleutherobin in promoting the assembly of cold-stable microtubules, was unable to inhibit the binding of radiolabeled paclitaxel or of 7-O-[N-(2,7-difluoro-4'-fluoresceincarbonyl)-L-alanyl]paclitaxel, a fluorescent paclitaxel derivative, to tubulin. Confirming this observation, we demonstrated that microtubules formed in the presence of both laulimalide and paclitaxel contained near-molar quantities, relative to tubulin, of both drugs. Laulimalide was active against cell lines resistant to paclitaxel or epothilones A and B on the basis of mutations in the M40 human beta-tubulin gene. We also report that a laulimalide analogue lacking the epoxide moiety, while less active than laulimalide in biochemical and cellular systems, is probably more active than isolaulimalide. Further exploration of the role of the epoxide in the interaction of laulimalide with tubulin is therefore justified.     

Design, synthesis and biological evaluation of a simplified fluorescently labeled discodermolide as a molecular probe to study the binding of discodermolide to tubulin

The design, synthesis, and biological evaluation of a simplified fluorescently labeled discodermolide analogue possessing a dimethylaminobenzoyl fluorophore has been achieved. Stereoselective Suzuki coupling and Horner-Wadsworth-Emmons reaction comprised the key tactics for its construction. The analogue exhibited qualitatively similar activity to paclitaxel in a tubulin assembly assay, and it can thus be used as a fluorescent molecular probe to explore the local environment of the discodermolide binding site on tubulin. The results of fluorescence measurements on the tubulin-bound analogue are reported.     

Structural intermediates in the assembly of taxoid-induced microtubules and GDP-tubulin double rings: time-resolved X-ray scattering.

We have studied the self-association reactions of purified GDP-liganded tubulin into double rings and taxoid-induced microtubules, employing synchrotron time-resolved x-ray solution scattering. The experimental scattering profiles have been interpreted by reference to the known scattering profiles to 3 nm resolution and to the low-resolution structures of the tubulin dimer, tubulin double rings, and microtubules, and by comparison with oligomer models and model mixtures. The time courses of the scattering bands corresponding to the different structural features were monitored during the assembly reactions under varying biochemical conditions. GDP-tubulin essentially stays as a dimer at low Mg(2+) ion activity, in either the absence or presence of taxoid. Upon addition of the divalent cations, it associates into either double-ring aggregates or taxoid-induced microtubules by different pathways. Both processes have the formation of small linear (short protofilament-like) tubulin oligomers in common. Tubulin double-ring aggregate formation, which is shown by x-ray scattering to be favored in the GDP- versus the GTP-liganded protein, can actually block microtubule assembly. The tubulin self-association leading to double rings, as determined by sedimentation velocity, is endothermic. The formation of the double-ring aggregates from oligomers, which involves additional intermolecular contacts, is exothermic, as shown by x-ray and light scattering. Microtubule assembly can be initiated from GDP-tubulin dimers or oligomers. Under fast polymerization conditions, after a short lag time, open taxoid-induced microtubular sheets have been clearly detected (monitored by the central scattering and the maximum corresponding to the J(n) Bessel function), which slowly close into microtubules (monitored by the appearance of their characteristic J(0), J(3), and J (n) - (3) Bessel function maxima). This provides direct evidence for the bidimensional assembly of taxoid-induced microtubule polymers in solution and argues against helical growth. The rate of microtubule formation was increased by the same factors known to enhance taxoid-induced microtubule stability. The results suggest that taxoids induce the accretion of the existing Mg(2+)-induced GDP-tubulin oligomers, thus forming small bidimensional polymers that are necessary to nucleate the microtubular sheets, possibly by binding to or modifying the lateral interaction sites between tubulin dimers.     

