Application of flowcell technology for monitoring biofilm development and cellulose degradation in leachate and rumen systems

In this study, a flat plate flowcell was modified to provide a reactor system that could maintain anaerobic, cellulolytic biofilms while providing the data needed to carry out a chemical oxygen demand mass balance to determine the cellulose digestion rates. The results showed that biofilms could be observed to grow and develop on cellulose particle surfaces from both anaerobic digester leachate and rumen fluid inocula. The observations suggest that the architecture of rumen and leachate derived biofilms may be significantly different with rumen derived organisms forming stable, dense biofilms while the leachate derived organisms formed less tenacious surface attachments. This experiment has indicated the utility of flowcells in the study of anaerobic biofilms.     

Adhesion of Histoplasma capsulatum to pneumocytes and biofilm formation on an abiotic surface

The pathogenic fungus, Histoplasma capsulatum, causes the respiratory and systemic disease 'histoplasmosis'. This disease is primarily acquired via inhalation of aerosolized microconidia or hyphal fragments of H. capsulatum. Evolution of this respiratory disease depends on the ability of H. capsulatum yeasts to survive and replicate within alveolar macrophages. It is known that adhesion to host cells is the first step in colonization and biofilm formation. Some microorganisms become attached to biological and non-biological surfaces due to the formation of biofilms. Based on the importance of biofilms and their persistence on host tissues and cell surfaces, the present study was designed to investigate biofilm formation by H. capsulatum yeasts, as well as their ability to adhere to pneumocyte cells. H. capsulatum biofilm assays were performed in vitro using two different clinical strains of the fungus and biofilms were characterized using scanning electron microscopy. The biofilms were measured using a 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino)carbonyl]-2H-tetrazolium-hydroxide (XTT) reduction assay. The results showed that both the H. capsulatum strains tested were very efficient at adhering to host cells and forming biofilm. Therefore, this is a possible survival strategy adopted by this fungus.     

Enhanced benzaldehyde tolerance in Zymomonas mobilis biofilms and the potential of biofilm applications in fine-chemical production

Biotransformation plays an increasingly important role in the industrial production of fine chemicals due to its high product specificity and low energy requirement. One challenge in biotransformation is the toxicity of substrates and/or products to biocatalytic microorganisms and enzymes. Biofilms are known for their enhanced tolerance of hostile environments compared to planktonic free-living cells. Zymomonas mobilis was used in this study as a model organism to examine the potential of surface-associated biofilms for biotransformation of chemicals into value-added products. Z. mobilis formed a biofilm with a complex three-dimensional architecture comprised of microcolonies with an average thickness of 20 microm, interspersed with water channels. Microscopic analysis and metabolic activity studies revealed that Z. mobilis biofilm cells were more tolerant to the toxic substrate benzaldehyde than planktonic cells were. When exposed to 50 mM benzaldehyde for 1 h, biofilm cells exhibited an average of 45% residual metabolic activity, while planktonic cells were completely inactivated. Three hours of exposure to 30 mM benzaldehyde resulted in sixfold-higher residual metabolic activity in biofilm cells than in planktonic cells. Cells inactivated by benzaldehyde were evenly distributed throughout the biofilm, indicating that the resistance mechanism was different from mass transfer limitation. We also found that enhanced tolerance to benzaldehyde was not due to the conversion of benzaldehyde into less toxic compounds. In the presence of glucose, Z. mobilis biofilms in continuous cultures transformed 10 mM benzaldehyde into benzyl alcohol at a steady rate of 8.11 g (g dry weight)(-1) day(-1) with a 90% molar yield over a 45-h production period.     

Enhanced germicidal effects of pulsed UV‐LED irradiation on biofilms

Aims: The major objective of the study was to evaluate the enhanced germicidal effects of low‐frequency pulsed ultraviolet A (UVA)‐light‐emitting diode (LED) on biofilms. Methods and Results: The germicidal effects of UVA‐LED irradiation (365 nm, 0·28 mW cm^?2, in pulsed or continuous mode) on Candida albicans or Escherichia coli biofilms were evaluated by determining colony‐forming units. The morphological change of microbial cells in biofilms was observed using scanning electron microscopy. After 5‐min irradiation, over 90% of viable micro‐organisms in biofilms had been killed, and pulsed irradiation (1–1000 Hz) had significantly greater germicidal ability than continuous irradiation. Pulsed irradiation (100 Hz, 60 min) almost completely killed micro‐organisms in biofilm (>99·9%), and 20‐min irradiation greatly damaged both microbial species. Interestingly, few hyphae were found in irradiated Candida biofilms. Moreover, mannitol treatment, a scavenger of hydroxyl radicals (OH^?), significantly protected viable micro‐organisms in biofilms from UVA‐LED irradiation. Conclusions: The study demonstrated that pulsed UVA‐LED irradiation has a strong germicidal effect (maximum at 100 Hz, over 5‐min irradiation) and causes the disappearance of hyphal forms of Candida. Significance and Impact of the Study: This study can assist in developing a low‐frequency pulsed UVA‐LED system to be applied to pathogenic biofilms for disinfection.     

