Efficient immobilization of lipases by entrapment in hydrophobic sol-gel materials

The commercial application of lipases as biocatalysts for organic synthesis requires simple but efficient methods to immobilize the enzyme, yielding highly stable and active biocatalysts which are easy to recover. In this study, we present a novel method to achieve lipase immobilization by entrapment in chemically inert hydrophobic silica gels which are prepared by hydrolysis of alkyl-substituted silanes in the presence of the enzyme. A typical immobilization procedure uses: an aqueous solution of lipase; sodium fluoride as a catalyst; and additives like polyvinyl alcohol or proteins and alkoxysilane derivatives like RSi-(OMe)(3) with R = alkyl, aryl, or alkoxy as gel precursors. The effect of various immobilization parameters like stoichiometric ratio of water, silane, type and amount of additive, type and amount of catalyst, and type of silane has been carefully studied. The new method is applicable for a wide variety of lipases, yielding immobilized lipases with esterification activities enhanced by a factor of up to 88, compared to the commercial enzyme powders under identical conditions. Studies on the stability of sol-gel immobilized lipases under reaction conditions or storage (dry, in aqueous or organic medium) revealed an excellent retention of enzymatic activity. The possible reasons for the increased enzyme activities are discussed. (c) 1996 John Wiley & Sons, Inc.     

AFM nanometer surface morphological study of in situ electropolymerized neutral red redox mediator oxysilane sol-gel encapsulated glucose oxidase electrochemical biosensors

Four different silica sol-gel films: methyltrimethoxysilane (MTMOS), tetraethoxysilane (TEOS), 3-aminopropyltriethoxysilane (APTOS) and 3-glycidoxypropyl-trimethoxysilane (GOPMOS) assembled onto highly oriented pyrolytic graphite (HOPG) were characterized using atomic force microscopy (AFM), due to their use in the development of glucose biosensors. The chemical structure of the oxysilane precursor and the composition of the sol-gel mixture both influenced the roughness, the size and the distribution of pores in the sol-gel films, which is relevant for enzyme encapsulation. The GOPMOS sol-gel film fulfils all the morphological characteristics required for good encapsulation of the enzyme, due to a smooth topography with very dense and uniform distribution of only small, 50nm diameter, pores at the surface. APTOS and MTMOS sol-gel films developed small pores together with large ones of 300-400nm that allow the leakage of enzymes, while the TEOS film formed a rough and incomplete network on the electrode, less suitable for enzyme immobilisation. GOPMOS sol-gel film with encapsulated glucose oxidase and poly(neutral red) redox mediator, prepared by in situ electropolymerization, were also morphologically characterized by AFM. The AFM results explain the variation of the stability in time, sensitivity and limit of detection obtained with different oxysilane sol-gel encapsulated glucose oxidase biosensors with redox mediator.     

Enzyme immobilization on electrospun polymer nanofibers: An overview

Enzyme immobilization has attracted continuous attention in the fields of fine chemistry, biomedicine, and biosensor. The performance of immobilized enzyme largely depends on the structure of supports. Nanostructured supports are believed to be able to retain the catalytic activity as well as ensure the immobilization efficiency of enzyme to a high extent. Electrospinning provides a simple and versatile method to fabricate nanofibrous supports. Compared with other nanostructured supports (e.g. mesoporous silica, nanoparticles), nanofibrous supports show many advantages for their high porosity and interconnectivity. This review mainly discusses the recent advances in using nanofibers as hosts for enzyme immobilization by two different methods, surface attachment and encapsulation. Surface attachment refers to physical adsorption or covalent attachment of enzymes on pristine or modified nanofibrous supports, and encapsulation means electrospinning a mixture of enzyme and polymer. We make a detailed comparison between these two immobilization approaches and highlight their distinct characteristics. The prospective applications of enzyme immobilized electrospun nanofibers in the development of biosensors, biofuel cells and biocatalysts are also discussed.     

Use of fluorescence to monitor the incorporation of horseradish peroxidase into a sol-gel derived medium

The solvatochromic dye nile red has been employed to monitor the incorporation of an enzyme (horseradish peroxidase) into a sol-gel derived medium. The fluorescence spectrum of the dye, when incorporated into the enzyme, was analysed as the sum of Gaussian component spectra and relative changes between these component spectra were monitored upon encapsulation of the dye-enzyme system within the host matrix. Activity of the confined enzyme was verified and the effect of temperature was also investigated, through the examination of nile red fluorescence in the sol-gel derived matrix, where a stabilising effect was noted.     