Two microtubule-associated proteins of the Arabidopsis MAP65 family function differently on microtubules

The organization and dynamics of microtubules are regulated by microtubule-associated proteins, or MAPs. In Arabidopsis (Arabidopsis thaliana), nine genes encode proteins of the evolutionarily conserved MAP65 family. We proposed that different MAP65s might have distinct roles in the interaction with microtubules. In this study, two AtMAP65 proteins, AtMAP65-1 and AtMAP65-6, were chosen to test this hypothesis in vitro. Although both fusion proteins were able to cosediment with microtubules in vitro, different properties on tubulin polymerization and microtubule bundling were observed. AtMAP65-1 was able to promote tubulin polymerization, enhance microtubule nucleation, and decrease the critical concentration for tubulin polymerization. It also induced the formation of large microtubule bundles by forming cross-bridges between microtubules evenly along the whole length of microtubules. In the presence of AtMAP65-1, microtubule bundles were more resistant to cold and dilution treatments. AtMAP65-6, however, demonstrated no activity in promoting tubulin polymerization and stabilizing preformed microtubules. AtMAP65-6 induced microtubules to form a mesh-like network with individual microtubules. Cross-bridge-like interactions were only found at regional sites between microtubules. The microtubule network induced by AtMAP65-6 was more resistant to high concentration of NaCl than the bundles induced by AtMAP65-1. Purified monospecific anti-AtMAP65-6 antibodies revealed that AtMAP65-6 was associated with mitochondria in Arabidopsis cells. It was concluded that these two MAP65 proteins were targeted to distinct sites, thus performing distinct functions in Arabidopsis cells.     

Distribution of fluorescently labeled tubulin injected into sand dollar eggs from fertilization through cleavage

Porcine brain tubulin labeled with fluorescein isothiocyanate (FITC) was able to polymerize by itself and co-polymerize with tubulin purified from starfish sperm flagella. When we injected the FITC-labeled tubulin into unfertilized eggs of the sand dollar, Clypeaster japonicus, and the eggs were then fertilized, the labeled tubulin was incorporated into the sperm aster. When injected into fertilized eggs at streak stage, the tubulin was quickly incorporated into each central region of growing asters. It was clearly visualized that the labeled tubulin, upon reaching metaphase, accumulated in the mitotic apparatus and later disappeared over the cytoplasm during interphase. The accumulation of the fluorescence in the mitotic apparatus was observed repeatedly at successive cleavage. After lysis of the fertilized eggs with a microtubule-stabilizing solution, fluorescent fibrous structures around the nucleus and those of the sperm aster and the mitotic apparatus were preserved and coincided with the fibrous structures observed by polarization and differential interference microscopy. We found the FITC-labeled tubulin to be incorporated into the entire mitotic apparatus within 20-30 s when injected into the eggs at metaphase or anaphase. This rapid incorporation of the labeled tubulin into the mitotic apparatus suggests that the equilibrium between mitotic microtubules and tubulin is attained very rapidly in the living eggs. Axonemal tubulin purified from starfish sperm flagella and labeled with FITC was also incorporated into microtubular structures in the same fashion as the FITC-labeled brain tubulin. These results suggest that even FITC-labeled heterogeneous tubulins undergo spatial and stage-specific regulation of assembly-disassembly in the same manner as does sand dollar egg tubulin.     

Cyclostreptin binds covalently to microtubule pores and lumenal taxoid binding sites

Cyclostreptin (1), a natural product from Streptomyces sp. 9885, irreversibly stabilizes cellular microtubules, causes cell cycle arrest, evades drug resistance mediated by P-glycoprotein in a tumor cell line and potently inhibits paclitaxel binding to microtubules, yet it only weakly induces tubulin assembly. In trying to understand this paradox, we observed irreversible binding of synthetic cyclostreptin to tubulin. This results from formation of covalent crosslinks to beta-tubulin in cellular microtubules and microtubules formed from purified tubulin in a 1:1 total stoichiometry distributed between Thr220 (at the outer surface of a pore in the microtubule wall) and Asn228 (at the lumenal paclitaxel site). Unpolymerized tubulin was only labeled at Thr220. Thus, the pore region of beta-tubulin is an undescribed binding site that (i) elucidates the mechanism by which taxoid-site compounds reach the kinetically unfavorable lumenal site and (ii) explains how taxoid-site drugs induce microtubule formation from dimeric and oligomeric tubulin.     