Biofilm induced tolerance towards antimicrobial peptides

Increased tolerance to antimicrobial agents is thought to be an important feature of microbes growing in biofilms. We address the question of how biofilm organization affects antibiotic susceptibility. We established Escherichia coli biofilms with differential structural organization due to the presence of IncF plasmids expressing altered forms of the transfer pili in two different biofilm model systems. The mature biofilms were subsequently treated with two antibiotics with different molecular targets, the peptide antibiotic colistin and the fluoroquinolone ciprofloxacin. The dynamics of microbial killing were monitored by viable count determination, and confocal laser microscopy. Strains forming structurally organized biofilms show an increased bacterial survival when challenged with colistin, compared to strains forming unstructured biofilms. The increased survival is due to genetically regulated tolerant subpopulation formation and not caused by a general biofilm property. No significant difference in survival was detected when the strains were challenged with ciprofloxacin. Our data show that biofilm formation confers increased colistin tolerance to cells within the biofilm structure, but the protection is conditional being dependent on the structural organization of the biofilm, and the induction of specific tolerance mechanisms.     

Structural studies of the Nudix GDP-mannose hydrolase from E. coli reveals a new motif for mannose recognition

The Nudix hydrolase superfamily, characterized by the presence of the signature sequence GX(5)EX(7)REUXEEXGU (where U is I, L, or V), is a well-studied family in which relations have been established between primary sequence and substrate specificity for many members. For example, enzymes that hydrolyze the diphosphate linkage of ADP-ribose are characterized by having a proline 15 amino acids C-terminal of the Nudix signature sequence. GDPMK is a Nudix enzyme that conserves this characteristic proline but uses GDP-mannose as the preferred substrate. By investigating the structure of the GDPMK alone, bound to magnesium, and bound to substrate, the structural basis for this divergent substrate specificity and a new rule was identified by which ADP-ribose pyrophosphatases can be distinguished from purine-DP-mannose pyrophosphatases from primary sequence alone. Kinetic and mutagenesis studies showed that GDPMK hydrolysis does not rely on a single glutamate as the catalytic base. Instead, catalysis is dependent on residues that coordinate the magnesium ions and residues that position the substrate properly for catalysis. GDPMK was thought to play a role in biofilm formation because of its upregulation in response to RcsC signaling; however, GDPMK knockout strains show no defect in their capacity of forming biofilms.     

Self-immobilized recombinant Acetobacter xylinum for biotransformation

Biofilms have been successfully applied for biotransformation for decades, especially in the area of bioremediation due to the feature of harsh reaction condition resistance. Acetobacter xylinum is known for its cellulose pellicle forming capability. Like biofilm, A. xylinum cells are immobilized by simultaneously produced cellulose nanofibers in the pellicle. A recombinant A. xylinum was constructed with the expectation that the cells could be self-immobilized and achieve a desired and stable biotransformation. d-Amino acid oxidase (DAAO) of Rhodosporidium toruloides was used as the model enzyme to be expressed in the recombinant A. xylinum. The constructed recombinant A. xylinum not only successfully produced DAAO activity but also self-immobilized by cellulose nanofibers in both the static and shaken culture. Although self-immobilized cells demonstrated a DAAO activity approximately 10% of the cell crude extract activity, it provided the benefits of improved thermal stability, operational stability, and easy retrieval for repeated use.     