A reagent less fluorescent sol-gel biosensor for uric acid detection in biological fluids

The simultaneous encapsulation of a coupled uricase-peroxidase system and amplex red in a sol-gel matrix allows one to obtain a reagent-less and ready-to-use fluorescent biosensor for the accurate detection of uric acid in highly diluted biological fluids. The detection limit of the prepared biosensor was found to be 20 nM and was linear up to 1 microM. The high sensitivity found for the biosensor permitted a reliable determination of uric acid concentrations in the presence of interfering species (e.g., ascorbic acid) just by sample dilution (up to 50000 for urine and 10000 for serum and blood). The sol-gel encapsulation preserved the hierarchy of the enzyme activity as demonstrated by the performance of the fluorescent biosensor.     

Integrating enzyme immobilization and protein engineering: An alternative path for the development of novel and improved industrial biocatalysts

Enzyme immobilization often achieves reusable biocatalysts with improved operational stability and solvent resistance. However, these modifications are generally associated with a decrease in activity or detrimental modifications in catalytic properties. On the other hand, protein engineering aims to generate enzymes with increased performance at specific conditions by means of genetic manipulation, directed evolution and rational design. However, the achieved biocatalysts are generally generated as soluble enzymes, ?thus not reusable- and their performance under real operational conditions is uncertain.Combined protein engineering and enzyme immobilization approaches have been employed as parallel or consecutive strategies for improving an enzyme of interest. Recent reports show efforts on simultaneously improving both enzymatic and immobilization components through genetic modification of enzymes and optimizing binding chemistry for site-specific and oriented immobilization. Nonetheless, enzyme engineering and immobilization are usually performed as separate workflows to achieve improved biocatalysts.In this review, we summarize and discuss recent research aiming to integrate enzyme immobilization and protein engineering and propose strategies to further converge protein engineering and enzyme immobilization efforts into a novel “immobilized biocatalyst engineering” research field. We believe that through the integration of both enzyme engineering and enzyme immobilization strategies, novel biocatalysts can be obtained, not only as the sum of independently improved intrinsic and operational properties of enzymes, but ultimately tailored specifically for increased performance as immobilized biocatalysts, potentially paving the way for a qualitative jump in the development of efficient, stable biocatalysts with greater real-world potential in challenging bioprocess applications.     

Sol-gel trapping of functional intermediates of hemoglobin: geminate and bimolecular recombination studies

The encapsulation of proteins in porous sol-gels is a promising technique for generating, trapping, and probing functionally significant nonequilibrium protein species. An essential step needed in the pursuit of that goal is establishing the degree to which the sol-gel limits conformational change upon adding or removing substrates. In the present study, geminate recombination and solvent phase bimolecular recombination of CO to human adult hemoglobin (HbA) are used as sensitive probes of the degree of conformational constraint within the sol-gel. Two forms of CO saturated encapsulated HbA are generated. In one case, designated [COHbA], the equilibrium form of COHbA is directly encapsulated. In the second case, designated as [deoxyHbA] + CO, the equilibrium form of deoxyHbA is encapsulated and only after the sample has aged is CO introduced to the HbA through the porous sol-gel matrix. Three different preparative protocols are used to generate the sol-gels for each of the two forms of encapsulated COHbA. The kinetic traces obtained from these encapsulated samples allow for an easy evaluation of the extent to which the sol-gel is locking in the initial tertiary/quaternary structure. The results show that the sol-gel encapsulated samples can be used with pulsed laser sources and that one of the tested encapsulation protocols is far superior with respect to conformational locking. This protocol is used to trap and probe nonequilibrium forms such as the liganded T state of HbA, a species whose properties are needed to fully explore allostery in HbA.     

Sol-gel encapsulation of lactate dehydrogenase for optical sensing of L-lactate

Sol-gel encapsulation of lactate dehydrogenase and its cofactor can be employed as a disposable sensor for L-lactate. The sensor utilized the changes in absorbance or fluorescence from the reduced cofactor nicotinamide adenine dinucleotide (NADH) upon exposure to L-lactate. Although, problems such as diminished enzymatic activity and/or leaching of enzyme from the sol-gel matrix occurred, the sol-gel process is sufficiently mild to permit retention of enzymatic activity. The apparent activity of LDH in the sensor is at least 10% of that of the dissolved enzyme. The sensor has a linear dynamic range over the normal physiological L-lactate level and has a long-term storage stability of at least 3 weeks.     