Tubulin oligomers and microtubule oscillations. Antagonistic role of microtubule stabilizers and destabilizers

Several types of non-equilibrium phenomena have been observed in microtubule polymerization, including dynamic instability, assembly overshoot and oscillations. They can be interpreted in terms of interactions between tubulin subunits (= alpha, beta heterodimers), microtubules, and a third state, oligomers, which represent intermediates between microtubule disassembly and the regeneration of assembly-competent subunits by GTP. Here we examine the role of oligomers by varying conditions that stabilize or destabilize microtubules and/or oligomers. By varying their ratio one can drive tubulin assembly either into steady-state microtubules or oligomers. These regimens of assembly conditions are separated by a region where microtubules oscillate. The oscillations can be simulated by computer modelling, based on a reaction scheme involving the three states of tubulin and nucleotide exchange on tubulin subunits, but not on microtubules or oligomers.     

Conformation of microtubule-bound paclitaxel determined by fluorescence spectroscopy and REDOR NMR

The conformation of microtubule-bound paclitaxel has been examined by fluorescence and solid-state NMR spectroscopy. A fluorescent derivative of paclitaxel, 3'-N-debenzoyl-3'-N-(m-aminobenzoyl)paclitaxel (N-AB-PT), was prepared by semisynthesis. No differences in the microtubule-promoting activity between N-AB-PT and paclitaxel were observed, demonstrating that addition of the amino group did not adversely affect the ligand-receptor association. The distance between the fluorophore N-AB-PT and the colchicine binding site on tubulin polymers was determined through time-resolved measurements of fluorescence resonance energy transfer to be 29 +/- 2 A. The absorption and emission spectra of N-AB-PT bound to microtubules and in various solvents were measured. A plot of the Stokes shift as a function of solvent polarity was highly unusual. The Stokes shift increased linearly with solvent polarity in protic solvents, which is expected due to the nature of the fluorophore. In aprotic solvents, however, the Stokes shift was invariant with solvent polarity, indicating that the fluorophore was somehow shielded from the effects of the solvent. These data are best explained by considering the solution-state conformational properties of paclitaxel. It is known that paclitaxel adopts different conformations depending on the nature of the solvent, and these fluorescence data are consistent with the molecule adopting a "hydrophobic collapsed" conformation in protic solvents and an "extended" conformation in aprotic solvents. The Stokes shift of microtubule-bound N-AB-PT was within the protic solvent region, demonstrating that microtubule-bound paclitaxel is in a hydrophobic collapsed conformation. Microtubule-bound paclitaxel was also investigated by solid-state NMR. Paclitaxel was labeled with (19)F at the para position of the C-2 benzoyl substituent and with (13)C and (15)N in the side chain. Distances between the fluorine and carbon nuclei were determined by REDOR. The distance between the fluorine and the 3'-amide carbonyl carbon was 9.8 +/- 0.5 A, and the distance between the fluorine atom and the 3'-methine carbon was 10. 3 +/- 0.5 A. These spectroscopic data were used in conjunction with molecular modeling to refine the microtubule-bound conformation of paclitaxel and to suggest an alternative orientation of the ligand within the paclitaxel binding site.     

Speckled microtubules improve tracking in motor-protein gliding assays

Gliding assays of motor proteins such as kinesin, dynein and myosin are commonly carried out with fluorescently labeled microtubules or filamentous actin. In this paper, we show that speckled microtubules (MTs), prepared by copolymerizing 98% unlabeled tubulin with 2% rhodamine-labeled tubulin, can be localized to +/-7.4 nm (24 measurements) in images acquired every 125 ms. If the speckled MTs move at about 800 nm s(-1), ten images are sufficient to determine their velocity to a precision of +/-6.8 nm s(-1) (6 microtubules, 24 measurements). This velocity precision is four-fold better than manual methods for measuring the gliding velocity of uniformly labeled MTs by end-point localization. The improved velocity precision will permit the determination of velocity-force curves when one, two and three kinesin motors pull a single load in vitro.     