Emulsifier production and microscopical study of emulsions and biofilms formed by the hydrocarbon-utilizing bacteria Acinetobacter calcoaceticus MM5

A bacterial strain was isolated from a sample of contaminated heating oil and identified as a strain of Acinetobacter calcoaceticus, named MM5. The bacterial isolate was able to grow on petroleum derivatives and brought about an emulsification of those compounds. A bioemulsifier was extracted from the culture medium of MM5 strain and partially characterized. This compound was able to emulsify petroleum fuels and both aliphatic and aromatic pure hydrocarbons and was stable over a wide range of temperatures. Studies developed by light, scanning electron and transmission electron microscopy showed that, during the growth on petroleum derivatives, the microorganisms were orientated on the surface of drops enclosed in a skin or membranous polymer produced by the bacteria. These droplets may represent the hydrocarbon/water emulsion of the liquid culture. The growth of A. calcoaceticus MM5 on media containing both hydrocarbon and water-soluble substrates as carbon sources also results in the formation of a film, consisting of amorphous and membranous layers. The bacteria were connected to the biofilm and showed intercellular contacts through cell-surface appendages, forming a complex network. The importance of the biofilms for bacterial adhesion to oil droplets and for its nourishment is discussed.     

Incorporation of secretory immunoglobulin A into biofilms can decrease their resistance to ciprofloxacin

Extracellular matrices utilized by biofilms growing on inert surfaces are generally produced entirely by the bacteria growing within those biofilms, whereas symbiotic (mutualistic) biofilms growing in or on a wide range of plants and animals utilize host-derived macromolecules, such as mucoid substances, as components of their extracellular matrix. Incorporation of host-derived molecules may have a profound effect on the resistance to antibiotics of symbiotic biofilms, which may have important implications for medicine and biology. As an initial probe of the potential effects of host-derived molecules in the extracellular matrix on the sensitivity of biofilms to antibiotics, an in vitro model was used to evaluate the effects of ciprofloxacin on biofilms grown in the presence and absence of SIgA, a host-derived glycoprotein associated with biofilms in the mammalian gut. In five out of six strains of Escherichia coli tested, the incorporation of SIgA into the biofilms apparently reduced the resistance of the bacteria to ciprofloxacin. On the other hand, SIgA generally increased the resistance of planktonic bacteria to ciprofloxacin, perhaps due in part to the SIgA-mediated aggregation of the bacteria. These findings suggest that incorporation of host-derived molecules into the extracellular matrix of symbiotic biofilms might profoundly alter the properties of those biofilms, including the resistance of those biofilms to antibiotics.     

Prophage spontaneous activation promotes DNA release enhancing biofilm formation in Streptococcus pneumoniae

Streptococcus pneumoniae (pneumococcus) is able to form biofilms in vivo and previous studies propose that pneumococcal biofilms play a relevant role both in colonization and infection. Additionally, pneumococci recovered from human infections are characterized by a high prevalence of lysogenic bacteriophages (phages) residing quiescently in their host chromosome. We investigated a possible link between lysogeny and biofilm formation. Considering that extracellular DNA (eDNA) is a key factor in the biofilm matrix, we reasoned that prophage spontaneous activation with the consequent bacterial host lysis could provide a source of eDNA, enhancing pneumococcal biofilm development. Monitoring biofilm growth of lysogenic and non-lysogenic pneumococcal strains indicated that phage-infected bacteria are more proficient at forming biofilms, that is their biofilms are characterized by a higher biomass and cell viability. The presence of phage particles throughout the lysogenic strains biofilm development implicated prophage spontaneous induction in this effect. Analysis of lysogens deficient for phage lysin and the bacterial major autolysin revealed that the absence of either lytic activity impaired biofilm development and the addition of DNA restored the ability of mutant strains to form robust biofilms. These findings establish that limited phage-mediated host lysis of a fraction of the bacterial population, due to spontaneous phage induction, constitutes an important source of eDNA for the S. pneumoniae biofilm matrix and that this localized release of eDNA favors biofilm formation by the remaining bacterial population.     

Enhanced Benzaldehyde Tolerance in Zymomonas mobilis Biofilms and the Potential of Biofilm Applications in Fine-Chemical Production

Biotransformation plays an increasingly important role in the industrial production of fine chemicals due to its high product specificity and low energy requirement. One challenge in biotransformation is the toxicity of substrates and/or products to biocatalytic microorganisms and enzymes. Biofilms are known for their enhanced tolerance of hostile environments compared to planktonic free-living cells. Zymomonas mobilis was used in this study as a model organism to examine the potential of surface-associated biofilms for biotransformation of chemicals into value-added products. Z. mobilis formed a biofilm with a complex three-dimensional architecture comprised of microcolonies with an average thickness of 20 μm, interspersed with water channels. Microscopic analysis and metabolic activity studies revealed that Z. mobilis biofilm cells were more tolerant to the toxic substrate benzaldehyde than planktonic cells were. When exposed to 50 mM benzaldehyde for 1 h, biofilm cells exhibited an average of 45% residual metabolic activity, while planktonic cells were completely inactivated. Three hours of exposure to 30 mM benzaldehyde resulted in sixfold-higher residual metabolic activity in biofilm cells than in planktonic cells. Cells inactivated by benzaldehyde were evenly distributed throughout the biofilm, indicating that the resistance mechanism was different from mass transfer limitation. We also found that enhanced tolerance to benzaldehyde was not due to the conversion of benzaldehyde into less toxic compounds. In the presence of glucose, Z. mobilis biofilms in continuous cultures transformed 10 mM benzaldehyde into benzyl alcohol at a steady rate of 8.11 g (g dry weight)⁻¹ day⁻¹ with a 90% molar yield over a 45-h production period.     