Fluorescence detection of enzymatic activity within a liposome based nano-biosensor

The encapsulation of enzymes in microenvironments and especially in liposomes, has proven to greatly improve enzyme stabilization against unfolding, denaturation and dilution effects. Combining this stabilization effect, with the fact that liposomes are optically translucent, we have designed nano-sized spherical biosensors. In this work liposome-based biosensors are prepared by encapsulating the enzyme acetylcholinesterase (AChE) in L-a phosphatidylcholine liposomes resulting in spherical optical biosensors with an average diameter of 300+/-4 nm. Porins are embedded into the lipid membrane, allowing for the free substrate transport, but not that of the enzyme due to size limitations. The enzyme activity within the liposome is monitored using pyranine, a fluorescent pH indicator. The response of the liposome biosensor to the substrate acetylthiocholine chloride is relatively fast and reproducible, while the system is stable as has been shown by immobilization within sol-gel.     

Porous zirconia: a new support material for enzyme immobilization

Four different proteases (trypsin, chymotrypsin, papain and pepsin) were covalently attached to the surface of a new type of porous zirconia, as well as a conventional porous silica, activated with 3-isothiocyanatopropyltriethoxy silane (NCS-silane). The immobilization efficiency onto the porous zirconia material was evaluated in terms of the amount of enzyme attached to the particles and from the biological activity remaining after the immobilization step. The results were compared with the corresponding experiments with a porous silica of similar surface area/g support material. In addition, the storage stability of the modified zirconia and silica biocatalysts were evaluated. These results indicated that specific immobilized enzyme biocatalysts can be achieved with this new zirconia support material which exhibits different properties to those observed with the more conventional silica-based materials. Moreover, the results with the enzyme-zirconia biocatalysts also indicate different characteristics when compared with data for the same enzymes immobilized under similar buffer conditions to organic support materials as previously described by various other investigators. The advantages of zirconia-based immobilized enzyme biocatalysts in terms of their density and chemical robustness are also described relative to other alternative support materials currently in use.     

Immobilization of cells with nitrilase activity from a thermophilic bacterial strain

Cells of the moderately thermophilic Bacillus sp. UG-5B strain, producing nitrilase (EC3.5.5.1), which converts nitriles directly to the corresponding acid and ammonia, were immobilized using different types of matrices and techniques. A variety of sol-gel silica hybrids were tested for entrapment and adsorption of bacterial cells as well as chemical binding on polysulphone membranes. Activation of the matrix surface with formaldehyde led to an increase in immobilization efficiency and operational stability of the biocatalysts. Among the supports screened, membranes gave the best results for enzyme activity and especially operational stability, with retention of 100% activity after eight reaction cycles.     

Selective immobilization of Bacillus subtilis lipase A from cell culture supernatant: Improving catalytic performance and thermal resistance

Bacillus subtilis lipase A (BSLA) has been extensively studied through protein engineering; however, its immobilization and behavior as an insoluble biocatalyst have not been extensively explored. In this work, for the first time, a direct immobilization of recombinant BSLA from microbial culture supernatant was reported, using chemically modified porous with different electrostatic, hydrophobic, hydrophilic, and hydrophilic−hydrophobic enzyme-support interactions. The resulting biocatalysts were evaluated based on their immobilization kinetics, activity expression (pH 7.4), thermal stability (50 °C), solvent resistance and substrate preference. Biocatalysts obtained using glyoxyl silica support resulted in the selective immobilization of BSLA, resulting in an activity recovery of 50 % and an outstanding aqueous stabilization factor of 436, and 9.5 in isopropyl alcohol, compared to the free enzyme. This selective immobilization methodology of BSLA allows to efficiently generate immobilized biocatalysts, thus avoiding laborious purification steps from cell culture supernatant, which is usually a limiting step when large amounts of enzyme variants or candidates are assessed as immobilized biocatalysts. Direct enzyme immobilization from cell supernatant provides an interesting tool which can be used to facilitate the development and assessment of immobilized biocatalysts from engineered enzyme variants and mutant libraries, especially in harsh conditions, such as high temperatures or non-aqueous solvents, or against non-water-soluble substrates. Furthermore, selective immobilization approaches from cell culture supernatant or clarified lysates could help bridging the gap between protein engineering and enzyme immobilization, allowing for the implementation of immobilization steps in high throughput enzyme screening platforms for their potential use in directed evolution campaigns.     