Location and properties of the taxol binding center in microtubules: a picosecond laser study with fluorescent taxoids

The interaction of two bioactive, fluorescent analogues of the anticancer drug Taxol, Flutax1 [7-O-[N-(fluorescein-4'-carbonyl)-L-alanyl]taxol] and Flutax2 [7-O-[N-(2,7-difluorofluorescein-4'-carbonyl)-L-alanyl]taxol], with microtubules in solution has been studied with picosecond laser methods. As shown here, although a mixture of the fluorescein mono- and dianion species of Flutax1 is present in solution, the bound taxoid contains only the dianion form of the dye. This indicates strong electrostatic interactions at the microtubule lattice with the appending dye, most likely with charged residues of the M-loop of the beta-tubulin subunit. Moreover, analysis of the dynamic depolarization of microtubule-bound Flutax at low binding site occupancy was consistent with a protein active center with significant conformational flexibility. On the other hand, for microtubules fully saturated with the taxoid, a new, additional depolarizing process was observed, with relaxation times of 14 ns (Flutax1) and 8 ns (Flutax2), which is due to F?rster resonance energy homotransfer (FREHT) between neighboring dye molecules. Application of a detailed analysis of FREHT-induced depolarization in a circular array of dye molecules presented here yielded a separation between nearest-neighbor Flutax moieties of 40 +/- 5 A, for microtubules made up of between 12 and 14 protofilaments, a value that is only compatible with the Taxol binding site being located at the inner wall of the microtubule. The internal position of the drug molecular target as measured here is also consistent with other spectroscopic observations and confirms existing predictions based on microtubule structures modeled from high-resolution, electron density maps of alphabeta-tubulin.     

Recovery of tubulin functions after freeze-drying in the presence of trehalose

Microtubules represent cytoplasmic structures that are indispensable for the maintenance of cell morphology and motility generation. Due to their regular structural organization, microtubules have become of great interest for preparation of in vitro nanotransport systems. However, tubulin, the major building protein of microtubules, is a thermolabile protein and is usually stored at −80 °C to preserve its conformation and polymerization properties. Here we describe a novel method for freeze-drying of assembly-competent tubulin in the presence of a nonreducing sugar trehalose. Even after prolonged storage at ambient temperature, rehydrated tubulin is capable of binding antimitotic drugs and assembling to microtubules that bind microtubule-associated proteins in the usual way. Electron microscopy confirmed that rehydrated tubulin assembles into normal microtubules that are able to generate motility by interaction with the motor protein kinesin in a cell-free environment. Freeze-drying also preserved preformed microtubules. Rehydrated tubulin and microtubules can be used for preparation of diverse in vitro and in vivo assays as well as for preparation of bionanodevices.     

Biophysical characterization of the interactions of HTI-286 with tubulin heterodimer and microtubules

HTI-286 is a synthetic analogue of the natural product hemiasterlin and is a potent antimitotic agent. HTI-286 inhibits the proliferation of tumor cells during mitosis. The observed antimitotic activity is due to the binding of HTI-286 to tubulin. This report details the effects of HTI-286 on soluble tubulin and preassembled microtubules. HTI-286 binds tubulin monomer and oligomerizes it to an 18.5 S species corresponding to a discrete ring structure consisting of about 13 tubulin units as determined by sedimentation equilibrium analyses. The rate of formation of the oligomers is dependent on the concentration of HTI-286 and the time of incubation. Tubulin oligomers, specifically the 18.5 S species, form slowly. The interactions of HTI-286 with tubulin were studied by isothermal titration calorimetry. HTI-286 binds tubulin rapidly, and the initial association of HTI-286 with tubulin is enthalpically driven with a DeltaH value of -14 kcal/mol at 25 degrees C and a dissociation constant of ca. 100 nM. However, the accompanying tubulin oligomerization event does not produce measurable heats at 25 degrees C. The dissociation constant estimated from the changes in the intrinsic fluorescence of tubulin was found to be consistent with the calorimetric results. Both HTI-286 and hemiasterlin bind tubulin with nearly equal potency. However, the stability of the tubulin oligomers is not identical under size-exclusion column chromatographic conditions. The tubulin oligomers formed in the presence of HTI-286 dissociate on the column, while the corresponding oligomers formed in the presence of hemiasterlin are stable. Tubulin undergoes a change in the secondary structure in the presence of HTI-286, which is evidenced by changes in the circular dichroic absorption spectrum of tubulin. In contrast to the microtubule-stabilizing effects of paclitaxel, both HTI-286 and hemiasterlin depolymerize preassembled microtubules at micromolar concentrations.     