Modeling of the biotransformation of crotonobetaine into L-(-)-carnitine by Escherichia coli strains

A simple unstructured model, which includes carbon source as the limiting and essential substrate and oxygen as an enhancing substrate for cell growth, has been implemented to depict cell population evolution of two Escherichia coli strains and the expression of their trimethylammonium metabolism in batch and continuous reactors. Although the model is applied to represent the trans-crotonobetaine to L-(-)-carnitine biotransformation, it is also useful for understanding the complete metabolic flow of trimethylammonium compounds in E. coli. Cell growth and biotransformation were studied in both anaerobic and aerobic conditions. For this reason we derived equations to modify the specific growth rate, mu, and the cell yield on the carbon source (glycerol), Y(xg), as oxygen increased the rate of growth. Inhibition functions representing an excess of the glycerol and oxygen were included to depict cell evolution during extreme conditions. As a result, the model fitted experimental data for various growth conditions, including different carbon source concentrations, initial oxygen levels, and the existence of a certain degree of cell death. Moreover, the production of enzymes involved within the E. coli trimethylammonium metabolism and related to trans-crotonobetaine biotransformation was also modeled as a function of both the cell and oxygen concentrations within the system. The model describes all the activities of the different enzymes within the transformed and wild strains, able to produce L-(-)-carnitine from trans-crotonobetaine under both anaerobic and aerobic conditions. Crotonobetaine reductase inhibition by either oxygen or the addition of fumarate as well as its non-reversible catalytic action was taken into consideration. The proposed model was useful for describing the whole set of variables under both growing and resting conditions. Both E. coli strains within membrane high-density reactors were well represented by the model as results matched the experimental data.     

Soil biotransformation of thiodiglycol, the hydrolysis product of mustard gas: understanding the factors governing remediation of mustard gas contaminated soil

Thiodiglycol (TDG) is both the precursor for chemical synthesis of mustard gas and the product of mustard gas hydrolysis. TDG can also react with intermediates of mustard gas degradation to form more toxic and/or persistent aggregates, or reverse the pathway of mustard gas degradation. The persistence of TDG have been observed in soils and in the groundwater at sites contaminated by mustard gas 60 years ago. The biotransformation of TDG has been demonstrated in three soils not previously exposed to the chemical. TDG biotransformation occurred via the oxidative pathway with an optimum rate at pH 8.25. In contrast with bacteria isolated from historically contaminated soil, which could degrade TDG individually, a consortium of three bacterial strains isolated from the soil never contaminated by mustard gas was able to grow on TDG in minimal medium and in hydrolysate derived from an historical mustard gas bomb. Exposure to TDG had little impacts on the soil microbial physiology or on community structure. Therefore, the persistency of TDG in soils historically contaminated by mustard gas might be attributed to the toxicity of mustard gas to microorganisms and the impact to soil chemistry during the hydrolysis. TDG biodegradation may form part of a remediation strategy for mustard gas contaminated sites, and may be enhanced by pH adjustment and aeration.     

Biofilm formation by ica-positive and ica-negative strains of Staphylococcus epidermidis in vitro

Staphylococcus epidermidis is a clinically important opportunistic pathogen that forms biofilm infections on nearly all types of indwelling medical devices. The biofilm forming capability of S. epidermidis has been linked to the presence of the ica operon in the genome, and the amount of biofilm formation measured by the crystal violet (CV) adherence assay. Six S. epidermidis strains were characterized for their ica status using PCR, and their biofilm forming ability over 6 days, using the CV assay and a flow cell system. Ica-negative strains characterized as ‘negative for biofilm formation’ based on the CV assay were demonstrated to form strongly attached biofilms after 6 days. However, the biofilms were not as extensive as the ica-positive strains. It was concluded that ica is not required for biofilm formation, nor is the 24-h CV assay generalizable for predicting the 6-day biofilm-forming ability for all S. epidermidis strains.     