Engineered whole-cell biocatalyst-based detoxification and detection of neurotoxic organophosphate compounds

The development of efficient tools is required for the eco-friendly detoxification and effective detection of neurotoxic organophosphates (OPs). Although enzymes have received significant attention as biocatalysts because of their high specific activity, the uneconomic and labor-intensive processes of enzyme production and purification make their broad use in practical applications difficult. Because whole-cell systems offer several advantages compared with free enzymes, including high stability, a reduced purification requirement, and low preparation cost, they have been suggested as promising biocatalysts for the detoxification and detection of OPs. To develop efficient whole-cell biocatalysts with enhanced activity and a broad spectrum of substrate specificity, several factors have been considered, namely the selected strains, the chosen OP-hydrolyzing enzymes, where enzymes are localized in a cell, and which enhancer will assist the expression, function, and folding of the enzyme. In this article, we review the current investigative progress in the development of engineered whole-cell biocatalysts with excellent OP-hydrolyzing activity, a broad spectrum of substrate specificity, and outstanding stability for the detoxification and detection of OPs.     

Enantioselective biocatalysis optimized by directed evolution

Directed evolution methods are now widely used for the optimization of diverse enzyme properties, which include biotechnologically relevant characteristics like stability, regioselectivity and, in particular, enantioselectivity. In principle, three different approaches are followed to optimize enantioselective reactions: the development of whole-cell biocatalysts through the creation of designer organisms; the optimization of enzymes with existing enantioselectivity for process conditions; and the evolution of novel enantioselective biocatalysts starting from non-selective wild-type enzymes.     

Activity and stability comparison of immobilized NADH oxidase on multi-walled carbon nanotubes,carbon nanospheres,and single-walled carbon nanotubes

Nanomaterials have been studied widely as the supporting materials for enzyme immobilization because in theory, they can provide low diffusion resistance and high surface/volume ratio. Common immobilization methods, such as physical adsorption, covalent binding, crosslinking, and encapsulation, often cause problems in enzyme leaching, 3D structure change and strong mass transfer resistance. We have previously demonstrated a site-specific enzyme immobilization method, which is based on the specific interaction between a His-tagged enzyme and functionalized single-walled carbon nanotubes (SWCNTs), that can overcome the foresaid constraints. In this work, we broadened the use of this immobilization approach by applying it on other nanomaterials, including multi-walled carbon nanotubes and carbon nanospheres. Both supporting materials were modified with N_α,N_α-bis(carboxymethyl)-l-lysine hydrate prior to enzyme immobilization. The resulting nanomaterial–enzyme conjugates could maintain 78–87% of the native enzyme activity and showed significantly better stability than the free enzyme. When compared with the SWCNT–enzyme conjugate, we found that the size variance among these supporting nanomaterials may affect factors such as surface curvature, surface coverage and particle mobility, which in turn results in differences in the activity and stability among these immobilized biocatalysts.     

Spectroscopic and electrochemical characterization of cytochrome <Emphasis Type="Italic">c</Emphasis> encapsulated in a bio sol–gel matrix

Sol-gel technique represents a remarkably versatile method for protein encapsulation. To enhance sol-gel biocompatibility, systems envisaging the presence of calcium and phosphates in the sol-gel composition were recently prepared and investigated. Unfortunately, the low pH at which solutions were prepared (pH < 2.5) dramatically limited their application to proteins, because the acidic environment induces protein denaturation. In this paper we apply a new protocol based on the introduction of calcium nitrate to the inorganic phase, with formation of a binary bioactive system. In this case protein encapsulation results versatile and secure, being achieved at a pH close to neutrality (pH 6.0); also, the presence of calcium is expected to enhance system biocompatibility. To determine the properties of the salt-doped sol-gel and the influence exerted on entrapped biosystems, the structural and functional properties of embedded cytochrome c have been investigated. Data obtained indicate that the salt-doped sol-gel induces no significant change in the structure and the redox properties of the embedded protein; also, the matrix increases protein stability. Interestingly, the presence of calcium nitrate appears determinant for refolding of the acid-denatured protein. This is of interest in the perspective of future applications in biosensoristic area.     