A fluorescent analog of colcemid, N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)-colcemid, as a probe for the colcemid-binding sites of tubulin and microtubules

The synthesis and biological testing of the fluorescent analog of colcemid, N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)-colcemid (NBD-colcemid), are here described. NBD-colcemid exhibited a visible absorption maximum at 465 nm and fluoresced in the range of 520-540 nm, highly in environments of low polarity, whereas only slightly in aqueous solution. The addition of NBD-colcemid to bovine brain tubulin was accompanied by a striking enhancement of fluorescence. The fluorescent titration study suggested a stoichiometric binding of NBD-colcemid to tubulin. Assembled microtubules were directly visualized after mixing with NBD-colcemid using a fluorescence microscope. NBD-colcemid reversibly disrupted the metaphase spindles of sea urchin eggs as well as unlabeled colcemid. However, even when the birefringence of spindles was mostly lost, self-quenching properties of the NBD fluorescence allowed tubulin and its oligomers aggregated in higher concentrations in eggs to be visualized under a fluorescence microscope. The results suggest a wide applicability of NBD-colcemid as a fluorescent probe for studying the interactions of colcemid with tubulin and microtubules, as well as for localizing other colcemid-binding structures within cells.     

CLIP-170/tubulin-curved oligomers coassemble at microtubule ends and promote rescues

BACKGROUND: CLIP-170 is a microtubule binding protein specifically located at microtubule plus ends, where it modulates their dynamic properties and their interactions with intracellular organelles. The mechanism by which CLIP-170 is targeted to microtubule ends remains unclear today, as well as its precise effect on microtubule dynamics. RESULTS: We used the N-terminal part of CLIP-170 (named H2), which contains the microtubule binding domains, to investigate how it modulates in vitro microtubule dynamics and structure. We found that H2 primarily promoted rescues (transitions from shrinkage to growth) of microtubules nucleated from pure tubulin and isolated centrosomes, and stimulated microtubule nucleation. Electron cryomicroscopy revealed that H2 induced the formation of tubulin rings in solution and curved oligomers at the extremities of microtubules in assembly conditions. CONCLUSIONS: These results suggest that CLIP-170 targets specifically at microtubule plus ends by copolymerizing with tubulin and modulates microtubule nucleation, polymerization, and rescues by the same basic mechanism with tubulin oligomers as intermediates.     

Microtubule dynamics in the chromosomal spindle fiber: analysis by fluorescence and high-resolution polarization microscopy

We describe preliminary results from two studies exploring the dynamics of microtubule assembly and organization within chromosomal spindle fibers. In the first study, we microinjected fluorescently labeled tubulin into mitotic PtK1 cells and measured fluorescence redistribution after photobleaching (FRAP) to determine the assembly dynamics of the microtubules within the chromosomal fibers in metaphase cells depleted of nonkinetochore microtubules by cooling to 23-24 degrees C. FRAP measurements showed that the tubulin throughout at least 72% of the microtubules within the chromosomal fibers exchanges with the cellular tubulin pool with a half-time of 77 sec. There was no observable poleward flux of subunits. If the assembly of the kinetochore microtubules is governed by dynamic instability, our results indicate that the half-life of microtubule attachment to the kinetochore is less than several min at 23-24 degrees C. In the second study, we used high-resolution polarization microscopy to observe microtubule dynamics during mitosis in newt lung epithelial cells. We obtained evidence from 150-nm-thick optical sections that microtubules throughout the spindle laterally associate for several sec into "rods" composed of a few microtubules. These transient lateral associations between microtubules appeared to produce the clustering of nonkinetochore and kinetochore microtubules into the chromosomal fibers. Our results indicate that the chromosomal fiber is a dynamic structure, because microtubule assembly is transient, lateral interactions between microtubules are transient, and the attachment of the kinetochores to microtubules may also be transient.