Characterization of Phenotypic Switching in <Emphasis Type="Italic">Cryptococcus neoformans</Emphasis> Biofilms

Cryptococcus neoformans is an encapsulated yeast-like fungus that is a relatively frequent cause of meningoencephalitis in immunocompromised patients and also occasionally causes disease in apparently healthy individuals. This fungus collectively forms biofilms on polystyrene plates and medical devices, whereas individually can undergo phenotypic switching. Both events have profound consequences in the establishment of fungal infection and are associated with persistent infection due to increase resistance to antimicrobial therapy. In this study, we characterized switch phenotypes in C. neoformans biofilms. Smooth, mucoid, and wrinkled switch phenotypes of various switching C. neoformans strains were examined for their adhering and biofilm-forming ability on 96-well plates using cell counts and 2,3-bis (2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium hydroxide (XTT) reduction assay, respectively. Both assays showed that C. neoformans strains with the parent smooth phenotype adhered and formed stronger biofilms than their mucoid and wrinkled counterparts. Furthermore, the phenotypic switching frequencies of the individual colony types grown in biofilms or as planktonic cells were investigated. For the parent smooth variant of most strains, we found enhanced phenotypic switching in cryptococcal biofilms when compared to switching rates of planktonic cells. In contrast, the back-switching rate of mucoid to smooth variant was significantly higher in planktonic cells of seven strains of C. neoformans strains. These results suggested that phenotypic switching can occur in cryptococcal biofilms and extend our understanding of the relationship of both phenomena.     

Putative surface proteins encoded within a novel transferable locus confer a high-biofilm phenotype to Enterococcus faecalis

Enterococci are opportunistic pathogens and among the leading causes of nosocomial infections. Enterococcus faecalis, the dominant species among infection-derived isolates, has recently been recognized as capable of forming biofilms on abiotic surfaces in vitro as well as on indwelling medical devices. A few bacterial factors known to contribute to biofilm formation in E. faecalis have been characterized. To identify additional factors which may be important to this process, we utilized a Tn917-based insertional mutagenesis strategy to generate a mutant bank in a high-biofilm-forming E. faecalis strain, E99. The resulting mutant bank was screened for mutants exhibiting a significantly reduced ability to form biofilms. One mutant, P101D12, which showed greater than 70% reduction in its ability to form biofilms compared to the wild-type parent, was further characterized. The single Tn917 insertion in P101D12 was mapped to a gene, bee-2, encoding a probable cell wall-anchored protein. Sequence information for the region flanking bee-2 revealed that this gene was a member of a locus (termed the bee locus for biofilm enhancer in enterococcus) comprised of five genes encoding three putative cell wall-anchored proteins and two probable sortases. Contour-clamped homogeneous electric field gel and Southern hybridization analyses suggested that the bee locus is likely harbored on a large conjugative plasmid. Filter mating assays using wild-type E99 or mutant P101D12 as a donor confirmed that the bee locus could transfer conjugally at high frequency to recipient E. faecalis strains. This represents the first instance of the identification of a mobile genetic element conferring biofilm-forming property in E. faecalis.     

An extractive membrane biofilm reactor as alternative technology for the treatment of methyl tert‐butyl ether contaminated water

Among the strategies developed for contaminated groundwater bioremediation, those based on the use of bacteria adhering to inert supports and establishing biofilms have gained great importance in this field. Extractive membrane biofilm reactor (EMBFR) technology offers productive solutions for the removal of volatile and semi‐volatile compounds. EMBFR technology is based on the use of extractive semipermeable membranes through which contaminants migrate to the biological compartment in which microorganisms with pollutant biotransformation and/or mineralization capacities can grow, forming an active biofilm on the membrane surface. The objective of this study was to assess the use of three bacterial strains (Paenibacillus sp. SH7 CECT 8558, Agrobacterium sp. MS2 CECT 8557, and Rhodococcus ruber EE6 CECT 8612), as inoculum in a lab‐scale EMBFR running for 28 days under aerobic conditions to eliminate methyl tert‐butyl ether (MTBE) from water samples. Three different hydraulic retention times (1, 6, and 12 h) were employed. MTBE degradation values were determined daily by a gas GC‐MS technique, as well as suspended bacterial growth. The biofilm established by the bacterial strains on the semipermeable membrane was detected by Field‐Emission Scanning Electron Microscopy (FESEM) at the end of each experiment. The acute toxicity of the treated effluents and biomedium was determined by Microtox^© assay (EC₅₀).The results achieved from the MTBE degradation, biofilm formation, and toxicity analysis indicated that bacterial strains MS2 and EE6 were the best options as selective inoculum, although further research is needed, particularly with regard to their possible use as a mixed culture. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1238–1245, 2016     