Recent advances in applied and mechanistic aspects of the enzymatic hydroxylation of steroids by whole-cell biocatalysts.

Recent advances in microbial steroid hydroxylation are covered, including new biocatalysts and substrate groups and new methodologies such as the use of low-water systems, immobilised biocatalysts, genetically constructed biocatalysts and enzyme mimics. Mechanistic factors that control the regiochemistry and stereochemistry of steroid hydroxylation are also discussed.     

Heme-iron oxygenases: powerful industrial biocatalysts?

Are cytochrome P450 enzymes powerful industrial biocatalysts? Next to market demands, well-defined enzyme functionalities and process parameters allow generalizations on the basis of process windows. These can provide useful guidelines for the design of improved biocatalysts. Oxygenase-catalyzed reactions are of special interest for selective C-H bond oxidation. The versatile class of cytochrome P450 mono-oxygenases attracts particular attention, and impressive advances have been achieved with respect to mechanistic insight, enzyme activity, stability, and specificity. Recent major achievements include significant increases in productivities, yields, and rates of catalytic turnover as well as modification of substrate specificity and efficient multistep reactions in whole-cell biocatalysts. For some biocatalysts, these parameters are already of an industrially useful magnitude.     

Sol-gel encapsulation: an efficient and versatile immobilization technique for cutinase in non-aqueous media

Cutinase from Fusarium solani pisi was encapsulated in sol-gel matrices prepared with a combination of alkyl-alkoxysilane precursors of different chain-lengths. The specific activity of cutinase in a model transesterification reaction at fixed water activity in n-hexane was highest for the precursor combination tetramethoxysilane/n-butyltrimetoxysilane (TMOS/BTMS) in a 1:5 ratio, lower and higher chain lengths of the mono-alkylated precursor or decreasing proportions of the latter relative to TMOS leading to lower enzyme activity. Results obtained using combinations of three precursors confirmed the beneficial effect of the presence of BTMS in the preparations. Scanning electron microscopy of the 1:5 TMOS/n-alkylTMS gels showed a direct correlation between the macropore dimensions and the alkyl chain length of the alkylated precursor and revealed that TMOS/n-octylTMS gels suffered extensive pore collapse during the drying process. The specific activity of TMOS/BTMS sol-gel entrapped cutinase was similar to that exhibited by the enzyme immobilized by adsorption on zeolite NaY. However, the incorporation of different additives (zeolites, silica, Biogel, grinded sol-gel, etc.) having in common the capability to react with residual silanol groups of the sol-gel matrix brought about remarkable enhancements of cutinase activity, despite the fact that the global porosity of the gels did not change. The behavior of the gels in supercritical CO 2 (sc-CO 2) paralleled that exhibited in n-hexane, although cutinase activity was ca. one order of magnitude lower (i.e. sol-gel encapsulation did not prevent the deleterious effect of CO 2. The impact that functionalization of some of the additives had on cutinase activity indicates that the enzyme/matrix interactions must play an important role. Some of the best additives from the standpoint of enzyme activity were also the best from the standpoint of its operational stability (ca. 80% retention of enzyme activity at the tenth reutilization cycle). None of the additives that proved effective for cutinase could improve the catalytic activity of sol-gel encapsulated Pseudomonas cepacia lipase.     

Aqueous sol-gel encapsulation of genetically engineered Moraxella spp. cells for the detection of organophosphates

An all-aqueous sol-gel method for encapsulation of bacterial cells in porous silicate matrices towards the development of a biosensor is described. The sol-gel encapsulation of cells is achieved at room temperature and neutral pH. Furthermore, use of sodium silicate as precursor avoids generation of alcohol that can be detrimental to cells in contrast to the traditional alkoxide sol-gel encapsulation process. Moraxella spp. cells engineered to express recombinant organophosphorus hydrolase (OPH) on the cell surface were encapsulated and OPH enzymatic activity was measured for paraoxon hydrolysis. Kinetic parameters (Km and Vmax) as well as pH behavior of surface-expressed OPH were determined to evaluate the effect of encapsulation. Cells encapsulated by the sodium silicate method displayed higher activity retention compared to those by the traditional alkoxide process. Time-course studies over a 2-month period indicate that immobilization through the sodium silicate process led to a reduction in activity of approximately 5% as compared to approximately 30% activity reduction in case of free cells in buffer indicating that immobilization leads to stabilization, a key parameter in biosensor development.