Construction and analysis of fractional multifactorial designs to study attachment strength and transfer of Listeria monocytogenes from pure or mixed biofilms after contact with a solid model food

The aim of this study was to establish which of seven factors influence the adhesion strength and hence bacterial transfer between biofilms containing Listeria monocytogenes (pure and two-species biofilms) and tryptone soya agar (TSA) as a solid organic surface. The two-species biofilms were made of L. monocytogenes and one of the following species of bacteria: the nonpathogenic organisms Kocuria varians, Pseudomonas fluorescens, and Staphylococcus sciuri and CCL 63, an unidentified gram-negative bacterium isolated from the processing plant environment. We used biofilms prepared under conditions simulating open surfaces in meat-processing sites. The biofilm's adhesion strength and population were evaluated by making 12 contacts on a given whole biofilm (4.5 cm(2)), using a new slice of a sterilized TSA cylinder for each contact, and plotting the logarithm CFU . cm(-2) detached by each contact against the contact number. Three types of detachment kinetics were observed: biphasic kinetics, where the first slope may be either positive or negative, and monophasic kinetics. The bacteria that resisted a chlorinated alkaline product and a glutaraldehyde- and quaternary ammonium-based disinfectant had greater adhesion strengths than those determined for untreated biofilms. One of the four non-Listeria strains studied, Kocuria varians CCL 56, favored both the attachment and detachment of L. monocytogenes. The stainless steel had smaller bacterial populations than polymer materials, and non-Listeria bacteria adhered to it less strongly. Our results helped to evaluate measures aimed at controlling the immediate risk, linked to the presence of a large number of CFU in a foodstuff, and the delayed risk, linked to the persistence of L. monocytogenes and the occurrence of slightly contaminated foods that may become dangerous if L. monocytogenes multiplies during storage. Cleaning and disinfection reduce the immediate risk, while reducing the delayed risk should be achieved by lowering the adhesion strength, which the sanitizers used here cannot do at low concentrations.     

Use of molecularly imprinted polymers in a biotransformation process.

Molecularly imprinted polymers are highly stable and can be sterilised, making them ideal for use in biotransformation process. In this communication, we describe a novel application of molecularly imprinted polymers in an enzymatic reaction. The enzymatic condensation of Z-L-aspartic acid with L-phenylalanine methyl ester to give Z-L-Asp-L-Phe-OMe (Z-aspartame) was chosen as a model system to evaluate the applicability of using molecularly imprinted polymers to facilitate product formation. When the product-imprinted polymer is present, a considerable increase (40%) in product yield is obtained. Besides their use to enhance product yields, as demonstrated here, we suggest that imprinted polymers may also find use in the continuous removal of toxic compounds during biochemical reactions.     

Carbohydrate-containing components of biofilms produced in vitro by some staphylococcal strains related to orthopaedic prosthesis infections

The capacity of coagulase-negative staphylococci to colonize implanted medical devices is generally attributed to their ability to produce biofilms. Biofilm of the model strain of Staphylococcus epidermidis RP62A was shown to contain two carbohydrate-containing moieties, a linear poly-beta-(1-->6)-N-acetyl-D-glucosamine (PNAG) and teichoic acid. In the present study, we investigated several biofilm-producing staphylococci isolated from infected orthopaedic implants and characterized the composition of the laboratory-grown biofilms using chemical analysis and 1H nuclear magnetic resonance spectroscopy. Extracellular teichoic acid was produced by all strains studied. Some of the clinical strains were shown to produce biofilms with compositions similar to that of the model strain, containing a varying amount of PNAG. The chemical structure of PNAG of the clinical strains was similar to that previously described for the model strains S. epidermidis RP62A and Staphylococcus aureus MN8m, differing only in the amount of charged groups. Biofilms of the strains producing a substantial amount of PNAG were detached by dispersin B, a PNAG-degrading enzyme, while being unsusceptible to proteinase K treatment. On the other hand, some strains produced biofilms without any detectable amount of PNAG. The biofilms of these strains were dispersed by proteinase K, but not by dispersin B.